In drivers/hid/, most drivers depend on CONFIG_HID, while a couple of the
drivers in subdirectories instead depend on CONFIG_HID_SUPPORT and use
'select HID'. With the newly added INTEL_THC_HID, this causes a build
warning for a circular dependency:
WARNING: unmet direct dependencies detected for HID
Depends on [m]: HID_SUPPORT [=y] && INPUT [=m]
Selected by [y]:
- INTEL_THC_HID [=y] && HID_SUPPORT [=y] && X86_64 [=y] && PCI [=y] && ACPI [=y]
WARNING: unmet direct dependencies detected for INPUT_FF_MEMLESS
Depends on [m]: INPUT [=m]
Selected by [y]:
- HID_MICROSOFT [=y] && HID_SUPPORT [=y] && HID [=y]
- GREENASIA_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_GREENASIA [=y]
- HID_WIIMOTE [=y] && HID_SUPPORT [=y] && HID [=y] && LEDS_CLASS [=y]
- ZEROPLUS_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_ZEROPLUS [=y]
Selected by [m]:
- HID_ACRUX_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_ACRUX [=m]
- HID_EMS_FF [=m] && HID_SUPPORT [=y] && HID [=y]
- HID_GOOGLE_STADIA_FF [=m] && HID_SUPPORT [=y] && HID [=y]
- PANTHERLORD_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_PANTHERLORD [=m]
It's better to be consistent and always use 'depends on HID' for HID
drivers. The notable exception here is USB_KBD/USB_MOUSE, which are
alternative implementations that do not depend on the HID subsystem.
Do this by extending the "if HID" section below, which means that a few
of the duplicate "depends on HID" and "depends on INPUT" statements
can be removed in the process.
Fixes: 1b2d05384c ("HID: intel-thc-hid: Add basic THC driver skeleton")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The ISH driver performs a clock sync with the firmware once at system
startup and then every 20 seconds. If a firmware reset occurs right
after a clock sync, the driver would wait 20 seconds before performing
another clock sync with the firmware. This is particularly problematic
with the introduction of the "load firmware from host" feature, where
the driver performs a clock sync with the bootloader and then has to
wait 20 seconds before syncing with the main firmware.
This patch clears prev_sync immediately upon receiving an IPC reset,
so that the main firmware and driver will perform a clock sync
immediately after completing the IPC handshake.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The timestamps in the Firmware log and HID sensor samples are incorrect.
They show 1970-01-01 because the current IPC driver only uses the first
8 bytes of bootup time when synchronizing time with the firmware. The
firmware converts the bootup time to UTC time, which results in the
display of 1970-01-01.
In write_ipc_from_queue(), when sending the MNG_SYNC_FW_CLOCK message,
the clock is updated according to the definition of ipc_time_update_msg.
However, in _ish_sync_fw_clock(), the message length is specified as the
size of uint64_t when building the doorbell. As a result, the firmware
only receives the first 8 bytes of struct ipc_time_update_msg.
This patch corrects the length in the doorbell to ensure the entire
ipc_time_update_msg is sent, fixing the timestamp issue.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
ishtp_cl_get_tx_free_buffer_size() and ishtp_cl_get_tx_free_rings()
were added in 2018 by
commit 18c0b54674 ("HID: intel_ish-hid: Enhance API to get ring buffer
sizes")
but have remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
ishtp_cl_tx_empty() was added in 2018 by
commit a1c40ce62f ("HID: intel-ish-hid: ishtp: add helper functions for
client buffer operation") but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
ishtp_dev_state_str() was added in 2016 by
commit 3703f53b99 ("HID: intel_ish-hid: ISH Transport layer")
but has never been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Introduce sysfs attributes to the intel-ish-ipc driver to expose the base
and project firmware versions for ISH devices that load firmware from the
host.
The build tool embeds these versions into the ISH global manifest within
the firmware binary during the firmware build process. The driver, upon
loading the firmware, extracts this version information from the manifest
and makes it accessible via sysfs. The base version corresponds to the
firmware version provided in Intel's Firmware Development Kit (FDK), while
the project version reflects the vendor-customized firmware derived from
the FDK.
These attributes provide userspace tools and applications with the
ability to easily query the firmware versions, which is essential for
firmware validation and troubleshooting.
Example usages:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/firmware/base_version
5.8.0.7716
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/firmware/project_version
5.8.0.12472
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
One-element arrays as fake flex arrays are deprecated[1] as the kernel
has switched to C99 flexible-array members instead. This case, however,
has more complexity because it is a flexible array of flexible arrays
and this patch needs to be ready to enable the new compiler flag
-Wflex-array-member-not-at-end (coming in GCC-14) globally.
So, define a new struct type for the single reports:
struct report {
uint16_t size;
struct hostif_msg_hdr msg;
} __packed;
but without the payload (flex array) in it. And add this payload to the
"hostif_msg" structure. This way, in the "report_list" structure we can
declare a flex array of single reports which now do not contain another
flex array.
struct report_list {
[...]
struct report reports[];
} __packed;
Therefore, the "struct hostif_msg" is now made up of a header and a
payload. And the "struct report" uses only the "hostif_msg" header.
The perfect solution would be for the "report" structure to use the
whole "hostif_msg" structure but this is not possible due to nested
flexible arrays. Anyway, the end result is equivalent since this patch
does attempt to change the behaviour of the code.
Now as well, we have more clarity after the cast from the raw bytes to
the new structures. Refactor the code accordingly to use the new
structures.
Also, use "container_of()" whenever we need to retrieve a pointer to
the flexible structure, through which we can access the flexible array
if needed.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#zero-length-and-one-element-arrays [1]
Closes: https://github.com/KSPP/linux/issues/333
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Link: https://lore.kernel.org/r/AS8PR02MB723760CB93942370E92F00638BF72@AS8PR02MB7237.eurprd02.prod.outlook.com
[kees: tweaked commit log and dropped struct_size() uses]
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Fix the uninitialized symbol 'rv' in the function ish_fw_xfer_direct_dma
to resolve the following warning from the smatch tool:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:714 ish_fw_xfer_direct_dma()
error: uninitialized symbol 'rv'.
Initialize 'rv' to 0 to prevent undefined behavior from uninitialized
access.
Cc: stable@vger.kernel.org
Fixes: 91b228107d ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: SurajSonawane2415 <surajsonawane0215@gmail.com>
Link: https://patch.msgid.link/20241004075944.44932-1-surajsonawane0215@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Enhance the firmware loader to support the loading of vendor-specific
customized firmware for the Intel Integrated Sensor Hub (ISH). The
loader now constructs firmware file names based on the DMI_SYS_VENDOR,
DMI_PRODUCT_NAME, and DMI_PRODUCT_SKU information in Desktop Management
Interface (DMI). The loader will attempt to load the firmware files
following a specific naming convention in sequence. If successful, it
will skip the remaining files.
For more details, please refer to Documentation/hid/intel-ish-hid.rst.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
ISH allows vendors to customize ISH firmware. To differentiate different
vendors and load the correct firmware, Intel defined a firmware file
name format. As part of the filename, there is a "generation" string. To
load correct format the driver must know the generation name to create
file name.
In the absence of any vendor specific firmware, default ISH firmware is
loaded.
Currently full ISH firmware file name is stored as part of driver data.
This file name already includes the generation name. For example, for
Lunar Lake, the name is ish_lnlm.bin, where "lnlm" is the generation.
So instead of storing both generation name and ISH default firmware file
name, just store generation name and create the default ISH firmware
file name string during initialization.
No functional changes are expected.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The newly added file causes a ton of sparse warnings about the
incorrect use of __le32 and similar types:
drivers/hid/intel-ish-hid/ishtp/loader.h:41:23: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:42:27: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:43:24: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:44:24: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:45:22: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.c:172:33: warning: restricted __le32 degrades to integer
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: warning: incorrect type in assignment (different base types)
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: expected restricted __le32 [usertype] length
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: got unsigned long
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: warning: incorrect type in assignment (different base types)
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: expected restricted __le32 [usertype] fw_off
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: got unsigned int [usertype] offset
drivers/hid/intel-ish-hid/ishtp/loader.c:180:17: warning: cast from restricted __le32
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: warning: invalid assignment: +=
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: left side has type unsigned int
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: right side has type restricted __le32
Add the necessary conversions and use temporary variables where appropriate
to avoid converting back.
Fixes: 579a267e46 ("HID: intel-ish-hid: Implement loading firmware from host feature")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhang Lixu <lixu.zhang@intel.com>
Tested-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
kernel test robot reported build error due to a pointer type mismatch:
.../ishtp/loader.c:172:8: error: incompatible pointer types passing
'__le64 *' (aka 'unsigned long long *') to parameter of type
'dma_addr_t *' (aka 'unsigned int *')
The issue arises because the driver, which is primarily intended for
x86-64, is also built for i386 when COMPILE_TEST is enabled.
Resolve type mismatch by using a temporary dma_addr_t variable to hold
the DMA address. Populate this temporary variable in dma_alloc_coherent()
function, and then convert and store the address in the
fragment->fragment_tbl[i].ddr_adrs field in the correct format.
Similarly, convert the ddr_adrs field back to dma_addr_t when freeing
the DMA buffer with dma_free_coherent().
Fixes: 579a267e46 ("HID: intel-ish-hid: Implement loading firmware from host feature")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405201313.SAStVPrT-lkp@intel.com/
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Add a check for the return value of pci_alloc_irq_vectors() and return
error if it fails.
[jkosina@suse.com: reworded changelog based on Srinivas' suggestion]
Fixes: 74fbc7d371 ("HID: intel-ish-hid: add MSI interrupt support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch enhances the firmware reset handler in the Intel Integrated
Sensor Hub (ISH) driver. Previously, the ISH firmware would send a
MNG_RESET_NOTIFY message in response to an empty IPC message from the
ish_wakeup function. With the introduction of the feature to load ISH
firmware from the host on the LunarLake platform, the ISH bootloader
now involves the IPC function. This results in an additional
MNG_RESET_NOTIFY message being sent by ISH bootloader after power on.
Consequently, the driver receives two MNG_RESET_NOTIFY messages during
system boot up. This can disrupt the dev->dev_state during the first
reset flow due to the subsequent reset notify message.
To address this, the patch modifies the fw_reset_work_fn function to skip
the execution of ishtp_reset_compl_handler during the first reset flow if
a reset is pending. The ishtp_reset_compl_handler will then be executed
during the second reset flow, ensuring the dev->dev_state is not disrupted.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Starting from the Lunar Lake generation, the ISH firmware has been
divided into two components for better space optimization and increased
flexibility. These components include a bootloader that is integrated
into the BIOS, and a main firmware that is stored within the operating
system's file system.
Introduce support for loading ISH main firmware from host. This feature is
applicable for Lunar Lake and later generation.
Current intel-ishtp-loader, is designed for Chrome OS based systems which
uses core boot and has different firmware loading method. For non chrome
systems the ISH firmware loading uses different method.
Key differences include:
1. The new method utilizes ISHTP capability/fixed client to enumerate the
firmware loader function. It does not require a connection or flow control,
unlike the method used in Chrome OS, which is enumerated as an ISHTP
dynamic client driver, necessitating connect/disconnect operations and flow
control.
2. The new method employs a table to describe firmware fragments, which are
sent to ISH in a single operation. Conversely, the Chrome OS method sends
firmware fragments in multiple operations within a loop, sending only one
fragment at a time.
Additionally, address potential error scenarios to ensure graceful failure
handling.
- Firmware Not Found: Triggers if request_firmware() fails, leaving ISH in
a waiting state.
Recovery: Re-insmod the ISH drivers to retry.
- DMA Buffer Allocation Failure: Occurs during prepare_dma_bufs(), leading
to ISH waiting state. Allocated resources are released.
Recovery: Re-insmod the ISH drivers to retry.
- Incorrect Firmware Image: Causes ISH to refuse loading after three failed
attempts.
Recovery: A platform reset is required.
Please refer to the [Documentation](Documentation/hid/intel-ish-hid.rst)
for the details on flows.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Introduces a new structure, ishtp_driver_data, to hold driver-specific
data, including the firmware filename for different hardware variants of
the Intel Integrated Sensor Hub (ISH).
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The variable dev->devc in ish_dev_init was utilized by dev_err before it
was properly assigned. To rectify this, the assignment of dev->devc has
been moved to immediately follow memory allocation.
Without this change "(NULL device *)" is printed for device information.
Fixes: 8ae2f2b0a2 ("HID: intel-ish-hid: ipc: Fix potential use-after-free in work function")
Fixes: ae02e5d40d ("HID: intel-ish-hid: ipc layer")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
After legacy suspend/resume via ACPI S3, sensor read operation fails
with timeout. Also, it will cause delay in resume operation as there
will be retries on failure.
This is caused by commit f645a90e8f ("HID: intel-ish-hid:
ishtp-hid-client: use helper functions for connection"), which used
helper functions to simplify connect, reset and disconnect process.
Also avoid freeing and allocating client buffers again during reconnect
process.
But there is a case, when ISH firmware resets after ACPI S3 suspend,
ishtp bus driver frees client buffers. Since there is no realloc again
during reconnect, there are no client buffers available to send connection
requests to the firmware. Without successful connection to the firmware,
subsequent sensor reads will timeout.
To address this issue, ishtp bus driver does not free client buffers on
warm reset after S3 resume. Simply add the buffers from the read list
to free list of buffers.
Fixes: f645a90e8f ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218442
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Since PCI core and ACPI core already handles PCI PME wake and GPE wake
when the device has wakeup capability, use device_init_wakeup() to let
them do the wakeup setting work.
Also add a shutdown callback which uses pci_prepare_to_sleep() to let
PCI and ACPI set OOB wakeup for S5.
Cc: Jian Hui Lee <jianhui.lee@canonical.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use helper functions ishtp_cl_establish_connection() and
ishtp_cl_destroy_connection() to establish and destroy connection
respectively. These functions are used during initialization, reset and
deinitialization flows.
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use helper functions ishtp_cl_establish_connection() and
ishtp_cl_destroy_connection() to establish and destroy connection
respectively. These functions are used during initialization, reset and
deinitialization flows.
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
For every ishtp client driver during initialization state, the flow is:
1 - Allocate an ISHTP client instance
2 - Reserve a host id and link the client instance
3 - Search a firmware client using UUID and get related
client information
4 - Bind firmware client id to the ISHTP client instance
5 - Set the state the ISHTP client instance to CONNECTING
6 - Send connect request to firmware
7 - Register event callback for messages from the firmware
During deinitizalization state, the flow is:
9 - Set the state the ISHTP client instance to ISHTP_CL_DISCONNECTING
10 - Issue disconnect request to firmware
11 - Unlike the client instance
12 - Flush message queue
13 - Free ISHTP client instance
Step 2-7 are identical to the steps of client driver initialization
and driver reset flow, but reallocation of the RX/TX ring buffers
can be avoided in reset flow.
Also for step 9-12, they are identical to the steps of client driver
failure handling after connect request, driver reset flow and
driver removing.
So, add two helper functions to simplify client driver code.
ishtp_cl_establish_connection()
ishtp_cl_destroy_connection()
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The EHL (Elkhart Lake) based platforms provide a OOB (Out of band)
service, which allows to wakup device when the system is in S5 (Soft-Off
state). This OOB service can be enabled/disabled from BIOS settings. When
enabled, the ISH device gets PME wake capability. To enable PME wakeup,
driver also needs to enable ACPI GPE bit.
On resume, BIOS will clear the wakeup bit. So driver need to re-enable it
in resume function to keep the next wakeup capability. But this BIOS
clearing of wakeup bit doesn't decrement internal OS GPE reference count,
so this reenabling on every resume will cause reference count to overflow.
So first disable and reenable ACPI GPE bit using acpi_disable_gpe().
Fixes: 2e23a70eda ("HID: intel-ish-hid: ipc: finish power flow for EHL OOB")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://lore.kernel.org/lkml/CAAd53p4=oLYiH2YbVSmrPNj1zpMcfp=Wxbasb5vhMXOWCArLCg@mail.gmail.com/T/
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
During warm reset device->fw_client is set to NULL. If a bus driver is
registered after this NULL setting and before new firmware clients are
enumerated by ISHTP, kernel panic will result in the function
ishtp_cl_bus_match(). This is because of reference to
device->fw_client->props.protocol_name.
ISH firmware after getting successfully loaded, sends a warm reset
notification to remove all clients from the bus and sets
device->fw_client to NULL. Until kernel v5.15, all enabled ISHTP kernel
module drivers were loaded right after any of the first ISHTP device was
registered, regardless of whether it was a matched or an unmatched
device. This resulted in all drivers getting registered much before the
warm reset notification from ISH.
Starting kernel v5.16, this issue got exposed after the change was
introduced to load only bus drivers for the respective matching devices.
In this scenario, cros_ec_ishtp device and cros_ec_ishtp driver are
registered after the warm reset device fw_client NULL setting.
cros_ec_ishtp driver_register() triggers the callback to
ishtp_cl_bus_match() to match ISHTP driver to the device and causes kernel
panic in guid_equal() when dereferencing fw_client NULL pointer to get
protocol_name.
Fixes: f155dfeaa4 ("platform/x86: isthp_eclite: only load for matching devices")
Fixes: facfe0a4fd ("platform/chrome: chros_ec_ishtp: only load for matching devices")
Fixes: 0d0cccc0fd ("HID: intel-ish-hid: hid-client: only load for matching devices")
Fixes: 44e2a58cb8 ("HID: intel-ish-hid: fw-loader: only load for matching devices")
Cc: <stable@vger.kernel.org> # 5.16+
Signed-off-by: Tanu Malhotra <tanu.malhotra@intel.com>
Tested-by: Shaunak Saha <shaunak.saha@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Benjamin Tissoires:
- fix potential out of bound write of zeroes in HID core with a
specially crafted uhid device (Lee Jones)
- fix potential use-after-free in work function in intel-ish-hid (Reka
Norman)
- selftests config fixes (Benjamin Tissoires)
- few device small fixes and support
* tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
selftest: hid: fix hid_bpf not set in config
HID: uhid: Over-ride the default maximum data buffer value with our own
HID: core: Provide new max_buffer_size attribute to over-ride the default
When a reset notify IPC message is received, the ISR schedules a work
function and passes the ISHTP device to it via a global pointer
ishtp_dev. If ish_probe() fails, the devm-managed device resources
including ishtp_dev are freed, but the work is not cancelled, causing a
use-after-free when the work function tries to access ishtp_dev. Use
devm_work_autocancel() instead, so that the work is automatically
cancelled if probe fails.
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
