The SDM845 has two resets but the DP configuration erroneously described
only one.
In case the DP part of the PHY is initialised before the USB part (e.g.
depending on probe order), then only the first reset would be asserted.
Add a dedicated configuration for SDM845 rather than reuse the
incompatible SC7180 configuration.
Fixes: d88497fb6b ("phy: qualcomm: phy-qcom-qmp: add support for combo USB3+DP phy on SDM845")
Cc: stable@vger.kernel.org # 6.1
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221114081346.5116-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit af6643242d ("phy: qcom-qmp-pcie: split pcs_misc region for ipq6018
pcie gen3") reworked the pcs regs values and removed the 0x400 offset
for each pcs_misc regs.
This change caused the malfunction of ipq8074 downstream since it still
has the legacy pcs table where pcs_misc are not placed on a different
table and instead put together assuming the offset of 0x400 for the
related pcs_misc regs.
Split pcs_misc init cfg from the ipq8074 pcs init table to be handled
correctly to prepare for actual support for gen3 pcie for ipq8074.
Fixes: af6643242d ("phy: qcom-qmp-pcie: split pcs_misc region for ipq6018 pcie gen3")
Reported-by: Robert Marko <robimarko@gmail.com>
Tested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20221103212125.17156-1-ansuelsmth@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the missing delay after asserting reset. This is specifically needed
for the reset to have any effect on SC8280XP.
The vendor driver uses a 1 ms delay, but that seems a bit excessive.
Instead use a 200 us delay which appears to be more than enough and also
matches the UFS reset delay added by commit 870b1279c7 ("scsi:
ufs-qcom: Add reset control support for host controller").
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221105145939.20318-14-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since the QMP driver split there will be at most a single child node so
drop the obsolete iteration construct.
While at it, drop the verbose error logging that would have been
printed also on probe deferrals.
Note that there's no need to check if there are additional child nodes
(the kernel is not a devicetree validator), but let's return an error if
there are no child nodes at all for now.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221105145939.20318-5-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Each of the CPSW9G ports in J721e support additional modes like QSGMII.
Add a new compatible for J721e to support the additional modes.
In TI's J721e, each of the CPSW9G ethernet interfaces can act as a
QSGMII main or QSGMII-SUB port. The QSGMII main interface is responsible
for performing auto-negotiation between the MAC and the PHY while the rest
of the interfaces are designated as QSGMII-SUB interfaces, indicating that
they will not be taking part in the auto-negotiation process.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20221026074532.109220-4-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The number of QSGMII main ports are specific to the device. TI's J7200 for
which the QSGMII main port property is fetched from the device-tree has
only one QSGMII main port. However, devices like TI's J721e support up to
two QSGMII main ports. Thus, the existing methods for fetching and using
the QSGMII main port are not scalable.
Update the existing methods for handling the QSGMII main ports and its
associated requirements to make it scalable for future devices.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20221026074532.109220-3-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The USB PHY used in the Allwinner H616 SoC inherits some traits from its
various predecessors: it has four full PHYs like the H3, needs some
extra bits to be set like the H6, and puts SIDDQ on a different bit like
the A100. Plus it needs this weird PHY2 quirk.
Name all those properties in a new config struct and assign a new
compatible name to it.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221031111358.3387297-5-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
At least the Allwinner H616 SoC requires a weird quirk to make most
USB PHYs work: Only port2 works out of the box, but all other ports
need some help from this port2 to work correctly: The CLK_BUS_PHY2 and
RST_USB_PHY2 clock and reset need to be enabled, and the SIDDQ bit in
the PMU PHY control register needs to be cleared. For this register to
be accessible, CLK_BUS_ECHI2 needs to be ungated. Don't ask ....
Instead of disguising this as some generic feature, treat it more like
a quirk (what it really is):
If the quirk bit is set, and we initialise a PHY other than PHY2, ungate
this one special clock, and clear the SIDDQ bit. We also pick the clock
and reset from PHY2 and enable them as well.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20221031111358.3387297-4-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Split port modes into two different variables. Supported port modes
is what the hardware supports. While port mode is how the hardware
is currently configured and can be dynamically changed through the
sysfs. We initialize all supported port modes on init even though
the port mode may not be selected because we cannot guarantee the
downstream interface from the phy will be active or not.
This also fixes an issue where port modes selected via sysfs were
not being saved through suspend/resume.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/1665005418-15807-2-git-send-email-justinpopo6@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for the new SC8280XP binding.
Note that the binding does not try to describe every register subregion
and instead the driver holds the corresponding offsets. This includes
the PCS_USB region which was initially overlooked.
Note that the driver will no longer accept the old binding due to the
fixed "phy_phy" reset name.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221028160435.26948-14-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since the QMP driver split there will be at most a single child node so
drop the obsolete iteration construct.
While at it, drop the verbose error logging that would have been
printed also on probe deferrals.
Note that there's no need to check if there are additional child nodes
(the kernel is not a devicetree validator), but let's return an error if
there are no child nodes at all for now.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221028160435.26948-7-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The PCS_USB register block lives at an offset of 0x1000 from the PCS
region on SC8280XP so add the missing offset to avoid corrupting
unrelated registers on runtime suspend.
Note that the current binding is broken as it does not describe the
PCS_USB region and the PCS register size does not cover PCS_USB and the
regions in between. As Linux currently maps full pages, simply adding
the offset to driver works until the binding has been fixed.
Fixes: c0c7769cda ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221028160435.26948-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
