In S1G beacon frames there shouldn't be multi-BSSID elements
since that's not supported, remove that to avoid a potential
integer underflow and/or misparsing the frames due to the
different length of the fixed part of the frame.
While at it, initialize non_tx_data so we don't send garbage
values to the user (even if it doesn't seem to matter now.)
Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 9eaffe5078 ("cfg80211: convert S1G beacon to scan results")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For vendor elements, the code here assumes that 5 octets
are present without checking. Since the element itself is
already checked to fit, we only need to check the length.
Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-23 (ice)
This series contains updates to ice driver only.
Karol adjusts check of PTP hardware to wait longer but check more often.
Brett removes use of driver defined link speed; instead using the values
from ethtool.h, utilizing static tables for indexing.
Ben adds tracking of stats in order to accumulate reported statistics that
were previously reset by hardware.
Marcin fixes issues setting RXDID when queues are asymmetric.
Anatolii re-introduces use of define over magic number; ICE_RLAN_BASE_S.
---
v3:
- Dropped, previous, patch 2
v2:
Patch 5
- Convert some allocations to non-managed
- Remove combined error checking; add error checks for each call
- Remove excess NULL checks
- Remove unnecessary NULL sets and newlines
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Anirudh Venkataramanan says:
====================
net: Remove uses of kmap_atomic()
kmap_atomic() is being deprecated. This little series replaces the last
few uses of kmap_atomic() in the networking subsystem.
This series triggered a suggestion [1] that perhaps the Sun Cassini,
LDOM Virtual Switch Driver and the LDOM virtual network drivers should be
removed completely. I plan to do this in a follow up patchset. For
completeness, this series still includes kmap_atomic() conversions that
apply to the above referenced drivers. If for some reason we choose to not
remove these drivers, at least they won't be using kmap_atomic() anymore.
Also, the following maintainer entries for the Chelsio driver seem to be
defunct:
Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Rohit Maheshwari <rohitm@chelsio.com>
I can submit a follow up patch to remove these entries, but thought
maybe the folks over at Chelsio would want to look into this first.
Changes v1 -> v2:
Use memcpy_from_page() in patches 2/6 and 4/6
Add new patch for the thunderbolt driver
Update commit messages and cover letter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
kmap_atomic() and kunmap_atomic() with kmap_local_page() and kunmap_local()
respectively.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just kmap_local_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used as opposed to page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
kmap_atomic() and kunmap_atomic() with kmap_local_page() and kunmap_local()
respectively.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just kmap_local_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used as opposed to page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
the map-memcpy-unmap usage pattern (done using k[un]map_atomic()) with
memcpy_from_page(), which internally uses kmap_local_page() and
kunmap_local(). This renders the variable 'vaddr' unnecessary, and so
remove this too.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just memcpy_from_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used (via memcpy_from_page()) as opposed to
page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pages for Rx buffers are allocated in cas_page_alloc() using either
GFP_ATOMIC or GFP_KERNEL. Memory allocated with GFP_KERNEL/GFP_ATOMIC can't
come from highmem and so there's no need to kmap() them. Just use
page_address() instead. This makes the variable 'addr' unnecessary, so
remove it too.
Note that kmap_atomic() disables preemption and page-fault processing,
but page_address() doesn't. When removing uses of kmap_atomic(), one has to
check if the code being executed between the map/unmap implicitly depends
on page-faults and/or preemption being disabled. If yes, then code to
disable page-faults and/or preemption should also be added for functional
correctness. That however doesn't appear to be the case here, so just
page_address() is used.
I don't have hardware, so this change has only been compile tested.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
kmap_atomic() and kunmap_atomic() with kmap_local_page() and kunmap_local()
respectively.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just kmap_local_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used as opposed to page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Cc: Edward Cree <ecree.xilinx@gmail.com>
Cc: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
the map-memcpy-unmap usage pattern (done using k[un]map_atomic()) with
memcpy_from_page(), which internally uses kmap_local_page() and
kunmap_local(). This renders the variables 'data' and 'vaddr' unnecessary,
and so remove these too.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just memcpy_from_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used (via memcpy_from_page()) as opposed to
page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur says:
====================
net: lan966x: Extend xdp support
Extend the current support of XDP in lan966x with the action XDP_TX and
XDP_REDIRECT.
The first patches just prepare the things such that it would be easier
to add XDP_TX and XDP_REDIRECT actions. Like adding XDP_PACKET_HEADROOM,
introduce helper functions, use the correct dma_dir for the page pool
The last 2 patches introduce the XDP actions XDP_TX and XDP_REDIRECT.
v4->v5:
- add iterator declaration inside for loops
- move the scope of port inside the function lan966x_fdma_rx_alloc_page_pool
- create union for skb and xdpf inside struct lan966x_tx_dcb_buf
v3->v4:
- use napi_consume_skb instead of dev_kfree_skb_any
- arrange members in struct lan966x_tx_dcb_buf not to have holes
- fix when xdp program is added the check for determining if page pool
needs to be recreated was wrong
- change type for len in lan966x_tx_dcb_buf to u32
v2->v3:
- make sure to update rxq memory model
- update the page pool direction if there is any xdp program
- in case of action XDP_TX give back to reuse the page
- in case of action XDP_REDIRECT, remap the frame and make sure to
unmap it when is transmitted.
v1->v2:
- use skb_reserve of using skb_put and skb_pull
- make sure that data_len doesn't include XDP_PACKET_HEADROOM
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend lan966x XDP support with the action XDP_REDIRECT. This is similar
with the XDP_TX, so a lot of functionality can be reused.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend lan966x XDP support with the action XDP_TX. In this case when the
received buffer needs to execute XDP_TX, the buffer will be moved to the
TX buffers. So a new RX buffer will be allocated.
When the TX finish with the frame, it would give back the buffer to the
page pool.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To add support for XDP_TX it is required to be able to write to the DMA
area therefore it is required that the pages will be mapped using
DMA_BIDIRECTIONAL flag.
Therefore check if there are any xdp programs on the interfaces and in
that case set DMA_BIDRECTIONAL otherwise use DMA_FROM_DEVICE.
Therefore when a new XDP program is added it is required to redo the
page_pool.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By default the rxq memory model is MEM_TYPE_PAGE_SHARED but to be able
to reuse pages on the TX side, when the XDP action XDP_TX it is required
to update the memory model to PAGE_POOL.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when a frame was transmitted, it is required to unamp the
frame that was transmitted. The length of the frame was taken from the
transmitted skb. In the future we might not have an skb, therefore store
the length skb directly in the lan966x_tx_dcb_buf and use this one to
unamp the frame.
While at this, also arrange the members in lan966x_tx_dcb_buf not to
have any holes.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce lan966x_fdma_tx_setup_dcb and lan966x_fdma_tx_start functions
and use of them inside lan966x_fdma_xmit. There is no functional change
in here.
They are introduced to be used when XDP_TX/REDIRECT actions are
introduced.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the page_pool params to allocate XDP_PACKET_HEADROOM space as
headroom for all received frames.
This is needed for when the XDP_TX and XDP_REDIRECT are implemented.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PEROUT_ENABLE_OUTPUT_MASK was there to allow us to enable/disable
all the perout pins. But it is not standard procedure, we will
have to discard it.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
82P33 family of chips can trigger TOD read/write by external
signal from one of the IN12/13/14 pins, which are set user
space programs by calling PTP_PIN_SETFUNC through ptp_ioctl
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund says:
====================
net: TC protocol all support in Sparx5 IS2 VCAP
This provides support for the TC flower filters 'protocol all' clause in
the Sparx5 IS2 VCAP.
It builds on top of the initial IS2 VCAP support found in these series:
https://lore.kernel.org/all/20221020130904.1215072-1-steen.hegelund@microchip.com/https://lore.kernel.org/all/20221109114116.3612477-1-steen.hegelund@microchip.com/https://lore.kernel.org/all/20221111130519.1459549-1-steen.hegelund@microchip.com/https://lore.kernel.org/all/20221117213114.699375-1-steen.hegelund@microchip.com/
Functionality:
==============
As the configuration for the Sparx5 IS2 VCAP consists of one (or more)
keyset(s) for each lookup/port per traffic classification, it is not
always possible to cover all protocols with just one ordinary VCAP rule.
To improve this situation the driver will try to find out what keysets a
rule will need to cover a TC flower "protocol all" filter and then compare
this set of keysets to what the hardware is currently configured for.
In case multiple keysets are needed then the driver can create a rule per
rule size (e.g. X6 and X12) and use a mask on the keyset type field to
allow the VCAP to match more than one keyset with just one rule.
This is possible because the keysets that have the same size typically has
many keys in common, so the VCAP rule keys can make a common match.
The result is that one TC filter command may create multiple IS2 VCAP rules
of different sizes that have a type field with a masked type id.
Delivery:
=========
This is current plan for delivering the full VCAP feature set of Sparx5:
- Sparx5 IS0 VCAP support
- TC policer and drop action support (depends on the Sparx5 QoS support
upstreamed separately)
- Sparx5 ES0 VCAP support
- TC flower template support
- TC matchall filter support for mirroring and policing ports
- TC flower filter mirror action support
- Sparx5 ES2 VCAP support
Version History:
================
v2 Fixed a NULL return value compiler warning.
Moved the new vcap_find_actionfield function a bit up in the file.
v1 Initial version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This tests the filtering of keys, either dropping unsupported keys or
dropping keys specified in a list.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will display a list of keyset in case the type_id field in the VCAP
rule has been wildcarded.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows support of TC protocol all for the Sparx5 IS2 VCAP.
This is done by creating multiple rules that covers the rule size and
traffic types in the IS2.
Each rule size (e.g X16 and X6) may have multiple keysets and if there are
more than one the type field in the VCAP rule will be wildcarded to support
these keysets.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for making a copy of a rule and modify keys and actions
to differentiate the copy.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the name_assign_type attribute was introduced (commit
685343fc3b, "net: add name_assign_type netdev attribute"), the
loopback device was explicitly mentioned as one which would make use
of NET_NAME_PREDICTABLE:
The name_assign_type attribute gives hints where the interface name of a
given net-device comes from. These values are currently defined:
...
NET_NAME_PREDICTABLE:
The ifname has been assigned by the kernel in a predictable way
that is guaranteed to avoid reuse and always be the same for a
given device. Examples include statically created devices like
the loopback device [...]
Switch to that so that reading /sys/class/net/lo/name_assign_type
produces something sensible instead of returning -EINVAL.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when a FEC device is brought up, the irq coalesce settings
are reset to their default values (1000us, 200 frames). That's
unexpected, and breaks for example use of an appropriate .link file to
make systemd-udev apply the desired
settings (https://www.freedesktop.org/software/systemd/man/systemd.link.html),
or any other method that would do a one-time setup during early boot.
Refactor the code so that fec_restart() instead uses
fec_enet_itr_coal_set(), which simply applies the settings that are
stored in the private data, and initialize that private data with the
default values.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch addresses pfc_alloc_status array overflow occurring for
send queue index value greater than PFC priority. Queue index can be
greater than supported PFC priority for multiple scenarios (e.g. QoS,
during non zero SMQ allocation for a PF/VF).
In those scenarios the API should return default tx scheduler '0'.
This is causing mbox errors as otx2_get_smq_idx returing invalid smq value.
Fixes: 99c969a83d ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, pause frame register GMAC_RX_FLOW_CTRL_RFE is not updated
correctly when 'ethtool -A <IFACE> autoneg off rx off tx off' command
is issued. This fix ensures the flow control change is reflected directly
in the GMAC_RX_FLOW_CTRL_RFE register.
Fixes: 46f69ded98 ("net: stmmac: Use resolved link config in mac_link_up()")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Goh, Wei Sheng <wei.sheng.goh@intel.com>
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPV6 addresses are purged when setting the number of rx/tx
rings using ethtool -G. The function aq_set_ringparam
calls dev_close, which removes the addresses. As a solution,
call an internal function (aq_ndev_close).
Fixes: c1af542795 ("net: aquantia: Ethtool based ring size configuration")
Signed-off-by: Izabela Bakollari <ibakolla@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.
Here, constants for bitmap indices of some configs are defined and these
defines begin with the config's name, and are suffixed with BITMAP_IDX.
To avoid defines prefixed with "CONFIG", name these constants
BITMAP_IDX_FOR_CONFIG_XYZ instead of CONFIG_XYZ_BITMAP_IDX.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The watchdog timer is used to monitor whether the process
of transmitting data is timeout. If we use qlcnic driver,
the dev_watchdog() that is the timer handler of watchdog
timer will call qlcnic_tx_timeout() to process the timeout.
But the qlcnic_tx_timeout() calls msleep(), as a result,
the sleep-in-atomic-context bugs will happen. The processes
are shown below:
(atomic context)
dev_watchdog
qlcnic_tx_timeout
qlcnic_83xx_idc_request_reset
qlcnic_83xx_lock_driver
msleep
---------------------------
(atomic context)
dev_watchdog
qlcnic_tx_timeout
qlcnic_83xx_idc_request_reset
qlcnic_83xx_lock_driver
qlcnic_83xx_recover_driver_lock
msleep
Fix by changing msleep() to mdelay(), the mdelay() is
busy-waiting and the bugs could be mitigated.
Fixes: 629263acae ("qlcnic: 83xx CNA inter driver communication mechanism")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a file zone transitions to the offline or readonly state from an
active state, we must clear the zone active flag and decrement the
active seq file counter. Do so in zonefs_account_active() using the new
zonefs inode flags ZONEFS_ZONE_OFFLINE and ZONEFS_ZONE_READONLY. These
flags are set if necessary in zonefs_check_zone_condition() based on the
result of report zones operation after an IO error.
Fixes: 87c9ce3ffe ("zonefs: Add active seq file accounting")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
We added patch for motorcomm.c to support YT8531S. This patch has
been tested on AM335x platform which has one YT8531S interface
card and passed all test cases.
The tested cases indluding: YT8531S UTP function with support of
10M/100M/1000M; YT8531S Fiber function with support of 100M/1000M;
and YT8531S Combo function that supports auto detection of media type.
Since most functions of YT8531S are similar to YT8521 and we reuse some
codes for YT8521 in the patch file.
Signed-off-by: Frank <Frank.Sae@motor-comm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Kleine-Budde says:
====================
linux-can-fixes-for-6.1-20221124
this is a pull request of 8 patches for net/master.
Ziyang Xuan contributes a patch for the can327, fixing a potential SKB
leak when the netdev is down.
Heiko Schocher's patch for the sja1000 driver fixes the width of the
definition of the OCR_MODE_MASK.
Zhang Changzhong contributes 4 patches. In the sja1000_isa, cc770, and
m_can_pci drivers the error path in the probe() function and in case
of the etas_es58x a function that is called by probe() are fixed.
Jiasheng Jiang add a missing check for the return value of the
devm_clk_get() in the m_can driver.
Yasushi SHOJI's patch for the mcba_usb fixes setting of the external
termination resistor.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 868f9f2f8e ("vfs: fix copy_file_range() regression in cross-fs
copies") removed fallback to generic_copy_file_range() for cross-fs
cases inside vfs_copy_file_range().
To preserve behavior of nfsd and ksmbd server-side-copy, the fallback to
generic_copy_file_range() was added in nfsd and ksmbd code, but that
call is missing sb_start_write(), fsnotify hooks and more.
Ideally, nfsd and ksmbd would pass a flag to vfs_copy_file_range() that
will take care of the fallback, but that code would be subtle and we got
vfs_copy_file_range() logic wrong too many times already.
Instead, add a flag to explicitly request vfs_copy_file_range() to
perform only generic_copy_file_range() and let nfsd and ksmbd use this
flag only in the fallback path.
This choise keeps the logic changes to minimum in the non-nfsd/ksmbd code
paths to reduce the risk of further regressions.
Fixes: 868f9f2f8e ("vfs: fix copy_file_range() regression in cross-fs copies")
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
