nft_queue is always used from userspace nftables to deliver the NF_QUEUE
verdict. Immediately emitting an NF_QUEUE verdict is never used by the
userspace nft tools, so reject immediate NF_QUEUE verdicts.
The arp family does not provide queue support, but such an immediate
verdict is still reachable. Globally reject NF_QUEUE immediate verdicts
to address this issue.
Fixes: f342de4e2f ("netfilter: nf_tables: reject QUEUE/DROP verdict parameters")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Weiming Shi says:
xt_match and xt_target structs registered with NFPROTO_UNSPEC can be
loaded by any protocol family through nft_compat. When such a
match/target sets .hooks to restrict which hooks it may run on, the
bitmask uses NF_INET_* constants. This is only correct for families
whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge
all share the same five hooks (PRE_ROUTING ... POST_ROUTING).
ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different
semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks
validation silently passes for the wrong reasons, allowing matches to
run on ARP chains where the hook assumptions (e.g. state->in being
set on input hooks) do not hold. This leads to NULL pointer
dereferences; xt_devgroup is one concrete example:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
RIP: 0010:devgroup_mt+0xff/0x350
Call Trace:
<TASK>
nft_match_eval (net/netfilter/nft_compat.c:407)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61)
nf_hook_slow (net/netfilter/core.c:623)
arp_xmit (net/ipv4/arp.c:666)
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Fix it by restricting arptables to NFPROTO_ARP extensions only.
Note that arptables-legacy only supports:
- arpt_CLASSIFY
- arpt_mangle
- arpt_MARK
that provide explicit NFPROTO_ARP match/target declarations.
Fixes: 9291747f11 ("netfilter: xtables: add device group match")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
mtype_del() counts empty slots below n->pos in k, but it only drops the
bucket when both n->pos and k are zero. This misses buckets whose live
entries have all been removed while n->pos still points past deleted slots.
Treat a bucket as empty when all positions below n->pos are unused and
release it directly instead of shrinking it further.
Fixes: 8af1c6fbd9 ("netfilter: ipset: Fix forceadd evaluation path")
Cc: stable@vger.kernel.org
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <dstsmallbird@foxmail.com>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use the existing master conntrack helper, anything else is not really
supported and it just makes validation more complicated, so just ignore
what helper userspace suggests for this expectation.
This was uncovered when validating CTA_EXPECT_CLASS via different helper
provided by userspace than the existing master conntrack helper:
BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0
Read of size 4 at addr ffff8880043fe408 by task poc/102
Call Trace:
nf_ct_expect_related_report+0x2479/0x27c0
ctnetlink_create_expect+0x22b/0x3b0
ctnetlink_new_expect+0x4bd/0x5c0
nfnetlink_rcv_msg+0x67a/0x950
netlink_rcv_skb+0x120/0x350
Allowing to read kernel memory bytes off the expectation boundary.
CTA_EXPECT_HELP_NAME is still used to offer the helper name to userspace
via netlink dump.
Fixes: bd07793705 ("netfilter: nfnetlink_queue: allow to attach expectations to conntracks")
Reported-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ctnetlink_alloc_expect() allocates expectations from a non-zeroing
slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not
present in the netlink message, saved_addr and saved_proto are
never initialized. Stale data from a previous slab occupant can
then be dumped to userspace by ctnetlink_exp_dump_expect(), which
checks these fields to decide whether to emit CTA_EXPECT_NAT.
The safe sibling nf_ct_expect_init(), used by the packet path,
explicitly zeroes these fields.
Zero saved_addr, saved_proto and dir in the else branch, guarded
by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when
NAT is enabled.
Confirmed by priming the expect slab with NAT-bearing expectations,
freeing them, creating a new expectation without CTA_EXPECT_NAT,
and observing that the ctnetlink dump emits a spurious
CTA_EXPECT_NAT containing stale data from the prior allocation.
Fixes: 076a0ca026 ("netfilter: ctnetlink: add NAT support for expectations")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()
to remove expectations belonging to the helper being unregistered.
However, it passes NULL instead of the helper pointer as the data
argument, so expect_iter_me() never matches any expectation and all
of them survive the cleanup.
After unregister returns, nfnl_cthelper_del() frees the helper
object immediately. Subsequent expectation dumps or packet-driven
init_conntrack() calls then dereference the freed exp->helper,
causing a use-after-free.
Pass the actual helper pointer so expectations referencing it are
properly destroyed before the helper object is freed.
BUG: KASAN: slab-use-after-free in string+0x38f/0x430
Read of size 1 at addr ffff888003b14d20 by task poc/103
Call Trace:
string+0x38f/0x430
vsnprintf+0x3cc/0x1170
seq_printf+0x17a/0x240
exp_seq_show+0x2e5/0x560
seq_read_iter+0x419/0x1280
proc_reg_read+0x1ac/0x270
vfs_read+0x179/0x930
ksys_read+0xef/0x1c0
Freed by task 103:
The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888003b14d00, ffff888003b14dc0)
Fixes: ac7b848390 ("netfilter: expect: add and use nf_ct_expect_iterate helpers")
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
IPSET_ATTR_NAME and IPSET_ATTR_NAMEREF are of NLA_STRING type, they
cannot be treated like a c-string.
They either have to be switched to NLA_NUL_STRING, or the compare
operations need to use the nla functions.
Fixes: f830837f0e ("netfilter: ipset: list:set set type support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reject names that lack a \0 character before feeding them
to functions that expect c-strings.
Fixes tag is the most recent commit that needs this change.
Fixes: c38c4597e4 ("netfilter: implement xt_cgroup cgroup2 path match")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is a followup to an old bug fix: NLMSG_DONE needs to account
for the netlink header size, not just the attribute size.
This can result in a WARN splat + drop of the netlink message,
but other than this there are no ill effects.
Fixes: 9dfa1dfe4d ("netfilter: nf_log: account for size of NLMSG_DONE attribute")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups.
Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Replace manual range and mask validations with netlink policy
annotations in ctnetlink code paths, so that the netlink core rejects
invalid values early and can generate extack errors.
- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at
policy level, removing the manual >= TCP_CONNTRACK_MAX check.
- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE
(14). The normal TCP option parsing path already clamps to this value,
but the ctnetlink path accepted 0-255, causing undefined behavior when
used as a u32 shift count.
- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with
CTA_FILTER_F_ALL, removing the manual mask checks.
- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding
a new mask define grouping all valid expect flags.
Extracted from a broader nf-next patch by Florian Westphal, scoped to
ctnetlink for the fixes tree.
Fixes: c8e2078cfe ("[NETFILTER]: ctnetlink: add support for internal tcp connection tracking flags handling")
Signed-off-by: David Carlier <devnexen@gmail.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
process_sdp() declares union nf_inet_addr rtp_addr on the stack and
passes it to the nf_nat_sip sdp_session hook after walking the SDP
media descriptions. However rtp_addr is only initialized inside the
media loop when a recognized media type with a non-zero port is found.
If the SDP body contains no m= lines, only inactive media sections
(m=audio 0 ...) or only unrecognized media types, rtp_addr is never
assigned. Despite that, the function still calls hooks->sdp_session()
with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack
value as an IP address and rewrite the SDP session owner and connection
lines with it.
With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this
results in the session-level o= and c= addresses being rewritten to
0.0.0.0 for inactive SDP sessions. Without stack auto-init the
rewritten address is whatever happened to be on the stack.
Fix this by pre-initializing rtp_addr from the session-level connection
address (caddr) when available, and tracking via a have_rtp_addr flag
whether any valid address was established. Skip the sdp_session hook
entirely when no valid address exists.
Fixes: 4ab9e64e5e ("[NETFILTER]: nf_nat_sip: split up SDP mangling")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Skip expectations that do not reside in this netns.
Similar to e77e6ff502 ("netfilter: conntrack: do not dump other netns's
conntrack entries via proc").
Fixes: 9b03f38d04 ("netfilter: netns nf_conntrack: per-netns expectations")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
__nf_ct_expect_find() and nf_ct_expect_find_get() are called under
rcu_read_lock() but they dereference the master conntrack via
exp->master.
Since the expectation does not hold a reference on the master conntrack,
this could be dying conntrack or different recycled conntrack than the
real master due to SLAB_TYPESAFE_RCU.
Store the netns, the master_tuple and the zone in struct
nf_conntrack_expect as a safety measure.
This patch is required by the follow up fix not to dump expectations
that do not belong to this netns.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Holding reference on the expectation is not sufficient, the master
conntrack object can just go away, making exp->master invalid.
To access exp->master safely:
- Grab the nf_conntrack_expect_lock, this gets serialized with
clean_from_lists() which also holds this lock when the master
conntrack goes away.
- Hold reference on master conntrack via nf_conntrack_find_get().
Not so easy since the master tuple to look up for the master conntrack
is not available in the existing problematic paths.
This patch goes for extending the nf_conntrack_expect_lock section
to address this issue for simplicity, in the cases that are described
below this is just slightly extending the lock section.
The add expectation command already holds a reference to the master
conntrack from ctnetlink_create_expect().
However, the delete expectation command needs to grab the spinlock
before looking up for the expectation. Expand the existing spinlock
section to address this to cover the expectation lookup. Note that,
the nf_ct_expect_iterate_net() calls already grabs the spinlock while
iterating over the expectation table, which is correct.
The get expectation command needs to grab the spinlock to ensure master
conntrack does not go away. This also expands the existing spinlock
section to cover the expectation lookup too. I needed to move the
netlink skb allocation out of the spinlock to keep it GFP_KERNEL.
For the expectation events, the IPEXP_DESTROY event is already delivered
under the spinlock, just move the delivery of IPEXP_NEW under the
spinlock too because the master conntrack event cache is reached through
exp->master.
While at it, add lockdep notations to help identify what codepaths need
to grab the spinlock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use expect->helper in ctnetlink and /proc to dump the helper name.
Using nfct_help() without holding a reference to the master conntrack
is unsafe.
Use exp->master->helper in ctnetlink path if userspace does not provide
an explicit helper when creating an expectation to retain the existing
behaviour. The ctnetlink expectation path holds the reference on the
master conntrack and nf_conntrack_expect lock and the nfnetlink glue
path refers to the master ct that is attached to the skb.
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The expectation helper field is mostly unused. As a result, the
netfilter codebase relies on accessing the helper through exp->master.
Always set on the expectation helper field so it can be used to reach
the helper.
nf_ct_expect_init() is called from packet path where the skb owns
the ct object, therefore accessing exp->master for the newly created
expectation is safe. This saves a lot of updates in all callsites
to pass the ct object as parameter to nf_ct_expect_init().
This is a preparation patches for follow up fixes.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Chris Arges reports high memory consumption with thousands of
containers, this patch revisits the array allocation logic.
For anonymous sets, start by 16 slots (which takes 256 bytes on x86_64).
Expand it by x2 until threshold of 512 slots is reached, over that
threshold, expand it by x1.5.
For non-anonymous set, start by 1024 slots in the array (which takes 16
Kbytes initially on x86_64). Expand it by x1.5.
Use set->ndeact to subtract deactivated elements when calculating the
number of the slots in the array, otherwise the array size array gets
increased artifically. Add special case shrink logic to deal with flush
set too.
The shrink logic is skipped by anonymous sets.
Use check_add_overflow() to calculate the new array size.
Add a WARN_ON_ONCE check to make sure elements fit into the new array
size.
Reported-by: Chris Arges <carges@cloudflare.com>
Fixes: 7e43e0a114 ("netfilter: nft_set_rbtree: translate rbtree to array for binary search")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
__build_packet_message() manually constructs the NFULA_PAYLOAD netlink
attribute using skb_put() and skb_copy_bits(), bypassing the standard
nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes
are allocated (including NLA alignment padding), only data_len bytes
of actual packet data are copied. The trailing nla_padlen(data_len)
bytes (1-3 when data_len is not 4-byte aligned) are never initialized,
leaking stale heap contents to userspace via the NFLOG netlink socket.
Replace the manual attribute construction with nla_reserve(), which
handles the tailroom check, header setup, and padding zeroing via
__nla_reserve(). The subsequent skb_copy_bits() fills in the payload
data on top of the properly initialized attribute.
Fixes: df6fb868d6 ("[NETFILTER]: nfnetlink: convert to generic netlink attribute functions")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
New test case fails unexpectedly when avx2 matching functions are used.
The test first loads a ranomly generated pipapo set
with 'ipv4 . port' key, i.e. nft -f foo.
This works. Then, it reloads the set after a flush:
(echo flush set t s; cat foo) | nft -f -
This is expected to work, because its the same set after all and it was
already loaded once.
But with avx2, this fails: nft reports a clashing element.
The reported clash is of following form:
We successfully re-inserted
a . b
c . d
Then we try to insert a . d
avx2 finds the already existing a . d, which (due to 'flush set') is marked
as invalid in the new generation. It skips the element and moves to next.
Due to incorrect masking, the skip-step finds the next matching
element *only considering the first field*,
i.e. we return the already reinserted "a . b", even though the
last field is different and the entry should not have been matched.
No such error is reported for the generic c implementation (no avx2) or when
the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback.
Bisection points to
7711f4bb4b ("netfilter: nft_set_pipapo: fix range overlap detection")
but that fix merely uncovers this bug.
Before this commit, the wrong element is returned, but erronously
reported as a full, identical duplicate.
The root-cause is too early return in the avx2 match functions.
When we process the last field, we should continue to process data
until the entire input size has been consumed to make sure no stale
bits remain in the map.
Link: https://lore.kernel.org/netfilter-devel/20260321152506.037f68c0@elisabeth/
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path.
Fixes: 11eeef41d5 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Call synchronize_rcu() after unregistering the hooks from error path,
since a hook that already refers to this flowtable can be already
registered, exposing this flowtable to packet path and nfnetlink_hook
control plane.
This error path is rare, it should only happen by reaching the maximum
number hooks or by failing to set up to hardware offload, just call
synchronize_rcu().
There is a check for already used device hooks by different flowtable
that could result in EEXIST at this late stage. The hook parser can be
updated to perform this check earlier to this error path really becomes
rarely exercised.
Uncovered by KASAN reported as use-after-free from nfnetlink_hook path
when dumping hooks.
Fixes: 3b49e2e94e ("netfilter: nf_tables: add flow table netlink frontend")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Yiming Qian reports UaF when concurrent process is dumping hooks via
nfnetlink_hooks:
BUG: KASAN: slab-use-after-free in nfnl_hook_dump_one.isra.0+0xe71/0x10f0
Read of size 8 at addr ffff888003edbf88 by task poc/79
Call Trace:
<TASK>
nfnl_hook_dump_one.isra.0+0xe71/0x10f0
netlink_dump+0x554/0x12b0
nfnl_hook_get+0x176/0x230
[..]
Defer release until after concurrent readers have completed.
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Fixes: 84601d6ee6 ("bpf: add bpf_link support for BPF_NETFILTER programs")
Signed-off-by: Florian Westphal <fw@strlen.de>
In DecodeQ931(), the UserUserIE code path reads a 16-bit length from
the packet, then decrements it by 1 to skip the protocol discriminator
byte before passing it to DecodeH323_UserInformation(). If the encoded
length is 0, the decrement wraps to -1, which is then passed as a
large value to the decoder, leading to an out-of-bounds read.
Add a check to ensure len is positive after the decrement.
Fixes: 5e35941d99 ("[NETFILTER]: Add H.323 conntrack/NAT helper")
Reported-by: Klaudia Kloc <klaudia@vidocsecurity.com>
Reported-by: Dawid Moczadło <dawid@vidocsecurity.com>
Tested-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
The monthday field can be up to 31, and shifting a signed integer 1
by 31 positions (1 << 31) is undefined behavior in C, as the result
overflows a 32-bit signed int. Use 1U to ensure well-defined behavior
for all valid monthday values.
Change the weekday shift to 1U as well for consistency.
Fixes: ee4411a1b1 ("[NETFILTER]: x_tables: add xt_time match")
Reported-by: Klaudia Kloc <klaudia@vidocsecurity.com>
Reported-by: Dawid Moczadło <dawid@vidocsecurity.com>
Tested-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Templates refer to objects that can go away while packets are sitting in
nfqueue refer to:
- helper, this can be an issue on module removal.
- timeout policy, nfnetlink_cttimeout might remove it.
The use of templates with zone and event cache filter are safe, since
this just copies values.
Flush these enqueued packets in case the template rule gets removed.
Fixes: 24de58f465 ("netfilter: xt_CT: allow to attach timeout policy + glue code")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Packets sitting in nfqueue might hold a reference to:
- templates that specify the conntrack zone, because a percpu area is
used and module removal is possible.
- conntrack timeout policies and helper, where object removal leave
a stale reference.
Since these objects can just go away, drop enqueued packets to avoid
stale reference to them.
If there is a need for finer grain removal, this logic can be revisited
to make selective packet drop upon dependencies.
Fixes: 7e0b2b57f0 ("netfilter: nft_ct: add ct timeout support")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
If cloning the second stateful expression in the element via GFP_ATOMIC
fails, then the first stateful expression remains in place without being
released.
unreferenced object (percpu) 0x607b97e9cab8 (size 16):
comm "softirq", pid 0, jiffies 4294931867
hex dump (first 16 bytes on cpu 3):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
backtrace (crc 0):
pcpu_alloc_noprof+0x453/0xd80
nft_counter_clone+0x9c/0x190 [nf_tables]
nft_expr_clone+0x8f/0x1b0 [nf_tables]
nft_dynset_new+0x2cb/0x5f0 [nf_tables]
nft_rhash_update+0x236/0x11c0 [nf_tables]
nft_dynset_eval+0x11f/0x670 [nf_tables]
nft_do_chain+0x253/0x1700 [nf_tables]
nft_do_chain_ipv4+0x18d/0x270 [nf_tables]
nf_hook_slow+0xaa/0x1e0
ip_local_deliver+0x209/0x330
Fixes: 563125a73a ("netfilter: nftables: generalize set extension to support for several expressions")
Reported-by: Gurpreet Shergill <giki.shergill@proton.me>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
In decode_int(), the CONS case calls get_bits(bs, 2) to read a length
value, then calls get_uint(bs, len) without checking that len bytes
remain in the buffer. The existing boundary check only validates the
2 bits for get_bits(), not the subsequent 1-4 bytes that get_uint()
reads. This allows a malformed H.323/RAS packet to cause a 1-4 byte
slab-out-of-bounds read.
Add a boundary check for len bytes after get_bits() and before
get_uint().
Fixes: 5e35941d99 ("[NETFILTER]: Add H.323 conntrack/NAT helper")
Reported-by: Klaudia Kloc <klaudia@vidocsecurity.com>
Reported-by: Dawid Moczadło <dawid@vidocsecurity.com>
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
With double vlan tagged packets in the fastpath, getting the error:
skb_vlan_push got skb with skb->data not at mac header (offset 18)
Call skb_reset_mac_header() before calling skb_vlan_push().
Fixes: c653d5a78f ("netfilter: flowtable: inline vlan encapsulation in xmit path")
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
This reverts commit 648946966a ("netfilter: nft_set_rbtree: validate
open interval overlap").
There have been reports of nft failing to laod valid rulesets after this
patch was merged into -stable.
I can reproduce several such problem with recent nft versions, including
nft 1.1.6 which is widely shipped by distributions.
We currently have little choice here.
This commit can be resurrected at some point once the nftables fix that
triggers the false overlap positive has appeared in common distros
(see e83e32c8d1cd ("mnl: restore create element command with large batches" in
nftables.git).
Fixes: 648946966a ("netfilter: nft_set_rbtree: validate open interval overlap")
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
sip_help_tcp() parses the SIP Content-Length header with
simple_strtoul(), which returns unsigned long, but stores the result in
unsigned int clen. On 64-bit systems, values exceeding UINT_MAX are
silently truncated before computing the SIP message boundary.
For example, Content-Length 4294967328 (2^32 + 32) is truncated to 32,
causing the parser to miscalculate where the current message ends. The
loop then treats trailing data in the TCP segment as a second SIP
message and processes it through the SDP parser.
Fix this by changing clen to unsigned long to match the return type of
simple_strtoul(), and reject Content-Length values that exceed the
remaining TCP payload length.
Fixes: f5b321bd37 ("netfilter: nf_conntrack_sip: add TCP support")
Signed-off-by: Lukas Johannes Möller <research@johannes-moeller.dev>
Signed-off-by: Florian Westphal <fw@strlen.de>
Hyunwoo Kim reports out-of-bounds access in sctp and ctnetlink.
These attributes are used by the kernel without any validation.
Extend the netlink policies accordingly.
Quoting the reporter:
nlattr_to_sctp() assigns the user-supplied CTA_PROTOINFO_SCTP_STATE
value directly to ct->proto.sctp.state without checking that it is
within the valid range. [..]
and: ... with exp->dir = 100, the access at
ct->master->tuplehash[100] reads 5600 bytes past the start of a
320-byte nf_conn object, causing a slab-out-of-bounds read confirmed by
UBSAN.
Fixes: 076a0ca026 ("netfilter: ctnetlink: add NAT support for expectations")
Fixes: a258860e01 ("netfilter: ctnetlink: add full support for SCTP to ctnetlink")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
ctnetlink_dump_exp_ct() stores a conntrack pointer in cb->data for the
netlink dump callback ctnetlink_exp_ct_dump_table(), but drops the
conntrack reference immediately after netlink_dump_start(). When the
dump spans multiple rounds, the second recvmsg() triggers the dump
callback which dereferences the now-freed conntrack via nfct_help(ct),
leading to a use-after-free on ct->ext.
The bug is that the netlink_dump_control has no .start or .done
callbacks to manage the conntrack reference across dump rounds. Other
dump functions in the same file (e.g. ctnetlink_get_conntrack) properly
use .start/.done callbacks for this purpose.
Fix this by adding .start and .done callbacks that hold and release the
conntrack reference for the duration of the dump, and move the
nfct_help() call after the cb->args[0] early-return check in the dump
callback to avoid dereferencing ct->ext unnecessarily.
BUG: KASAN: slab-use-after-free in ctnetlink_exp_ct_dump_table+0x4f/0x2e0
Read of size 8 at addr ffff88810597ebf0 by task ctnetlink_poc/133
CPU: 1 UID: 0 PID: 133 Comm: ctnetlink_poc Not tainted 7.0.0-rc2+ #3 PREEMPTLAZY
Call Trace:
<TASK>
ctnetlink_exp_ct_dump_table+0x4f/0x2e0
netlink_dump+0x333/0x880
netlink_recvmsg+0x3e2/0x4b0
? aa_sk_perm+0x184/0x450
sock_recvmsg+0xde/0xf0
Allocated by task 133:
kmem_cache_alloc_noprof+0x134/0x440
__nf_conntrack_alloc+0xa8/0x2b0
ctnetlink_create_conntrack+0xa1/0x900
ctnetlink_new_conntrack+0x3cf/0x7d0
nfnetlink_rcv_msg+0x48e/0x510
netlink_rcv_skb+0xc9/0x1f0
nfnetlink_rcv+0xdb/0x220
netlink_unicast+0x3ec/0x590
netlink_sendmsg+0x397/0x690
__sys_sendmsg+0xf4/0x180
Freed by task 0:
slab_free_after_rcu_debug+0xad/0x1e0
rcu_core+0x5c3/0x9c0
Fixes: e844a92843 ("netfilter: ctnetlink: allow to dump expectation per master conntrack")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
IDLETIMER revision 0 rules reuse existing timers by label and always call
mod_timer() on timer->timer.
If the label was created first by revision 1 with XT_IDLETIMER_ALARM,
the object uses alarm timer semantics and timer->timer is never initialized.
Reusing that object from revision 0 causes mod_timer() on an uninitialized
timer_list, triggering debugobjects warnings and possible panic when
panic_on_warn=1.
Fix this by rejecting revision 0 rule insertion when an existing timer with
the same label is of ALARM type.
Fixes: 68983a354a ("netfilter: xtables: Add snapshot of hardidletimer target")
Co-developed-by: Yifan Wu <yifanwucs@gmail.com>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Co-developed-by: Juefei Pu <tomapufckgml@gmail.com>
Signed-off-by: Juefei Pu <tomapufckgml@gmail.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Xin Liu <dstsmallbird@foxmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label
inside the for loop body. When the "last" helper saved in cb->args[1]
is deleted between dump rounds, every entry fails the (cur != last)
check, so cb->args[1] is never cleared. The for loop finishes with
cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back
into the loop body bypassing the bounds check, causing an 8-byte
out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize].
The 'goto restart' block was meant to re-traverse the current bucket
when "last" is no longer found, but it was placed after the for loop
instead of inside it. Move the block into the for loop body so that
the restart only occurs while cb->args[0] is still within bounds.
BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0
Read of size 8 at addr ffff888104ca3000 by task poc_cthelper/131
Call Trace:
nfnl_cthelper_dump_table+0x9f/0x1b0
netlink_dump+0x333/0x880
netlink_recvmsg+0x3e2/0x4b0
sock_recvmsg+0xde/0xf0
__sys_recvfrom+0x150/0x200
__x64_sys_recvfrom+0x76/0x90
do_syscall_64+0xc3/0x6e0
Allocated by task 1:
__kvmalloc_node_noprof+0x21b/0x700
nf_ct_alloc_hashtable+0x65/0xd0
nf_conntrack_helper_init+0x21/0x60
nf_conntrack_init_start+0x18d/0x300
nf_conntrack_standalone_init+0x12/0xc0
Fixes: 12f7a50533 ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
nfqnl_recv_verdict() calls find_dequeue_entry() to remove the queue
entry from the queue data structures, taking ownership of the entry.
For PF_BRIDGE packets, it then calls nfqa_parse_bridge() to parse VLAN
attributes. If nfqa_parse_bridge() returns an error (e.g. NFQA_VLAN
present but NFQA_VLAN_TCI missing), the function returns immediately
without freeing the dequeued entry or its sk_buff.
This leaks the nf_queue_entry, its associated sk_buff, and all held
references (net_device refcounts, struct net refcount). Repeated
triggering exhausts kernel memory.
Fix this by dropping the entry via nfqnl_reinject() with NF_DROP verdict
on the error path, consistent with other error handling in this file.
Fixes: 8d45ff22f1 ("netfilter: bridge: nf queue verdict to use NFQA_VLAN and NFQA_L2HDR")
Reviewed-by: David Dull <monderasdor@gmail.com>
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
When the last byte of options is a non-single-byte option kind, walkers
that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end
of the option area.
Add an explicit i == optlen - 1 check before dereferencing op[i + 1]
in xt_tcpudp and xt_dccp option walkers.
Fixes: 2e4e6a17af ("[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables")
Signed-off-by: David Dull <monderasdor@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
pipapo_drop() passes rulemap[i + 1].n to pipapo_unmap() as the
to_offset argument on every iteration, including the last one where
i == m->field_count - 1. This reads one element past the end of the
stack-allocated rulemap array (declared as rulemap[NFT_PIPAPO_MAX_FIELDS]
with NFT_PIPAPO_MAX_FIELDS == 16).
Although pipapo_unmap() returns early when is_last is true without
using the to_offset value, the argument is evaluated at the call site
before the function body executes, making this a genuine out-of-bounds
stack read confirmed by KASAN:
BUG: KASAN: stack-out-of-bounds in pipapo_drop+0x50c/0x57c [nf_tables]
Read of size 4 at addr ffff8000810e71a4
This frame has 1 object:
[32, 160) 'rulemap'
The buggy address is at offset 164 -- exactly 4 bytes past the end
of the rulemap array.
Pass 0 instead of rulemap[i + 1].n on the last iteration to avoid
the out-of-bounds read.
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
During transaction processing we might have more than one catchall element:
1 live catchall element and 1 pending element that is coming as part of the
new batch.
If the map holding the catchall elements is also going away, its
required to toggle all catchall elements and not just the first viable
candidate.
Otherwise, we get:
WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404
RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables]
[..]
__nft_set_elem_destroy+0x106/0x380 [nf_tables]
nf_tables_abort_release+0x348/0x8d0 [nf_tables]
nf_tables_abort+0xcf2/0x3ac0 [nf_tables]
nfnetlink_rcv_batch+0x9c9/0x20e0 [..]
Fixes: 628bd3e49c ("netfilter: nf_tables: drop map element references from preparation phase")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a7552 ("netfilter: nft_set_rbtree: don't gc elements on insert").
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Syzbot with fault injection triggered a failing memory allocation with
GFP_KERNEL which results in a WARN splat:
iter.err
WARNING: net/netfilter/nf_tables_api.c:845 at nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845, CPU#0: syz.0.17/5992
Modules linked in:
CPU: 0 UID: 0 PID: 5992 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
RIP: 0010:nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845
Code: 8b 05 86 5a 4e 09 48 3b 84 24 a0 00 00 00 75 62 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc e8 63 6d fa f7 90 <0f> 0b 90 43
+80 7c 35 00 00 0f 85 23 fe ff ff e9 26 fe ff ff 89 d9
RSP: 0018:ffffc900045af780 EFLAGS: 00010293
RAX: ffffffff89ca45bd RBX: 00000000fffffff4 RCX: ffff888028111e40
RDX: 0000000000000000 RSI: 00000000fffffff4 RDI: 0000000000000000
RBP: ffffc900045af870 R08: 0000000000400dc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff1d141db R12: ffffc900045af7e0
R13: 1ffff920008b5f24 R14: dffffc0000000000 R15: ffffc900045af920
FS: 000055557a6a5500(0000) GS:ffff888125496000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb5ea271fc0 CR3: 000000003269e000 CR4: 00000000003526f0
Call Trace:
<TASK>
__nft_release_table+0xceb/0x11f0 net/netfilter/nf_tables_api.c:12115
nft_rcv_nl_event+0xc25/0xdb0 net/netfilter/nf_tables_api.c:12187
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
blocking_notifier_call_chain+0x6a/0x90 kernel/notifier.c:380
netlink_release+0x123b/0x1ad0 net/netlink/af_netlink.c:761
__sock_release net/socket.c:662 [inline]
sock_close+0xc3/0x240 net/socket.c:1455
Restrict set clone to the flush set command in the preparation phase.
Add NFT_ITER_UPDATE_CLONE and use it for this purpose, update the rbtree
and pipapo backends to only clone the set when this iteration type is
used.
As for the existing NFT_ITER_UPDATE type, update the pipapo backend to
use the existing set clone if available, otherwise use the existing set
representation. After this update, there is no need to clone a set that
is being deleted, this includes bound anonymous set.
An alternative approach to NFT_ITER_UPDATE_CLONE is to add a .clone
interface and call it from the flush set path.
Reported-by: syzbot+4924a0edc148e8b4b342@syzkaller.appspotmail.com
Fixes: 3f1d886cc7 ("netfilter: nft_set_pipapo: move cloning of match info to insert/removal path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
In case that the set is full, a new element gets published then removed
without waiting for the RCU grace period, while RCU reader can be
walking over it already.
To address this issue, add the element transaction even if set is full,
but toggle the set_full flag to report -ENFILE so the abort path safely
unwinds the set to its previous state.
As for element updates, decrement set->nelems to restore it.
A simpler fix is to call synchronize_rcu() in the error path.
However, with a large batch adding elements to already maxed-out set,
this could cause noticeable slowdown of such batches.
Fixes: 35d0ac9070 ("netfilter: nf_tables: fix set->nelems counting with no NLM_F_EXCL")
Reported-by: Inseo An <y0un9sa@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),
which is false. The subsequent get_len() call then dereferences
*bs->cur++, reading 1 byte past the end of the buffer. If that byte
has bit 7 set, get_len() reads a second byte as well.
This can be triggered remotely by sending a crafted Q.931 SETUP message
with a User-User Information Element containing exactly 2 bytes of
PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with
the nf_conntrack_h323 helper active. The decoder fully consumes the
PER buffer before reaching this code path, resulting in a 1-2 byte
heap-buffer-overflow read confirmed by AddressSanitizer.
Fix this by checking for 2 bytes (the maximum that get_len() may read)
instead of the uninitialized `len`. This matches the pattern used at
every other get_len() call site in the same file, where the caller
checks for 2 bytes of available data before calling get_len().
Fixes: ec8a8f3c31 ("netfilter: nf_ct_h323: Extend nf_h323_error_boundary to work on bits as well")
Signed-off-by: Vahagn Vardanian <vahagn@redrays.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260225130619.1248-2-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
