Instead of calling release_firmware() on every error and then jumping
lets have a common release_firmware() in the error path.
This patch also fixes a memory leak where we missed release_firmware()
if mic_x100_load_command_line() fails.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If request_firmware() succeeds then rc becomes 0. After that if the test
for strcmp() fails then we were jumping to label done: and returning rc.
But rc being 0 we returned success whereas we have failed here and we
were supposed to return an error.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>From the error path we are printing an error message with dev_err(). No
need to print almost same message with dev_dbg().
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the loop we test "if (!retry)" to see if we timedout. The problem
is "retry--" is a post-op so retry will be -1 at the end of the loop. I
have fixed this by changing it to a pre-op instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following crash seen when MIC reset is invoked in
RESET_FAILED state due to device_del being called a second time on an
already deleted device:
[<ffffffff813b2295>] device_del+0x45/0x1d0
[<ffffffff813b243e>] device_unregister+0x1e/0x60
[<ffffffffa040f1c2>] scif_unregister_device+0x12/0x20 [scif_bus]
[<ffffffffa042f75a>] cosm_stop+0xaa/0xe0 [mic_cosm]
[<ffffffffa042f844>] cosm_reset_trigger_work+0x14/0x20 [mic_cosm]
The fix consists in realizing that because cosm_reset changes the
state to MIC_RESETTING, cosm_stop needs the previous state, before it
changed to MIC_RESETTING, to decide whether a hw_ops->stop had
previously been issued. This is now provided in a new cosm_device
member cdev->prev_state.
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the character device write method allocates a temporary buffer
for user's data, but the user's data size is not sanitized and can cause
arbitrarily large allocations via kzalloc() or an integer overflow that
will then result in overwriting kernel memory.
This patch trims the input buffer size to avoid these issues.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since both sw_start and sw_end are master indices, the size of array
that holds them is sw_end - sw_start + 1, which the current code gets
wrong, allocating one item less than required.
This patch corrects the allocation size, avoiding potential slab
corruption.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
[alexander.shishkin@linux.intel.com: re-wrote the commit message]
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the list of stm_sources linked to an stm device is protected by
a spinlock, which also means that sources' .unlink() method is called under
this spinlock. However, this method may (and does) sleep, which means
trouble.
This patch slightly reworks locking around stm::link_list so that bits that
might_sleep() are called with a mutex held instead. Modification of this
list requires both mutex and spinlock to be held, while looking at the list
can be done under either mutex or spinlock.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now, if stm device removal has to unbind from a policy (that is,
an stm device that has STP policy, gets removed), it will trigger a
nested lock on the stm device's policy mutex.
This patch fixes the problem by moving the locking from the policy
unbinding to policy removal (configfs path), where it's actually needed;
the other caller of the policy unbinding function already takes the
mutex around the call.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The newly added STM code uses SRCU, but does not ensure that
this code is part of the kernel:
drivers/built-in.o: In function `stm_source_link_show':
include/linux/srcu.h:221: undefined reference to `__srcu_read_lock'
include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `stm_source_link_drop':
include/linux/srcu.h:221: undefined reference to `__srcu_read_lock'
include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock'
This adds a Kconfig 'select' statement like all the other SRCU using
drivers have.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 7bd1d4093c ("stm class: Introduce an abstraction for System Trace Module devices")
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The starting node for a klist iteration is often passed in from
somewhere way above the klist infrastructure, meaning there's no
guarantee the node is still on the list. We've seen this in SCSI where
we use bus_find_device() to iterate through a list of devices. In the
face of heavy hotplug activity, the last device returned by
bus_find_device() can be removed before the next call. This leads to
Dec 3 13:22:02 localhost kernel: WARNING: CPU: 2 PID: 28073 at include/linux/kref.h:47 klist_iter_init_node+0x3d/0x50()
Dec 3 13:22:02 localhost kernel: Modules linked in: scsi_debug x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel joydev iTCO_wdt dcdbas ipmi_devintf acpi_power_meter iTCO_vendor_support ipmi_si imsghandler pcspkr wmi acpi_cpufreq tpm_tis tpm shpchp lpc_ich mfd_core nfsd nfs_acl lockd grace sunrpc tg3 ptp pps_core
Dec 3 13:22:02 localhost kernel: CPU: 2 PID: 28073 Comm: cat Not tainted 4.4.0-rc1+ #2
Dec 3 13:22:02 localhost kernel: Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013
Dec 3 13:22:02 localhost kernel: ffffffff81a20e77 ffff880613acfd18 ffffffff81321eef 0000000000000000
Dec 3 13:22:02 localhost kernel: ffff880613acfd50 ffffffff8107ca52 ffff88061176b198 0000000000000000
Dec 3 13:22:02 localhost kernel: ffffffff814542b0 ffff880610cfb100 ffff88061176b198 ffff880613acfd60
Dec 3 13:22:02 localhost kernel: Call Trace:
Dec 3 13:22:02 localhost kernel: [<ffffffff81321eef>] dump_stack+0x44/0x55
Dec 3 13:22:02 localhost kernel: [<ffffffff8107ca52>] warn_slowpath_common+0x82/0xc0
Dec 3 13:22:02 localhost kernel: [<ffffffff814542b0>] ? proc_scsi_show+0x20/0x20
Dec 3 13:22:02 localhost kernel: [<ffffffff8107cb4a>] warn_slowpath_null+0x1a/0x20
Dec 3 13:22:02 localhost kernel: [<ffffffff8167225d>] klist_iter_init_node+0x3d/0x50
Dec 3 13:22:02 localhost kernel: [<ffffffff81421d41>] bus_find_device+0x51/0xb0
Dec 3 13:22:02 localhost kernel: [<ffffffff814545ad>] scsi_seq_next+0x2d/0x40
[...]
And an eventual crash. It can actually occur in any hotplug system
which has a device finder and a starting device.
We can fix this globally by making sure the starting node for
klist_iter_init_node() is actually a member of the list before using it
(and by starting from the beginning if it isn't).
Reported-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Other than plainly parsing the device tree there is no way to
know which CPU a tracer is affined to. As such adding an
interface to lookup the CPU field enclosed in the etm_drvdata
structure that was initialised at boot time.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The coresight drivers have absolutely no control over bind and unbind
operations triggered from sysfs. The operations simply can't be
cancelled or denied event when one or several tracing sessions are
under way. Since the memory associated to individual device is
invariably freed, the end result is a kernel crash when the path from
source to sink is travelled again as demonstrated here[1].
One solution could be to keep track of all the path (i.e tracing
session) that get created and iterate through the elements of those path
looking for the coresight device that is being removed. This proposition
doesn't scale well since there is no upper bound on the amount of
concurrent trace session that can be created.
With the above in mind, this patch prevent devices from being unbounded
from their driver by using the driver->suppress_bind_attr option. That way
trace sessions can be managed without fearing to loose devices.
Since device can't be removed anymore the xyz_remove() functions found in
each driver is also removed.
[1]. http://www.spinics.net/lists/arm-kernel/msg474952.html
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function 'coresight_unregister()', all references to the csdev that
is being taken away need to be removed from the topology. Otherwise
building the next coresight path from source to sink may use memory
that has been released.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reference count taken by function bus_find_device() needs
to be released if a child device is found, something this patch
is adding.
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In its current form the code never frees csdev->refcnt allocated
in coresight_register(). There is also a problem with csdev->conns
that is freed before device_unregister() rather than in the device
release function.
This patch addresses both issues by moving kfree(csdev->conns) to
coresight_device_release() and freeing csdev->refcnt, also in
the same function.
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change restricts the reading and setting of the head and tail
pointers on 32bit X86 to 32bit for both correctness and
performance reasons. On uniprocessor X86_32, the atomic64_read
may be implemented as a non-locked cmpxchg8b. This may result in
updates to the pointers done by the VMCI device being overwritten.
On MP systems, there is no such correctness issue, but using 32bit
atomics avoids the overhead of the locked 64bit operation. All this
is safe because the queue size on 32bit systems will never exceed
a 32bit value.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the channel send side, many of the VMBUS
device drivers explicity serialize access to the
outgoing ring buffer. Give more control to the
VMBUS device drivers in terms how to serialize
accesss to the outgoing ring buffer.
The default behavior will be to aquire the
ring lock to preserve the current behavior.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function hv_ringbuffer_read() is called always on a pre-assigned
CPU. Each chnnel is bound to a specific CPU and this function is
always called on the CPU the channel is bound. There is no need to
acquire the spin lock; get rid of this overhead.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hvsock driver needs this API to release all the resources related
to the channel.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only the coming hv_sock driver has a "true" value for this flag.
We treat the hvsock offers/channels as special VMBus devices.
Since the hv_sock driver handles all the hvsock offers/channels, we need to
tweak vmbus_match() for hv_sock driver, so we introduce this flag.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A function to send the type of message is also added.
The coming net/hvsock driver will use this function to proactively request
the host to offer a VMBus channel for a new hvsock connection.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the hvsock channel's outbound ringbuffer is full (i.e.,
hv_ringbuffer_write() returns -EAGAIN), we should avoid the unnecessary
signaling the host.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clocksource_change_rating() involves mutex usage and can't be called
in interrupt context. It also makes sense to avoid doing redundant work
on crash.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have to call vmbus_initiate_unload() on crash to make kdump work but
the crash can also be happening in interrupt (e.g. Sysrq + c results in
such) where we can't schedule or the following will happen:
[ 314.905786] bad: scheduling from the idle thread!
Just skipping the wait (and even adding some random wait here) won't help:
to make host-side magic working we're supposed to receive CHANNELMSG_UNLOAD
(and actually confirm the fact that we received it) but we can't use
interrupt-base path (vmbus_isr()-> vmbus_on_msg_dpc()). Implement a simple
busy wait ignoring all the other messages and use it if we're in an
interrupt context.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we pick a CPU to use for a new subchannel we try find a non-used one
on the appropriate NUMA node, we keep track of them with the
primary->alloced_cpus_in_node mask. Under normal circumstances we don't run
out of available CPUs but it is possible when we we don't initialize some
cpus in Linux, e.g. when we boot with 'nr_cpus=' limitation.
Avoid the infinite loop in init_vp_index() by checking that we still have
non-used CPUs in the alloced_cpus_in_node mask and resetting it in case
we don't.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add vendor and device attributes to VMBUS devices. These will be used
by Hyper-V tools as well user-level RDMA libraries that will use the
vendor/device tuple to discover the RDMA device.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup vmbus_set_event() by inlining the hypercall to post
the event and since the return value of vmbus_set_event() is not checked,
make it void. As part of this cleanup, get rid of the function
hv_signal_event() as it is only callled from vmbus_set_event().
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We recently messed up the error handling here. We can return with the
pipe->lock held or sometimes we unlock twice by mistake.
Fixes: 2f3be88237 ('goldfish_pipe: Pin pages to memory while copying and other cleanups')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The error code passed to ERR_PTR() always should be negated. Also, the
return value of scif_add_mmu_notifier() was never checked.
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed integer overflow is undefined. Also I added a check for
"(offset < 0)" in scif_unregister() because that makes it match the
other conditions and because I didn't want to subtract a negative.
Fixes: ba612aa8b4 ('misc: mic: SCIF memory registration and unregistration')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allignment matched to the open parenthesis to avoid the
check detected by the checkpatch.pl.
CHECK: Alignment should match open parenthesis
Signed-off-by: Anjali Menon <cse.anjalimenon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following checkpatch.pl warning:
WARNING: void function return statements are not generally useful
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The existing kerneldoc blocs had a few issues:
- some of them didn't start with /**
- some used -- instead of - to separate the short description
- some descriptions had text looking like section headers
- some descriptions started with "to" while some used the imperative: use the
imperative everywhere
- some had a "with:" at the end of the shortdesc that didn't make sense once
formatted by kernel-docs
- two argument names where out of sync with the prototype
Signed-off-by: Manuel Pégourié-Gonnard <mpg@elzevir.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
