Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add support for 'syn'.
Syn is a parsing library for parsing a stream of Rust tokens into a
syntax tree of Rust source code.
Currently this library is geared toward use in Rust procedural
macros, but contains some APIs that may be useful more generally.
'syn' allows us to greatly simplify writing complex macros such as
'pin-init' (Benno has already prepared the 'syn'-based version). We
will use it in the 'macros' crate too.
'syn' is the most downloaded Rust crate (according to crates.io),
and it is also used by the Rust compiler itself. While the amount
of code is substantial, there should not be many updates needed for
these crates, and even if there are, they should not be too big,
e.g. +7k -3k lines across the 3 crates in the last year.
'syn' requires two smaller dependencies: 'quote' and 'proc-macro2'.
I only modified their code to remove a third dependency
('unicode-ident') and to add the SPDX identifiers. The code can be
easily verified to exactly match upstream with the provided
scripts.
They are all licensed under "Apache-2.0 OR MIT", like the other
vendored 'alloc' crate we had for a while.
Please see the merge commit with the cover letter for more context.
- Allow 'unreachable_pub' and 'clippy::disallowed_names' for
doctests.
Examples (i.e. doctests) may want to do things like show public
items and use names such as 'foo'.
Nevertheless, we still try to keep examples as close to real code
as possible (this is part of why running Clippy on doctests is
important for us, e.g. for safety comments, which userspace Rust
does not support yet but we are stricter).
'kernel' crate:
- Replace our custom 'CStr' type with 'core::ffi::CStr'.
Using the standard library type reduces our custom code footprint,
and we retain needed custom functionality through an extension
trait and a new 'fmt!' macro which replaces the previous 'core'
import.
This started in 6.17 and continued in 6.18, and we finally land the
replacement now. This required quite some stamina from Tamir, who
split the changes in steps to prepare for the flag day change here.
- Replace 'kernel::c_str!' with C string literals.
C string literals were added in Rust 1.77, which produce '&CStr's
(the 'core' one), so now we can write:
c"hi"
instead of:
c_str!("hi")
- Add 'num' module for numerical features.
It includes the 'Integer' trait, implemented for all primitive
integer types.
It also includes the 'Bounded' integer wrapping type: an integer
value that requires only the 'N' least significant bits of the
wrapped type to be encoded:
// An unsigned 8-bit integer, of which only the 4 LSBs are used.
let v = Bounded::<u8, 4>:🆕:<15>();
assert_eq!(v.get(), 15);
'Bounded' is useful to e.g. enforce guarantees when working with
bitfields that have an arbitrary number of bits.
Values can also be constructed from simple non-constant expressions
or, for more complex ones, validated at runtime.
'Bounded' also comes with comparison and arithmetic operations
(with both their backing type and other 'Bounded's with a
compatible backing type), casts to change the backing type,
extending/shrinking and infallible/fallible conversions from/to
primitives as applicable.
- 'rbtree' module: add immutable cursor ('Cursor').
It enables to use just an immutable tree reference where
appropriate. The existing fully-featured mutable cursor is renamed
to 'CursorMut'.
kallsyms:
- Fix wrong "big" kernel symbol type read from procfs.
'pin-init' crate:
- A couple minor fixes (Benno asked me to pick these patches up for
him this cycle).
Documentation:
- Quick Start guide: add Debian 13 (Trixie).
Debian Stable is now able to build Linux, since Debian 13 (released
2025-08-09) packages Rust 1.85.0, which is recent enough.
We are planning to propose that the minimum supported Rust version
in Linux follows Debian Stable releases, with Debian 13 being the
first one we upgrade to, i.e. Rust 1.85.
MAINTAINERS:
- Add entry for the new 'num' module.
- Remove Alex as Rust maintainer: he hasn't had the time to
contribute for a few years now, so it is a no-op change in
practice.
And a few other cleanups and improvements"
* tag 'rust-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (53 commits)
rust: macros: support `proc-macro2`, `quote` and `syn`
rust: syn: enable support in kbuild
rust: syn: add `README.md`
rust: syn: remove `unicode-ident` dependency
rust: syn: add SPDX License Identifiers
rust: syn: import crate
rust: quote: enable support in kbuild
rust: quote: add `README.md`
rust: quote: add SPDX License Identifiers
rust: quote: import crate
rust: proc-macro2: enable support in kbuild
rust: proc-macro2: add `README.md`
rust: proc-macro2: remove `unicode_ident` dependency
rust: proc-macro2: add SPDX License Identifiers
rust: proc-macro2: import crate
rust: kbuild: support using libraries in `rustc_procmacro`
rust: kbuild: support skipping flags in `rustc_test_library`
rust: kbuild: add proc macro library support
rust: kbuild: simplify `--cfg` handling
rust: kbuild: introduce `core-flags` and `core-skip_flags`
...
Pull cred guard updates from Christian Brauner:
"This contains substantial credential infrastructure improvements
adding guard-based credential management that simplifies code and
eliminates manual reference counting in many subsystems.
Features:
- Kernel Credential Guards
Add with_kernel_creds() and scoped_with_kernel_creds() guards that
allow using the kernel credentials without allocating and copying
them. This was requested by Linus after seeing repeated
prepare_kernel_creds() calls that duplicate the kernel credentials
only to drop them again later.
The new guards completely avoid the allocation and never expose the
temporary variable to hold the kernel credentials anywhere in
callers.
- Generic Credential Guards
Add scoped_with_creds() guards for the common override_creds() and
revert_creds() pattern. This builds on earlier work that made
override_creds()/revert_creds() completely reference count free.
- Prepare Credential Guards
Add prepare credential guards for the more complex pattern of
preparing a new set of credentials and overriding the current
credentials with them:
- prepare_creds()
- modify new creds
- override_creds()
- revert_creds()
- put_cred()
Cleanups:
- Make init_cred static since it should not be directly accessed
- Add kernel_cred() helper to properly access the kernel credentials
- Fix scoped_class() macro that was introduced two cycles ago
- coredump: split out do_coredump() from vfs_coredump() for cleaner
credential handling
- coredump: move revert_cred() before coredump_cleanup()
- coredump: mark struct mm_struct as const
- coredump: pass struct linux_binfmt as const
- sev-dev: use guard for path"
* tag 'kernel-6.19-rc1.cred' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
trace: use override credential guard
trace: use prepare credential guard
coredump: use override credential guard
coredump: use prepare credential guard
coredump: split out do_coredump() from vfs_coredump()
coredump: mark struct mm_struct as const
coredump: pass struct linux_binfmt as const
coredump: move revert_cred() before coredump_cleanup()
sev-dev: use override credential guards
sev-dev: use prepare credential guard
sev-dev: use guard for path
cred: add prepare credential guard
net/dns_resolver: use credential guards in dns_query()
cgroup: use credential guards in cgroup_attach_permissions()
act: use credential guards in acct_write_process()
smb: use credential guards in cifs_get_spnego_key()
nfs: use credential guards in nfs_idmap_get_key()
nfs: use credential guards in nfs_local_call_write()
nfs: use credential guards in nfs_local_call_read()
erofs: use credential guards
...
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec5 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c4 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c00 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9 ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update all struct proto_ops connect() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull block fixes from Jens Axboe:
- Fix blk-crypto reporting EIO when EINVAL is the correct error code
- Two bug fixes for the block zone support
- NVME pull request via Keith:
- Target side authentication fixup
- Peer-to-peer metadata fixup
- null_blk DMA alignment fix
* tag 'block-6.18-20251031' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
null_blk: set dma alignment to logical block size
blk-crypto: use BLK_STS_INVAL for alignment errors
block: make REQ_OP_ZONE_OPEN a write operation
block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL
nvme-pci: use blk_map_iter for p2p metadata
nvmet-auth: update sc_c in host response
This driver assumes that bio vectors are memory aligned to the logical
block size, so set the queue limit to reflect that.
Unless we set up the limit based on the logical block size, we will go
out of page bounds in copy_to_nullb / copy_from_nullb.
Apparently this wasn't noticed so far because none of the tests generate
such buffers, but since commit 851c4c96db ("xfs: implement
XFS_IOC_DIOINFO in terms of vfs_getattr") xfstests generates unaligned
I/O, which now lead to memory corruption when using null_blk devices
with 4k block size.
Fixes: bf8d08532b ("iomap: add support for dma aligned direct-io")
Fixes: b1a000d3b8 ("block: relax direct io memory alignment")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block fixes from Jens Axboe:
- Fix dma alignment for PI
- Fix selinux bogosity with nbd, where sendmsg would get rejected
* tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: require LBA dma_alignment when using PI
nbd: override creds to kernel when calling sock_{send,recv}msg()
sock_{send,recv}msg() internally calls security_socket_{send,recv}msg(),
which does security checks (e.g. SELinux) for socket access against the
current task. However, _sock_xmit() in drivers/block/nbd.c may be called
indirectly from a userspace syscall, where the NBD socket access would
be incorrectly checked against the calling userspace task (which simply
tries to read/write a file that happens to reside on an NBD device).
To fix this, temporarily override creds to kernel ones before calling
the sock_*() functions. This allows the security modules to recognize
this as internal access by the kernel, which will normally be allowed.
A way to trigger the issue is to do the following (on a system with
SELinux set to enforcing):
### Create nbd device:
truncate -s 256M /tmp/testfile
nbd-server localhost:10809 /tmp/testfile
### Connect to the nbd server:
nbd-client localhost
### Create mdraid array
mdadm --create -l 1 -n 2 /dev/md/testarray /dev/nbd0 missing
After these steps, assuming the SELinux policy doesn't allow the
unexpected access pattern, errors will be visible on the kernel console:
[ 142.204243] nbd0: detected capacity change from 0 to 524288
[ 165.189967] md: async del_gendisk mode will be removed in future, please upgrade to mdadm-4.5+
[ 165.252299] md/raid1:md127: active with 1 out of 2 mirrors
[ 165.252725] md127: detected capacity change from 0 to 522240
[ 165.255434] block nbd0: Send control failed (result -13)
[ 165.255718] block nbd0: Request send failed, requeueing
[ 165.256006] block nbd0: Dead connection, failed to find a fallback
[ 165.256041] block nbd0: Receive control failed (result -32)
[ 165.256423] block nbd0: shutting down sockets
[ 165.257196] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.257736] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.258263] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.259376] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.259920] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.260628] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.261661] ldm_validate_partition_table(): Disk read failed.
[ 165.262108] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.262769] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.263697] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.264412] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.265412] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.265872] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.266378] I/O error, dev nbd0, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.267168] Buffer I/O error on dev md127, logical block 0, async page read
[ 165.267564] md127: unable to read partition table
[ 165.269581] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.269960] Buffer I/O error on dev nbd0, logical block 0, async page read
[ 165.270316] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.270913] Buffer I/O error on dev nbd0, logical block 0, async page read
[ 165.271253] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 165.271809] Buffer I/O error on dev nbd0, logical block 0, async page read
[ 165.272074] ldm_validate_partition_table(): Disk read failed.
[ 165.272360] nbd0: unable to read partition table
[ 165.289004] ldm_validate_partition_table(): Disk read failed.
[ 165.289614] nbd0: unable to read partition table
The corresponding SELinux denial on Fedora/RHEL will look like this
(assuming it's not silenced):
type=AVC msg=audit(1758104872.510:116): avc: denied { write } for pid=1908 comm="mdadm" laddr=::1 lport=32772 faddr=::1 fport=10809 scontext=system_u:system_r:mdadm_t:s0-s0:c0.c1023 tcontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 tclass=tcp_socket permissive=0
The respective backtrace looks like this:
@security[mdadm, -13,
handshake_exit+221615650
handshake_exit+221615650
handshake_exit+221616465
security_socket_sendmsg+5
sock_sendmsg+106
handshake_exit+221616150
sock_sendmsg+5
__sock_xmit+162
nbd_send_cmd+597
nbd_handle_cmd+377
nbd_queue_rq+63
blk_mq_dispatch_rq_list+653
__blk_mq_do_dispatch_sched+184
__blk_mq_sched_dispatch_requests+333
blk_mq_sched_dispatch_requests+38
blk_mq_run_hw_queue+239
blk_mq_dispatch_plug_list+382
blk_mq_flush_plug_list.part.0+55
__blk_flush_plug+241
__submit_bio+353
submit_bio_noacct_nocheck+364
submit_bio_wait+84
__blkdev_direct_IO_simple+232
blkdev_read_iter+162
vfs_read+591
ksys_read+95
do_syscall_64+92
entry_SYSCALL_64_after_hwframe+120
]: 1
The issue has started to appear since commit 060406c61c ("block: add
plug while submitting IO").
Cc: Ming Lei <ming.lei@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2348878
Fixes: 060406c61c ("block: add plug while submitting IO")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block fixes from Jens Axboe:
- Don't include __GFP_NOWARN for loop worker allocation, as it already
uses GFP_NOWAIT which has __GFP_NOWARN set already
- Small series cleaning up the recent bio_iov_iter_get_pages() changes
- loop fix for leaking the backing reference file, if validation fails
- Update of a comment pertaining to disk/partition stat locking
* tag 'block-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
loop: remove redundant __GFP_NOWARN flag
block: move bio_iov_iter_get_bdev_pages to block/fops.c
iomap: open code bio_iov_iter_get_bdev_pages
block: rename bio_iov_iter_get_pages_aligned to bio_iov_iter_get_pages
block: remove bio_iov_iter_get_pages
block: Update a comment of disk statistics
loop: fix backing file reference leak on validation error
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
Pull io_uring updates from Jens Axboe:
- Store ring provided buffers locally for the users, rather than stuff
them into struct io_kiocb.
These types of buffers must always be fully consumed or recycled in
the current context, and leaving them in struct io_kiocb is hence not
a good ideas as that struct has a vastly different life time.
Basically just an architecture cleanup that can help prevent issues
with ring provided buffers in the future.
- Support for mixed CQE sizes in the same ring.
Before this change, a CQ ring either used the default 16b CQEs, or it
was setup with 32b CQE using IORING_SETUP_CQE32. For use cases where
a few 32b CQEs were needed, this caused everything else to use big
CQEs. This is wasteful both in terms of memory usage, but also memory
bandwidth for the posted CQEs.
With IORING_SETUP_CQE_MIXED, applications may use request types that
post both normal 16b and big 32b CQEs on the same ring.
- Add helpers for async data management, to make it harder for opcode
handlers to mess it up.
- Add support for multishot for uring_cmd, which ublk can use. This
helps improve efficiency, by providing a persistent request type that
can trigger multiple CQEs.
- Add initial support for ring feature querying.
We had basic support for probe operations, but the API isn't great.
Rather than expand that, add support for QUERY which is easily
expandable and can cover a lot more cases than the existing probe
support. This will help applications get a better idea of what
operations are supported on a given host.
- zcrx improvements from Pavel:
- Improve refill entry alignment for better caching
- Various cleanups, especially around deduplicating normal
memory vs dmabuf setup.
- Generalisation of the niov size (Patch 12). It's still hard
coded to PAGE_SIZE on init, but will let the user to specify
the rx buffer length on setup.
- Syscall / synchronous bufer return. It'll be used as a slow
fallback path for returning buffers when the refill queue is
full. Useful for tolerating slight queue size misconfiguration
or with inconsistent load.
- Accounting more memory to cgroups.
- Additional independent cleanups that will also be useful for
mutli-area support.
- Various fixes and cleanups
* tag 'for-6.18/io_uring-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring/cmd: drop unused res2 param from io_uring_cmd_done()
io_uring: fix nvme's 32b cqes on mixed cq
io_uring/query: cap number of queries
io_uring/query: prevent infinite loops
io_uring/zcrx: account niov arrays to cgroup
io_uring/zcrx: allow synchronous buffer return
io_uring/zcrx: introduce io_parse_rqe()
io_uring/zcrx: don't adjust free cache space
io_uring/zcrx: use guards for the refill lock
io_uring/zcrx: reduce netmem scope in refill
io_uring/zcrx: protect netdev with pp_lock
io_uring/zcrx: rename dma lock
io_uring/zcrx: make niov size variable
io_uring/zcrx: set sgt for umem area
io_uring/zcrx: remove dmabuf_offset
io_uring/zcrx: deduplicate area mapping
io_uring/zcrx: pass ifq to io_zcrx_alloc_fallback()
io_uring/zcrx: check all niovs filled with dma addresses
io_uring/zcrx: move area reg checks into io_import_area
io_uring/zcrx: don't pass slot to io_zcrx_create_area
...
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Derive 'Zeroable' for all structs and unions generated by 'bindgen'
where possible and corresponding cleanups. To do so, add the
'pin-init' crate as a dependency to 'bindings' and 'uapi'.
It also includes its first use in the 'cpufreq' module, with more
to come in the next cycle.
- Add warning to the 'rustdoc' target to detect broken 'srctree/'
links and fix existing cases.
- Remove support for unused (since v6.16) host '#[test]'s,
simplifying the 'rusttest' target. Tests should generally run
within KUnit.
'kernel' crate:
- Add 'ptr' module with a new 'Alignment' type, which is always a
power of two and is used to validate that a given value is a valid
alignment and to perform masking and alignment operations:
// Checked at build time.
assert_eq!(Alignment:🆕:<16>().as_usize(), 16);
// Checked at runtime.
assert_eq!(Alignment::new_checked(15), None);
assert_eq!(Alignment::of::<u8>().log2(), 0);
assert_eq!(0x25u8.align_down(Alignment:🆕:<0x10>()), 0x20);
assert_eq!(0x5u8.align_up(Alignment:🆕:<0x10>()), Some(0x10));
assert_eq!(u8::MAX.align_up(Alignment:🆕:<0x10>()), None);
It also includes its first use in Nova.
- Add 'core::mem::{align,size}_of{,_val}' to the prelude, matching
Rust 1.80.0.
- Keep going with the steps on our migration to the standard library
'core::ffi::CStr' type (use 'kernel::{fmt, prelude::fmt!}' and use
upstream method names).
- 'error' module: improve 'Error::from_errno' and 'to_result'
documentation, including examples/tests.
- 'sync' module: extend 'aref' submodule documentation now that it
exists, and more updates to complete the ongoing move of 'ARef' and
'AlwaysRefCounted' to 'sync::aref'.
- 'list' module: add an example/test for 'ListLinksSelfPtr' usage.
- 'alloc' module:
- Implement 'Box::pin_slice()', which constructs a pinned slice of
elements.
- Provide information about the minimum alignment guarantees of
'Kmalloc', 'Vmalloc' and 'KVmalloc'.
- Take minimum alignment guarantees of allocators for
'ForeignOwnable' into account.
- Remove the 'allocator_test' (including 'Cmalloc').
- Add doctest for 'Vec::as_slice()'.
- Constify various methods.
- 'time' module:
- Add methods on 'HrTimer' that can only be called with exclusive
access to an unarmed timer, or from timer callback context.
- Add arithmetic operations to 'Instant' and 'Delta'.
- Add a few convenience and access methods to 'HrTimer' and
'Instant'.
'macros' crate:
- Reduce collections in 'quote!' macro.
And a few other cleanups and improvements"
* tag 'rust-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (58 commits)
gpu: nova-core: use Alignment for alignment-related operations
rust: add `Alignment` type
rust: macros: reduce collections in `quote!` macro
rust: acpi: use `core::ffi::CStr` method names
rust: of: use `core::ffi::CStr` method names
rust: net: use `core::ffi::CStr` method names
rust: miscdevice: use `core::ffi::CStr` method names
rust: kunit: use `core::ffi::CStr` method names
rust: firmware: use `core::ffi::CStr` method names
rust: drm: use `core::ffi::CStr` method names
rust: cpufreq: use `core::ffi::CStr` method names
rust: configfs: use `core::ffi::CStr` method names
rust: auxiliary: use `core::ffi::CStr` method names
drm/panic: use `core::ffi::CStr` method names
rust: device: use `kernel::{fmt,prelude::fmt!}`
rust: sync: use `kernel::{fmt,prelude::fmt!}`
rust: seq_file: use `kernel::{fmt,prelude::fmt!}`
rust: kunit: use `kernel::{fmt,prelude::fmt!}`
rust: file: use `kernel::{fmt,prelude::fmt!}`
rust: device: use `kernel::{fmt,prelude::fmt!}`
...
ublk_setup_iod() checks first whether the request is a zoned operation
issued to a device without zoned support and returns BLK_STS_IOERR if
so. However, such a request would already hit the default case in the
subsequent switch statement and fail the ublk_queue_is_zoned() check,
which also results in a return of BLK_STS_IOERR. So remove the redundant
early check for unsupported zone ops.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 79525b51ac ("io_uring: fix nvme's 32b cqes on mixed cq") split
out a separate io_uring_cmd_done32() helper for ->uring_cmd()
implementations that return 32-byte CQEs. The res2 value passed to
io_uring_cmd_done() is now unused because __io_uring_cmd_done() ignores
it when is_cqe32 is passed as false. So drop the parameter from
io_uring_cmd_done() to simplify the callers and clarify that it's not
possible to return an extra value beyond the 32-bit CQE result.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ublk servers with many ublk queues, accessing the ublk_queue in
ublk_unmap_io() is a frequent cache miss. Pass to __ublk_complete_rq()
whether the ublk server's data buffer needs to be copied to the request.
In the callers __ublk_fail_req() and ublk_ch_uring_cmd_local(), get the
flags from the ublk_device instead, as its flags have just been read.
In ublk_put_req_ref(), pass false since all the features that require
reference counting disable copying of the data buffer upon completion.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All callers of __ublk_complete_rq() already know the ublk_io. Pass it in
to avoid looking it up again.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ublk servers with many ublk queues, accessing the ublk_queue in
ublk_need_complete_req() is a frequent cache miss. Get the flags from
the ublk_device instead, which is accessed earlier in
ublk_ch_uring_cmd_local().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ublk servers with many ublk queues, accessing the ublk_queue in
ublk_check_commit_and_fetch() is a frequent cache miss. Get the flags
from the ublk_device instead, which is accessed earlier in
ublk_ch_uring_cmd_local().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_fetch() only uses the ublk_queue to get the ublk_device, which its
caller already has. So just pass the ublk_device directly.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ublk servers with many ublk queues, accessing the ublk_queue in
ublk_config_io_buf() is a frequent cache miss. Get the flags
from the ublk_device instead, which is accessed earlier in
ublk_ch_uring_cmd_local().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Obtain the ublk device flags from ublk_device to avoid needing to access
the ublk_queue, which may be a cache miss.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__ublk_check_and_get_req() only uses its ublk_queue argument to get the
q_id and tag. Pass those arguments explicitly to save an access to the
ublk_queue.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ublk servers with many ublk queues, accessing the ublk_queue in
ublk_daemon_register_io_buf() is a frequent cache miss. Get the flags
from the ublk_device instead, which is accessed earlier in
ublk_ch_uring_cmd_local().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ublk servers with many ublk queues, accessing the ublk_queue in
ublk_register_io_buf() is a frequent cache miss. Get the flags from the
ublk_device instead, which is accessed earlier in
ublk_ch_uring_cmd_local().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid repeating the 2 dereferences to get the ublk_device from the
io_uring_cmd by passing it from ublk_ch_uring_cmd_local() to
ublk_register_io_buf().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ublk servers with many ublk queues, accessing the ublk_queue in
ublk_ch_{read,write}_iter() is a frequent cache miss. Get the flags and
queue depth from the ublk_device instead, which is accessed just before.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ublk servers with many ublk queues, accessing the ublk_queue to
handle a ublk command is a frequent cache miss. Get the queue depth from
the ublk_device instead, which is accessed just before.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce ublk_device analogues of the ublk_queue flag helpers:
- ublk_support_zero_copy() -> ublk_dev_support_user_copy()
- ublk_support_auto_buf_reg() -> ublk_dev_support_auto_buf_reg()
- ublk_support_user_copy() -> ublk_dev_support_user_copy()
- ublk_need_map_io() -> ublk_dev_need_map_io()
- ublk_need_req_ref() -> ublk_dev_need_req_ref()
- ublk_need_get_data() -> ublk_dev_need_get_data()
These will be used in subsequent changes to avoid accessing the
ublk_queue just for the flags, and instead use the ublk_device.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__ublk_fail_req() only uses the ublk_queue to get the ublk_device, which
its caller already has. So just pass the ublk_device directly.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_queue_cmd_buf_size() only needs the queue depth, which is the same
for all queues. Get the queue depth from the ublk_device instead so the
q_id parameter can be dropped.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_get_queue() never returns a NULL pointer, so there's no need to
check its return value in ublk_check_and_get_req(). Drop the check.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block fixes from Jens Axboe:
"A set of fixes for an issue with md array assembly and drbd for
devices supporting write zeros"
* tag 'block-6.17-20250918' of git://git.kernel.dk/linux:
drbd: init queue_limits->max_hw_wzeroes_unmap_sectors parameter
md: init queue_limits->max_hw_wzeroes_unmap_sectors parameter
The parameter max_hw_wzeroes_unmap_sectors in queue_limits should be
equal to max_write_zeroes_sectors if it is set to a non-zero value.
However, when the backend bdev is specified, this parameter is
initialized to UINT_MAX during the call to blk_set_stacking_limits(),
while only max_write_zeroes_sectors is adjusted. Therefore, this
discrepancy triggers a value check failure in blk_validate_limits().
Since the drvd driver doesn't yet support unmap write zeroes, so fix
this failure by explicitly setting max_hw_wzeroes_unmap_sectors to
zero.
Fixes: 0c40d7cb5e ("block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sysfs handlers should be called under ->init_lock and are not supposed to
unlock it until return, otherwise e.g. a concurrent reset() can occur.
There is one handler that breaks that rule: recomp_algorithm_show().
Move ->init_lock handling outside of __comp_algorithm_show() (also drop it
and call zcomp_available_show() directly) so that the entire
recomp_algorithm_show() loop is protected by the lock, as opposed to
protecting individual iterations.
The patch does not need to go to -stable, as it does not fix any
runtime errors (at least I can't think of any). It makes
recomp_algorithm_show() "atomic" w.r.t. zram reset() (just like the
rest of zram sysfs show() handlers), that's a pretty minor change.
Link: https://lkml.kernel.org/r/20250805101946.1774112-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Seyediman Seyedarab <imandevel@gmail.com>
Suggested-by: Seyediman Seyedarab <imandevel@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ublk_mark_io_ready() tracks whether all the ublk_device's I/Os have been
fetched by incrementing ublk_queue's nr_io_ready count and incrementing
ublk_device's nr_queues_ready count if the whole queue is ready.
Simplify the logic by just tracking the total number of fetched I/Os on
each ublk_device. When this count reaches nr_hw_queues * queue_depth,
the ublk_device is ready to receive I/O.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch adds a new WQ_PERCPU flag to explicitly request the use of
the per-CPU behavior. Both flags coexist for one release cycle to allow
callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
queue_work() / queue_delayed_work() / mod_delayed_work() will now use the
new unbound wq: whether the user still use the old wq a warn will be
printed along with a wq redirect to the new one.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
queue_work() / queue_delayed_work() / mod_delayed_work() will now use the
new unbound wq: whether the user still use the old wq a warn will be
printed along with a wq redirect to the new one.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace kmalloc() followed by copy_from_user() with memdup_user() to
improve and simplify raw_cmd_copyin().
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
