Nohz full CPUs are not a desirable fallback target to run 32bits el0
applications. If present, prefer a set of housekeeping CPUs that can do
the job instead. Otherwise just don't support el0 32 bits. Should the
need arise, appropriate support can be introduced in the future.
Suggested-by: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Including m68k's <asm/raw_io.h> in vga.h on nommu platforms results
in conflicting defines with io_no.h for various I/O macros from the
__raw_read and __raw_write families. An example error is
In file included from arch/m68k/include/asm/vga.h:12,
from include/video/vga.h:22,
from include/linux/vgaarb.h:34,
from drivers/video/aperture.c:12:
>> arch/m68k/include/asm/raw_io.h:39: warning: "__raw_readb" redefined
39 | #define __raw_readb in_8
|
In file included from arch/m68k/include/asm/io.h:6,
from include/linux/io.h:13,
from include/linux/irq.h:20,
from include/asm-generic/hardirq.h:17,
from ./arch/m68k/include/generated/asm/hardirq.h:1,
from include/linux/hardirq.h:11,
from include/linux/interrupt.h:11,
from include/linux/trace_recursion.h:5,
from include/linux/ftrace.h:10,
from include/linux/kprobes.h:28,
from include/linux/kgdb.h:19,
from include/linux/fb.h:6,
from drivers/video/aperture.c:5:
arch/m68k/include/asm/io_no.h:16: note: this is the location of the previous definition
16 | #define __raw_readb(addr) \
|
Include <asm/io.h>, which avoids raw_io.h on nommu platforms.
Also change the defined values of some of the read/write symbols in
vga.h to __raw_read/__raw_write as the raw_in/raw_out symbols are not
generally available.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501071629.DNEswlm8-lkp@intel.com/
Fixes: 5c3f968712 ("m68k/video: Create <asm/vga.h>")
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v3.5+
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20250107095912.130530-1-tzimmermann@suse.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Similar to the TI K3-AM62x SoC commit ce27f7f9e3
("arm64: dts: ti: k3-am62-wakeup: Configure ti-sysc for wkup_uart0"),
The devices in the wkup domain are capable of waking up the system from
suspend. We can configure the wkup domain devices in a generic way using
the ti-sysc interconnect target module driver like we have done with the
earlier TI SoCs.
As ti-sysc manages the SYSCONFIG related registers independent of the
child hardware device, the wake-up configuration is also set even if
wkup_uart0 is reserved by sysfw.
The wkup_uart0 device has interconnect target module register mapping like
dra7 wkup uart. There is a 1 MB interconnect target range with one uart IP
block in the target module. The power domain and clock affects the whole
interconnect target module.
Note we change the functional clock name to follow the ti-sysc binding
and use "fck" instead of "fclk".
Also note that we need to disable the target module reset as noted by
Markus. Otherwise the sysfw using wkup_uart0 can get confused on some
devices leading to boot time issues such as mbox timeouts.
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
[d-gole@ti.com: Reworded the entire commit message]
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241231-am62a-dt-ti-sysc-wkup-v1-1-a9b0d18a2649@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
AM69 SK board has two stacked USB3 connectors:
1. USB3 (Stacked TypeA + TypeC)
2. USB3 TypeA Hub interfaced through TUSB8041.
The board uses SERDES0 Lane 3 for USB3 IP. So update the
SerDes lane info for PCIe and USB. Add the pin mux data
and enable USB 3.0 support with its respective SERDES settings.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Enric Balletbo i Serra <eballetb@redhat.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250108-am69sk-dt-usb-v3-1-bb4981534754@redhat.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The reset deassert time for the DP83TD510E is incorrectly set to
60000us, while the datasheet states that the minimum time required
after an hard reset is 30us (while 60ms is the time required for the
Power-On Reset after supply stabilization). The error probably arose
from the two timings being indicated by the same symbol (T2).
Lower the required time to 35us, aligning it to the value required for
the PHY to complete the reset AND to be able to accept the RMII master
clock. This saves ~60ms on boot if the MDIO driver is built-in.
Signed-off-by: Francesco Valla <francesco@valla.it>
Link: https://lore.kernel.org/r/20250105162630.243899-1-francesco@valla.it
Signed-off-by: Nishanth Menon <nm@ti.com>
SolidRun HummingBoard-T has two options for M.2 connector, supporting
either PCI-E or USB-3.1 Gen 1 - depending on configuration of a mux
on the serdes lane.
The required configurations in device-tree were modeled as overlays.
The USB-3.1 overlay uses /delete-property/ to unset a boolean property
on the usb controller limiting it to USB-2.0 by default.
Overlays can not delete a property from the base dtb, therefore this
overlay is at this time useless.
Convert both overlays into full dts by including the base board dts.
While the pcie overlay was functional, both are converted for a
consistent user experience when selecting between the two mutually
exclusive configurations.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/linux-devicetree/CAMuHMdXTgpTnJ9U7egC2XjFXXNZ5uiY1O+WxNd6LPJW5Rs5KTw@mail.gmail.com
Fixes: bbef42084c ("arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20250101-am64-hb-fix-overlay-v2-1-78143f5da28c@solid-run.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add overlay to enable the PCIE1 instance of PCIe on AM68-SK-Base-Board in
Endpoint mode of operation. PCIE1 on AM68-SK-Base-Board supports x2 Lane
operation unlike its counterpart on J721S2-EVM which supports x1 Lane.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20241205105041.749576-4-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add overlay to enable the PCIE1 instance of PCIe on J721E-EVM in Endpoint
mode of operation. Additionally, in order to support both PCIE0 and PCIE1
in Endpoint Mode of operation, enable applying device-tree overlays on
"k3-j721e-evm-pcie0-ep.dtb", thereby allowing the overlay for PCIE1 in
Endpoint mode to be applied on the aforementioned DTB.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20241205105041.749576-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The list of "dtbs" should contain the resultant "dtb" formed by applying
the "dtbo" overlay on the base "dtb", rather than the "dtbo" itself.
Hence, change "k3-j7200-evm-pcie1-ep.dtbo" to "k3-j7200-evm-pcie1-ep.dtb"
in the list of "dtbs".
Fixes: f43ec89bbc ("arm64: dts: ti: k3-j7200-evm: Add overlay for PCIE1 Endpoint Mode")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20241205105041.749576-2-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TSM module provides guest identification and attestation when a
guest runs in CCA realm mode. By creating a dummy platform device,
let's ensure the module is automatically loaded. The udev daemon loads
the TSM module after it receives a device addition event. Once that
happens, it can be used earlier in the boot process to decrypt the
rootfs.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241220181236.172060-2-jeremy.linton@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The hwcaps code that exposes SVE features to userspace only
considers ID_AA64ZFR0_EL1, while this is only valid when
ID_AA64PFR0_EL1.SVE advertises that SVE is actually supported.
The expectations are that when ID_AA64PFR0_EL1.SVE is 0, the
ID_AA64ZFR0_EL1 register is also 0. So far, so good.
Things become a bit more interesting if the HW implements SME.
In this case, a few ID_AA64ZFR0_EL1 fields indicate *SME*
features. And these fields overlap with their SVE interpretations.
But the architecture says that the SME and SVE feature sets must
match, so we're still hunky-dory.
This goes wrong if the HW implements SME, but not SVE. In this
case, we end-up advertising some SVE features to userspace, even
if the HW has none. That's because we never consider whether SVE
is actually implemented. Oh well.
Fix it by restricting all SVE capabilities to ID_AA64PFR0_EL1.SVE
being non-zero. The HWCAPS documentation is amended to reflect the
actually checks performed by the kernel.
Fixes: 06a916feca ("arm64: Expose SVE2 features for userspace")
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250107-arm64-2024-dpisa-v5-1-7578da51fc3d@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The Edgeble 6TOPS modules has configured the PCIe3.0 with
- 2 lanes on Port1 of pcie3x2 controller for M.2 M-Key
- 2 lanes on Port0 of pcie3x4 controller for B and E-Key
The, current DT uses opposite controller nodes that indeed uses
incorrect reset, regulator nodes.
The configuration also uses refclk oscillator that need to enable
explicitly in DT to avoid the probe hang on while reading DBI.
So, this patch fixes all these essential issues and make this PCIe work
properly.
Issues fixed are,
- Fix the associate controller nodes for M and B, E-Key
- Fix the reset gpio handlings
- Fix the regulator handlings and naming convensions
- Support pcie_refclk oscillator
Fixes: 92eaee21ab ("arm64: dts: rockchip: Add Edgeble NCM6A-IO M.2 B-Key, E-Key")
Fixes: 5d85d4c7e0 ("arm64: dts: rockchip: Add Edgeble NCM6A-IO M.2 M-Key")
Reported-by: Mitchell Ma <machuang@radxa.com>
Co-developed-by: Mitchell Ma <machuang@radxa.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20241221151758.345257-1-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The hypervisor VA space size depends on both the ID map's
(IDMAP_VA_BITS) and the kernel stage-1 (VA_BITS). However, the
hypervisor stacktrace decoding is solely relying on VA_BITS. This is
especially an issue when VA_BITS < IDMAP_VA_BITS (i.e. VA_BITS is
39-bit): the hypervisor may have addresses bigger than the stacktrace is
masking.
Align this mask with hyp_va_bits.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250107112821.416591-1-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The Orange Pi 5 Plus has its first USB 3.0 interface on the SoC wired
directly to the USB type C port next to the MASKROM button, and the
second interface wired to a USB 3.0 hub which in turn is connected to
the USB 3.0 host ports on the board, as well as the USB 2.0 connection
on the M.2 E-key slot.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20241220161240.109253-1-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
H96 Max V58 is a compact Rockchip RK3588 based device that ships
with Android and is meant for use as a TV connected media box.
Its hardware includes:
- Rockchip RK3588 SoC with a small aluminium heatsink
- 4GB or 8GB LPDDR4 RAM
- 32GB or 64GB eMMC 5.1 storage (HS400)
- Onboard AP6275P wireless module providing 802.11ax 2x2 MIMO WiFi
over PCIe connection and Bluetooth 5.3 over UART with two external
detachable antennas
- 1x GbE using the onboard GMAC and an RTL8211F PHY
- 1x USB 2.0 Type-A (also serves as the Maskrom port)
- 1x USB 3.0 Type-A
- 1x HDMI 2.1 output
- 1x optical SPDIF output
- LED line display ("88:88" digits plus icons) driven by an FD6551
IC connected over bitbanged I2C (not yet enabled here)
- GPIO connected CIR receiver
- Single Rockchip RK806-1 PMIC
- 12x onboard ambient LEDs lighting up the bottom of the device
- 5v DCIN using a standard round 5.5mm connector
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250108-rk3588-h96-max-v58-v2-3-522301b905d6@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There are more than one SMN index/data pair available for software use.
The register offsets are different, but the protocol is the same.
Use defines for the SMN offset values and allow the index/data offsets
to be passed to the read/write helper function.
This eases code reuse with other SMN users in the kernel.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-14-yazen.ghannam@amd.com
Currently, the total AMD node count is determined by searching and counting
CPU/node devices using PCI IDs.
However, AMD node information is already available through topology
CPUID/MSRs. The recent topology rework has made this info easier to access.
Replace the node counting code with a simple product of topology info.
Every node/northbridge is expected to have a 'misc' device. Clear everything
out if a 'misc' device isn't found on a node.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250107222847.3300430-7-yazen.ghannam@amd.com
The "root" device search was introduced to support SMN access for Zen
systems. This device represents a PCIe root complex. It is not the
same as the "CPU/node" devices found at slots 0x18-0x1F.
There may be multiple PCIe root complexes within an AMD node. Such is
the case with server or High-end Desktop (HEDT) systems, etc. Therefore
it is not enough to assume "root <-> AMD node" is a 1-to-1 association.
Currently, this is handled by skipping "extra" root complexes during the
search. However, the hardware provides the PCI bus number of an AMD
node's root device.
Use the hardware info to get the root device's bus and drop the extra
search code and PCI IDs.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-7-yazen.ghannam@amd.com
Use the newly added helper function to look up a CPU/Node function to
find "function 4" devices.
Thus, avoid the need to regularly add new PCI IDs for basic discovery.
The unique PCI IDs are still useful in case of quirks or functional
changes. And they should be used only in such a manner.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-6-yazen.ghannam@amd.com
The "AMD Node" concept spans many families of systems and applies to
a number of subsystems and drivers.
Currently, the AMD Northbridge code is overloaded with AMD node
functionality. However, the node concept is broader than just
northbridges.
Start files to host common AMD node functions and definitions. Include
a helper to find an AMD node device function based on the convention
described in AMD documentation.
Anything that needs node functionality should include this rather than
amd_nb.h. The AMD_NB code will be reduced to only northbridge-specific
code needed for legacy systems.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241206161210.163701-5-yazen.ghannam@amd.com
Commit facbe7092f ("arm64: dts: marvell: Drop undocumented SATA phy names")
drops some phy-names from devicetrees but misses some. Drop them too.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The ahci-platform binding requires phys/target-supply property.
After converting the binding to yaml the following files
reporting "'anyOf' conditional failed" on
sata@540000: sata-port@0
armada-7040-db.dts
armada-8040-clearfog-gt-8k.dts
armada-8040-mcbin.dts
armada-8040-mcbin-singleshot.dts
cn9130-db.dts
cn9130-db-B.dts
cn9131-db.dts
cn9131-db-B.dts
cn9132-db.dts
cn9132-db-B.dts
the following files reporting 'anyOf' conditional failed on
sata@540000: sata-port@1
cn9132-db.dts
cn9132-db-B.dts
cn9130-crb-B.dts
'phys' is a required property
'target-supply' is a required property
>From schema: Documentation/devicetree/bindings/ata/ahci-platform.yaml
This is caused by defining sata-ports incomplete in armada-cp11x.dtsi
and overriding only a subset of ports with the needed
phys/target-supply property.
Fix this by disabling the node-templates and enabling the needed nodes.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
