The documentation currently says:
config_acs=
Format:
<ACS flags>@<pci_dev>[; ...]
Specify one or more PCI devices (in the format
specified above) optionally prepended with flags
and separated by semicolons. The respective
capabilities will be enabled, disabled or
unchanged based on what is specified in
flags.
(...)
For example,
pci=config_acs=10x
would configure all devices that support
ACS to enable P2P Request Redirect, disable
Translation Blocking, and leave Source
Validation unchanged from whatever power-up
or firmware set it to.
See the complete documentation at:
https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html
However, a flag specification always needs to be suffixed with "@" and
a PCI valid device address, which is missing in this example. Also, to
configure all devices that support ACS, the flag needs to be suffixed
with "@pci:0:0", for the ACS support to be enabled.
Fix the documentation so the example is correct.
Link: https://lore.kernel.org/r/20240915-acs-v1-1-b9ee536ee9bd@daynix.com
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Pull ftrace updates from Steven Rostedt:
- Have fprobes built on top of function graph infrastructure
The fprobe logic is an optimized kprobe that uses ftrace to attach to
functions when a probe is needed at the start or end of the function.
The fprobe and kretprobe logic implements a similar method as the
function graph tracer to trace the end of the function. That is to
hijack the return address and jump to a trampoline to do the trace
when the function exits. To do this, a shadow stack needs to be
created to store the original return address. Fprobes and function
graph do this slightly differently. Fprobes (and kretprobes) has
slots per callsite that are reserved to save the return address. This
is fine when just a few points are traced. But users of fprobes, such
as BPF programs, are starting to add many more locations, and this
method does not scale.
The function graph tracer was created to trace all functions in the
kernel. In order to do this, when function graph tracing is started,
every task gets its own shadow stack to hold the return address that
is going to be traced. The function graph tracer has been updated to
allow multiple users to use its infrastructure. Now have fprobes be
one of those users. This will also allow for the fprobe and kretprobe
methods to trace the return address to become obsolete. With new
technologies like CFI that need to know about these methods of
hijacking the return address, going toward a solution that has only
one method of doing this will make the kernel less complex.
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Remove disabling of interrupts in the function graph tracer
When function graph tracer was first introduced, it could race with
interrupts and NMIs. To prevent that race, it would disable
interrupts and not trace NMIs. But the code has changed to allow NMIs
and also interrupts. This change was done a long time ago, but the
disabling of interrupts was never removed. Remove the disabling of
interrupts in the function graph tracer is it is not needed. This
greatly improves its performance.
- Allow the :mod: command to enable tracing module functions on the
kernel command line.
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Because enabling function tracing can be done very early at boot up
(before scheduling is enabled), the commands that can be done when
function tracing is started is limited. Having the ":mod:" command to
trace module functions as they are loaded is very useful. Update the
kernel command line function filtering to allow it.
* tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
ftrace: Implement :mod: cache filtering on kernel command line
tracing: Adopt __free() and guard() for trace_fprobe.c
bpf: Use ftrace_get_symaddr() for kprobe_multi probes
ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr
Documentation: probes: Update fprobe on function-graph tracer
selftests/ftrace: Add a test case for repeating register/unregister fprobe
selftests: ftrace: Remove obsolate maxactive syntax check
tracing/fprobe: Remove nr_maxactive from fprobe
fprobe: Add fprobe_header encoding feature
fprobe: Rewrite fprobe on function-graph tracer
s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC
ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC
bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled
tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS
tracing: Add ftrace_fill_perf_regs() for perf event
tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs
fprobe: Use ftrace_regs in fprobe exit handler
fprobe: Use ftrace_regs in fprobe entry handler
fgraph: Pass ftrace_regs to retfunc
fgraph: Replace fgraph_ret_regs with ftrace_regs
...
Pull RCU updates from Uladzislau Rezki:
"Misc fixes:
- check if IRQs are disabled in rcu_exp_need_qs()
- instrument KCSAN exclusive-writer assertions
- add extra WARN_ON_ONCE() check
- set the cpu_no_qs.b.exp under lock
- warn if callback enqueued on offline CPU
Torture-test updates:
- add rcutorture.preempt_duration kernel module parameter
- make the TREE03 scenario do preemption
- improve pooling timeouts for rcu_torture_writer()
- improve output of "Failure/close-call rcutorture reader segments"
- add some reader-state debugging checks
- update doc of polled APIs
- add extra diagnostics for per-reader-segment preemption
- add an extra test for sched_clock()
- improve testing on unresponsive systems
SRCU updates:
- improve doc for srcu_read_lock() in terms of return value
- fix typo in comments
- remove redundant GP sequence checks in the srcu_funnel_gp_start"
* tag 'rcu.release.v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (31 commits)
srcu: Remove redundant GP sequence checks in srcu_funnel_gp_start
srcu: Fix typo s/srcu_check_read_flavor()/__srcu_check_read_flavor()/
srcu: Guarantee non-negative return value from srcu_read_lock()
MAINTAINERS: Update RCU git tree
rcu: Add lockdep_assert_irqs_disabled() to rcu_exp_need_qs()
rcu: Add KCSAN exclusive-writer assertions for rdp->cpu_no_qs.b.exp
rcu: Make preemptible rcu_exp_handler() check idempotency
rcu: Replace open-coded rcu_exp_need_qs() from rcu_exp_handler() with call
rcu: Move rcu_report_exp_rdp() setting of ->cpu_no_qs.b.exp under lock
rcu: Make rcu_report_exp_cpu_mult() caller acquire lock
rcu: Report callbacks enqueued on offline CPU blind spot
rcutorture: Use symbols for SRCU reader flavors
rcutorture: Add per-reader-segment preemption diagnostics
rcutorture: Read CPU ID for decoration protected by both reader types
rcutorture: Add preempt_count() to rcutorture_one_extend_check() diagnostics
rcutorture: Add parameters to control polled/conditional wait interval
rcutorture: Add documentation for recent conditional and polled APIs
rcutorture: Ignore attempts to test preemption and forward progress
rcutorture: Make rcutorture_one_extend() check reader state
rcutorture: Pretty-print rcutorture reader segments
...
Pull livepatching updates from Petr Mladek:
- Add a sysfs attribute showing the livepatch ordering
- Some code clean up
* tag 'livepatching-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: add test cases of stack_order sysfs interface
livepatch: Add stack_order sysfs attribute
selftests/livepatch: Replace hardcoded module name with variable in test-callbacks.sh
Add the OPEN4_SHARE_ACCESS_WANT constants from the nfs4.1 and delstid
draft into the nfs4_1.x file, and regenerate the headers and source
files. Do a mass renaming of NFS4_SHARE_WANT_* to
OPEN4_SHARE_ACCESS_WANT_* in the nfsd directory.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Rename the enum with the same name in include/linux/nfs4.h, add the
proper enum to nfs4_1.x and regenerate the headers and source files. Do
a mass rename of all NFS4_OPEN_DELEGATE_* to OPEN_DELEGATE_* in the nfsd
directory.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In the long run, the NFS development community intends to autogenerate a
lot of the XDR handling code. Both the NFS client and server include
"include/linux/nfs4.hi". That file was hand-rolled, and some of the symbols
in it conflict with the autogenerated symbols.
Add a small nfs4_1.x to Documentation that currently just has the
necessary definitions for the delstid draft, and generate the relevant
header and source files. Make include/linux/nfs4.h include the generated
include/linux/sunrpc/xdrgen/nfs4_1.h and remove the conflicting
definitions from it and nfs_xdr.h.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pull scheduler updates from Ingo Molnar:
"Fair scheduler (SCHED_FAIR) enhancements:
- Behavioral improvements:
- Untangle NEXT_BUDDY and pick_next_task() (Peter Zijlstra)
- Delayed-dequeue enhancements & fixes: (Vincent Guittot)
- Rename h_nr_running into h_nr_queued
- Add new cfs_rq.h_nr_runnable
- Use the new cfs_rq.h_nr_runnable
- Removed unsued cfs_rq.h_nr_delayed
- Rename cfs_rq.idle_h_nr_running into h_nr_idle
- Remove unused cfs_rq.idle_nr_running
- Rename cfs_rq.nr_running into nr_queued
- Do not try to migrate delayed dequeue task
- Fix variable declaration position
- Encapsulate set custom slice in a __setparam_fair() function
- Fixes:
- Fix race between yield_to() and try_to_wake_up() (Tianchen Ding)
- Fix CPU bandwidth limit bypass during CPU hotplug (Vishal
Chourasia)
- Cleanups:
- Clean up in migrate_degrades_locality() to improve readability
(Peter Zijlstra)
- Mark m*_vruntime() with __maybe_unused (Andy Shevchenko)
- Update comments after sched_tick() rename (Sebastian Andrzej
Siewior)
- Remove CONFIG_CFS_BANDWIDTH=n definition of cfs_bandwidth_used()
(Valentin Schneider)
Deadline scheduler (SCHED_DL) enhancements:
- Restore dl_server bandwidth on non-destructive root domain changes
(Juri Lelli)
- Correctly account for allocated bandwidth during hotplug (Juri
Lelli)
- Check bandwidth overflow earlier for hotplug (Juri Lelli)
- Clean up goto label in pick_earliest_pushable_dl_task() (John
Stultz)
- Consolidate timer cancellation (Wander Lairson Costa)
Load-balancer enhancements:
- Improve performance by prioritizing migrating eligible tasks in
sched_balance_rq() (Hao Jia)
- Do not compute NUMA Balancing stats unnecessarily during
load-balancing (K Prateek Nayak)
- Do not compute overloaded status unnecessarily during
load-balancing (K Prateek Nayak)
Generic scheduling code enhancements:
- Use READ_ONCE() in task_on_rq_queued(), to consistently use the
WRITE_ONCE() updated ->on_rq field (Harshit Agarwal)
Isolated CPUs support enhancements: (Waiman Long)
- Make "isolcpus=nohz" equivalent to "nohz_full"
- Consolidate housekeeping cpumasks that are always identical
- Remove HK_TYPE_SCHED
- Unify HK_TYPE_{TIMER|TICK|MISC} to HK_TYPE_KERNEL_NOISE
RSEQ enhancements:
- Validate read-only fields under DEBUG_RSEQ config (Mathieu
Desnoyers)
PSI enhancements:
- Fix race when task wakes up before psi_sched_switch() adjusts flags
(Chengming Zhou)
IRQ time accounting performance enhancements: (Yafang Shao)
- Define sched_clock_irqtime as static key
- Don't account irq time if sched_clock_irqtime is disabled
Virtual machine scheduling enhancements:
- Don't try to catch up excess steal time (Suleiman Souhlal)
Heterogenous x86 CPU scheduling enhancements: (K Prateek Nayak)
- Convert "sysctl_sched_itmt_enabled" to boolean
- Use guard() for itmt_update_mutex
- Move the "sched_itmt_enabled" sysctl to debugfs
- Remove x86_smt_flags and use cpu_smt_flags directly
- Use x86_sched_itmt_flags for PKG domain unconditionally
Debugging code & instrumentation enhancements:
- Change need_resched warnings to pr_err() (David Rientjes)
- Print domain name in /proc/schedstat (K Prateek Nayak)
- Fix value reported by hot tasks pulled in /proc/schedstat (Peter
Zijlstra)
- Report the different kinds of imbalances in /proc/schedstat
(Swapnil Sapkal)
- Move sched domain name out of CONFIG_SCHED_DEBUG (Swapnil Sapkal)
- Update Schedstat version to 17 (Swapnil Sapkal)"
* tag 'sched-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
rseq: Fix rseq unregistration regression
psi: Fix race when task wakes up before psi_sched_switch() adjusts flags
sched, psi: Don't account irq time if sched_clock_irqtime is disabled
sched: Don't account irq time if sched_clock_irqtime is disabled
sched: Define sched_clock_irqtime as static key
sched/fair: Do not compute overloaded status unnecessarily during lb
sched/fair: Do not compute NUMA Balancing stats unnecessarily during lb
x86/topology: Use x86_sched_itmt_flags for PKG domain unconditionally
x86/topology: Remove x86_smt_flags and use cpu_smt_flags directly
x86/itmt: Move the "sched_itmt_enabled" sysctl to debugfs
x86/itmt: Use guard() for itmt_update_mutex
x86/itmt: Convert "sysctl_sched_itmt_enabled" to boolean
sched/core: Prioritize migrating eligible tasks in sched_balance_rq()
sched/debug: Change need_resched warnings to pr_err
sched/fair: Encapsulate set custom slice in a __setparam_fair() function
sched: Fix race between yield_to() and try_to_wake_up()
docs: Update Schedstat version to 17
sched/stats: Print domain name in /proc/schedstat
sched: Move sched domain name out of CONFIG_SCHED_DEBUG
sched: Report the different kinds of imbalances in /proc/schedstat
...
Pull x86 cleanups from Ingo Molnar:
"Miscellaneous x86 cleanups and typo fixes, and also the removal of
the 'disablelapic' boot parameter"
* tag 'x86-cleanups-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Remove a stray tab in the IO-APIC type string
x86/cpufeatures: Remove "AMD" from the comments to the AMD-specific leaf
Documentation/kernel-parameters: Fix a typo in kvm.enable_virt_at_load text
x86/cpu: Fix typo in x86_match_cpu()'s doc
x86/apic: Remove "disablelapic" cmdline option
Documentation: Merge x86-specific boot options doc into kernel-parameters.txt
x86/ioremap: Remove unused size parameter in remapping functions
x86/ioremap: Simplify setup_data mapping variants
x86/boot/compressed: Remove unused header includes from kaslr.c
Pull performance events updates from Ingo Molnar:
"Seqlock optimizations that arose in a perf context and were merged
into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount (Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren
Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages in advance
(Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin
Cui)
- Export perf_exclude_event() (Namhyung Kim)
Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids"
* tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
perf: map pages in advance
perf/x86/intel/uncore: Support more units on Granite Rapids
perf/x86/intel/uncore: Clean up func_id
perf/x86/intel: Support RDPMC metrics clear mode
uprobes: Guard against kmemdup() failing in dup_return_instance()
perf/x86: Relax privilege filter restriction on AMD IBS
perf/core: Export perf_exclude_event()
uprobes: Reuse return_instances between multiple uretprobes within task
uprobes: Ensure return_instance is detached from the list before freeing
uprobes: Decouple return_instance list traversal and freeing
uprobes: Simplify session consumer tracking
uprobes: add speculative lockless VMA-to-inode-to-uprobe resolution
uprobes: simplify find_active_uprobe_rcu() VMA checks
mm: introduce mmap_lock_speculate_{try_begin|retry}
mm: convert mm_lock_seq to a proper seqcount
mm/gup: Use raw_seqcount_try_begin()
seqlock: add raw_seqcount_try_begin
perf/x86/rapl: Add core energy counter support for AMD CPUs
perf/x86/rapl: Move the cntr_mask to rapl_pmus struct
perf/x86/rapl: Remove the global variable rapl_msrs
...
Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPU. This interrupt can be used by the device driver to handle
PCIe link specific events such as Link up and Link down, which give the
driver a chance to start bus enumeration on its own when link is up and
initiate link training if link goes to a bad state. The PCIe driver can
still work without this interrupt but it will provide a nice user
experience when device gets plugged and removed.
Document the interrupt as optional for SM8550 and SM8650 platforms.
Link: https://lore.kernel.org/r/20241126-topic-sm8x50-pcie-global-irq-v1-1-4049cfccd073@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Convert device tree binding document mobiveil-pcie.txt to YAML format
and merge layerscape-pcie-gen4.txt into this file.
Additional changes:
- interrupt-names: "aer", "pme", "intr", which align order in examples.
- reg-names: reorder as csr_axi_slave, config_axi_slave to match
layerscape-pcie-gen4 and existing Layerscape DTS users.
Fix below CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dtb: /soc/pcie@3400000: failed to match any schema with compatible: ['fsl,lx2160a-pcie']
Link: https://lore.kernel.org/r/20241211171318.4129818-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: fix typos, whitespace, consistent bus-range usage]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Pull x86 SEV updates from Borislav Petkov:
- A segmented Reverse Map table (RMP) is a across-nodes distributed
table of sorts which contains per-node descriptors of each node-local
4K page, denoting its ownership (hypervisor, guest, etc) in the realm
of confidential computing. Add support for such a table in order to
improve referential locality when accessing or modifying RMP table
entries
- Add support for reading the TSC in SNP guests by removing any
interference or influence the hypervisor might have, with the goal of
making a confidential guest even more independent from the hypervisor
* tag 'x86_sev_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Add the Secure TSC feature for SNP guests
x86/tsc: Init the TSC for Secure TSC guests
x86/sev: Mark the TSC in a secure TSC guest as reliable
x86/sev: Prevent RDTSC/RDTSCP interception for Secure TSC enabled guests
x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests
x86/sev: Change TSC MSR behavior for Secure TSC enabled guests
x86/sev: Add Secure TSC support for SNP guests
x86/sev: Relocate SNP guest messaging routines to common code
x86/sev: Carve out and export SNP guest messaging init routines
virt: sev-guest: Replace GFP_KERNEL_ACCOUNT with GFP_KERNEL
virt: sev-guest: Remove is_vmpck_empty() helper
x86/sev/docs: Document the SNP Reverse Map Table (RMP)
x86/sev: Add full support for a segmented RMP table
x86/sev: Treat the contiguous RMP table as a single RMP segment
x86/sev: Map only the RMP table entries instead of the full RMP range
x86/sev: Move the SNP probe routine out of the way
x86/sev: Require the RMPREAD instruction after Zen4
x86/sev: Add support for the RMPREAD instruction
x86/sev: Prepare for using the RMPREAD instruction to access the RMP
Pull x86 resource control updates from Borislav Petkov:
- Extend resctrl with the capability of total memory bandwidth
monitoring, thus accomodating systems which support only total but
not local memory bandwidth monitoring. Add the respective new mount
options
- The usual cleanups
* tag 'x86_cache_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Document the new "mba_MBps_event" file
x86/resctrl: Add write option to "mba_MBps_event" file
x86/resctrl: Add "mba_MBps_event" file to CTRL_MON directories
x86/resctrl: Make mba_sc use total bandwidth if local is not supported
x86/resctrl: Compute memory bandwidth for all supported events
x86/resctrl: Modify update_mba_bw() to use per CTRL_MON group event
x86/resctrl: Prepare for per-CTRL_MON group mba_MBps control
x86/resctrl: Introduce resctrl_file_fflags_init() to initialize fflags
x86/resctrl: Use kthread_run_on_cpu()
Pull powerpc updates from Madhavan Srinivasan:
- Add preempt lazy support
- Deprecate cxl and cxl flash driver
- Fix a possible IOMMU related OOPS at boot on pSeries
- Optimize sched_clock() in ppc32 by replacing mulhdu() by
mul_u64_u64_shr()
Thanks to Andrew Donnellan, Andy Shevchenko, Ankur Arora, Christophe
Leroy, Frederic Barrat, Gaurav Batra, Luis Felipe Hernandez, Michael
Ellerman, Nilay Shroff, Ricardo B. Marliere, Ritesh Harjani (IBM),
Sebastian Andrzej Siewior, Shrikanth Hegde, Sourabh Jain, Thorsten Blum,
and Zhu Jun.
* tag 'powerpc-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix argument order to timer_sub()
powerpc/prom_init: Use IS_ENABLED()
powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW
powerpc: Use str_on_off() helper in check_cache_coherency()
powerpc: Large user copy aware of full:rt:lazy preemption
powerpc: Add preempt lazy support
powerpc/book3s64/hugetlb: Fix disabling hugetlb when fadump is active
powerpc/vdso: Mark the vDSO code read-only after init
powerpc/64: Use get_user() in start_thread()
macintosh: declare ctl_table as const
selftest/powerpc/ptrace: Cleanup duplicate macro definitions
selftest/powerpc/ptrace/ptrace-pkey: Remove duplicate macros
selftest/powerpc/ptrace/core-pkey: Remove duplicate macros
powerpc/8xx: Drop legacy-of-mm-gpiochip.h header
scsi/cxlflash: Deprecate driver
cxl: Deprecate driver
selftests/powerpc: Fix typo in test-vphn.c
powerpc/xmon: Use str_yes_no() helper in dump_one_paca()
powerpc/32: Replace mulhdu() by mul_u64_u64_shr()
Pull arm64 updates from Will Deacon:
"We've got a little less than normal thanks to the holidays in
December, but there's the usual summary below. The highlight is
probably the 52-bit physical addressing (LPA2) clean-up from Ard.
Confidential Computing:
- Register a platform device when running in CCA realm mode to enable
automatic loading of dependent modules
CPU Features:
- Update a bunch of system register definitions to pick up new field
encodings from the architectural documentation
- Add hwcaps and selftests for the new (2024) dpISA extensions
Documentation:
- Update EL3 (firmware) requirements for booting Linux on modern
arm64 designs
- Remove stale information about the kernel virtual memory map
Miscellaneous:
- Minor cleanups and typo fixes
Memory management:
- Fix vmemmap_check_pmd() to look at the PMD type bits
- LPA2 (52-bit physical addressing) cleanups and minor fixes
- Adjust physical address space depending upon whether or not LPA2 is
enabled
Perf and PMUs:
- Add port filtering support for NVIDIA's NVLINK-C2C Coresight PMU
- Extend AXI filtering support for the DDR PMU on NXP IMX SoCs
- Fix Designware PCIe PMU event numbering
- Add generic branch events for the Apple M1 CPU PMU
- Add support for Marvell Odyssey DDR and LLC-TAD PMUs
- Cleanups to the Hisilicon DDRC and Uncore PMU code
- Advertise discard mode for the SPE PMU
- Add the perf users mailing list to our MAINTAINERS entry"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
Documentation: arm64: Remove stale and redundant virtual memory diagrams
perf docs: arm_spe: Document new discard mode
perf: arm_spe: Add format option for discard mode
MAINTAINERS: Add perf list for drivers/perf/
arm64: Remove duplicate included header
drivers/perf: apple_m1: Map generic branch events
arm64: rsi: Add automatic arm-cca-guest module loading
kselftest/arm64: Add 2024 dpISA extensions to hwcap test
KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1
arm64/hwcap: Describe 2024 dpISA extensions to userspace
arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12
arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented
drivers/perf: hisi: Set correct IRQ affinity for PMUs with no association
arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09
...
Pull block updates from Jens Axboe:
- NVMe pull requests via Keith:
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)
- MD pull requests via Song:
- Reintroduce md-linear (Yu Kuai)
- md-bitmap refactor and fix (Yu Kuai)
- Replace kmap_atomic with kmap_local_page (David Reaver)
- Quite a few queue freeze and debugfs deadlock fixes
Ming introduced lockdep support for this in the 6.13 kernel, and it
has (unsurprisingly) uncovered quite a few issues
- Use const attributes for IO schedulers
- Remove bio ioprio wrappers
- Fixes for stacked device atomic write support
- Refactor queue affinity helpers, in preparation for better supporting
isolated CPUs
- Cleanups of loop O_DIRECT handling
- Cleanup of BLK_MQ_F_* flags
- Add rotational support for null_blk
- Various fixes and cleanups
* tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux: (106 commits)
block: Don't trim an atomic write
block: Add common atomic writes enable flag
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
block: limit disk max sectors to (LLONG_MAX >> 9)
block: Change blk_stack_atomic_writes_limits() unit_min check
block: Ensure start sector is aligned for stacking atomic writes
blk-mq: Move more error handling into blk_mq_submit_bio()
block: Reorder the request allocation code in blk_mq_submit_bio()
nvme: fix bogus kzalloc() return check in nvme_init_effects_log()
md/md-bitmap: move bitmap_{start, end}write to md upper layer
md/raid5: implement pers->bitmap_sector()
md: add a new callback pers->bitmap_sector()
md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()
md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()
md: Replace deprecated kmap_atomic() with kmap_local_page()
md: reintroduce md-linear
partitions: ldm: remove the initial kernel-doc notation
blk-cgroup: rwstat: fix kernel-doc warnings in header file
blk-cgroup: fix kernel-doc warnings in header file
nbd: fix partial sending
...
Pull bcachefs updates from Kent Overstreet:
"Lots of scalability work, another big on-disk format change. On-disk
format version goes from 1.13 to 1.20.
Like 6.11, this is another big and expensive automatic/required on
disk format upgrade. This is planned to be the last big on disk format
upgrade before the experimental label comes off. There will be one
more minor on disk format update for a few things that couldn't make
this release.
Headline improvements:
- Self healing work:
Allocator and reflink now run the exact same check/repair code that
fsck does at runtime, where applicable.
The long term goal here is to remove inconsistent() errors (that
cause us to go emergency read only) by lifting fsck code up to
normal runtime paths; we should only go emergency read-only if we
detect an inconsistency that was due to a runtime bug - or truly
catastrophic damage (corrupted btree roots/interior nodes).
- Reflink repair no longer deletes reflink pointers:
Instead we flip an error bit and log the error, and they can still
be deleted by file deletion. This means a temporary failure to find
an indirect extent (perhaps repaired later by btree node scan)
won't result in unnecessary data loss
- Improvements to rebalance data path option handling:
We can now correctly apply changed filesystem-level io path options
to pending rebalance work, and soon we'll be able to apply
file-level io path option changes to indirect extents
- Fix mount time regression that some users encountered post the 6.11
disk accounting rewrite.
Accounting keys were encoded little endian (typetag in the low
bits) - which didn't anticipate adding accounting keys for every
inode, which aren't stored in memory and we don't want to scan at
mount time.
- fsck time on large filesystems is improved by multiple orders of
magnitude. Previously, 100TB was about the practical max filesystem
size, where users were reporting fsck times of a day+. With the new
changes (which nearly eliminate backpointers fsck overhead), we
fsck'd a filesystem with 10PB of data in 1.5 hours.
The problematic fsck passes were walking every extent and checking
for missing backpointers, and walking every backpointer to check
for dangling backpointers. As we've been adding more and more
runtime self healing there was no reason to keep around the
backpointers -> extents pass; dangling backpointers are just
deleted, and we can do that when using them - thus, backpointers ->
extents is now only run in debug mode.
extents -> backpointers does need to exist, since missing
backpointers would mean we can't find data to move it (for e.g.
copygc, device evacuate, scrub). But the new on disk format version
makes possible a new strategy where we sum up backpointers within a
bucket and check it against the bucket sector counts, and then only
scan for missing backpointers if the counts are off (and then, only
for specific buckets).
Full list of on disk format changes:
- 1.14: backpointer_bucket_gen
Backpointers now have a field for the bucket generation number,
replacing the obsolete bucket_offset field. This is needed for the
new "sum up backpointers within a bucket" code, since backpointers
use the btree write buffer - meaning we will see stale reads, and
this runs online, with the filesystem in full rw mode.
- 1.15: disk_accounting_big_endian
As previously described, fix the endianness of accounting keys so
that accounting keys with the same typetag sort together, and
accounting read can skip types it's not interested in.
- 1.16: reflink_p_may_update_opts:
This version indicates that a new reflink pointer field is
understood and may be used; the field indicates whether the reflink
pointer has permissions to update IO path options (e.g.
compression, replicas) may be updated on the indirect extent it
points to.
This completes the rebalance/reflink data path option handling from
the 6.13 pull request.
- 1.17: inode_depth
Add a new inode field, bi_depth, to accelerate the
check_directory_structure fsck path, which checks for loops in the
filesystem heirarchy.
check_inodes and check_dirents check connectivity, so
check_directory_structure only has to check for loops - by walking
back up to the root from every directory.
But a path can't be a loop if it has a counter that increases
monotonically from root to leaf - adding a depth counter means that
we can check for loops with only local (parent -> child) checks. We
might need to occasionally renumber the depth field in fsck if
directories have been moved around, but then future fsck runs will
be much faster.
- 1.18: persistent_inode_cursors
Previously, the cursor used for inode allocation was only kept in
memory, which meant that users with large filesystems and lots of
files were reporting that the first create after mounting would
take awhile - since it had to scan from the start.
Inode allocation cursors are now persistent, and also include a
generation field (incremented on wraparound, which will only happen
if inode allocation is restricted to 32 bit inodes), so that we
don't have to leave inode_generation keys around after a delete.
The option for 32 bit inode numbers may now also be set on
individual directories, and non-32 bit inode allocations are
disallowed from allocating from the 32 bit part of the inode number
space.
- 1.19: autofix_errors
Runtime self healing is now the default.o
- 1.20: directory size (from Hongbo)
directory i_size is now meaningful, and not 0"
* tag 'bcachefs-2025-01-20.2' of git://evilpiepirate.org/bcachefs: (268 commits)
bcachefs: Fix check_inode_hash_info_matches_root()
bcachefs: Document issue with bch_stripe layout
bcachefs: Fix self healing on read error
bcachefs: Pop all the transactions from the abort one
bcachefs: Only abort the transactions in the cycle
bcachefs: Introduce lock_graph_pop_from
bcachefs: Convert open-coded lock_graph_pop_all to helper
bcachefs: Do not allow no fail lock request to fail
bcachefs: Merge the condition to avoid additional invocation
Revert "bcachefs: Fix bch2_btree_node_upgrade()"
bcachefs: bcachefs_metadata_version_directory_size
bcachefs: make directory i_size meaningful
bcachefs: check_unreachable_inodes is not actually PASS_ONLINE yet
bcachefs: Don't use BTREE_ITER_cached when walking alloc btree during fsck
bcachefs: Check for dirents to overwritten inodes
bcachefs: bch2_btree_iter_peek_slot() handles navigating to nonexistent depth
bcachefs: Don't set btree_path to updtodate if we don't fill
bcachefs: __bch2_btree_pos_to_text()
bcachefs: printbuf_reset() handles tabstops
bcachefs: Silence read-only errors when deleting snapshots
...
Merge cpufreq updates for 6.14:
- Use str_enable_disable()-like helpers in cpufreq (Krzysztof
Kozlowski).
- Extend the Apple cpufreq driver to support more SoCs (Hector Martin,
Nick Chan).
- Add new cpufreq driver for Airoha SoCs (Christian Marangi).
- Fix using cpufreq-dt as module (Andreas Kemnade).
- Minor fixes for Sparc, SCMI, and Qcom cpufreq drivers (Ethan Carter
Edwards, Sibi Sankar, Manivannan Sadhasivam).
- Fix the maximum supported frequency computation in the ACPI cpufreq
driver to avoid relying on unfounded assumptions (Gautham Shenoy).
- Fix an amd-pstate driver regression with preferred core rankings not
being used (Mario Limonciello).
- Fix a precision issue with frequency calculation in the amd-pstate
driver (Naresh Solanki).
- Add ftrace event to the amd-pstate driver for active mode (Mario
Limonciello).
- Set default EPP policy on Ryzen processors in amd-pstate (Mario
Limonciello).
- Clean up the amd-pstate cpufreq driver and optimize it to increase
code reuse (Mario Limonciello, Dhananjay Ugwekar).
- Use CPPC to get scaling factors between HWP performance levels and
frequency in the intel_pstate driver and make it stop using a built
-in scaling factor for the Arrow Lake processor (Rafael Wysocki).
- Make intel_pstate initialize epp_policy to CPUFREQ_POLICY_UNKNOWN for
consistency with CPU offline (Christian Loehle).
- Fix superfluous updates caused by need_freq_update in the schedutil
cpufreq governor (Sultan Alsawaf).
* pm-cpufreq: (40 commits)
cpufreq: Use str_enable_disable()-like helpers
cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver
cpufreq: ACPI: Fix max-frequency computation
cpufreq/amd-pstate: Refactor max frequency calculation
cpufreq/amd-pstate: Fix prefcore rankings
cpufreq: sparc: change kzalloc to kcalloc
cpufreq: qcom: Implement clk_ops::determine_rate() for qcom_cpufreq* clocks
cpufreq: qcom: Fix qcom_cpufreq_hw_recalc_rate() to query LUT if LMh IRQ is not available
cpufreq: apple-soc: Add Apple A7-A8X SoC cpufreq support
cpufreq: apple-soc: Set fallback transition latency to APPLE_DVFS_TRANSITION_TIMEOUT
cpufreq: apple-soc: Increase cluster switch timeout to 400us
cpufreq: apple-soc: Use 32-bit read for status register
cpufreq: apple-soc: Allow per-SoC configuration of APPLE_DVFS_CMD_PS1
cpufreq: apple-soc: Drop setting the PS2 field on M2+
dt-bindings: cpufreq: apple,cluster-cpufreq: Add A7-A11, T2 compatibles
dt-bindings: cpufreq: Document support for Airoha EN7581 CPUFreq
cpufreq: fix using cpufreq-dt as module
cpufreq: scmi: Register for limit change notifications
cpufreq: schedutil: Fix superfluous updates caused by need_freq_update
cpufreq: intel_pstate: Use CPUFREQ_POLICY_UNKNOWN
...
Pull misc vfs updates from Christian Brauner:
"Features:
- Support caching symlink lengths in inodes
The size is stored in a new union utilizing the same space as
i_devices, thus avoiding growing the struct or taking up any more
space
When utilized it dodges strlen() in vfs_readlink(), giving about
1.5% speed up when issuing readlink on /initrd.img on ext4
- Add RWF_DONTCACHE iocb and FOP_DONTCACHE file_operations flag
If a file system supports uncached buffered IO, it may set
FOP_DONTCACHE and enable support for RWF_DONTCACHE.
If RWF_DONTCACHE is attempted without the file system supporting
it, it'll get errored with -EOPNOTSUPP
- Enable VBOXGUEST and VBOXSF_FS on ARM64
Now that VirtualBox is able to run as a host on arm64 (e.g. the
Apple M3 processors) we can enable VBOXSF_FS (and in turn
VBOXGUEST) for this architecture.
Tested with various runs of bonnie++ and dbench on an Apple MacBook
Pro with the latest Virtualbox 7.1.4 r165100 installed
Cleanups:
- Delay sysctl_nr_open check in expand_files()
- Use kernel-doc includes in fiemap docbook
- Use page->private instead of page->index in watch_queue
- Use a consume fence in mnt_idmap() as it's heavily used in
link_path_walk()
- Replace magic number 7 with ARRAY_SIZE() in fc_log
- Sort out a stale comment about races between fd alloc and dup2()
- Fix return type of do_mount() from long to int
- Various cosmetic cleanups for the lockref code
Fixes:
- Annotate spinning as unlikely() in __read_seqcount_begin
The annotation already used to be there, but got lost in commit
52ac39e5db ("seqlock: seqcount_t: Implement all read APIs as
statement expressions")
- Fix proc_handler for sysctl_nr_open
- Flush delayed work in delayed fput()
- Fix grammar and spelling in propagate_umount()
- Fix ESP not readable during coredump
In /proc/PID/stat, there is the kstkesp field which is the stack
pointer of a thread. While the thread is active, this field reads
zero. But during a coredump, it should have a valid value
However, at the moment, kstkesp is zero even during coredump
- Don't wake up the writer if the pipe is still full
- Fix unbalanced user_access_end() in select code"
* tag 'vfs-6.14-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits)
gfs2: use lockref_init for qd_lockref
erofs: use lockref_init for pcl->lockref
dcache: use lockref_init for d_lockref
lockref: add a lockref_init helper
lockref: drop superfluous externs
lockref: use bool for false/true returns
lockref: improve the lockref_get_not_zero description
lockref: remove lockref_put_not_zero
fs: Fix return type of do_mount() from long to int
select: Fix unbalanced user_access_end()
vbox: Enable VBOXGUEST and VBOXSF_FS on ARM64
pipe_read: don't wake up the writer if the pipe is still full
selftests: coredump: Add stackdump test
fs/proc: do_task_stat: Fix ESP not readable during coredump
fs: add RWF_DONTCACHE iocb and FOP_DONTCACHE file_operations flag
fs: sort out a stale comment about races between fd alloc and dup2
fs: Fix grammar and spelling in propagate_umount()
fs: fc_log replace magic number 7 with ARRAY_SIZE()
fs: use a consume fence in mnt_idmap()
file: flush delayed work in delayed fput()
...
ASoC: Updates for v6.14
This was quite a quiet release for what I imagine are holiday related
reasons, the diffstat is dominated by some Cirrus Logic Kunit tests.
There's the usual mix of small improvements and fixes, plus a few new
drivers and features. The diffstat includes some DRM changes due to
work on HDMI audio.
- Allow clocking on each DAI in an audio graph card to be configured
separately.
- Improved power management for Renesas RZ-SSI.
- KUnit testing for the Cirrus DSP framework.
- Memory to meory operation support for Freescale/NXP platforms.
- Support for pause operations in SOF.
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
Merge ARM cpufreq updates for 6.14 from Viresh Kumar:
"- Extended support for more SoCs in apple cpufreq driver (Hector Martin
and Nick Chan).
- Add new cpufreq driver for Airoha SoCs (Christian Marangi).
- Fix using cpufreq-dt as module (Andreas Kemnade).
- Minor fixes for Sparc, scmi, and Qcom drivers (Ethan Carter Edwards,
Sibi Sankar and Manivannan Sadhasivam)."
* tag 'cpufreq-arm-updates-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver
cpufreq: sparc: change kzalloc to kcalloc
cpufreq: qcom: Implement clk_ops::determine_rate() for qcom_cpufreq* clocks
cpufreq: qcom: Fix qcom_cpufreq_hw_recalc_rate() to query LUT if LMh IRQ is not available
cpufreq: apple-soc: Add Apple A7-A8X SoC cpufreq support
cpufreq: apple-soc: Set fallback transition latency to APPLE_DVFS_TRANSITION_TIMEOUT
cpufreq: apple-soc: Increase cluster switch timeout to 400us
cpufreq: apple-soc: Use 32-bit read for status register
cpufreq: apple-soc: Allow per-SoC configuration of APPLE_DVFS_CMD_PS1
cpufreq: apple-soc: Drop setting the PS2 field on M2+
dt-bindings: cpufreq: apple,cluster-cpufreq: Add A7-A11, T2 compatibles
dt-bindings: cpufreq: Document support for Airoha EN7581 CPUFreq
cpufreq: fix using cpufreq-dt as module
cpufreq: scmi: Register for limit change notifications
KVM x86 misc changes for 6.14:
- Overhaul KVM's CPUID feature infrastructure to track all vCPU capabilities
instead of just those where KVM needs to manage state and/or explicitly
enable the feature in hardware. Along the way, refactor the code to make
it easier to add features, and to make it more self-documenting how KVM
is handling each feature.
- Rework KVM's handling of VM-Exits during event vectoring; this plugs holes
where KVM unintentionally puts the vCPU into infinite loops in some scenarios
(e.g. if emulation is triggered by the exit), and brings parity between VMX
and SVM.
- Add pending request and interrupt injection information to the kvm_exit and
kvm_entry tracepoints respectively.
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU when
loading guest/host PKRU, due to a refactoring of the kernel helpers that
didn't account for KVM's pre-checking of the need to do WRPKRU.
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Reorder includes for distributed-arp-table.c, by Sven Eckelmann
- Fix translation table change handling, by Remi Pommarel (2 patches)
- Map VID 0 to untagged TT VLAN, by Sven Eckelmann
- Update MAINTAINERS/mailmap e-mail addresses, by the respective authors
(4 patches)
- netlink: reduce duplicate code by returning interfaces,
by Linus Lüssing
* tag 'batadv-next-pullrequest-20250117' of git://git.open-mesh.org/linux-merge:
batman-adv: netlink: reduce duplicate code by returning interfaces
MAINTAINERS: mailmap: add entries for Antonio Quartulli
mailmap: add entries for Sven Eckelmann
mailmap: add entries for Simon Wunderlich
MAINTAINERS: update email address of Marek Linder
batman-adv: Map VID 0 to untagged TT VLAN
batman-adv: Don't keep redundant TT change events
batman-adv: Remove atomic usage for tt.local_changes
batman-adv: Reorder includes for distributed-arp-table.c
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250117123910.219278-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add new VID/PID 13d3/3610 for MT7922
- btusb: Add new VID/PID 13d3/3628 for MT7925
- btusb: Add MT7921e device 13d3:3576
- btusb: Add RTL8851BE device 13d3:3600
- btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x
- btusb: add sysfs attribute to control USB alt setting
- qca: Expand firmware-name property
- qca: Fix poor RF performance for WCN6855
- L2CAP: handle NULL sock pointer in l2cap_sock_alloc
- Allow reset via sysfs
- ISO: Allow BIG re-sync
- dt-bindings: Utilize PMU abstraction for WCN6750
- MGMT: Mark LL Privacy as stable
* tag 'for-net-next-2025-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (23 commits)
Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync
Bluetooth: qca: Fix poor RF performance for WCN6855
Bluetooth: Allow reset via sysfs
Bluetooth: Get rid of cmd_timeout and use the reset callback
Bluetooth: Remove the cmd timeout count in btusb
Bluetooth: Use str_enable_disable-like helpers
Bluetooth: btmtk: Remove resetting mt7921 before downloading the fw
Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc
Bluetooth: btusb: Add RTL8851BE device 13d3:3600
dt-bindings: bluetooth: Utilize PMU abstraction for WCN6750
Bluetooth: btusb: Add MT7921e device 13d3:3576
Bluetooth: btrtl: check for NULL in btrtl_setup_realtek()
Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name()
Bluetooth: qca: Expand firmware-name to load specific rampatch
Bluetooth: qca: Update firmware-name to support board specific nvm
dt-bindings: net: bluetooth: qca: Expand firmware-name property
Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925
Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922
Bluetooth: btusb: add sysfs attribute to control USB alt setting
Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x
...
====================
Link: https://patch.msgid.link/20250117213203.3921910-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of SYN + MPC retransmissions before falling back to TCP was
fixed to 2. This is certainly a good default value, but having a fixed
number can be a problem in some environments.
The current behaviour means that if all packets are dropped, there will
be:
- The initial SYN + MPC
- 2 retransmissions with MPC
- The next ones will be without MPTCP.
So typically ~3 seconds before falling back to TCP. In some networks
where some temporally blackholes are unfortunately frequent, or when a
client tries to initiate connections while the network is not ready yet,
this can cause new connections not to have MPTCP connections.
In such environments, it is now possible to increase the number of SYN
retransmissions with MPTCP options to make sure MPTCP is used.
Interesting values are:
- 0: the first retransmission will be done without MPTCP options: quite
aggressive, but also a higher risk of detecting false-positive
MPTCP blackholes.
- >= 128: all SYN retransmissions will keep the MPTCP options: back to
the < 6.12 behaviour.
The default behaviour is not changed here.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250117-net-next-mptcp-syn_retrans_before_tcp_fallback-v1-1-ab4b187099b0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Charlie Jenkins <charlie@rivosinc.com> says:
xtheadvector is a custom extension that is based upon riscv vector
version 0.7.1 [1]. All of the vector routines have been modified to
support this alternative vector version based upon whether xtheadvector
was determined to be supported at boot.
vlenb is not supported on the existing xtheadvector hardware, so a
devicetree property thead,vlenb is added to provide the vlenb to Linux.
There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is
used to request which thead vendor extensions are supported on the
current platform. This allows future vendors to allocate hwprobe keys
for their vendor.
Support for xtheadvector is also added to the vector kselftests.
[1] 95358cb2cc/xtheadvector.adoc
* b4-shazam-merge:
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-0-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add a property analogous to the vlenb CSR so that software can detect
the vector length of each CPU prior to it being brought online.
Currently software has to assume that the vector length read from the
boot CPU applies to all possible CPUs. On T-Head CPUs implementing
pre-ratification vector, reading the th.vlenb CSR may produce an illegal
instruction trap, so this property is required on such systems.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-2-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
For packets with two-step timestamp requests, the hardware timestamp
comes back to the driver through a confirmation mechanism of sorts,
which allows the driver to confidently bump the successful "pkts"
counter.
For one-step PTP, the NIC is supposed to autonomously insert its
hardware TX timestamp in the packet headers while simultaneously
transmitting it. There may be a confirmation that this was done
successfully, or there may not.
None of the current drivers which implement ethtool_ops :: get_ts_stats()
also support HWTSTAMP_TX_ONESTEP_SYNC or HWTSTAMP_TX_ONESTEP_SYNC, so it
is a bit unclear which model to follow. But there are NICs, such as DSA,
where there is no transmit confirmation at all. Here, it would be wrong /
misleading to increment the successful "pkts" counter, because one-step
PTP packets can be dropped on TX just like any other packets.
So introduce a special counter which signifies "yes, an attempt was made,
but we don't know whether it also exited the port or not". I expect that
for one-step PTP packets where a confirmation is available, the "pkts"
counter would be bumped.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
