These are bookkeeping parts of the new num_of_vlans filter.
Defines, dump, load and set are being done here.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our customers in the fiber telecom world have network configurations
where they would like to control their traffic according to the number
of tags appearing in the packet.
For example, TR247 GPON conformance test suite specification mostly
talks about untagged, single, double tagged packets and gives lax
guidelines on the vlan protocol vs. number of vlan tags.
This is different from the common IT networks where 802.1Q and 802.1ad
protocols are usually describe single and double tagged packet. GPON
configurations that we work with have arbitrary mix the above protocols
and number of vlan tags in the packet.
The goal is to make the following TC commands possible:
tc filter add dev eth1 ingress flower \
num_of_vlans 1 vlan_prio 5 action drop
From our logs, we have redirect rules such that:
tc filter add dev $GPON ingress flower num_of_vlans $N \
action mirred egress redirect dev $DEV
where N can range from 0 to 3 and $DEV is the function of $N.
Also there are rules setting skb mark based on the number of vlans:
tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \
$P action skbedit mark $M
This new dissector allows extracting the number of vlan tags existing in
the packet.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes issue:
* If we install tc filters with act_skbedit in clsact hook.
It doesn't work, because netdev_core_pick_tx() overwrites
queue_mapping.
$ tc filter ... action skbedit queue_mapping 1
And this patch is useful:
* We can use FQ + EDT to implement efficient policies. Tx queues
are picked by xps, ndo_select_queue of netdev driver, or skb hash
in netdev_core_pick_tx(). In fact, the netdev driver, and skb
hash are _not_ under control. xps uses the CPUs map to select Tx
queues, but we can't figure out which task_struct of pod/containter
running on this cpu in most case. We can use clsact filters to classify
one pod/container traffic to one Tx queue. Why ?
In containter networking environment, there are two kinds of pod/
containter/net-namespace. One kind (e.g. P1, P2), the high throughput
is key in these applications. But avoid running out of network resource,
the outbound traffic of these pods is limited, using or sharing one
dedicated Tx queues assigned HTB/TBF/FQ Qdisc. Other kind of pods
(e.g. Pn), the low latency of data access is key. And the traffic is not
limited. Pods use or share other dedicated Tx queues assigned FIFO Qdisc.
This choice provides two benefits. First, contention on the HTB/FQ Qdisc
lock is significantly reduced since fewer CPUs contend for the same queue.
More importantly, Qdisc contention can be eliminated completely if each
CPU has its own FIFO Qdisc for the second kind of pods.
There must be a mechanism in place to support classifying traffic based on
pods/container to different Tx queues. Note that clsact is outside of Qdisc
while Qdisc can run a classifier to select a sub-queue under the lock.
In general recording the decision in the skb seems a little heavy handed.
This patch introduces a per-CPU variable, suggested by Eric.
The xmit.skip_txqueue flag is firstly cleared in __dev_queue_xmit().
- Tx Qdisc may install that skbedit actions, then xmit.skip_txqueue flag
is set in qdisc->enqueue() though tx queue has been selected in
netdev_tx_queue_mapping() or netdev_core_pick_tx(). That flag is cleared
firstly in __dev_queue_xmit(), is useful:
- Avoid picking Tx queue with netdev_tx_queue_mapping() in next netdev
in such case: eth0 macvlan - eth0.3 vlan - eth0 ixgbe-phy:
For example, eth0, macvlan in pod, which root Qdisc install skbedit
queue_mapping, send packets to eth0.3, vlan in host. In __dev_queue_xmit() of
eth0.3, clear the flag, does not select tx queue according to skb->queue_mapping
because there is no filters in clsact or tx Qdisc of this netdev.
Same action taked in eth0, ixgbe in Host.
- Avoid picking Tx queue for next packet. If we set xmit.skip_txqueue
in tx Qdisc (qdisc->enqueue()), the proper way to clear it is clearing it
in __dev_queue_xmit when processing next packets.
For performance reasons, use the static key. If user does not config the NET_EGRESS,
the patch will not be compiled.
+----+ +----+ +----+
| P1 | | P2 | | Pn |
+----+ +----+ +----+
| | |
+-----------+-----------+
|
| clsact/skbedit
| MQ
v
+-----------+-----------+
| q0 | q1 | qn
v v v
HTB/FQ HTB/FQ ... FIFO
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Cc: Antoine Tenart <atenart@kernel.org>
Cc: Wei Wang <weiwan@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to properly inform user about relationship between port and
line card, introduce a driver API to set line card for a port. Use this
information to extend port devlink netlink message by line card index
and also include the line card index into phys_port_name and by that
into a netdevice name.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow driver to mark a line card as active. Expose this state to the
userspace over devlink netlink interface with proper notifications.
'active' state means that line card was plugged in after
being provisioned.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to be able to configure all needed stuff on a port/netdevice
of a line card without the line card being present, introduce line card
provisioning. Basically by setting a type, provisioning process will
start and driver is supposed to create a placeholder for instances
(ports/netdevices) for a line card type.
Allow the user to query the supported line card types over line card
get command. Then implement two netlink command SET to allow user to
set/unset the card type.
On the driver API side, add provision/unprovision ops and supported
types array to be advertised. Upon provision op call, the driver should
take care of creating the instances for the particular line card type.
Introduce provision_set/clear() functions to be called by the driver
once the provisioning/unprovisioning is done on its side. These helpers
are not to be called directly due to the async nature of provisioning.
Example:
$ devlink port # No ports are listed
$ devlink lc
pci/0000:01:00.0:
lc 1 state unprovisioned
supported_types:
16x100G
lc 2 state unprovisioned
supported_types:
16x100G
lc 3 state unprovisioned
supported_types:
16x100G
lc 4 state unprovisioned
supported_types:
16x100G
lc 5 state unprovisioned
supported_types:
16x100G
lc 6 state unprovisioned
supported_types:
16x100G
lc 7 state unprovisioned
supported_types:
16x100G
lc 8 state unprovisioned
supported_types:
16x100G
$ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G
$ devlink lc show pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
lc 8 state active type 16x100G
supported_types:
16x100G
$ devlink port
pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false
pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4
pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4
pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4
pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4
pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4
pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4
pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4
pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4
pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4
pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4
pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4
pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4
pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4
pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4
pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4
pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4
$ devlink lc set pci/0000:01:00.0 lc 8 notype
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the devlink API so the driver is going to be able to create and
destroy linecard instances. There can be multiple line cards per devlink
device. Expose this new type of object over devlink netlink API to the
userspace, with notifications.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
packets in OFO queue might be redundant, and dropped.
tcp_drop() is no longer needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add one reason for packets dropped from OFO queue because
of memory pressure.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add TCP_TOO_OLD_ACK and TCP_ACK_UNSENT_DATA drop
reasons so that tcp_rcv_established() can report
them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic support for drop reasons in tcp_rcv_state_process()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Creates four new drop reasons for the following cases:
1) packet being rejected by RFC 7323 PAWS check
2) packet being rejected by SEQUENCE check
3) Invalid RST packet
4) Invalid SYN packet
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new neighbour cache entry in STALE state for routers on receiving
an unsolicited (gratuitous) neighbour advertisement with
target link-layer-address option specified.
This is similar to the arp_accept configuration for IPv4.
A new sysctl endpoint is created to turn on this behaviour:
/proc/sys/net/ipv6/conf/interface/accept_unsolicited_na.
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently tx push is a standard driver feature which controls use of a fast
path descriptor push. So this patch extends the ringparam APIs and data
structures to support set/get tx push by ethtool -G/g.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless and netfilter.
Current release - regressions:
- smc: fix af_ops of child socket pointing to released memory
- wifi: ath9k: fix usage of driver-private space in tx_info
Previous releases - regressions:
- ipv6: fix panic when forwarding a pkt with no in6 dev
- sctp: use the correct skb for security_sctp_assoc_request
- smc: fix NULL pointer dereference in smc_pnet_find_ib()
- sched: fix initialization order when updating chain 0 head
- phy: don't defer probe forever if PHY IRQ provider is missing
- dsa: revert "net: dsa: setup master before ports"
- dsa: felix: fix tagging protocol changes with multiple CPU ports
- eth: ice:
- fix use-after-free when freeing @rx_cpu_rmap
- revert "iavf: fix deadlock occurrence during resetting VF
interface"
- eth: lan966x: stop processing the MAC entry is port is wrong
Previous releases - always broken:
- sched:
- flower: fix parsing of ethertype following VLAN header
- taprio: check if socket flags are valid
- nfc: add flush_workqueue to prevent uaf
- veth: ensure eth header is in skb's linear part
- eth: stmmac: fix altr_tse_pcs function when using a fixed-link
- eth: macb: restart tx only if queue pointer is lagging
- eth: macvlan: fix leaking skb in source mode with nodst option"
* tag 'net-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"
rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS replies
net: dsa: felix: fix tagging protocol changes with multiple CPU ports
tun: annotate access to queue->trans_start
nfc: nci: add flush_workqueue to prevent uaf
net: dsa: realtek: don't parse compatible string for RTL8366S
net: dsa: realtek: fix Kconfig to assure consistent driver linkage
net: ftgmac100: access hardware register after clock ready
Revert "net: dsa: setup master before ports"
macvlan: Fix leaking skb in source mode with nodst option
netfilter: nf_tables: nft_parse_register can return a negative value
net: lan966x: Stop processing the MAC entry is port is wrong.
net: lan966x: Fix when a port's upper is changed.
net: lan966x: Fix IGMP snooping when frames have vlan tag
net: lan966x: Update lan966x_ptp_get_nominal_value
sctp: Initialize daddr on peeled off socket
net/smc: Fix af_ops of child socket pointing to released memory
net/smc: Fix NULL pointer dereference in smc_pnet_find_ib()
net/smc: use memcpy instead of snprintf to avoid out of bounds read
net: macb: Restart tx only if queue pointer is lagging
...
Pull sound fixes from Takashi Iwai:
"This became an unexpectedly large pull request due to various
regression fixes in the previous kernels.
The majority of fixes are a series of patches to address the
regression at probe errors in devres'ed drivers, while there are yet
more fixes for the x86 SG allocations and for USB-audio buffer
management. In addition, a few HD-audio quirks and other small fixes
are found"
* tag 'sound-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits)
ALSA: usb-audio: Limit max buffer and period sizes per time
ALSA: memalloc: Add fallback SG-buffer allocations for x86
ALSA: nm256: Don't call card private_free at probe error path
ALSA: mtpav: Don't call card private_free at probe error path
ALSA: rme9652: Fix the missing snd_card_free() call at probe error
ALSA: hdspm: Fix the missing snd_card_free() call at probe error
ALSA: hdsp: Fix the missing snd_card_free() call at probe error
ALSA: oxygen: Fix the missing snd_card_free() call at probe error
ALSA: lx6464es: Fix the missing snd_card_free() call at probe error
ALSA: cmipci: Fix the missing snd_card_free() call at probe error
ALSA: aw2: Fix the missing snd_card_free() call at probe error
ALSA: als300: Fix the missing snd_card_free() call at probe error
ALSA: lola: Fix the missing snd_card_free() call at probe error
ALSA: bt87x: Fix the missing snd_card_free() call at probe error
ALSA: sis7019: Fix the missing error handling
ALSA: intel_hdmi: Fix the missing snd_card_free() call at probe error
ALSA: via82xx: Fix the missing snd_card_free() call at probe error
ALSA: sonicvibes: Fix the missing snd_card_free() call at probe error
ALSA: rme96: Fix the missing snd_card_free() call at probe error
ALSA: rme32: Fix the missing snd_card_free() call at probe error
...
Pull fscache fixes from David Howells:
"Here's a collection of fscache and cachefiles fixes and misc small
cleanups. The two main fixes are:
- Add a missing unmark of the inode in-use mark in an error path.
- Fix a KASAN slab-out-of-bounds error when setting the xattr on a
cachefiles volume due to the wrong length being given to memcpy().
In addition, there's the removal of an unused parameter, removal of an
unused Kconfig option, conditionalising a bit of procfs-related stuff
and some doc fixes"
* tag 'fscache-fixes-20220413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: remove FSCACHE_OLD_API Kconfig option
fscache: Use wrapper fscache_set_cache_state() directly when relinquishing
fscache: Move fscache_cookies_seq_ops specific code under CONFIG_PROC_FS
fscache: Remove the cookie parameter from fscache_clear_page_bits()
docs: filesystems: caching/backend-api.rst: fix an object withdrawn API
docs: filesystems: caching/backend-api.rst: correct two relinquish APIs use
cachefiles: Fix KASAN slab-out-of-bounds in cachefiles_set_volume_xattr
cachefiles: unmark inode in use in error path
Certain ZTE modems, namely: MF823. MF831, MF910, built-in modem from
MF286R, expose both CDC-ECM and RNDIS network interfaces.
They have a trait of ignoring the locally-administered MAC address
configured on the interface both in CDC-ECM and RNDIS part,
and this leads to dropping of incoming traffic by the host.
However, the workaround was only present in CDC-ECM, and MF286R
explicitly requires it in RNDIS mode.
Re-use the workaround in rndis_host as well, to fix operation of MF286R
module, some versions of which expose only the RNDIS interface. Do so by
introducing new flag, RNDIS_DRIVER_DATA_DST_MAC_FIXUP, and testing for it
in rndis_rx_fixup. This is required, as RNDIS uses frame batching, and all
of the packets inside the batch need the fixup. This might introduce a
performance penalty, because test is done for every returned Ethernet
frame.
Apply the workaround to both "flavors" of RNDIS interfaces, as older ZTE
modems, like MF823 found in the wild, report the USB_CLASS_COMM class
interfaces, while MF286R reports USB_CLASS_WIRELESS_CONTROLLER.
Suggested-by: Bjørn Mork <bjorn@mork.no>
Cc: Kristian Evensen <kristian.evensen@gmail.com>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit bfe9b9d2df ("cdc_ether: Improve ZTE MF823/831/910 handling")
introduces a workaround for certain ZTE modems reporting invalid MAC
addresses over CDC-ECM.
The same issue was present on their RNDIS interface,which was fixed in
commit a5a18bdf74 ("rndis_host: Set valid random MAC on buggy devices").
However, internal modem of ZTE MF286R router, on its RNDIS interface, also
exhibits a second issue fixed already in CDC-ECM, of the device not
respecting configured random MAC address. In order to share the fixup for
this with rndis_host driver, export the workaround function, which will
be re-used in the following commit in rndis_host.
Cc: Kristian Evensen <kristian.evensen@gmail.com>
Cc: Bjørn Mork <bjorn@mork.no>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to add the skb drop reasons support to icmpv6_param_prob(),
introduce the function icmpv6_param_prob_reason() and make
icmpv6_param_prob() an inline call to it. This new function will be
used in the following patches.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() which is used in ip6_forward() and ip_forward()
with kfree_skb_reason().
The new drop reason 'SKB_DROP_REASON_PKT_TOO_BIG' is introduced for
the case that the length of the packet exceeds MTU and can't
fragment.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eventually, I find out the handler function for inputting route lookup
fail: ip_error().
The drop reasons we used in ip_error() are almost corresponding to
IPSTATS_MIB_*, and following new reasons are introduced:
SKB_DROP_REASON_IP_INADDRERRORS
SKB_DROP_REASON_IP_INNOROUTES
Isn't the name SKB_DROP_REASON_IP_HOSTUNREACH and
SKB_DROP_REASON_IP_NETUNREACH more accurate? To make them corresponding
to IPSTATS_MIB_*, we keep their name still.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to simply the definition and assignment for
'enum skb_drop_reason', introduce some helpers.
SKB_DR() is used to define a variable of type 'enum skb_drop_reason'
with the 'SKB_DROP_REASON_NOT_SPECIFIED' initial value.
SKB_DR_SET() is used to set the value of the variable. Seems it is
a little useless? But it makes the code shorter.
SKB_DR_OR() is used to set the value of the variable if it is not set
yet, which means its value is SKB_DROP_REASON_NOT_SPECIFIED.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ndm flags/state masks which will be used for bulk delete filtering.
All of these are used by the bridge and vxlan drivers. Also minimal attr
policy validation is added, it is up to ndo_fdb_del_bulk implementers to
further validate them.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new netdev op called ndo_fdb_del_bulk, it will be later used for
driver-specific bulk delete implementation dispatched from rtnetlink. The
first user will be the bridge, we need it to signal to rtnetlink from
the driver that we support bulk delete operation (NLM_F_BULK).
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new rtnl flag (RTNL_FLAG_BULK_DEL_SUPPORTED) which is used to
verify that the delete operation allows bulk object deletion. Also emit
a warning if anyone tries to set it for non-delete kind.
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new delete request modifier called NLM_F_BULK which, when
supported, would cause the request to delete multiple objects. The flag
is a convenient way to signal that a multiple delete operation is
requested which can be gradually added to different delete requests. In
order to make sure older kernels will error out if the operation is not
supported instead of doing something unintended we have to break a
required condition when implementing support for this flag, f.e. for
neighbors we will omit the mandatory mac address attribute.
Initially it will be used to add flush with filtering support for bridge
fdbs, but it also opens the door to add similar support to others.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper which extracts the msg type's kind using the kind mask (0x3).
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add rtnl kind names instead of using raw values. We'll need to
check for DEL kind later to validate bulk flag support.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As there are now no users of phylink_helper_basex_speed(), we can
remove this obsolete functionality.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent change for memory allocator replaced the SG-buffer handling
helper for x86 with the standard non-contiguous page handler. This
works for most cases, but there is a corner case I obviously
overlooked, namely, the fallback of non-contiguous handler without
IOMMU. When the system runs without IOMMU, the core handler tries to
use the continuous pages with a single SGL entry. It works nicely for
most cases, but when the system memory gets fragmented, the large
allocation may fail frequently.
Ideally the non-contig handler could deal with the proper SG pages,
it's cumbersome to extend for now. As a workaround, here we add new
types for (minimalistic) SG allocations, instead, so that the
allocator falls back to those types automatically when the allocation
with the standard API failed.
BTW, one better (but pretty minor) improvement from the previous
SG-buffer code is that this provides the proper mmap support without
the PCM's page fault handling.
Fixes: 2c95b92ecd ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)")
BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2272
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1198248
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220413054808.7547-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull hardening fixes from Kees Cook:
- latent_entropy: Use /dev/urandom instead of small GCC seed (Jason
Donenfeld)
- uapi/stddef.h: add missed include guards (Tadeusz Struk)
* tag 'hardening-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: latent_entropy: use /dev/urandom
uapi/linux/stddef.h: Add include guards
Pull nfsd fixes from Chuck Lever:
- Fix a write performance regression
- Fix crashes during request deferral on RDMA transports
* tag 'nfsd-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix the svc_deferred_event trace class
SUNRPC: Fix NFSD's request deferral on RDMA transports
nfsd: Clean up nfsd_file_put()
nfsd: Fix a write performance regression
SUNRPC: Return true/false (not 1/0) from bool functions
The internal recvmsg() functions have two parameters 'flags' and 'noblock'
that were merged inside skb_recv_datagram(). As a follow up patch to commit
f4b41f062c ("net: remove noblock parameter from skb_recv_datagram()")
this patch removes the separate 'noblock' parameter for recvmsg().
Analogue to the referenced patch for skb_recv_datagram() the 'flags' and
'noblock' parameters are unnecessarily split up with e.g.
err = sk->sk_prot->recvmsg(sk, msg, size, flags & MSG_DONTWAIT,
flags & ~MSG_DONTWAIT, &addr_len);
or in
err = INDIRECT_CALL_2(sk->sk_prot->recvmsg, tcp_recvmsg, udp_recvmsg,
sk, msg, size, flags & MSG_DONTWAIT,
flags & ~MSG_DONTWAIT, &addr_len);
instead of simply using only flags all the time and check for MSG_DONTWAIT
where needed (to preserve for the formerly separated no(n)block condition).
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20220411124955.154876-1-socketcan@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is a small helper function to handle the error path more easily
when an error happens during the probe for the device with the
device-managed card. Since devres releases in the reverser order of
the creations, usually snd_card_free() gets called at the last in the
probe error path unless it already reached snd_card_register() calls.
Due to this nature, when a driver expects the resource releases in
card->private_free, this might be called too lately.
As a workaround, one should call the probe like:
static int __some_probe(...) { // do real probe.... }
static int some_probe(...)
{
return snd_card_free_on_error(dev, __some_probe(dev, ...));
}
so that the snd_card_free() is called explicitly at the beginning of
the error path from the probe.
This function will be used in the upcoming fixes to address the
regressions by devres usages.
Fixes: e8ad415b7a ("ALSA: core: Add managed card creation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220412093141.8008-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Leon Romanovsky says:
====================
Mellanox shared branch that includes:
* Removal of FPGA TLS code https://lore.kernel.org/all/cover.1649073691.git.leonro@nvidia.com
Mellanox INNOVA TLS cards are EOL in May, 2018 [1]. As such, the code
is unmaintained, untested and not in-use by any upstream/distro oriented
customers. In order to reduce code complexity, drop the kernel code,
clean build config options and delete useless kTLS vs. TLS separation.
[1] https://network.nvidia.com/related-docs/eol/LCR-000286.pdf
* Removal of FPGA IPsec code https://lore.kernel.org/all/cover.1649232994.git.leonro@nvidia.com
Together with FPGA TLS, the IPsec went to EOL state in the November of
2019 [1]. Exactly like FPGA TLS, no active customers exist for this
upstream code and all the complexity around that area can be deleted.
[2] https://network.nvidia.com/related-docs/eol/LCR-000535.pdf
* Fix to undefined behavior from Borislav https://lore.kernel.org/all/20220405151517.29753-11-bp@alien8.de
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: (23 commits)
net/mlx5: Remove not-implemented IPsec capabilities
net/mlx5: Remove ipsec_ops function table
net/mlx5: Reduce kconfig complexity while building crypto support
net/mlx5: Move IPsec file to relevant directory
net/mlx5: Remove not-needed IPsec config
net/mlx5: Align flow steering allocation namespace to common style
net/mlx5: Unify device IPsec capabilities check
net/mlx5: Remove useless IPsec device checks
net/mlx5: Remove ipsec vs. ipsec offload file separation
RDMA/core: Delete IPsec flow action logic from the core
RDMA/mlx5: Drop crypto flow steering API
RDMA/mlx5: Delete never supported IPsec flow action
net/mlx5: Remove FPGA ipsec specific statistics
net/mlx5: Remove XFRM no_trailer flag
net/mlx5: Remove not-used IDA field from IPsec struct
net/mlx5: Delete metadata handling logic
net/mlx5_fpga: Drop INNOVA IPsec support
IB/mlx5: Fix undefined behavior due to shift overflowing the constant
net/mlx5: Cleanup kTLS function names and their exposure
net/mlx5: Remove tls vs. ktls separation as it is the same
...
====================
Link: https://lore.kernel.org/r/20220409055303.1223644-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new dscp_t type to replace the tos field of struct
fib_entry_notifier_info. This ensures ECN bits are ignored and makes it
compatible with the dscp field of struct fib_rt_info.
This also allows sparse to flag potential incorrect uses of DSCP and
ECN bits.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new dscp_t type to replace the tos field of struct fib_rt_info.
This ensures ECN bits are ignored and makes it compatible with the
fa_dscp field of struct fib_alias.
This also allows sparse to flag potential incorrect uses of DSCP and
ECN bits.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Replace unnecessary list_for_each_entry_continue() in nf_tables,
from Jakob Koschel.
2) Add struct nf_conntrack_net_ecache to conntrack event cache and
use it, from Florian Westphal.
3) Refactor ctnetlink_dump_list(), also from Florian.
4) Bump module reference counter on cttimeout object addition/removal,
from Florian.
5) Consolidate nf_log MAC printer, from Phil Sutter.
6) Add basic logging support for unknown ethertype, from Phil Sutter.
7) Consolidate check for sysctl nf_log_all_netns toggle, also from Phil.
8) Replace hardcode value in nft_bitwise, from Jeremy Sowden.
9) Rename BASIC-like goto tags in nft_bitwise to more meaningful names,
also from Jeremy.
10) nft_fib support for reverse path filtering with policy-based routing
on iif. Extend selftests to cover for this new usecase, from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in icmp_rcv() and icmpv6_rcv() with
kfree_skb_reason().
In order to get the reasons of the skb drops after icmp message handle,
we change the return type of 'handler()' in 'struct icmp_control' from
'bool' to 'enum skb_drop_reason'. This may change its original
intention, as 'false' means failure, but 'SKB_NOT_DROPPED_YET' means
success now. Therefore, all 'handler' and the call of them need to be
handled. Following 'handler' functions are involved:
icmp_unreach()
icmp_redirect()
icmp_echo()
icmp_timestamp()
icmp_discard()
And following new drop reasons are added:
SKB_DROP_REASON_ICMP_CSUM
SKB_DROP_REASON_INVALID_PROTO
The reason 'INVALID_PROTO' is introduced for the case that the packet
doesn't follow rfc 1122 and is dropped. This is not a common case, and
I believe we can locate the problem from the data in the packet. For now,
this 'INVALID_PROTO' is used for the icmp broadcasts with wrong types.
Maybe there should be a document file for these reasons. For example,
list all the case that causes the 'UNHANDLED_PROTO' and 'INVALID_PROTO'
drop reason. Therefore, users can locate their problems according to the
document.
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As David Ahern suggested, the reasons for skb drops should be more
general and not be code based.
Therefore, rename SKB_DROP_REASON_PTYPE_ABSENT to
SKB_DROP_REASON_UNHANDLED_PROTO, which is used for the cases of no
L3 protocol handler, no L4 protocol handler, version extensions, etc.
From previous discussion, now we have the aim to make these reasons
more abstract and users based, avoiding code based.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to report the reasons of skb drops in 'sock_queue_rcv_skb()',
introduce the function 'sock_queue_rcv_skb_reason()'.
As the return value of 'sock_queue_rcv_skb()' is used as the error code,
we can't make it as drop reason and have to pass extra output argument.
'sock_queue_rcv_skb()' is used in many places, so we can't change it
directly.
Introduce the new function 'sock_queue_rcv_skb_reason()' and make
'sock_queue_rcv_skb()' an inline call to it.
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull driver core updates from Greg KH:
"Here are two small driver core changes for 5.18-rc2.
They are the final bits in the removal of the default_attrs field in
struct kobj_type. I had to wait until after 5.18-rc1 for all of the
changes to do this came in through different development trees, and
then one new user snuck in. So this series has two changes:
- removal of the default_attrs field in the powerpc/pseries/vas code.
The change has been acked by the PPC maintainers to come through
this tree
- removal of default_attrs from struct kobj_type now that all
in-kernel users are removed.
This cleans up the kobject code a little bit and removes some
duplicated functionality that confused people (now there is only
one way to do default groups)
Both of these have been in linux-next for all of this week with no
reported problems"
* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kobject: kobj_type: remove default_attrs
powerpc/pseries/vas: use default_groups in kobj_type
Pull locking fixes from Borislav Petkov:
- Allow the compiler to optimize away unused percpu accesses and change
the local_lock_* macros back to inline functions
- A couple of fixes to static call insn patching
* tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "mm/page_alloc: mark pagesets as __maybe_unused"
Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
x86/percpu: Remove volatile from arch_raw_cpu_ptr().
static_call: Remove __DEFINE_STATIC_CALL macro
static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
static_call: Don't make __static_call_return0 static
x86,static_call: Fix __static_call_return0 for i386
Since we are protected from async completions by decrypt_compl_lock
we can drop the async_notify and reinit the completion before we
start waiting.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull gpio fix from Bartosz Golaszewski:
- fix a race condition with consumers accessing the fields of GPIO IRQ
chips before they're fully initialized
* tag 'gpio-fixes-for-v5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: Restrict usage of GPIO chip irq members before initialization
