We introduce the same handling for potential data races with the
'fully_established' flag in subflow as previously done for
msk->fully_established.
Additionally, we make a crucial change: convert the subflow's
'fully_established' from 'bit_field' to 'bool' type. This is
necessary because methods for avoiding data races don't work well
with 'bit_field'. Specifically, the 'READ_ONCE' needs to know
the size of the variable being accessed, which is not supported in
'bit_field'. Also, 'test_bit' expect the address of 'bit_field'.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/516
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-2-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the `struct ieee80211_chanctx_conf conf` to the end of
`struct ieee80211_chanctx` and fix a memory corruption bug
triggered e.g. in `hwsim_set_chanctx_magic()`: `radar_detected`
is being overwritten when `cp->magic = HWSIM_CHANCTX_MAGIC;`
See the function call sequence below:
drv_add_chanctx(... struct ieee80211_chanctx *ctx) ->
local->ops->add_chanctx(&local->hw, &ctx->conf) ->
mac80211_hwsim_add_chanctx(... struct ieee80211_chanctx_conf *ctx) ->
hwsim_set_chanctx_magic(ctx)
This also happens in a number of other drivers.
Also, add a code comment to try to prevent people from introducing
new members after `struct ieee80211_chanctx_conf conf`. Notice that
`struct ieee80211_chanctx_conf` is a flexible structure --a structure
that contains a flexible-array member, so it should always be at
the end of any other containing structures.
This change also fixes 50 of the following warnings:
net/mac80211/ieee80211_i.h:895:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Fixes: bca8bc0399 ("wifi: mac80211: handle ieee80211_radar_detected() for MLO")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZxwWPrncTeSi1UTq@kspp
[also refer to other drivers in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wireless fixes for v6.12-rc5
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
Pull bpf fixes from Daniel Borkmann:
- Fix an out-of-bounds read in bpf_link_show_fdinfo for BPF sockmap
link file descriptors (Hou Tao)
- Fix BPF arm64 JIT's address emission with tag-based KASAN enabled
reserving not enough size (Peter Collingbourne)
- Fix BPF verifier do_misc_fixups patching for inlining of the
bpf_get_branch_snapshot BPF helper (Andrii Nakryiko)
- Fix a BPF verifier bug and reject BPF program write attempts into
read-only marked BPF maps (Daniel Borkmann)
- Fix perf_event_detach_bpf_prog error handling by removing an invalid
check which would skip BPF program release (Jiri Olsa)
- Fix memory leak when parsing mount options for the BPF filesystem
(Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Check validity of link->type in bpf_link_show_fdinfo()
bpf: Add the missing BPF_LINK_TYPE invocation for sockmap
bpf: fix do_misc_fixups() for bpf_get_branch_snapshot()
bpf,perf: Fix perf_event_detach_bpf_prog error handling
selftests/bpf: Add test for passing in uninit mtu_len
selftests/bpf: Add test for writes to .rodata
bpf: Remove MEM_UNINIT from skb/xdp MTU helpers
bpf: Fix overloading of MEM_UNINIT's meaning
bpf: Add MEM_WRITE attribute
bpf: Preserve param->string when parsing mount options
bpf, arm64: Fix address emission with tag-based KASAN enabled
Pull networking fixes from Paolo Abeni:
"Including fixes from netfiler, xfrm and bluetooth.
Oddly this includes a fix for a posix clock regression; in our
previous PR we included a change there as a pre-requisite for
networking one. That fix proved to be buggy and requires the follow-up
included here. Thomas suggested we should send it, given we sent the
buggy patch.
Current release - regressions:
- posix-clock: Fix unbalanced locking in pc_clock_settime()
- netfilter: fix typo causing some targets not to load on IPv6
Current release - new code bugs:
- xfrm: policy: remove last remnants of pernet inexact list
Previous releases - regressions:
- core: fix races in netdev_tx_sent_queue()/dev_watchdog()
- bluetooth: fix UAF on sco_sock_timeout
- eth: hv_netvsc: fix VF namespace also in synthetic NIC
NETDEV_REGISTER event
- eth: usbnet: fix name regression
- eth: be2net: fix potential memory leak in be_xmit()
- eth: plip: fix transmit path breakage
Previous releases - always broken:
- sched: deny mismatched skip_sw/skip_hw flags for actions created by
classifiers
- netfilter: bpf: must hold reference on net namespace
- eth: virtio_net: fix integer overflow in stats
- eth: bnxt_en: replace ptp_lock with irqsave variant
- eth: octeon_ep: add SKB allocation failures handling in
__octep_oq_process_rx()
Misc:
- MAINTAINERS: add Simon as an official reviewer"
* tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: dsa: mv88e6xxx: support 4000ps cycle counter period
net: dsa: mv88e6xxx: read cycle counter period from hardware
net: dsa: mv88e6xxx: group cycle counter coefficients
net: usb: qmi_wwan: add Fibocom FG132 0x0112 composition
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
net: dsa: microchip: disable EEE for KSZ879x/KSZ877x/KSZ876x
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime()
r8169: avoid unsolicited interrupts
net: sched: use RCU read-side critical section in taprio_dump()
net: sched: fix use-after-free in taprio_change()
net/sched: act_api: deny mismatched skip_sw/skip_hw flags for actions created by classifiers
net: usb: usbnet: fix name regression
mlxsw: spectrum_router: fix xa_store() error checking
virtio_net: fix integer overflow in stats
net: fix races in netdev_tx_sent_queue()/dev_watchdog()
net: wwan: fix global oob in wwan_rtnl_policy
netfilter: xtables: fix typo causing some targets not to load on IPv6
...
In a later patch, the task local storage will only accept uptr
from the syscall update_elem and will not accept uptr from
the bpf prog. The reason is the bpf prog does not have a way
to provide a valid user space address.
bpf_local_storage_update() and bpf_selem_alloc() are used by
both bpf prog bpf_task_storage_get(BPF_LOCAL_STORAGE_GET_F_CREATE)
and bpf syscall update_elem. "bool swap_uptrs" arg is added
to bpf_local_storage_update() and bpf_selem_alloc() to tell if
it is called by the bpf prog or by the bpf syscall. When
swap_uptrs==true, it is called by the syscall.
The arg is named (swap_)uptrs because the later patch will swap
the uptrs between the newly allocated selem and the user space
provided map_value. It will make error handling easier in case
map->ops->map_update_elem() fails and the caller can decide
if it needs to unpin the uptr in the user space provided
map_value or the bpf_local_storage_update() has already
taken the uptr ownership and will take care of unpinning it also.
Only swap_uptrs==false is passed now. The logic to handle
the true case will be added in a later patch.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now only __dev_get_by_index() depends on RTNL in route_doit().
Let's use dev_get_by_index_rcu() and register route_doit() with
RTNL_FLAG_DOIT_UNLOCKED.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
route_doit() calls phonet_route_add() or phonet_route_del()
for RTM_NEWROUTE or RTM_DELROUTE, respectively.
Both functions only touch phonet_pernet(dev_net(dev))->routes,
which is currently protected by RTNL and its dedicated mutex,
phonet_routes.lock.
We will convert route_doit() to RCU and cannot use mutex inside RCU.
Let's convert the mutex to spinlock_t.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, rtm_phonet_notify() fetches netns and ifindex from dev.
Once route_doit() is converted to RCU, rtm_phonet_notify() will be
called outside of RCU due to GFP_KERNEL, and dev will be unavailable
there.
Let's pass net and ifindex to rtm_phonet_notify().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will convert route_doit() to RCU.
route_doit() will call rtm_phonet_notify() outside of RCU due
to GFP_KERNEL, so dev will not be available in fill_route().
Let's pass ifindex directly to fill_route().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
getaddr_dumpit() already relies on RCU and does not need RTNL.
Let's use READ_ONCE() for ifindex and register getaddr_dumpit()
with RTNL_FLAG_DUMP_UNLOCKED.
While at it, the retval of getaddr_dumpit() is changed to combine
NLMSG_DONE and save recvmsg() as done in 58a4ff5d77 ("phonet: no
longer hold RTNL in route_dumpit()").
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now only __dev_get_by_index() depends on RTNL in addr_doit().
Let's use dev_get_by_index_rcu() and register addr_doit() with
RTNL_FLAG_DOIT_UNLOCKED.
While at it, I changed phonet_rtnl_msg_handlers[]'s init to C99
style like other core networking code.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
addr_doit() calls phonet_address_add() or phonet_address_del()
for RTM_NEWADDR or RTM_DELADDR, respectively.
Both functions only touch phonet_device_list(dev_net(dev)),
which is currently protected by RTNL and its dedicated mutex,
phonet_device_list.lock.
We will convert addr_doit() to RCU and cannot use mutex inside RCU.
Let's convert the mutex to spinlock_t.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, phonet_address_notify() fetches netns and ifindex from dev.
Once addr_doit() is converted to RCU, phonet_address_notify() will be
called outside of RCU due to GFP_KERNEL, and dev will be unavailable
there.
Let's pass net and ifindex to phonet_address_notify().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will convert addr_doit() and getaddr_dumpit() to RCU, both
of which call fill_addr().
The former will call phonet_address_notify() outside of RCU
due to GFP_KERNEL, so dev will not be available in fill_addr().
Let's pass ifindex directly to fill_addr().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: Disable works on hci_unregister_dev
- SCO: Fix UAF on sco_sock_timeout
- ISO: Fix UAF on iso_sock_timeout
* tag 'for-net-2024-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
====================
Link: https://patch.msgid.link/20241023143005.2297694-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Steffen Klassert says:
====================
pull request (net): ipsec 2024-10-22
1) Fix routing behavior that relies on L4 information
for xfrm encapsulated packets.
From Eyal Birger.
2) Remove leftovers of pernet policy_inexact lists.
From Florian Westphal.
3) Validate new SA's prefixlen when the selector family is
not set from userspace.
From Sabrina Dubroca.
4) Fix a kernel-infoleak when dumping an auth algorithm.
From Petr Vaganov.
Please pull or let me know if there are problems.
ipsec-2024-10-22
* tag 'ipsec-2024-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix one more kernel-infoleak in algo dumping
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
xfrm: policy: remove last remnants of pernet inexact list
xfrm: respect ip protocols rules criteria when performing dst lookups
xfrm: extract dst lookup parameters into a struct
====================
Link: https://patch.msgid.link/20241022092226.654370-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current flow in _ieee80211_set_active_links() does not align with the
operational requirements of drivers that groups multiple hardware
under a single wiphy. These drivers (e.g ath12k) rely on channel
assignment to determine the appropriate hardware for each link. Without
this, the drivers cannot correctly establish the link interface.
Currently in _ieee80211_set_active_links(), after calling
drv_change_vif_links() on the driver, the state of all connected stations
is updated via drv_change_sta_links(). This is followed by handling keys
in the links, and finally, assigning the channel to the links.
Consequently, drv_change_sta_links() prompts drivers to create the station
entry at their level and within their firmware. However, since channels
have not yet been assigned to links at this stage, drivers have not
created the necessary link interface for establishing link stations,
leading to failures in activating the links.
Therefore, re-order the logic so that after drv_change_vif_links() and
removing the old links, channels are assigned to newly added links.
Following this, the flow proceeds to station handling.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20241001085034.2745669-1-quic_adisi@quicinc.com
[Johannes: fix iwlwifi to deal with the changes]
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is useful for multi-radio devices that are capable of monitoring on
multiple channels simultanenously. When this flag is set, each monitor
interface is passed to the driver individually and can have a configured
channel.
The vif mac address for non-active monitor interfaces is cleared, in order
to allow the driver to tell them apart from active ones.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/3c55505ee0cf0a5f141fbcb30d1e8be8d9f40373.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows users to prevent a vif from affecting radios other than the
configured ones. This can be useful in cases where e.g. an AP is running
on one radio, and triggering a scan on another radio should not disturb it.
Changing the allowed radios list for a vif is supported, but only while
it is down.
While it is possible to achieve the same by always explicitly specifying
a frequency list for scan requests and ensuring that the wrong channel/band
is never accidentally set on an unrelated interface, this change makes
multi-radio wiphy setups a lot easier to deal with for CLI users.
By itself, this patch only enforces the radio mask for scanning requests
and remain-on-channel. Follow-up changes build on this to limit configured
frequencies.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/eefcb218780f71a1549875d149f1196486762756.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to deal with (temporary) bandwidth reductions to/from
the AP such as the upcoming RX OMI changes, modify the min_def
calculation to also not take the chanreq width into account in
client mode. This normally changes nothing as the AP bandwidth
will be the same as the channel request's width. In the RX OMI
changes, however, the code will reduce the bandwidth for only
the AP STA, since the OMI is only to that, and TDLS STAs are
unaffected. Using the min_def for this case simplifies RX OMI
a lot.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.95a39c4f6f45.I2e7517fb1a7221dc6f60b0c752e4882042b4265d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Andrei previously fixed an issue in the client where the NSS
for links other than the primary/assoc/deflink isn't set. The
same issue appears to exist on the AP side, because there's
only a call to rate_control_rate_init() for the deflink, and
not any other links.
Rework the code a bit to do rate_control_rate_init() for links,
even if it really doesn't work with software rate control yet,
it does other things as well.
Also add rate_control_rate_init_all_links() to actually do it
properly when moving to ASSOC state in cfg80211.
Change the explicit call to ieee80211_sta_init_nss() to instead
be rate_control_rate_init() now in the client code, but also
add a call to rate_control_rate_init() when a link is added in
AP mode and the STA is already associated.
This should fix the NSS initialization issue, and perhaps pave
the way for actual software rate scaling a bit, in case anyone
cares in the future, but that of course needs a lot more than
just the init call.
We still need to fix the rate control _update_ as well, and the
sta_rc_update() driver method especially, but that will be in a
different patch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.c693274a908f.I0376da02e9f5a30eaa1b5d0d01371ff09506d453@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
