Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
Correct the parameter name in the comment of get_max_segment_size()
to fix following warning:-
block/blk-merge.c:220: warning: Function parameter or struct member 'len' not described in 'get_max_segment_size'
block/blk-merge.c:220: warning: Excess function parameter 'max_len' description in 'get_max_segment_size'
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240709045432.8688-1-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some drivers validate that their own logical block size. It is no harm to
always do this, so validate in blk_validate_limits().
This allows us to remove the validation in most of those drivers.
Add a comment to blk_validate_block_size() to inform users that self-
validation of LBS is usually unnecessary.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240708091651.177447-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zeroout can access a significant capacity and take longer than the user
expected. A user may change their mind about wanting to run that
command and attempt to kill the process and do something else with their
device. But since the task is uninterruptable, they have to wait for it
to finish, which could be many hours.
Add a new BLKDEV_ZERO_KILLABLE flag for blkdev_issue_zeroout that checks
for a fatal signal at each iteration so the user doesn't have to wait for
their regretted operation to complete naturally.
Heavily based on an earlier patch from Keith Busch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240701165219.1571322-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only fall back from hardware Write Zeroes failures when
blkdev_issue_write_zeroes returns -EOPNOTSUPP;
Note that blkdev_issue_write_zeroes turns any failure into -EOPNOTSUPP
when the write zeroes queue limit has been cleared to 0, so this still
catches all I/O errors where the driver detected missing support
for the hardware acceleration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240701165219.1571322-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently __bio_integrity_endio frees the integrity payload unless it is
explicitly marked as user-mapped. This means in-kernel callers that
allocate their own integrity payload never get to see it on I/O
completion. The current two users don't need it as they just pre-mapped
PI tuples received over the network, but this limits uses of integrity
data lot.
Change bio_integrity_endio to call __bio_integrity_endio for block layer
generated integrity data only, and leave freeing of submitter
allocated integrity data to bio_uninit which also gets called from
the final bio_put. This requires that unmapping user mapped or copied
integrity data is now always done by the caller, and the special
BIP_INTEGRITY_USER flag can go away.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240702151047.1746127-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit b222dd2fdd ("block: call bio_uninit in bio_endio") added a call
to bio_uninit in bio_endio to work around callers that use bio_init but
fail to call bio_uninit after they are done to release the resources.
While this is an abuse of the bio_init API we still have quite a few of
those left. But this early uninit causes a problem for integrity data,
as at least some users need the bio_integrity_payload. Right now the
only one is the NVMe passthrough which archives this by adding a special
case to skip the freeing if the BIP_INTEGRITY_USER flag is set.
Sort this out by only putting bi_blkg in bio_endio as that is the cause
of the actual leaks - the few users of the crypto context and integrity
data all properly call bio_uninit, usually through bio_put for
dynamically allocated bios.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240702151047.1746127-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull in v6.10-rc6 to resolve a conflict for the integrity cleanups.
* tag 'v6.10-rc6': (778 commits)
Linux 6.10-rc6
ata: ahci: Clean up sysfs file on error
ata: libata-core: Fix double free on error
ata,scsi: libata-core: Do not leak memory for ata_port struct members
ata: libata-core: Fix null pointer dereference on error
x86-32: fix cmpxchg8b_emu build error with clang
x86: stop playing stack games in profile_pc()
i2c: testunit: discard write requests while old command is running
i2c: testunit: don't erase registers after STOP
tty: mxser: Remove __counted_by from mxser_board.ports[]
randomize_kstack: Remove non-functional per-arch entropy filtering
string: kunit: add missing MODULE_DESCRIPTION() macros
ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
MAINTAINERS: Update IOMMU tree location
tools/power turbostat: Add local build_bug.h header for snapshot target
tools/power turbostat: Fix unc freq columns not showing with '-q' or '-l'
tools/power turbostat: option '-n' is ambiguous
drm/drm_file: Fix pid refcounting race
kallsyms: rework symbol lookup return codes
gpiolib: cdev: Ignore reconfiguration without direction
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current tag reservation code is based on a misunderstanding of the
meaning of data->shallow_depth. Fix the tag reservation code as follows:
* By default, do not reserve any tags for synchronous requests because
for certain use cases reserving tags reduces performance. See also
Harshit Mogalapalli, [bug-report] Performance regression with fio
sequential-write on a multipath setup, 2024-03-07
(https://lore.kernel.org/linux-block/5ce2ae5d-61e2-4ede-ad55-551112602401@oracle.com/)
* Reduce min_shallow_depth to one because min_shallow_depth must be less
than or equal any shallow_depth value.
* Scale dd->async_depth from the range [1, nr_requests] to [1,
bits_per_sbitmap_word].
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Zhiguo Niu <zhiguo.niu@unisoc.com>
Fixes: 07757588e5 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240509170149.7639-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we avoid throttling swap writes by determining whether the current
process is kswapd (aka current_is_kswapd()), but swap writes can come
from either kswapd or direct reclaim, so the swap writes from direct
reclaim will still be throttled.
When a process holds a lock to allocate a free page, and enters direct
reclaim because there is no free memory, then it might trigger a hung
due to the wbt throttling that causes other processes to fail to get
the lock.
Both kswapd and direct reclaim set the REQ_SWAP flag, so use REQ_SWAP
instead of current_is_kswapd() to avoid throttling swap writes. Also
renamed WBT_KSWAPD to WBT_SWAP and WBT_RWQ_KSWAPD to WBT_RWQ_SWAP.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240604030522.3686177-1-libaokun@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
User will configure allowed iops limit in 1s, and calculate_io_allowed()
will calculate allowed iops in the slice by:
limit * HZ / throtl_slice
However, if limit is quite low, the result can be 0, then
allowed IO in the slice is 0, this will cause missing dispatch and
control will be lower than limit.
For example, set iops_limit to 5 with HD disk, and test will found that
iops will be 3.
This is usually not a big deal, because user will unlikely to configure
such low iops limit, however, this is still a problem in the extreme
scene.
Fix the problem by making sure the wait time calculated by
tg_within_iops_limit() should allow at least one IO to be dispatched.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240618062108.3680835-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IO logical block size is one fundamental queue limit, and every IO has
to be aligned with logical block size because our bio split can't deal
with unaligned bio.
The check has to be done with queue usage counter grabbed because device
reconfiguration may change logical block size, and we can prevent the
reconfiguration from happening by holding queue usage counter.
logical_block_size stays in the 1st cache line of queue_limits, and this
cache line is always fetched in fast path via bio_may_exceed_limits(),
so IO perf won't be affected by this check.
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240620030631.3114026-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dma_pad_mask is a queue_limits by all ways of looking at it, so move it
there and set it through the atomic queue limits APIs.
Add a little helper that takes the alignment and pad into account to
simplify the code that is touched a bit.
Note that there never was any need for the > check in
blk_queue_update_dma_pad, this probably was just copy and paste from
dma_update_dma_alignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need for bdev_nr_zones() to be an exported function
calculating the number of zones of a block device. Instead, given that
all callers use this helper with a fully initialized block device that
has a gendisk, we can redefine this function as an inline helper in
blkdev.h.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240621031506.759397-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support atomic writes by submitting a single BIO with the REQ_ATOMIC set.
It must be ensured that the atomic write adheres to its rules, like
naturally aligned offset, so call blkdev_dio_invalid() ->
blkdev_atomic_write_valid() [with renaming blkdev_dio_unaligned() to
blkdev_dio_invalid()] for this purpose. The BIO submission path currently
checks for atomic writes which are too large, so no need to check here.
In blkdev_direct_IO(), if the nr_pages exceeds BIO_MAX_VECS, then we cannot
produce a single BIO, so error in this case.
Finally set FMODE_CAN_ATOMIC_WRITE when the bdev can support atomic writes
and the associated file flag is for O_DIRECT.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-8-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add atomic write support, as follows:
- add helper functions to get request_queue atomic write limits
- report request_queue atomic write support limits to sysfs and update Doc
- support to safely merge atomic writes
- deal with splitting atomic writes
- misc helper functions
- add a per-request atomic write flag
New request_queue limits are added, as follows:
- atomic_write_hw_max is set by the block driver and is the maximum length
of an atomic write which the device may support. It is not
necessarily a power-of-2.
- atomic_write_max_sectors is derived from atomic_write_hw_max_sectors and
max_hw_sectors. It is always a power-of-2. Atomic writes may be merged,
and atomic_write_max_sectors would be the limit on a merged atomic write
request size. This value is not capped at max_sectors, as the value in
max_sectors can be controlled from userspace, and it would only cause
trouble if userspace could limit atomic_write_unit_max_bytes and the
other atomic write limits.
- atomic_write_hw_unit_{min,max} are set by the block driver and are the
min/max length of an atomic write unit which the device may support. They
both must be a power-of-2. Typically atomic_write_hw_unit_max will hold
the same value as atomic_write_hw_max.
- atomic_write_unit_{min,max} are derived from
atomic_write_hw_unit_{min,max}, max_hw_sectors, and block core limits.
Both min and max values must be a power-of-2.
- atomic_write_hw_boundary is set by the block driver. If non-zero, it
indicates an LBA space boundary at which an atomic write straddles no
longer is atomically executed by the disk. The value must be a
power-of-2. Note that it would be acceptable to enforce a rule that
atomic_write_hw_boundary_sectors is a multiple of
atomic_write_hw_unit_max, but the resultant code would be more
complicated.
All atomic writes limits are by default set 0 to indicate no atomic write
support. Even though it is assumed by Linux that a logical block can always
be atomically written, we ignore this as it is not of particular interest.
Stacked devices are just not supported either for now.
An atomic write must always be submitted to the block driver as part of a
single request. As such, only a single BIO must be submitted to the block
layer for an atomic write. When a single atomic write BIO is submitted, it
cannot be split. As such, atomic_write_unit_{max, min}_bytes are limited
by the maximum guaranteed BIO size which will not be required to be split.
This max size is calculated by request_queue max segments and the number
of bvecs a BIO can fit, BIO_MAX_VECS. Currently we rely on userspace
issuing a write with iovcnt=1 for pwritev2() - as such, we can rely on each
segment containing PAGE_SIZE of data, apart from the first+last, which each
can fit logical block size of data. The first+last will be LBS
length/aligned as we rely on direct IO alignment rules also.
New sysfs files are added to report the following atomic write limits:
- atomic_write_unit_max_bytes - same as atomic_write_unit_max_sectors in
bytes
- atomic_write_unit_min_bytes - same as atomic_write_unit_min_sectors in
bytes
- atomic_write_boundary_bytes - same as atomic_write_hw_boundary_sectors in
bytes
- atomic_write_max_bytes - same as atomic_write_max_sectors in bytes
Atomic writes may only be merged with other atomic writes and only under
the following conditions:
- total resultant request length <= atomic_write_max_bytes
- the merged write does not straddle a boundary
Helper function bdev_can_atomic_write() is added to indicate whether
atomic writes may be issued to a bdev. If a bdev is a partition, the
partition start must be aligned with both atomic_write_unit_min_sectors
and atomic_write_hw_boundary_sectors.
FSes will rely on the block layer to validate that an atomic write BIO
submitted will be of valid size, so add blk_validate_atomic_write_op_size()
for this purpose. Userspace expects an atomic write which is of invalid
size to be rejected with -EINVAL, so add BLK_STS_INVAL for this. Also use
BLK_STS_INVAL for when a BIO needs to be split, as this should mean an
invalid size BIO.
Flag REQ_ATOMIC is used for indicating an atomic write.
Co-developed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
