The raw value conversion to obtain a measurement in lux as
INT_PLUS_MICRO does not calculate the decimal part properly to display
it as micro (in this case microlux). It only calculates the module to
obtain the decimal part from a resolution that is 10000 times the
provided in the datasheet (0.5376 lux/cnt for the veml6030). The
resulting value must still be multiplied by 100 to make it micro.
This bug was introduced with the original implementation of the driver.
Only the illuminance channel is fixed becuase the scale is non sensical
for the intensity channels anyway.
Cc: stable@vger.kernel.org
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241016-veml6030-fix-processed-micro-v1-1-4a5644796437@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan writes:
IIO: 1st set of fixes for the 6.12 cycle.
Most of this pull request is the result of Javier Carrasco doing a
careful audit for missing Kconfig dependencies that luck has meant
the random builds have never hit. The rest is the usual mix of old
bugs that have surfaced and some fallout from the recent merge window.
adi,ad5686
- Fix binding duplication of compatible strings.
bosch,bma400
- Fix an uninitialized variable in the event tap handling.
bosch,bmi323
- Fix several issues in the register saving and restore on suspend/resume
sensiron,spd500
- Fix missing CRC8 dependency
ti,op3001
- Fix a missing full-scale range value (values above this point were
all reported wrongly)
vishay,veml6030
- Fix a segmentation fault due to some type confusion.
- Fix wrong ambient light sensor resolution.
* tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (34 commits)
iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig
iio: frequency: {admv4420,adrf6780}: format Kconfig entries
iio: adc: ad4695: Add missing Kconfig select
iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()
iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig
iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig
iio: resolver: ad2s1210 add missing select REGMAP in Kconfig
iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: light: bu27008: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: chemical: ens160: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
...
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
The driver still uses the sensor resolution provided in the datasheet
until Rev. 1.6, 28-Apr-2022, which was updated with Rev 1.7,
28-Nov-2023. The original ambient light resolution has been updated from
0.0036 lx/ct to 0.0042 lx/ct, which is the value that can be found in
the current device datasheet.
Update the default resolution for IT = 100 ms and GAIN = 1/8 from the
original 4608 mlux/cnt to the current value from the "Resolution and
maximum detection range" table (Application Note 84367, page 5), 5376
mlux/cnt.
Cc: <stable@vger.kernel.org>
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240923-veml6035-v2-1-58c72a0df31c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The opt3001 driver uses predetermined full-scale range values to
determine what exponent to use for event trigger threshold values.
The problem is that one of the values specified in the datasheet is
missing from the implementation. This causes larger values to be
scaled down to an incorrect exponent, effectively reducing the
maximum settable threshold value by a factor of 2.
Add missing full-scale range array value.
Fixes: 94a9b7b180 ("iio: light: add support for TI's opt3001 light sensor")
Signed-off-by: Emil Gedenryd <emil.gedenryd@axis.com>
Cc: <Stable@vger.kernel.org>
Link: https://patch.msgid.link/20240913-add_opt3002-v2-1-69e04f840360@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The dev pointer that is received as an argument in the
in_illuminance_period_available_show function references the device
embedded in the IIO device, not in the i2c client.
dev_to_iio_dev() must be used to accessthe right data. The current
implementation leads to a segmentation fault on every attempt to read
the attribute because indio_dev gets a NULL assignment.
This bug has been present since the first appearance of the driver,
apparently since the last version (V6) before getting applied. A
constant attribute was used until then, and the last modifications might
have not been tested again.
Cc: stable@vger.kernel.org
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240913-veml6035-v1-3-0b09c0c90418@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for BH1745, which is an I2C colour sensor with red, green,
blue and clear channels. It has a programmable active low interrupt
pin. Interrupt occurs when the signal from the selected interrupt
source channel crosses set interrupt threshold high or low level.
Interrupt source for the device can be configured by enabling the
corresponding event. Interrupt latch is always enabled when setting
up interrupt.
Add myself as the maintainer for this driver in MAINTAINERS.
Signed-off-by: Mudit Sharma <muditsharma.info@gmail.com>
Reviewed-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240718220208.331942-2-muditsharma.info@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move scale values into a static table, perform look up of those
scale values in noa1305_scale() simply by using the integration
time register content as an index, because the integration time
register content directly maps to the table values.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20240715183120.143417-3-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The only channel this hardware supports is IIO_LIGHT, if the channel
is anything else, exit right away. The 'ret' variable is now always
only assigned by noa1305_measure(), do not initialize it anymore.
Update function parameter indent. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20240715183120.143417-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BU27034 light sensor has two data channels for measuring
different frequencies of light. The result from these channels is
combined into Lux value while the raw channel values are reported via
intensity channels.
Both of the intensity channels have adjustable gain setting which
impacts the scale of the raw channels. Eg, doubling the gain will double
the values read from the raw channels, which halves the scale value. The
integration time can also be set for the sensor. This does also have an
impact to the scale of the intensity channels because increasing the
integration time will also increase the values reported via the raw
channels.
Impact of integration time to the scale and the fact that the scale value
does not start from '1', can make it hard for a human reader to compute the
gain values based on the scale.
Add read-only HARDWAREGAIN to help debugging.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/ec349847cc994f3bd632e99b408a31e7c70581d0.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BU27034NUC was cancelled and BU27034ANUC is replacing this
sensor. These senors aren't compatible from the software point of view.
According to ROHM, the BU27034NUC was never mass-produced. Hence dropping
the BU27034NUC support and using this driver to support BU27034ANUC
should not be a problem to users. We however need to ensure than people
who use old kernel with the old BU27034NUC driver don't get the old
driver probed for the new sensor.
Prepare to use the BU27034NUC driver to support the new BU27034ANUC and
change the compatible to prevent probing the old driver with the new
sensor.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/ed8b963b0cd3a84c06a494c79969a136d5abcf92.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
