Soft-reset is the procedure where we reset only the compute/DMA engines
of the device, without requiring the current user-space process to
release the device.
This type of reset can happen if TDR event occurred (a workload got
stuck) or by a root request through sysfs.
This is only relevant for inference ASICs, as there is no real-world
use-case to do that in training, because training runs on multiple
devices.
In addition, we also do (in certain ASICs) a reset upon device release.
That reset uses the same code as the soft-reset.
Therefore, to better differentiate between the two resets, it is better
to rename the soft-reset support as "inference soft-reset", to make
the code more self-explanatory.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The translation in debugfs of device memory MMU virtual addresses was
wrong as it did not take into consideration the fact that the page
sizes there can be not power of 2.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to avoid user target value wraparound, we modify the
current interface so user will be able to wait for an 8-byte
target value rather than a 4-byte value.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
During TDR handling, we check multiple times if CS is valid.
No need to perform this check as CS must be valid at all time
during the TDR handling.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add support to retrieve following power info via HWMON:
- instantaneous power value
- highest value since last reset
- reset the highest place holder
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Instead of having dedicated function per message that we want to send
to the firmware in COMMS protocol, have a generic function that we can
call to from other parts of the driver
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Instead of using the Linux kernel HWMON enums definition when
communicating with the firmware, use proprietary HWMON based enums
i.e. map hwmon.h header enum to cpucp_if.h based enum while.
This is needed because the HWMON enums are not forcing backward
compatibility and therefore changes can break compatibility between
newer driver and older firmware.
The driver will check for CPU_BOOT_DEV_STS0_MAP_HWMON_EN bit to
validate if f/w supports cpucp->hwmon enum mapping to support older
firmware where this mapping won't be available.
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Command submission timeout is currently determined during driver
loading time. As some environments requires this timeout to be
modified in runtime, we introduce a new debugfs node that controls
the timeout value without the need to reload the driver.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The newly added SPI device ID table does not work because the
entry is incorrectly copied from the OF device table.
During build testing, this shows as a compile failure when building
it as a loadable module:
drivers/misc/eeprom/eeprom_93xx46.c:424:1: error: redefinition of '__mod_of__eeprom_93xx46_of_table_device_table'
MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
Change the entry to refer to the correct symbol.
Fixes: 137879f7ff ("eeprom: 93xx46: Add SPI device ID table")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211014153730.3821376-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210922184048.34770-1-broonie@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210923172453.4921-1-broonie@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MFD_CORE depends on HAS_IOMEM so anything that selects MFD_CORE should
also depend on HAS_IOMEM since 'select' does not check any dependencies
of the symbol that is being selected.
Prevents this kconfig warning:
WARNING: unmet direct dependencies detected for MFD_CORE
Depends on [n]: HAS_IOMEM [=n]
Selected by [m]:
- HI6421V600_IRQ [=m] && OF [=y] && SPMI [=m]
Fixes: bb3b6552a5 ("staging: hikey9xx: split hi6421v600 irq into a separate driver")
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20211004001641.23180-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fastrpc driver is using find_vma() without any protection, as a
result we see below warning due to recent patch 5b78ed24e8
("mm/pagemap: add mmap_assert_locked() annotations to find_vma*()")
which added mmap_assert_locked() in find_vma() function.
This bug went un-noticed in previous versions. Fix this issue by adding
required protection while calling find_vma().
CPU: 0 PID: 209746 Comm: benchmark_model Not tainted 5.15.0-rc2-00445-ge14fe2bf817a-dirty #969
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : find_vma+0x64/0xd0
lr : find_vma+0x60/0xd0
sp : ffff8000158ebc40
...
Call trace:
find_vma+0x64/0xd0
fastrpc_internal_invoke+0x570/0xda8
fastrpc_device_ioctl+0x3e0/0x928
__arm64_sys_ioctl+0xac/0xf0
invoke_syscall+0x44/0x100
el0_svc_common.constprop.3+0x70/0xf8
do_el0_svc+0x24/0x88
el0_svc+0x3c/0x138
el0t_64_sync_handler+0x90/0xb8
el0t_64_sync+0x180/0x184
Fixes: 80f3afd72b ("misc: fastrpc: consider address offset before sending to DSP")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210922154326.8927-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clang-14 complains about an unusual way of converting a pointer to
an integer:
drivers/misc/cb710/sgbuf2.c:50:15: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction]
return ((ptr - NULL) & 3) != 0;
Replace this with a normal cast to uintptr_t.
Fixes: 5f5bac8272 ("mmc: Driver for CB710/720 memory card reader (MMC part)")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210927121408.939246-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI ID table entry
for the device name part of the compatible - currently only the full
compatible is listed which isn't very idiomatic and won't match the
modalias that is generated.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Cc: stable <stable@vger.kernel.org>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210923194609.52647-1-broonie@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In wait for CS IOCTL code, the driver resets the incoming args structure
before returning to the user, regardless of the return value of the
IOCTL.
In case the IOCTL returns EINTR, resetting the args will result in error
in case the userspace will repeat the ioctl call immediately (which is
the behavior in the hl-thunk userspace library).
The solution is to reset the args only if the driver returns success (0)
as a return value for the IOCTL.
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Staged submission consists of multiple command submissions.
In order to be explicit, driver should return a single cs sequence
for every cs in the submission, or else user may try to wait on
an internal CS rather than waiting for the whole submission.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add handling for case where the user doesn't set wait offset,
and keeps it as 0. In such a case the driver will decrement one
from this zero value which will cause the code to wait for
wrong number of signals.
The solution is to treat this case as in legacy wait cs,
and wait for the next signal.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As user can send wrong arguments to multi CS API, we rate limit
the amount of errors dumped to dmesg, in addition we change the
severity to warning.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Couple of fixes to the LBW RR configuration:
1. Add missing configuration of the SM RR registers in the DMA_IF.
2. Remove HBW range that doesn't belong.
3. Add entire gap + DBG area, from end of TPC7 to end of entire
DBG space.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As collective wait operation is required only when NIC ports are
available, we disable the option to submit a CS in case all the ports
are disabled, which is the current situation in the upstream driver.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to FLR scenario when running inside a VM, we must not use indirect
MSI because it might cause some issues on VM destroy.
In a VM we use single MSI mode in contrary to multi MSI mode which is
used in bare-metal.
Hence direct MSI should be used in single MSI mode only.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case of single staged cs with both first/last indications
set, we reach a scenario where in cs_release function flow
we don't cancel the TDR work before freeing the cs memory,
this lead to kernel OOPs since when the timer expires
the work pointer will be freed already.
In addition treat wait encaps cs "not found" handle
as "OK" for the user in order to keep the user interface
for both legacy and encpas signal/wait features the same.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We have a potential race where a user interrupt can be received
in between user thread value comparison and before request was
added to wait list. This means that if no consecutive interrupt
will be received, user thread will timeout and fail.
The solution is to add the request to wait list before we
perform the comparison.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the struct_size() helper to do the arithmetic instead of the
argument "size + size * count" in the kzalloc() function.
[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210905153707.9638-1-len.baker@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull misc driver fix from Greg KH:
"Here is a single patch for 5.15-rc1, for the lkdtm misc driver.
It resolves a build issue that many people were hitting with your
current tree, and Kees and others felt would be good to get merged
before -rc1 comes out, to prevent them from having to constantly hit
it as many development trees restart on -rc1, not older -rc releases.
It has NOT been in linux-next, but has passed 0-day testing and looks
'obviously correct' when reviewing it locally :)"
* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lkdtm: Use init_uts_ns.name instead of macros
Pull habanalabs updates from Greg KH:
"Here is another round of misc driver patches for 5.15-rc1.
In here is only updates for the Habanalabs driver. This request is
late because the previously-objected-to dma-buf patches are all
removed and some fixes that you and others found are now included in
here as well.
All of these have been in linux-next for well over a week with no
reports of problems, and they are all self-contained to only this one
driver. Full details are in the shortlog"
* tag 'char-misc-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (61 commits)
habanalabs/gaudi: hwmon default card name
habanalabs: add support for f/w reset
habanalabs/gaudi: block ICACHE_BASE_ADDERESS_HIGH in TPC
habanalabs: cannot sleep while holding spinlock
habanalabs: never copy_from_user inside spinlock
habanalabs: remove unnecessary device status check
habanalabs: disable IRQ in user interrupts spinlock
habanalabs: add "in device creation" status
habanalabs/gaudi: invalidate PMMU mem cache on init
habanalabs/gaudi: size should be printed in decimal
habanalabs/gaudi: define DC POWER for secured PMC
habanalabs/gaudi: unmask out of bounds SLM access interrupt
habanalabs: add userptr_lookup node in debugfs
habanalabs/gaudi: fetch TPC/MME ECC errors from F/W
habanalabs: modify multi-CS to wait on stream masters
habanalabs/gaudi: add monitored SOBs to state dump
habanalabs/gaudi: restore user registers when context opens
habanalabs/gaudi: increase boot fit timeout
habanalabs: update to latest firmware headers
habanalabs/gaudi: minimize number of register reads
...
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Move all the Intel drivers into their own subdir(s) (mostly Kate's
work)
- New meraki-mx100 platform driver
- Asus WMI driver enhancements, including support for
/sys/firmware/acpi/platform_profile
- New BIOS SAR driver for Intel M.2 WWAM modems
- Alder Lake support for the Intel PMC driver
- A whole bunch of cleanups + fixes all over the place"
* tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
platform/x86: dell-smbios-wmi: Add missing kfree in error-exit from run_smbios_call
platform/x86: dell-smbios-wmi: Avoid false-positive memcpy() warning
platform/x86: ISST: use semi-colons instead of commas
platform/x86: asus-wmi: Fix "unsigned 'retval' is never less than zero" smatch warning
platform/x86: asus-wmi: Delete impossible condition
platform/x86: hp_accel: Convert to be a platform driver
platform/x86: hp_accel: Remove _INI method call
platform/mellanox: mlxbf-pmc: fix kernel-doc notation
platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH
platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core
platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake
platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver
platform/x86: intel-wmi-thunderbolt: Move to intel sub-directory
platform/x86: intel-wmi-sbl-fw-update: Move to intel sub-directory
platform/x86: intel-vbtn: Move to intel sub-directory
platform/x86: intel_oaktrail: Move to intel sub-directory
platform/x86: intel_int0002_vgpio: Move to intel sub-directory
platform/x86: intel-hid: Move to intel sub-directory
platform/x86: intel_atomisp2: Move to intel sub-directory
platform/x86: intel_speed_select_if: Move to intel sub-directory
...
- Add max-virtual-functions to endpoint binding (Kishon Vijay Abraham I)
- Add pci_epf_add_vepf() API to add virtual function to endpoint (Kishon
Vijay Abraham I)
- Add pci_epf_vepf_link() to link virtual function to endpoint physical
function (Kishon Vijay Abraham I)
- Add virtual function number to pci_epc_ops endpoint ops interfaces
(Kishon Vijay Abraham I)
- Simplify register base address computation for endpoint BAR configuration
(Kishon Vijay Abraham I)
- Add support to configure virtual functions in cadence endpoint driver
(Kishon Vijay Abraham I)
- Add SR-IOV configuration to endpoint test driver (Kishon Vijay Abraham I)
- Document configfs usage to create virtual functions for endpoints (Kishon
Vijay Abraham I)
* remotes/lorenzo/pci/endpoint:
Documentation: PCI: endpoint/pci-endpoint-cfs: Guide to use SR-IOV
misc: pci_endpoint_test: Populate sriov_configure ops to configure SR-IOV device
PCI: cadence: Add support to configure virtual functions
PCI: cadence: Simplify code to get register base address for configuring BAR
PCI: endpoint: Add virtual function number in pci_epc ops
PCI: endpoint: Add support to link a physical function to a virtual function
PCI: endpoint: Add support to add virtual function in endpoint core
dt-bindings: PCI: pci-ep: Add binding to specify virtual function
