mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-06-13 08:20:31 -04:00
a7ac203d8fd366bb6318f856466f52484c623d05
3875 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
fc02cb2b37 |
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
|
||
|
Jakub Kicinski
|
b7b98f8689 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-11-01 We've added 181 non-merge commits during the last 28 day(s) which contain a total of 280 files changed, 11791 insertions(+), 5879 deletions(-). The main changes are: 1) Fix bpf verifier propagation of 64-bit bounds, from Alexei. 2) Parallelize bpf test_progs, from Yucong and Andrii. 3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus. 4) Improve bpf selftests on s390, from Ilya. 5) bloomfilter bpf map type, from Joanne. 6) Big improvements to JIT tests especially on Mips, from Johan. 7) Support kernel module function calls from bpf, from Kumar. 8) Support typeless and weak ksym in light skeleton, from Kumar. 9) Disallow unprivileged bpf by default, from Pawan. 10) BTF_KIND_DECL_TAG support, from Yonghong. 11) Various bpftool cleanups, from Quentin. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits) libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose bpf: Factor out helpers for ctx access checking bpf: Factor out a helper to prepare trampoline for struct_ops prog selftests, bpf: Fix broken riscv build riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h tools, build: Add RISC-V to HOSTARCH parsing riscv, bpf: Increase the maximum number of iterations selftests, bpf: Add one test for sockmap with strparser selftests, bpf: Fix test_txmsg_ingress_parser error ... ==================== Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
9a7e0a90a4 |
Merge tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner: - Revert the printk format based wchan() symbol resolution as it can leak the raw value in case that the symbol is not resolvable. - Make wchan() more robust and work with all kind of unwinders by enforcing that the task stays blocked while unwinding is in progress. - Prevent sched_fork() from accessing an invalid sched_task_group - Improve asymmetric packing logic - Extend scheduler statistics to RT and DL scheduling classes and add statistics for bandwith burst to the SCHED_FAIR class. - Properly account SCHED_IDLE entities - Prevent a potential deadlock when initial priority is assigned to a newly created kthread. A recent change to plug a race between cpuset and __sched_setscheduler() introduced a new lock dependency which is now triggered. Break the lock dependency chain by moving the priority assignment to the thread function. - Fix the idle time reporting in /proc/uptime for NOHZ enabled systems. - Improve idle balancing in general and especially for NOHZ enabled systems. - Provide proper interfaces for live patching so it does not have to fiddle with scheduler internals. - Add cluster aware scheduling support. - A small set of tweaks for RT (irqwork, wait_task_inactive(), various scheduler options and delaying mmdrop) - The usual small tweaks and improvements all over the place * tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits) sched/fair: Cleanup newidle_balance sched/fair: Remove sysctl_sched_migration_cost condition sched/fair: Wait before decaying max_newidle_lb_cost sched/fair: Skip update_blocked_averages if we are defering load balance sched/fair: Account update_blocked_averages in newidle_balance cost x86: Fix __get_wchan() for !STACKTRACE sched,x86: Fix L2 cache mask sched/core: Remove rq_relock() sched: Improve wake_up_all_idle_cpus() take #2 irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support. sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ sched: Add cluster scheduler level for x86 sched: Add cluster scheduler level in core and related Kconfig for ARM64 topology: Represent clusters of CPUs within a die sched: Disable -Wunused-but-set-variable sched: Add wrapper for get_wchan() to keep task blocked x86: Fix get_wchan() to support the ORC unwinder proc: Use task_is_running() for wchan in /proc/$pid/stat ... |
||
|
Linus Torvalds
|
49f8275c7d |
Merge tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache
Pull memory folios from Matthew Wilcox: "Add memory folios, a new type to represent either order-0 pages or the head page of a compound page. This should be enough infrastructure to support filesystems converting from pages to folios. The point of all this churn is to allow filesystems and the page cache to manage memory in larger chunks than PAGE_SIZE. The original plan was to use compound pages like THP does, but I ran into problems with some functions expecting only a head page while others expect the precise page containing a particular byte. The folio type allows a function to declare that it's expecting only a head page. Almost incidentally, this allows us to remove various calls to VM_BUG_ON(PageTail(page)) and compound_head(). This converts just parts of the core MM and the page cache. For 5.17, we intend to convert various filesystems (XFS and AFS are ready; other filesystems may make it) and also convert more of the MM and page cache to folios. For 5.18, multi-page folios should be ready. The multi-page folios offer some improvement to some workloads. The 80% win is real, but appears to be an artificial benchmark (postgres startup, which isn't a serious workload). Real workloads (eg building the kernel, running postgres in a steady state, etc) seem to benefit between 0-10%. I haven't heard of any performance losses as a result of this series. Nobody has done any serious performance tuning; I imagine that tweaking the readahead algorithm could provide some more interesting wins. There are also other places where we could choose to create large folios and currently do not, such as writes that are larger than PAGE_SIZE. I'd like to thank all my reviewers who've offered review/ack tags: Christoph Hellwig, David Howells, Jan Kara, Jeff Layton, Johannes Weiner, Kirill A. Shutemov, Michal Hocko, Mike Rapoport, Vlastimil Babka, William Kucharski, Yu Zhao and Zi Yan. I'd also like to thank those who gave feedback I incorporated but haven't offered up review tags for this part of the series: Nick Piggin, Mel Gorman, Ming Lei, Darrick Wong, Ted Ts'o, John Hubbard, Hugh Dickins, and probably a few others who I forget" * tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache: (90 commits) mm/writeback: Add folio_write_one mm/filemap: Add FGP_STABLE mm/filemap: Add filemap_get_folio mm/filemap: Convert mapping_get_entry to return a folio mm/filemap: Add filemap_add_folio() mm/filemap: Add filemap_alloc_folio mm/page_alloc: Add folio allocation functions mm/lru: Add folio_add_lru() mm/lru: Convert __pagevec_lru_add_fn to take a folio mm: Add folio_evictable() mm/workingset: Convert workingset_refault() to take a folio mm/filemap: Add readahead_folio() mm/filemap: Add folio_mkwrite_check_truncate() mm/filemap: Add i_blocks_per_folio() mm/writeback: Add folio_redirty_for_writepage() mm/writeback: Add folio_account_redirty() mm/writeback: Add folio_clear_dirty_for_io() mm/writeback: Add folio_cancel_dirty() mm/writeback: Add folio_account_cleaned() mm/writeback: Add filemap_dirty_folio() ... |
||
|
Matthew Wilcox (Oracle)
|
08b0b0059b |
mm: Add flush_dcache_folio()
This is a default implementation which calls flush_dcache_page() on each page in the folio. If architectures can do better, they should implement their own version of it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
||
|
Kees Cook
|
42a20f86dc |
sched: Add wrapper for get_wchan() to keep task blocked
Having a stable wchan means the process must be blocked and for it to stay that way while performing stack unwinding. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm] Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64] Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org |
||
|
Jakub Kicinski
|
9fe1155233 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Johan Almbladh
|
f7c036c15b |
mips, uasm: Add workaround for Loongson-2F nop CPU errata
This patch implements a workaround for the Loongson-2F nop in generated, code, if the existing option CONFIG_CPU_NOP_WORKAROUND is set. Before, the binutils option -mfix-loongson2f-nop was enabled, but no workaround was done when emitting MIPS code. Now, the nop pseudo instruction is emitted as "or ax,ax,zero" instead of the default "sll zero,zero,0". This is consistent with the workaround implemented by binutils. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Link: https://sourceware.org/legacy-ml/binutils/2009-11/msg00387.html Link: https://lore.kernel.org/bpf/20211005165408.2305108-3-johan.almbladh@anyfinetworks.com |
||
|
Tony Ambardar
|
e737547eab |
mips, uasm: Enable muhu opcode for MIPS R6
Enable the 'muhu' instruction, complementing the existing 'mulu', needed to implement a MIPS32 BPF JIT. Also fix a typo in the existing definition of 'dmulu'. Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com> Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211005165408.2305108-2-johan.almbladh@anyfinetworks.com |
||
|
Ilya Lipnitskiy
|
740da9d7ca |
MIPS: Revert "add support for buggy MT7621S core detection"
This reverts commit |
||
|
Stephen Rothwell
|
10d48705d5 |
fix up for "net: add new socket option SO_RESERVE_MEM"
Some architectures do not include uapi/asm/socket.h
Fixes:
|
||
|
Jakub Kicinski
|
561bed688b |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts! Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aleksander Jan Bajkowski
|
49293bbc50 |
MIPS: lantiq: dma: make the burst length configurable by the drivers
Make the burst length configurable by the drivers. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Arnd Bergmann
|
a7a08b275a |
arch: remove compat_alloc_user_space
All users of compat_alloc_user_space() and copy_in_user() have been removed from the kernel, only a few functions in sparc remain that can be changed to calling arch_copy_in_user() instead. Link: https://lkml.kernel.org/r/20210727144859.4150043-7-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
d6742212c0 |
Merge tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer: - converted Pistachio platform to use MIPS generic kernel - fixes and cleanups * tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits) MIPS: Malta: fix alignment of the devicetree buffer MIPS: ingenic: Unconditionally enable clock of CPU #0 MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports MIPS: mscc: ocelot: disable all switch ports by default MAINTAINERS: adjust PISTACHIO SOC SUPPORT after its retirement MIPS: Return true/false (not 1/0) from bool functions MIPS: generic: Return true/false (not 1/0) from bool functions MIPS: Make a alias for pistachio_defconfig MIPS: Retire MACH_PISTACHIO MIPS: config: generic: Add config for Marduk board pinctrl: pistachio: Make it as an option phy: pistachio-usb: Depend on MIPS || COMPILE_TEST clocksource/drivers/pistachio: Make it selectable for MIPS clk: pistachio: Make it selectable for generic MIPS kernel MIPS: DTS: Pistachio add missing cpc and cdmm MIPS: generic: Allow generating FIT image for Marduk board MIPS: locking/atomic: Fix atomic{_64,}_sub_if_positive MIPS: loongson2ef: don't build serial.o unconditionally MIPS: Replace deprecated CPU-hotplug functions. MIPS: Alchemy: Fix spelling contraction "cant" -> "can't" ... |
||
|
Linus Torvalds
|
14726903c8 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ... |
||
|
Christoph Hellwig
|
f358afc52c |
mm: remove flush_kernel_dcache_page
flush_kernel_dcache_page is a rather confusing interface that implements a
subset of flush_dcache_page by not being able to properly handle page
cache mapped pages.
The only callers left are in the exec code as all other previous callers
were incorrect as they could have dealt with page cache pages. Replace
the calls to flush_kernel_dcache_page with calls to flush_dcache_page,
which for all architectures does either exactly the same thing, can
contains one or more of the following:
1) an optimization to defer the cache flush for page cache pages not
mapped into userspace
2) additional flushing for mapped page cache pages if cache aliases
are possible
Link: https://lkml.kernel.org/r/20210712060928.4161649-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
df43d90382 |
Merge tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek: - Optionally, provide an index of possible printk messages via <debugfs>/printk/index/. It can be used when monitoring important kernel messages on a farm of various hosts. The monitor has to be updated when some messages has changed or are not longer available by a newly deployed kernel. - Add printk.console_no_auto_verbose boot parameter. It allows to generate crash dump even with slow consoles in a reasonable time frame. - Remove printk_safe buffers. The messages are always stored directly to the main logbuffer, even in NMI or recursive context. Also it allows to serialize syslog operations by a mutex instead of a spin lock. - Misc clean up and build fixes. * tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk/index: Fix -Wunused-function warning lib/nmi_backtrace: Serialize even messages about idle CPUs printk: Add printk.console_no_auto_verbose boot parameter printk: Remove console_silent() lib/test_scanf: Handle n_bits == 0 in random tests printk: syslog: close window between wait and read printk: convert @syslog_lock to mutex printk: remove NMI tracking printk: remove safe buffers printk: track/limit recursion lib/nmi_backtrace: explicitly serialize banner and regs printk: Move the printk() kerneldoc comment to its new home printk/index: Fix warning about missing prototypes MIPS/asm/printk: Fix build failure caused by printk printk: index: Add indexing support to dev_printk printk: Userspace format indexing support printk: Rework parse_prefix into printk_parse_prefix printk: Straighten out log_flags into printk_info_flags string_helpers: Escape double quotes in escape_special printk/console: Check consistent sequence number when handling race in console_unlock() |
||
|
Linus Torvalds
|
48983701a1 |
Merge branch 'siginfo-si_trapno-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo si_trapno updates from Eric Biederman: "The full set of si_trapno changes was not appropriate as a fix for the newly added SIGTRAP TRAP_PERF, and so I postponed the rest of the related cleanups. This is the rest of the cleanups for si_trapno that reduces it from being a really weird arch special case that is expect to be always present (but isn't) on the architectures that support it to being yet another field in the _sigfault union of struct siginfo. The changes have been reviewed and marinated in linux-next. With the removal of this awkward special case new code (like SIGTRAP TRAP_PERF) that works across architectures should be easier to write and maintain" * 'siginfo-si_trapno-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Rename SIL_PERF_EVENT SIL_FAULT_PERF_EVENT for consistency signal: Verify the alignment and size of siginfo_t signal: Remove the generic __ARCH_SI_TRAPNO support signal/alpha: si_trapno is only used with SIGFPE and SIGTRAP TRAP_UNK signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRP arm64: Add compile-time asserts for siginfo_t offsets arm: Add compile-time asserts for siginfo_t offsets sparc64: Add compile-time asserts for siginfo_t offsets |
||
|
Linus Torvalds
|
9e9fb7655e |
Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
|
||
|
Linus Torvalds
|
679369114e |
Merge tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe: "Nothing major in here - lots of good cleanups and tech debt handling, which is also evident in the diffstats. In particular: - Add disk sequence numbers (Matteo) - Discard merge fix (Ming) - Relax disk zoned reporting restrictions (Niklas) - Bio error handling zoned leak fix (Pavel) - Start of proper add_disk() error handling (Luis, Christoph) - blk crypto fix (Eric) - Non-standard GPT location support (Dmitry) - IO priority improvements and cleanups (Damien)o - blk-throtl improvements (Chunguang) - diskstats_show() stack reduction (Abd-Alrhman) - Loop scheduler selection (Bart) - Switch block layer to use kmap_local_page() (Christoph) - Remove obsolete disk_name helper (Christoph) - block_device refcounting improvements (Christoph) - Ensure gendisk always has a request queue reference (Christoph) - Misc fixes/cleanups (Shaokun, Oliver, Guoqing)" * tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits) sg: pass the device name to blk_trace_setup block, bfq: cleanup the repeated declaration blk-crypto: fix check for too-large dun_bytes blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN blk-zoned: allow zone management send operations without CAP_SYS_ADMIN block: mark blkdev_fsync static block: refine the disk_live check in del_gendisk mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA mmc: block: Support alternative_gpt_sector() operation partitions/efi: Support non-standard GPT location block: Add alternative_gpt_sector() operation bio: fix page leak bio_add_hw_page failure block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT block: remove a pointless call to MINOR() in device_add_disk null_blk: add error handling support for add_disk() virtio_blk: add error handling support for add_disk() block: add error handling for device_add_disk / add_disk block: return errors from disk_alloc_events block: return errors from blk_integrity_add block: call blk_register_queue earlier in device_add_disk ... |
||
|
Jakub Kicinski
|
f4083a752a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h |
||
|
Linus Torvalds
|
cb407fc81d |
Merge tag 'mips-fixes_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer: "Fix PMD accounting change" * tag 'mips-fixes_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: check return value of pgtable_pmd_page_ctor |
||
|
Huang Pei
|
6aa3246729 |
MIPS: check return value of pgtable_pmd_page_ctor
+. According to Documentation/vm/split_page_table_lock, handle failure
of pgtable_pmd_page_ctor
+. Use GFP_KERNEL_ACCOUNT instead of GFP_KERNEL|__GFP_ACCOUNT
+. Adjust coding style
Fixes:
|
||
|
Rui Wang
|
cb95ea79b3 |
MIPS: locking/atomic: Fix atomic{_64,}_sub_if_positive
This looks like a typo and that caused atomic64 test failed. Signed-off-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Pavel Tikhomirov
|
04190bf894 |
sock: allow reading and changing sk_userlocks with setsockopt
SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags disable automatic socket
buffers adjustment done by kernel (see tcp_fixup_rcvbuf() and
tcp_sndbuf_expand()). If we've just created a new socket this adjustment
is enabled on it, but if one changes the socket buffer size by
setsockopt(SO_{SND,RCV}BUF*) it becomes disabled.
CRIU needs to call setsockopt(SO_{SND,RCV}BUF*) on each socket on
restore as it first needs to increase buffer sizes for packet queues
restore and second it needs to restore back original buffer sizes. So
after CRIU restore all sockets become non-auto-adjustable, which can
decrease network performance of restored applications significantly.
CRIU need to be able to restore sockets with enabled/disabled adjustment
to the same state it was before dump, so let's add special setsockopt
for it.
Let's also export SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags to uAPI so
that using these interface one can reenable automatic socket buffer
adjustment on their sockets.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Christoph Hellwig
|
4c7251e1b5 |
MIPS: don't include <linux/genhd.h> in <asm/mach-rc32434/rb.h>
There is no need to include genhd.h from a random arch header, and not doing so prevents the possibility for nasty include loops. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20210727055646.118787-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Eric W. Biederman
|
c7fff9288d |
signal: Remove the generic __ARCH_SI_TRAPNO support
Now that __ARCH_SI_TRAPNO is no longer set by any architecture remove all of the code it enabled from the kernel. On alpha and sparc a more explict approach of using send_sig_fault_trapno or force_sig_fault_trapno in the very limited circumstances where si_trapno was set to a non-zero value. The generic support that is being removed always set si_trapno on all fault signals. With only SIGILL ILL_ILLTRAP on sparc and SIGFPE and SIGTRAP TRAP_UNK on alpla providing si_trapno values asking all senders of fault signals to provide an si_trapno value does not make sense. Making si_trapno an ordinary extension of the fault siginfo layout has enabled the architecture generic implementation of SIGTRAP TRAP_PERF, and enables other faulting signals to grow architecture generic senders as well. v1: https://lkml.kernel.org/r/m18s4zs7nu.fsf_-_@fess.ebiederm.org v2: https://lkml.kernel.org/r/20210505141101.11519-8-ebiederm@xmission.com Link: https://lkml.kernel.org/r/87bl73xx6x.fsf_-_@disp2133 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
|
David S. Miller
|
5af84df962 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts are simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Arnd Bergmann
|
1a33b18b3b |
compat: make linux/compat.h available everywhere
Parts of linux/compat.h are under an #ifdef, but we end up using more of those over time, moving things around bit by bit. To get it over with once and for all, make all of this file uncondititonal now so it can be accessed everywhere. There are only a few types left that are in asm/compat.h but not yet in the asm-generic version, so add those in the process. This requires providing a few more types in asm-generic/compat.h that were not already there. The only tricky one is compat_sigset_t, which needs a little help on 32-bit architectures and for x86. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Petr Mladek
|
86ce91d556 |
MIPS/asm/printk: Fix build failure caused by printk
The commit |
||
|
周琰杰 (Zhou Yanjie)
|
14d72af7ab |
MIPS: Ingenic: Add system type for new Ingenic SoCs.
Add JZ4730, JZ4750, JZ4755, JZ4760, JZ4760B, X2000H, and X2100 system type for cat /proc/cpuinfo to give out JZ4730, JZ4750, JZ4755, JZ4760, JZ4760B, X2000H, and X2100. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Gustavo A. R. Silva
|
cf6678aec2 |
MIPS: Fix unreachable code issue
Fix the following warning (mips-randconfig): arch/mips/include/asm/fpu.h:79:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough] Originally, the /* fallthrough */ comment was introduced by commit: |
||
|
Linus Torvalds
|
98f7fdced2 |
Merge tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two fixes:
- Fix a MIPS IRQ handling RCU bug
- Remove a DocBook annotation for a parameter that doesn't exist
anymore"
* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
genirq/irqdesc: Drop excess kernel-doc entry @lookup
|
||
|
Linus Torvalds
|
379cf80a98 |
Merge tag 'mips_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer: - fix for accesing gic via vdso - two build fixes * tag 'mips_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: vdso: Invalid GIC access through VDSO mips: disable branch profiling in boot/decompress.o mips: always link byteswap helpers into decompressor |
||
|
Thomas Gleixner
|
4840048356 |
Merge tag 'irqchip-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier: - Fix a MIPS bug where irqdomain loopkups could occur in a context where RCU is not allowed - Fix a documentation bug for handle_domain_irq |
||
|
Martin Fäcknitz
|
47ce8527fb |
MIPS: vdso: Invalid GIC access through VDSO
Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO
doesn't return the correct time when using the GIC as clock source.
The address of the GIC mapped page is in this case not calculated
correctly. The GIC mapped page is calculated from the VDSO data by
subtracting PAGE_SIZE:
void *get_gic(const struct vdso_data *data) {
return (void __iomem *)data - PAGE_SIZE;
}
However, the data pointer is not page aligned for raw clock sources.
This is because the VDSO data for raw clock sources (CS_RAW = 1) is
stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0).
Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:
+--------------------+
| |
| vd[CS_RAW] | ---+
| vd[CS_HRES_COARSE] | |
+--------------------+ | -PAGE_SIZE
| | |
| GIC mapped page | <--+
| |
+--------------------+
When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns
the wrong address (somewhere inside the GIC mapped page). The GIC counter
values are not returned which results in an invalid time.
Fixes:
|
||
|
Marc Zyngier
|
1fee9db9b4 |
irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
Since
|
||
|
Aneesh Kumar K.V
|
dc4875f0e7 |
mm: rename p4d_page_vaddr to p4d_pgtable and make it return pud_t *
No functional change in this patch. [aneesh.kumar@linux.ibm.com: m68k build error reported by kernel robot] Link: https://lkml.kernel.org/r/87tulxnb2v.fsf@linux.ibm.com Link: https://lkml.kernel.org/r/20210615110859.320299-2-aneesh.kumar@linux.ibm.com Link: https://lore.kernel.org/linuxppc-dev/CAHk-=wi+J+iodze9FtjM3Zi4j4OeS+qqbKxME9QN4roxPEXH9Q@mail.gmail.com/ Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Aneesh Kumar K.V
|
9cf6fa2458 |
mm: rename pud_page_vaddr to pud_pgtable and make it return pmd_t *
No functional change in this patch. [aneesh.kumar@linux.ibm.com: fix] Link: https://lkml.kernel.org/r/87wnqtnb60.fsf@linux.ibm.com [sfr@canb.auug.org.au: another fix] Link: https://lkml.kernel.org/r/20210619134410.89559-1-aneesh.kumar@linux.ibm.com Link: https://lkml.kernel.org/r/20210615110859.320299-1-aneesh.kumar@linux.ibm.com Link: https://lore.kernel.org/linuxppc-dev/CAHk-=wi+J+iodze9FtjM3Zi4j4OeS+qqbKxME9QN4roxPEXH9Q@mail.gmail.com/ Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
a16d8644ba |
Merge tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH: "Here is the big set of IIO and staging driver patches for 5.14-rc1. Loads of IIO driver updates and additions in here, the shortlog has the full details. For the staging side, we moved a few drivers out of staging, and deleted the kpc2000 drivers as the original developer asked us to because no one was working on them anymore. Also in here are loads of coding style cleanups due to different intern projects focusing on the staging tree to try to get experience doing kernel development. All of these have been in the linux-next tree for a while with no reported problems" * tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (744 commits) staging: hi6421-spmi-pmic: cleanup some macros staging: hi6421-spmi-pmic: change identation of a table staging: hi6421-spmi-pmic: change a return code staging: hi6421-spmi-pmic: better name IRQs staging: hi6421-spmi-pmic: use devm_request_threaded_irq() staging: hisilicon,hi6421-spmi-pmic.yaml: cleanup descriptions spmi: hisi-spmi-controller: move driver from staging phy: phy-hi3670-usb3: move driver from staging into phy staging: rtl8188eu: remove include/rtw_debug.h header staging: rtl8188eu: remove GlobalDebugLevel variable staging: rtl8188eu: remove DRIVER_PREFIX preprocessor definition staging: rtl8188eu: remove RT_TRACE macro staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_recv.c staging: rtl8188eu: remove all RT_TRACE calls from hal/hal_intf.c staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_xmit.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_xmit.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_pwrctrl.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_recv.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ioctl_set.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ieee80211.c ... |
||
|
Linus Torvalds
|
71bd934101 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "190 patches. Subsystems affected by this patch series: mm (hugetlb, userfaultfd, vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock, migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap, zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc, core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs, signals, exec, kcov, selftests, compress/decompress, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits) ipc/util.c: use binary search for max_idx ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock ipc: use kmalloc for msg_queue and shmid_kernel ipc sem: use kvmalloc for sem_undo allocation lib/decompressors: remove set but not used variabled 'level' selftests/vm/pkeys: exercise x86 XSAVE init state selftests/vm/pkeys: refill shadow register after implicit kernel write selftests/vm/pkeys: handle negative sys_pkey_alloc() return code selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random kcov: add __no_sanitize_coverage to fix noinstr for all architectures exec: remove checks in __register_bimfmt() x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned hfsplus: report create_date to kstat.btime hfsplus: remove unnecessary oom message nilfs2: remove redundant continue statement in a while-loop kprobes: remove duplicated strong free_insn_page in x86 and s390 init: print out unknown kernel parameters checkpatch: do not complain about positive return values starting with EPOLL checkpatch: improve the indented label test checkpatch: scripts/spdxcheck.py now requires python3 ... |
||
|
Linus Torvalds
|
19b4385922 |
Merge tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer: - add support for OpeneEmbed SOM9331 board - Ingenic fixes/improvments - other fixes and cleanups * tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (39 commits) MIPS: Fix PKMAP with 32-bit MIPS huge page support MIPS: CI20: Add second percpu timer for SMP. MIPS: CI20: Reduce clocksource to 750 kHz. MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs. dt-bindings: clock: Add documentation for MAC PHY control bindings. MIPS: X1830: Respect cell count of common properties. MIPS: set mips32r5 for virt extensions MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops MIPS: MT extensions are not available on MIPS32r1 mips/kvm: Use BUG_ON instead of if condition followed by BUG MIPS: OCTEON: octeon-usb: Use devm_platform_get_and_ioremap_resource() MIPS: add PMD table accounting into MIPS'pmd_alloc_one MIPS: Loongson64: fix spelling of SPDX tag MIPS: ingenic: rs90: Add dedicated VRAM memory region MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radio MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER MIPS: Kconfig: ingenic: Ensure MACH_INGENIC_GENERIC selects all SoCs MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B) MIPS: boot: Support specifying UART port on Ingenic SoCs ... |
||
|
Linus Torvalds
|
a32b344e6f |
Merge tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.14 kernel. Not so
much going on. No core changes, just drivers.
The most interesting would be that MIPS Ralink is migrating to pin
control and we have some bindings but not yet code for the Apple M1
pin controller.
New drivers:
- Last merge window we created a driver for the Ralink RT2880. We are
now moving the Ralink SoC pin control drivers out of the MIPS
architecture code and into the pin control subsystem. This concerns
RT288X, MT7620, RT305X, RT3883 and MT7621.
- Qualcomm SM6125 SoC pin control driver.
- Qualcomm spmi-gpio support for PM7325.
- Qualcomm spmi-mpp also handles PMI8994 (just a compatible string)
- Mediatek MT8365 SoC pin controller.
- New device HID for the AMD GPIO controller.
Improvements:
- Pin bias config support for a slew of Renesas pin controllers.
- Incremental improvements and non-urgent bug fixes to the Renesas
SoC drivers.
- Implement irq_set_wake on the AMD pin controller so we can wake up
from external pin events.
Misc:
- Devicetree bindings for the Apple M1 pin controller, we will
probably see a proper driver for this soon as well"
* tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (54 commits)
pinctrl: ralink: rt305x: add missing include
pinctrl: stm32: check for IRQ MUX validity during alloc()
pinctrl: zynqmp: some code cleanups
drivers: qcom: pinctrl: Add pinctrl driver for sm6125
dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver
dt-bindings: pinctrl: mcp23s08: add documentation for reset-gpios
pinctrl: mcp23s08: Add optional reset GPIO
pinctrl: mediatek: fix mode encoding
pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq()
pinctrl: bcm: Constify static pinmux_ops
pinctrl: bcm: Constify static pinctrl_ops
pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' file
pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file
pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' file
pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' file
pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' file
pinctrl: ralink: move ralink architecture pinmux header into the driver
pinctrl: single: config: enable the pin's input
pinctrl: mtk: Fix mt8365 Kconfig dependency
pinctrl: mcp23s08: fix race condition in irq handler
...
|
||
|
Linus Torvalds
|
514798d365 |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round has a diffstat dominated by Qualcomm clk drivers. Honestly
though that's just a bunch of data so the diffstat reflects that.
Looking beyond that there's just a bunch of updates all around in
various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors
that have a lot of patches in here.
Overall the driver changes look to be mostly enabling more clks and
non-critical fixes that we could hold until the next merge window.
I'm especially excited about the series from Arnd that graduates
clkdev to be the only implementation of clk_get() and clk_put().
That's a good step in the right direction to migreate eveerything over
to the common clk framework. Now we don't have to worry about clkdev
specific details, they're just part of the clk API now.
Core:
- clkdev is now the only option, i.e. clk_get()/clk_put() is
implemented in only one place in the kernel instead of in
drivers/clk/clkdev.c and in architectures that want their own
implementation
New Drivers:
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant
Clock Jitter Cleaner With Dual Loop PLLs
- Qualcomm MDM9607 GCC
- Qualcomm SC8180X display clks
- Qualcomm SM6125 GCC
- Qualcomm SM8250 CAMCC (camera)
- Renesas RZ/G2L SoC
- Hisilicon hi3559A SoC
Updates:
- Stop using clock-output-names in ST clk drivers (yay!)
- Support secure mode of STM32MP1 SoCs
- Improve clock support for Actions S500 SoC
- duty cycle setting support on qcom clks
- Add TI am33xx spread spectrum clock support
- Use determine_rate() for the Amlogic pll ops instead of
round_rate()
- Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
- Improve Amlogic axg-audio controller error on deferral
- Add NNA clocks on Amlogic g12a
- Reduce memory footprint of Rockchip PLL rate tables
- A fix for the newly added Rockchip rk3568 clk driver
- Exported clock for the newly added Rockchip video decoder
- Remove audio ipg clock from i.MX8MP
- Remove deprecated legacy clock binding for i.MX SCU clock driver
- Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
- Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif,
audio, parallel interface)
- Add dedicated clock ops for i.MX paralel interface
- Different fixes for clocks controlled by ATF on i.MX SoCs
- Add A53/A72 frequency scaling support i.MX clk-scu driver
- Add special case for DCSS clock on suspend for i.MX clk-scu driver
- Add parent save/restore on suspend/resume to i.MX clk-scu driver
- Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
- Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
bindings
- Tegra clk driver no longer deasserts resets on clk_enable as it
gets in the way of certain power-up sequences
- Fix compile testing for Tegra clk driver
- One patch to fix a divider on the Allwinner v3s Audio PLL
- Add support for CPU core clock boost modes on Renesas R-Car Gen3
- Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
- Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and
improve support for multiple parents
- Switch Renesas RZ/N1 divider clocks to .determine_rate()
- Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
- Convert ar7 to common clk framework
- Convert ralink to common clk framework"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits)
clk: zynqmp: Handle divider specific read only flag
clk: zynqmp: Use firmware specific mux clock flags
clk: zynqmp: Use firmware specific divider clock flags
clk: zynqmp: Use firmware specific common clock flags
clk: lmk04832: Use of match table
clk: lmk04832: Depend on SPI
clk: stm32mp1: new compatible for secure RCC support
dt-bindings: clock: stm32mp1 new compatible for secure rcc
dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
reset: stm32mp1: remove stm32mp1 reset
clk: hisilicon: Add clock driver for hi3559A SoC
dt-bindings: Document the hi3559a clock bindings
clk: si5341: Add sysfs properties to allow checking/resetting device faults
clk: si5341: Add silabs,iovdd-33 property
clk: si5341: Add silabs,xaxb-ext-clk property
clk: si5341: Allow different output VDD_SEL values
clk: si5341: Update initialization magic
clk: si5341: Check for input clock presence and PLL lock on startup
...
|
||
|
Anshuman Khandual
|
1c2f7d14d8 |
mm/thp: define default pmd_pgtable()
Currently most platforms define pmd_pgtable() as pmd_page() duplicating the same code all over. Instead just define a default value i.e pmd_page() for pmd_pgtable() and let platforms override when required via <asm/pgtable.h>. All the existing platform that override pmd_pgtable() have been moved into their respective <asm/pgtable.h> header in order to precede before the new generic definition. This makes it much cleaner with reduced code. Link: https://lkml.kernel.org/r/1623646133-20306-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Anshuman Khandual
|
fac7757e1f |
mm: define default value for FIRST_USER_ADDRESS
Currently most platforms define FIRST_USER_ADDRESS as 0UL duplication the same code all over. Instead just define a generic default value (i.e 0UL) for FIRST_USER_ADDRESS and let the platforms override when required. This makes it much cleaner with reduced code. The default FIRST_USER_ADDRESS here would be skipped in <linux/pgtable.h> when the given platform overrides its value via <asm/pgtable.h>. Link: https://lkml.kernel.org/r/1620615725-24623-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Stafford Horne <shorne@gmail.com> [openrisc] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> [RISC-V] Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
4ca9b3859d |
mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables
I. Background: Sparse Memory Mappings When we manage sparse memory mappings dynamically in user space - also sometimes involving MAP_NORESERVE - we want to dynamically populate/ discard memory inside such a sparse memory region. Example users are hypervisors (especially implementing memory ballooning or similar technologies like virtio-mem) and memory allocators. In addition, we want to fail in a nice way (instead of generating SIGBUS) if populating does not succeed because we are out of backend memory (which can happen easily with file-based mappings, especially tmpfs and hugetlbfs). While MADV_DONTNEED, MADV_REMOVE and FALLOC_FL_PUNCH_HOLE allow for reliably discarding memory for most mapping types, there is no generic approach to populate page tables and preallocate memory. Although mmap() supports MAP_POPULATE, it is not applicable to the concept of sparse memory mappings, where we want to populate/discard dynamically and avoid expensive/problematic remappings. In addition, we never actually report errors during the final populate phase - it is best-effort only. fallocate() can be used to preallocate file-based memory and fail in a safe way. However, it cannot really be used for any private mappings on anonymous files via memfd due to COW semantics. In addition, fallocate() does not actually populate page tables, so we still always get pagefaults on first access - which is sometimes undesired (i.e., real-time workloads) and requires real prefaulting of page tables, not just a preallocation of backend storage. There might be interesting use cases for sparse memory regions along with mlockall(MCL_ONFAULT) which fallocate() cannot satisfy as it does not prefault page tables. II. On preallcoation/prefaulting from user space Because we don't have a proper interface, what applications (like QEMU and databases) end up doing is touching (i.e., reading+writing one byte to not overwrite existing data) all individual pages. However, that approach 1) Can result in wear on storage backing, because we end up reading/writing each page; this is especially a problem for dax/pmem. 2) Can result in mmap_sem contention when prefaulting via multiple threads. 3) Requires expensive signal handling, especially to catch SIGBUS in case of hugetlbfs/shmem/file-backed memory. For example, this is problematic in hypervisors like QEMU where SIGBUS handlers might already be used by other subsystems concurrently to e.g, handle hardware errors. "Simply" doing preallocation concurrently from other thread is not that easy. III. On MADV_WILLNEED Extending MADV_WILLNEED is not an option because 1. It would change the semantics: "Expect access in the near future." and "might be a good idea to read some pages" vs. "Definitely populate/ preallocate all memory and definitely fail on errors.". 2. Existing users (like virtio-balloon in QEMU when deflating the balloon) don't want populate/prealloc semantics. They treat this rather as a hint to give a little performance boost without too much overhead - and don't expect that a lot of memory might get consumed or a lot of time might be spent. IV. MADV_POPULATE_READ and MADV_POPULATE_WRITE Let's introduce MADV_POPULATE_READ and MADV_POPULATE_WRITE, inspired by MAP_POPULATE, with the following semantics: 1. MADV_POPULATE_READ can be used to prefault page tables just like manually reading each individual page. This will not break any COW mappings. The shared zero page might get mapped and no backend storage might get preallocated -- allocation might be deferred to write-fault time. Especially shared file mappings require an explicit fallocate() upfront to actually preallocate backend memory (blocks in the file system) in case the file might have holes. 2. If MADV_POPULATE_READ succeeds, all page tables have been populated (prefaulted) readable once. 3. MADV_POPULATE_WRITE can be used to preallocate backend memory and prefault page tables just like manually writing (or reading+writing) each individual page. This will break any COW mappings -- e.g., the shared zeropage is never populated. 4. If MADV_POPULATE_WRITE succeeds, all page tables have been populated (prefaulted) writable once. 5. MADV_POPULATE_READ and MADV_POPULATE_WRITE cannot be applied to special mappings marked with VM_PFNMAP and VM_IO. Also, proper access permissions (e.g., PROT_READ, PROT_WRITE) are required. If any such mapping is encountered, madvise() fails with -EINVAL. 6. If MADV_POPULATE_READ or MADV_POPULATE_WRITE fails, some page tables might have been populated. 7. MADV_POPULATE_READ and MADV_POPULATE_WRITE will return -EHWPOISON when encountering a HW poisoned page in the range. 8. Similar to MAP_POPULATE, MADV_POPULATE_READ and MADV_POPULATE_WRITE cannot protect from the OOM (Out Of Memory) handler killing the process. While the use case for MADV_POPULATE_WRITE is fairly obvious (i.e., preallocate memory and prefault page tables for VMs), one issue is that whenever we prefault pages writable, the pages have to be marked dirty, because the CPU could dirty them any time. while not a real problem for hugetlbfs or dax/pmem, it can be a problem for shared file mappings: each page will be marked dirty and has to be written back later when evicting. MADV_POPULATE_READ allows for optimizing this scenario: Pre-read a whole mapping from backend storage without marking it dirty, such that eviction won't have to write it back. As discussed above, shared file mappings might require an explciit fallocate() upfront to achieve preallcoation+prepopulation. Although sparse memory mappings are the primary use case, this will also be useful for other preallocate/prefault use cases where MAP_POPULATE is not desired or the semantics of MAP_POPULATE are not sufficient: as one example, QEMU users can trigger preallocation/prefaulting of guest RAM after the mapping was created -- and don't want errors to be silently suppressed. Looking at the history, MADV_POPULATE was already proposed in 2013 [1], however, the main motivation back than was performance improvements -- which should also still be the case. V. Single-threaded performance comparison I did a short experiment, prefaulting page tables on completely *empty mappings/files* and repeated the experiment 10 times. The results correspond to the shortest execution time. In general, the performance benefit for huge pages is negligible with small mappings. V.1: Private mappings POPULATE_READ and POPULATE_WRITE is fastest. Note that Reading/POPULATE_READ will populate the shared zeropage where applicable -- which result in short population times. The fastest way to allocate backend storage (here: swap or huge pages) and prefault page tables is POPULATE_WRITE. V.2: Shared mappings fallocate() is fastest, however, doesn't prefault page tables. POPULATE_WRITE is faster than simple writes and read/writes. POPULATE_READ is faster than simple reads. Without a fd, the fastest way to allocate backend storage and prefault page tables is POPULATE_WRITE. With an fd, the fastest way is usually FALLOCATE+POPULATE_READ or FALLOCATE+POPULATE_WRITE respectively; one exception are actual files: FALLOCATE+Read is slightly faster than FALLOCATE+POPULATE_READ. The fastest way to allocate backend storage prefault page tables is FALLOCATE+POPULATE_WRITE -- except when dealing with actual files; then, FALLOCATE+POPULATE_READ is fastest and won't directly mark all pages as dirty. v.3: Detailed results ================================================== 2 MiB MAP_PRIVATE: ************************************************** Anon 4 KiB : Read : 0.119 ms Anon 4 KiB : Write : 0.222 ms Anon 4 KiB : Read/Write : 0.380 ms Anon 4 KiB : POPULATE_READ : 0.060 ms Anon 4 KiB : POPULATE_WRITE : 0.158 ms Memfd 4 KiB : Read : 0.034 ms Memfd 4 KiB : Write : 0.310 ms Memfd 4 KiB : Read/Write : 0.362 ms Memfd 4 KiB : POPULATE_READ : 0.039 ms Memfd 4 KiB : POPULATE_WRITE : 0.229 ms Memfd 2 MiB : Read : 0.030 ms Memfd 2 MiB : Write : 0.030 ms Memfd 2 MiB : Read/Write : 0.030 ms Memfd 2 MiB : POPULATE_READ : 0.030 ms Memfd 2 MiB : POPULATE_WRITE : 0.030 ms tmpfs : Read : 0.033 ms tmpfs : Write : 0.313 ms tmpfs : Read/Write : 0.406 ms tmpfs : POPULATE_READ : 0.039 ms tmpfs : POPULATE_WRITE : 0.285 ms file : Read : 0.033 ms file : Write : 0.351 ms file : Read/Write : 0.408 ms file : POPULATE_READ : 0.039 ms file : POPULATE_WRITE : 0.290 ms hugetlbfs : Read : 0.030 ms hugetlbfs : Write : 0.030 ms hugetlbfs : Read/Write : 0.030 ms hugetlbfs : POPULATE_READ : 0.030 ms hugetlbfs : POPULATE_WRITE : 0.030 ms ************************************************** 4096 MiB MAP_PRIVATE: ************************************************** Anon 4 KiB : Read : 237.940 ms Anon 4 KiB : Write : 708.409 ms Anon 4 KiB : Read/Write : 1054.041 ms Anon 4 KiB : POPULATE_READ : 124.310 ms Anon 4 KiB : POPULATE_WRITE : 572.582 ms Memfd 4 KiB : Read : 136.928 ms Memfd 4 KiB : Write : 963.898 ms Memfd 4 KiB : Read/Write : 1106.561 ms Memfd 4 KiB : POPULATE_READ : 78.450 ms Memfd 4 KiB : POPULATE_WRITE : 805.881 ms Memfd 2 MiB : Read : 357.116 ms Memfd 2 MiB : Write : 357.210 ms Memfd 2 MiB : Read/Write : 357.606 ms Memfd 2 MiB : POPULATE_READ : 356.094 ms Memfd 2 MiB : POPULATE_WRITE : 356.937 ms tmpfs : Read : 137.536 ms tmpfs : Write : 954.362 ms tmpfs : Read/Write : 1105.954 ms tmpfs : POPULATE_READ : 80.289 ms tmpfs : POPULATE_WRITE : 822.826 ms file : Read : 137.874 ms file : Write : 987.025 ms file : Read/Write : 1107.439 ms file : POPULATE_READ : 80.413 ms file : POPULATE_WRITE : 857.622 ms hugetlbfs : Read : 355.607 ms hugetlbfs : Write : 355.729 ms hugetlbfs : Read/Write : 356.127 ms hugetlbfs : POPULATE_READ : 354.585 ms hugetlbfs : POPULATE_WRITE : 355.138 ms ************************************************** 2 MiB MAP_SHARED: ************************************************** Anon 4 KiB : Read : 0.394 ms Anon 4 KiB : Write : 0.348 ms Anon 4 KiB : Read/Write : 0.400 ms Anon 4 KiB : POPULATE_READ : 0.326 ms Anon 4 KiB : POPULATE_WRITE : 0.273 ms Anon 2 MiB : Read : 0.030 ms Anon 2 MiB : Write : 0.030 ms Anon 2 MiB : Read/Write : 0.030 ms Anon 2 MiB : POPULATE_READ : 0.030 ms Anon 2 MiB : POPULATE_WRITE : 0.030 ms Memfd 4 KiB : Read : 0.412 ms Memfd 4 KiB : Write : 0.372 ms Memfd 4 KiB : Read/Write : 0.419 ms Memfd 4 KiB : POPULATE_READ : 0.343 ms Memfd 4 KiB : POPULATE_WRITE : 0.288 ms Memfd 4 KiB : FALLOCATE : 0.137 ms Memfd 4 KiB : FALLOCATE+Read : 0.446 ms Memfd 4 KiB : FALLOCATE+Write : 0.330 ms Memfd 4 KiB : FALLOCATE+Read/Write : 0.454 ms Memfd 4 KiB : FALLOCATE+POPULATE_READ : 0.379 ms Memfd 4 KiB : FALLOCATE+POPULATE_WRITE : 0.268 ms Memfd 2 MiB : Read : 0.030 ms Memfd 2 MiB : Write : 0.030 ms Memfd 2 MiB : Read/Write : 0.030 ms Memfd 2 MiB : POPULATE_READ : 0.030 ms Memfd 2 MiB : POPULATE_WRITE : 0.030 ms Memfd 2 MiB : FALLOCATE : 0.030 ms Memfd 2 MiB : FALLOCATE+Read : 0.031 ms Memfd 2 MiB : FALLOCATE+Write : 0.031 ms Memfd 2 MiB : FALLOCATE+Read/Write : 0.031 ms Memfd 2 MiB : FALLOCATE+POPULATE_READ : 0.030 ms Memfd 2 MiB : FALLOCATE+POPULATE_WRITE : 0.030 ms tmpfs : Read : 0.416 ms tmpfs : Write : 0.369 ms tmpfs : Read/Write : 0.425 ms tmpfs : POPULATE_READ : 0.346 ms tmpfs : POPULATE_WRITE : 0.295 ms tmpfs : FALLOCATE : 0.139 ms tmpfs : FALLOCATE+Read : 0.447 ms tmpfs : FALLOCATE+Write : 0.333 ms tmpfs : FALLOCATE+Read/Write : 0.454 ms tmpfs : FALLOCATE+POPULATE_READ : 0.380 ms tmpfs : FALLOCATE+POPULATE_WRITE : 0.272 ms file : Read : 0.191 ms file : Write : 0.511 ms file : Read/Write : 0.524 ms file : POPULATE_READ : 0.196 ms file : POPULATE_WRITE : 0.434 ms file : FALLOCATE : 0.004 ms file : FALLOCATE+Read : 0.197 ms file : FALLOCATE+Write : 0.554 ms file : FALLOCATE+Read/Write : 0.480 ms file : FALLOCATE+POPULATE_READ : 0.201 ms file : FALLOCATE+POPULATE_WRITE : 0.381 ms hugetlbfs : Read : 0.030 ms hugetlbfs : Write : 0.030 ms hugetlbfs : Read/Write : 0.030 ms hugetlbfs : POPULATE_READ : 0.030 ms hugetlbfs : POPULATE_WRITE : 0.030 ms hugetlbfs : FALLOCATE : 0.030 ms hugetlbfs : FALLOCATE+Read : 0.031 ms hugetlbfs : FALLOCATE+Write : 0.031 ms hugetlbfs : FALLOCATE+Read/Write : 0.030 ms hugetlbfs : FALLOCATE+POPULATE_READ : 0.030 ms hugetlbfs : FALLOCATE+POPULATE_WRITE : 0.030 ms ************************************************** 4096 MiB MAP_SHARED: ************************************************** Anon 4 KiB : Read : 1053.090 ms Anon 4 KiB : Write : 913.642 ms Anon 4 KiB : Read/Write : 1060.350 ms Anon 4 KiB : POPULATE_READ : 893.691 ms Anon 4 KiB : POPULATE_WRITE : 782.885 ms Anon 2 MiB : Read : 358.553 ms Anon 2 MiB : Write : 358.419 ms Anon 2 MiB : Read/Write : 357.992 ms Anon 2 MiB : POPULATE_READ : 357.533 ms Anon 2 MiB : POPULATE_WRITE : 357.808 ms Memfd 4 KiB : Read : 1078.144 ms Memfd 4 KiB : Write : 942.036 ms Memfd 4 KiB : Read/Write : 1100.391 ms Memfd 4 KiB : POPULATE_READ : 925.829 ms Memfd 4 KiB : POPULATE_WRITE : 804.394 ms Memfd 4 KiB : FALLOCATE : 304.632 ms Memfd 4 KiB : FALLOCATE+Read : 1163.359 ms Memfd 4 KiB : FALLOCATE+Write : 933.186 ms Memfd 4 KiB : FALLOCATE+Read/Write : 1187.304 ms Memfd 4 KiB : FALLOCATE+POPULATE_READ : 1013.660 ms Memfd 4 KiB : FALLOCATE+POPULATE_WRITE : 794.560 ms Memfd 2 MiB : Read : 358.131 ms Memfd 2 MiB : Write : 358.099 ms Memfd 2 MiB : Read/Write : 358.250 ms Memfd 2 MiB : POPULATE_READ : 357.563 ms Memfd 2 MiB : POPULATE_WRITE : 357.334 ms Memfd 2 MiB : FALLOCATE : 356.735 ms Memfd 2 MiB : FALLOCATE+Read : 358.152 ms Memfd 2 MiB : FALLOCATE+Write : 358.331 ms Memfd 2 MiB : FALLOCATE+Read/Write : 358.018 ms Memfd 2 MiB : FALLOCATE+POPULATE_READ : 357.286 ms Memfd 2 MiB : FALLOCATE+POPULATE_WRITE : 357.523 ms tmpfs : Read : 1087.265 ms tmpfs : Write : 950.840 ms tmpfs : Read/Write : 1107.567 ms tmpfs : POPULATE_READ : 922.605 ms tmpfs : POPULATE_WRITE : 810.094 ms tmpfs : FALLOCATE : 306.320 ms tmpfs : FALLOCATE+Read : 1169.796 ms tmpfs : FALLOCATE+Write : 933.730 ms tmpfs : FALLOCATE+Read/Write : 1191.610 ms tmpfs : FALLOCATE+POPULATE_READ : 1020.474 ms tmpfs : FALLOCATE+POPULATE_WRITE : 798.945 ms file : Read : 654.101 ms file : Write : 1259.142 ms file : Read/Write : 1289.509 ms file : POPULATE_READ : 661.642 ms file : POPULATE_WRITE : 1106.816 ms file : FALLOCATE : 1.864 ms file : FALLOCATE+Read : 656.328 ms file : FALLOCATE+Write : 1153.300 ms file : FALLOCATE+Read/Write : 1180.613 ms file : FALLOCATE+POPULATE_READ : 668.347 ms file : FALLOCATE+POPULATE_WRITE : 996.143 ms hugetlbfs : Read : 357.245 ms hugetlbfs : Write : 357.413 ms hugetlbfs : Read/Write : 357.120 ms hugetlbfs : POPULATE_READ : 356.321 ms hugetlbfs : POPULATE_WRITE : 356.693 ms hugetlbfs : FALLOCATE : 355.927 ms hugetlbfs : FALLOCATE+Read : 357.074 ms hugetlbfs : FALLOCATE+Write : 357.120 ms hugetlbfs : FALLOCATE+Read/Write : 356.983 ms hugetlbfs : FALLOCATE+POPULATE_READ : 356.413 ms hugetlbfs : FALLOCATE+POPULATE_WRITE : 356.266 ms ************************************************** [1] https://lkml.org/lkml/2013/6/27/698 [akpm@linux-foundation.org: coding style fixes] Link: https://lkml.kernel.org/r/20210419135443.12822-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
dbe69e4337 |
Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
|
||
|
Wei Li
|
cf02ce742f |
MIPS: Fix PKMAP with 32-bit MIPS huge page support
When 32-bit MIPS huge page support is enabled, we halve the number of
pointers a PTE page holds, making its last half go to waste.
Correspondingly, we should halve the number of kmap entries, as we just
initialized only a single pte table for that in pagetable_init().
Fixes:
|