Commit 654102df2a ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB to use the generic rule.
To keep consistency across architectures, this commit also renames
CONFIG_ARC_BUILTIN_DTB_NAME to CONFIG_BUILTIN_DTB_NAME.
Now, "nsim_700" is the default value for CONFIG_BUILTIN_DTB_NAME, rather
than a fallback in case it is empty.
Acked-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last, which is beneficial
to cultivate a high-quality code.[2]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Zhang Kunbo <zhangkunbo@huawei.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20241218074439.3271397-1-zhangkunbo@huawei.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
* for-next/mm:
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64: Kconfig: force ARM64_PAN=y when enabling TTBR0 sw PAN
arm64/kvm: Avoid invalid physical addresses to signal owner updates
arm64/kvm: Configure HYP TCR.PS/DS based on host stage1
arm64/mm: Override PARange for !LPA2 and use it consistently
arm64/mm: Reduce PA space to 48 bits when LPA2 is not enabled
* for-next/misc:
arm64: Remove duplicate included header
arm64/Kconfig: Drop EXECMEM dependency from ARCH_WANTS_EXECMEM_LATE
arm64: asm: Fix typo in pgtable.h
arm64/mm: Ensure adequate HUGE_MAX_HSTATE
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Drop INIT_MM_CONTEXT()
* for-next/cpufeature:
kselftest/arm64: Add 2024 dpISA extensions to hwcap test
KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1
arm64/hwcap: Describe 2024 dpISA extensions to userspace
arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12
arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented
arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ISAR3_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64PFR2_EL1 to DDI0601 2024-09
arm64/sysreg: Get rid of CPACR_ELx SysregFields
arm64/sysreg: Convert *_EL12 accessors to Mapping
arm64/sysreg: Get rid of the TCR2_EL1x SysregFields
arm64/sysreg: Allow a 'Mapping' descriptor for system registers
arm64/cpufeature: Refactor conditional logic in init_cpu_ftr_reg()
arm64: cpufeature: Add HAFT to cpucap_is_possible()
Microchip AT91 SoC updates for v6.14
This update includes:
- support for the SAMA7D65 SoC
- support for automatic mode in the backup unit power switch, eliminating
the need for software intervention when entering low power mode
- a fix to release a device node reference in the failure path of the
SoC driver initialization
* tag 'at91-soc-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: add new SoC sama7d65
ARM: at91: pm: change BU Power Switch to automatic mode
soc: atmel: fix device_node release in atmel_soc_device_init()
Link: https://lore.kernel.org/r/20250107081424.758980-3-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* kvm-arm64/misc-6.14:
: .
: Misc KVM/arm64 changes for 6.14
:
: - Don't expose AArch32 EL0 capability when NV is enabled
:
: - Update documentation to reflect the full gamut of kvm-arm.mode
: behaviours
:
: - Use the hypervisor VA bit width when dumping stacktraces
:
: - Decouple the hypervisor stack size from PAGE_SIZE, at least
: on the surface...
:
: - Make use of str_enabled_disabled() when advertising GICv4.1 support
:
: - Explicitly handle BRBE traps as UNDEFINED
: .
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
Documentation: Update the behaviour of "kvm-arm.mode"
KVM: arm64: nv: Advertise the lack of AArch32 EL0 support
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/nv-resx-fixes-6.14:
: .
: Fixes for NV sysreg accessors. From the cover letter:
:
: "Joey recently reported that some rather basic tests were failing on
: NV, and managed to track it down to critical register fields (such as
: HCR_EL2.E2H) not having their expect value.
:
: Further investigation has outlined a couple of critical issues:
:
: - Evaluating HCR_EL2.E2H must always be done with a sanitising
: accessor, no ifs, no buts. Given that KVM assumes a fixed value for
: this bit, we cannot leave it to the guest to mess with.
:
: - Resetting the sysreg file must result in the RESx bits taking
: effect. Otherwise, we may end-up making the wrong decision (see
: above), and we definitely expose invalid values to the guest. Note
: that because we compute the RESx masks very late in the VM setup, we
: need to apply these masks at that particular point as well.
: [...]"
: .
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/nested.c
* kvm-arm64/coresight-6.14:
: .
: Trace filtering update from James Clark. From the cover letter:
:
: "The guest filtering rules from the Perf session are now honored for both
: nVHE and VHE modes. This is done by either writing to TRFCR_EL12 at the
: start of the Perf session and doing nothing else further, or caching the
: guest value and writing it at guest switch for nVHE. In pKVM, trace is
: now be disabled for both protected and unprotected guests."
: .
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/pkvm-memshare-declutter:
: .
: pKVM memory transition simplifications, courtesy of Quentin Perret.
:
: From the cover letter:
: "Since its early days, pKVM has formalized memory 'transitions' (shares
: and donations) using 'struct pkvm_mem_transition' and bunch of helpers
: to manipulate it. The intention was for all transitions to use this
: machinery to ensure we're checking things consistently. However, as
: development progressed, it became clear that the rigidity of this model
: made it really difficult to use in some use-cases which ended-up
: side-stepping it entirely. That is the case for the
: hyp_{un}pin_shared_mem() and host_{un}share_guest() paths upstream which
: use lower level helpers directly, as well as for several other pKVM
: features that should land upstream in the future (ex: when a guest
: relinquishes a page during ballooning, when annotating a page that is
: being DMA'd to, ...). On top of this, the pkvm_mem_transition machinery
: requires a lot of boilerplate which makes the code hard to read, but
: also adds layers of indirection that no compilers seems to see through,
: hence leading to suboptimal generated code.
:
: Given all the above, this series removes the pkvm_mem_transition
: machinery from mem_protect.c, and converts all its users to use
: __*_{check,set}_page_state_range() low-level helpers directly."
: .
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
KVM: arm64: Add unified helper for reprogramming counters by mask
KVM: arm64: Always check the state from hyp_ack_unshare()
KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/nv-timers:
: .
: Nested Virt support for the EL2 timers. From the initial cover letter:
:
: "Here's another batch of NV-related patches, this time bringing in most
: of the timer support for EL2 as well as nested guests.
:
: The code is pretty convoluted for a bunch of reasons:
:
: - FEAT_NV2 breaks the timer semantics by redirecting HW controls to
: memory, meaning that a guest could setup a timer and never see it
: firing until the next exit
:
: - We go try hard to reflect the timer state in memory, but that's not
: great.
:
: - With FEAT_ECV, we can finally correctly emulate the virtual timer,
: but this emulation is pretty costly
:
: - As a way to make things suck less, we handle timer reads as early as
: possible, and only defer writes to the normal trap handling
:
: - Finally, some implementations are badly broken, and require some
: hand-holding, irrespective of NV support. So we try and reuse the NV
: infrastructure to make them usable. This could be further optimised,
: but I'm running out of patience for this sort of HW.
:
: [...]"
: .
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Document EL2 timer API
KVM: arm64: Work around x1e's CNTVOFF_EL2 bogosity
KVM: arm64: nv: Sanitise CNTHCTL_EL2
KVM: arm64: nv: Propagate CNTHCTL_EL2.EL1NV{P,V}CT bits
KVM: arm64: nv: Add trap routing for CNTHCTL_EL2.EL1{NVPCT,NVVCT,TVT,TVCT}
KVM: arm64: Handle counter access early in non-HYP context
KVM: arm64: nv: Accelerate EL0 counter accesses from hypervisor context
KVM: arm64: nv: Accelerate EL0 timer read accesses when FEAT_ECV in use
KVM: arm64: nv: Use FEAT_ECV to trap access to EL0 timers
KVM: arm64: nv: Publish emulated timer interrupt state in the in-memory state
KVM: arm64: nv: Sync nested timer state with FEAT_NV2
KVM: arm64: nv: Add handling of EL2-specific timer registers
Signed-off-by: Marc Zyngier <maz@kernel.org>
Before pinctrl driver implemented, the uart0 controller reply on
bootloader for setting correct pin mux and configurations.
Now, let's add pinctrl property to uart0 of Bananapi-F3 board.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Qualcomm Arm64 DeviceTree updates for v6.14
This adds support for the new Snapdragon 8 Elite platform with MTP and
QRD boards, QCS615 platform with the Ride board, QCS8300 platform with
its Ride board, IPQ5424 platform with the RDP466 board, MSM8917 platform
with Xiaomi Redmi 5A, and the SAR2130P platform with the Snapdragon AR2
Gen1 Smart Viewer Development Kit.
On X Elite the HP Omnibook X laptop and the Snapdragon Devkit are added.
The 8cx Gen3-based Huawaei Matebook E Go and Microsoft Windows Dev Kit
2023 are introduced.
IPQ9574 gains PCIe and TRNG descriptions, together with a few other
smaller improvements. TRNG is also enabled on the IPQ5332 platform.
On MSM8994, Huawei Nexus 6P gains power and volume keys support. USB
interrupts are corrected.
On QCM6490 the FairPhone 5 gains camera EEPROM and Rb3Gen2 development
kit gains description of the onboard LEDs.
On QRB4210 RB2 support for HDMI audio playback is added.
SA8775P gains missing clock controllers, CPUs are tied to PSCI power
domains, DisplayPort is introduced and enabled on the Ride board.
On SDM670 the GPU components are described and enabled for Google Pixel
3a, together with camera clock controller and flash LED.
Xiaomi Mi Pad 5 Pro, on SM8250, gets WiFi and Bluetooth enabled.
"global" IRQ for PCIe RC controllers are described on SM8550 and SM8650,
to allow for hotplug events.
Coresight support is added for SM8450, SM8650, X 1 Elite, QCS615,
and QCS8300.
The X Elite platform gains QUP power domains and OPPs, another PCIe
controller, another UART, and its SDHCI controllers. The ASUS Vivobook S
15 gets GPU and lid switch enabled. Microsoft Surface Laptop 7 gains
audio configuration, SD card reader support, and USB retimers. The
Lenovo Yoga Slim 7x gets its LID switch described. Dell XPS 13 gains
retimers described. The Lenovo Thinkpad T14s has additional USB ports
enabled, as well as sound and fingerprint sensor.
USB U1/U2 entry is disabled across a variety of platforms, to improve
USB stability.
sleep clock frequencies are reviewed and corrected for a variety of
platforms, so is also various remoteproc mmio address ranges.
* tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (240 commits)
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
arm64: dts: qcom: ipq5424: add scm node
arm64: dts: qcom: sm8250: Fix interrupt types of camss interrupts
arm64: dts: qcom: sdm845: Fix interrupt types of camss interrupts
arm64: dts: qcom: sc8280xp: Fix interrupt type of camss interrupts
arm64: dts: qcom: qcs8300-ride: Enable USB controllers
arm64: dts: qcom: qcs8300: Add support for usb nodes
arm64: dts: qcom: qcs8300: Add support for clock controllers
arm64: dts: qcom: sm8450: Add coresight nodes
arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions
arm64: dts: qcom: qcs615-ride: Enable UFS node
arm64: dts: qcom: qcs615: add UFS node
arm64: dts: qcom: ipq5424: Add USB controller and phy nodes
...
Link: https://lore.kernel.org/r/20250111181025.394631-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm32 DeviceTree updates for v6.14
Describe the interconnect paths for PCIe EP controllers on SDX55 and
SDX65. Disable USB U1/U2 entry to improve USB stability on the same.
* tag 'qcom-arm32-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: sdx55: Disable USB U1/U2 entry
ARM: dts: qcom: sdx65: Disable USB U1/U2 entry
ARM: dts: qcom: sdx55: Add CPU PCIe EP interconnect path
ARM: dts: qcom: sdx65: Add PCIe EP interconnect path
Link: https://lore.kernel.org/r/20250111171126.369502-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards rk3576-evb1, H96 Max V58 TV Box (rk3588), BigTreeTech CB2
(SoM + baseboard) and Pi2 (SBC), Firefly ITX-3588J (Core-3588J SoM),
Orange Pi 5 Max.
A interesting case is the Radxa E52C using a soc called rk3582. This is
rk3588-variant where some cpu cores are disabled during production and
the bootloader needs to read the available cores from efuses and adapt
the DT it hands over to the kernel.
New supported peripherals are just the naneng combophy + the usb
controllers using them on the rk3576 as well as the arm,smmu attached
to the PCI controller on rk3588.
And finally there are of course a number of board-specific enablements
and refinements (MCU on Qnap-TS433, USB3 on NanoPi R6C/R6S and Orange Pi
5+ etc.
* tag 'v6.14-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits)
arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM
dt-bindings: arm: rockchip: Add Firefly ITX-3588J board
arm64: dts: rockchip: Add Orange Pi 5 Max board
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max
arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
arm64: dts: rockchip: add WLAN to rk3588-evb1 controller
arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma
arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes
arm64: dts: rockchip: enable hdmi out audio on wolfvision pf5
arm64: dts: rockchip: fix num-channels property of wolfvision pf5 mic
arm64: dts: rockchip: Enable the USB 3.0 port on NanoPi R6C/R6S
arm64: dts: rockchip: Add FRAM MB85RS128TY to rk3568-mecsbc
arm64: dts: rockchip: Remove unused i2c2 node from rk3568-mecsbc
arm64: dts: rockchip: Fix PCIe3 handling for Edgeble-6TOPS Modules
arm64: dts: rockchip: Add Radxa E52C
dt-bindings: arm: rockchip: Add Radxa E52C
arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2
dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2
arm64: dts: rockchip: Enable USB 3.0 ports on orangepi-5-plus
arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC
...
Link: https://lore.kernel.org/r/2193001.3Lj2Plt8kZ@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: tegra: Device tree fixes for v6.14-rc1
These patches fix up an issue with the DMA support on one of the SPI
controllers, as well as properly identify the SCE fabric and disable
it to prevent accessing registers that may not be accessible to the
CPU. Finally, the GIC's #address-cells property is set to 0 to fix a
problem in the PCIe interrupt-map property.
* tag 'tegra-for-6.14-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Fix Tegra234 PCIe interrupt-map
arm64: tegra: Disable Tegra234 sce-fabric node
arm64: tegra: Fix typo in Tegra234 dce-fabric compatible
arm64: tegra: Fix DMA ID for SPI2
Link: https://lore.kernel.org/r/20250110185355.4143505-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.14:
- Dave adds the display pipeline DT nodes on BCM2712 (Raspberry Pi 5)
- Rob removes some undocumented properties
- Same ensures that the CFE stub area is reserved to allow secondary
CPUs to be successfully brought up in Linux, also making sure that the
address used in the spin table is also carved out. Finally he adds
support for the Zyxel EX3510-B router using BCM4906
- Rosen converts the BCM4908 platforms to use the more flexible
nvmem-layout representation
* tag 'arm-soc/for-6.14/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: bcm4908: nvmem-layout conversion
arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B
dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906
arm64: dts: broadcom: bcmbca: bcm4908: Protect cpu-release-addr
arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
arm64: dts: broadcom: Remove unused and undocumented properties
arm64: dts: broadcom: Add DT for D-step version of BCM2712
arm64: dts: broadcom: Add display pipeline support to BCM2712
arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT
Link: https://lore.kernel.org/r/20250109224756.3632025-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 6.14, please pull the following:
- Rob removes some unused and undocumented properties pertaining to the
SPI flash controller on Broadcom boards
- Linus adds a number of BCM6846 peripherals: HWRNG, watchdog, GPIO,
MDIO, LED controller, DMA and then proceeds with adding support for
the GEnexsis XG6846B PON router
- Rosen sets the MAC address NVMEM reference on the Meraki MR26 platform
* tag 'arm-soc/for-6.14/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: meraki-mr26: set mac address for gmac0
ARM: dts: broadcom: Add Genexis XG6846B DTS file
dt-bindings: arm: bcmbca: Add Genexis XG6846B
dt-bindings: vendor-prefixes: Add Genexis
ARM: dts: bcm6846: Add ARM PL081 DMA block
ARM: dts: bcm6846: Add LED controller
ARM: dts: bcm6846: Add MDIO control block
ARM: dts: bcm6846: Add GPIO blocks
ARM: dts: bcm6846: Enable watchdog
ARM: dts: bcm6846: Add iproc rng
arm: dts: broadcom: Remove unused and undocumented properties
Link: https://lore.kernel.org/r/20250109224756.3632025-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner Device Tree changes for 6.14
- Add support for DMA engine and audio codec on F1C100s
and enable audio codec on Lichee Pi Nano
- Add syscon and SRAM nodes for A100
- Enable CPU DVFS for Tanix TX1
- Explicitly configure TCON0 pixel clock parent according to display
output used
This includes one commit shared with the clock tree
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
which adds the macros for the TCON0 pixel clock parents.
* tag 'sunxi-dt-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: explicitly assign clock parent for TCON0
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
arm64: dts: allwinner: h313: enable DVFS for Tanix TX1
arm64: dts: allwinner: a100: Add syscon nodes
dt-bindings: sram: sunxi-sram: Add A100 compatible
ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano
ARM: dts: suniv: f1c100s: Add support for Audio Codec
ARM: dts: suniv: f1c100s: Add support for DMA
Link: https://lore.kernel.org/r/Z36h2FwUxro8rouO@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MediaTek ARM64 DeviceTree updates for v6.14
This adds a few cleanups, enhances support for upstreamed SoCs
and machines, other than adding new ones.
In particular, fixes and improvements:
- MT8516 gets a few fixes for GICv2, Watchdog and I2C, and
support for the Keypad controller;
- MT8390 Genio 700 board gets basic audio support;
- MT8365 gets an alias for its integrated ethernet controller;
- MT8195 gets an important fix for system suspend: all of the
machines based on this SoC and its IoT variant can now
properly perform PM Suspend to RAM;
- MT8188 gets support for its Mali GPU with DVFS and a fix for
the OVL Hardware found in the Display Controller using the
right compatible strings;
- MT8186 Chromebooks can now suspend properly thanks to a fix
moving the USB wakeups from XHCI to MTU3 (USB) controller;
- MT8183 Chromebooks get a fix for their DMIC microphone and
proper support for their second-source touchscreen;
- MT7988 SoC and the BananaPi R4 board gets support for Pinctrl,
eMMC/SD, Thermal, CPU DVFS, PCI-Express, and peripherals like
the RT5190A PMIC, PCA9545 I2C mux, and others;
- MT7986 BananaPi R3 board gets support for SATA power socket;
And cleanups:
- Dropped regulator-compatible property from MediaTek DTs;
- Aligned thermal node names with bindings on MT8183 Kukui;
- MT6397 PMIC get proper sub-node names, fixing dt validation;
- The property enabling Wake-On-Lan feature changed in all of
the boards and driver to match the actual meaning of it
(mediatek,mac-wol now enables wol on mac instead of phy);
- Compatibles for MediaTek PMIC Keypad are added to bindings
and can now pass dts validation;
...and the newly added machines are:
- MT8188 (Ciri) Lenovo Chromebook Duet
- MT8186 (Starmie) ASUS Chromebook Enterprise CM30
- MT8186 (Chinchou) ASUS Chromebook CZ12 and CZ12 Flip
* tag 'mtk-dts64-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (71 commits)
arm64: dts: mediatek: mt8516: add keypad node
arm64: dts: mediatek: add per-SoC compatibles for keypad nodes
dt-bindings: mediatek,mt6779-keypad: add more compatibles
arm64: dts: mediatek: mt8365-evk: Set ethernet alias
dts: arm64: mediatek: mt8195: Remove MT8183 compatible for OVL
dts: arm64: mediatek: mt8188: Update OVL compatible from MT8183 to MT8195
dt-bindings: display: mediatek: ovl: Modify rules for MT8195/MT8188
dt-bindings: display: mediatek: ovl: Add compatible strings for MT8188 MDP3
dt-bindings: arm: mediatek: Drop MT8192 Chromebook variants that never shipped
arm64: dts: mediatek: mt8192: Drop Chromebook variants that never shipped
arm64: dts: mediatek: mt7988a-bpi-r4: Add proc-supply for cpus
arm64: dts: mediatek: mt7988a-bpi-r4: Add MediaTek MT6682A/RT5190A PMIC
arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie
arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm
arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4
arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1
arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux
arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers
arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout
arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart
...
Link: https://lore.kernel.org/r/20250108100826.32458-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX arm64 device tree change for 6.14:
- Add simple-framebuffer support for imx8mn-bsh-smm-s2/pro board
(Dario Binacchi)
- Add LVDS compatible string for imx8mm-phg board (Fabio Estevam)
- Add P3T1085 temperature sensor support for imx93-9x9-qsb board (Frank Li)
- Add support for i.MX8MP based aristainetos3 boards from ABB
(Heiko Schocher)
- Add PCA9452 system PMIC support for imx93-14x14-evk board (Joy Zou)
- Support NXP LVDS to HDMI adapter cards for imx8mp-evk board with DT
overlays (Liu Ying)
- A couple of changes from Markus Niebel to enable Open Drain for MDIO
on imx93-tqma9352 boards
- A series from Peng Fan to enable wdog3 fsl,ext-reset-output support
for NXP i.MX93 boards
- A couple changes from Wei Fang to add NETC support for i.MX95
* tag 'imx-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx93-9x9-qsb: enable fsl,ext-reset-output for wdog3
arm64: dts: freescale: imx93-14x14-evk: enable fsl,ext-reset-output for wdog3
arm64: dts: freescale: imx93-11x11-evk: enable fsl,ext-reset-output for wdog3
arm64: dts: imx95-19x19-evk: add ENETC 0 support
arm64: dts: imx95: add NETC related nodes
arm64: dts: imx8mm-phg: Add LVDS compatible string
arm64: dts: imx93: add pca9452 support
arm64: dts: imx8mn-bsh-smm-s2/pro: add simple-framebuffer
arm64: dts: imx93-tqma9352-mba93xxla: enable Open Drain for MDIO
arm64: dts: imx93-tqma9352-mba93xxca: enable Open Drain for MDIO
arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085
arm64: dts: imx8mp-evk: Add NXP LVDS to HDMI adapter cards
arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Set "media_disp2_pix" clock rate to 70MHz
arm64: dts: imx8mp: add aristainetos3 board support
arm64: dts: imx8mq-zii-ultra: remove #address-cells of eeprom@a4
arm64: dts: imx: Switch to simple-audio-card,hp-det-gpios
Link: https://lore.kernel.org/r/20250105095139.714590-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SoCFPGA DTS updates for v6.14
- Remove unused and undocumented property "snps,max-mtu"
- Add gpio and spi node for Agilex5
- Add VGIC maintenance interrupt for Agilex
- Use correct reset name of "stmmaceth-ocp" instead of "ahb"
- Drop unused #address-cells/#size-cells in the cyclone5-mcvevk
* tag 'socfpga_dts_updates_v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: altera: Remove unused and undocumented "snps,max-mtu" property
arm64: dts: socfpga: agilex5: Add gpio0 node and spi dma handshake id
arm64: dts: socfpga: agilex: Add VGIC maintenance interrupt
arm: dts: socfpga: use reset-name "stmmaceth-ocp" instead of "ahb"
ARM: dts: socfpga_cyclone5_mcvevk: Drop unused #address-cells/#size-cells
Link: https://lore.kernel.org/r/20250103023012.1268627-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Minor improvements in ARM DTS for v6.14
1. Marvell: Use un-deprecated hp-det-gpios (no ABI impact expected).
2. SoCFPGA: Drop spidev devices which are not properly described in DTS,
but are using some other compatibles. This was part of wider tree
effort to fix such incorrect hardware descriptions.
Important: Dropping this device node will have user-visible impact:
spidev device will not register.
* tag 'dt-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: socfpga: remove non-existent DAC from CycloneV devkit
ARM: dts: marvell: mmp2-olpc-xo-1-75: Switch to {hp,mic}-det-gpios
Link: https://lore.kernel.org/r/20241231132847.135814-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
