Instead of using state->fb->obj[0] directly, get object from framebuffer
by calling drm_gem_fb_get_obj() and return error code when object is
null to avoid using null object of framebuffer.
Fixes: 5d945cbcd4 ("drm/amd/display: Create a file dedicated to planes")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 73dd0ad9e5)
The kernel doc says you need to select manual mode to
adjust this, but the code only allows you to adjust it when
manual mode is not selected. Remove the manual mode check.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bbb05f8a9c)
Cc: stable@vger.kernel.org
In some cases the sink can reset itself after it was configured into MST
mode, without the driver noticing the disconnected state. For instance
the reset may happen in the middle of a modeset, or the (long) HPD pulse
generated may be not long enough for the encoder detect handler to
observe the HPD's deasserted state. In this case the sink's DPCD
register programmed to enable MST will be reset, while the driver still
assumes MST is still enabled. Detect this condition, which will tear
down and recreate/re-enable the MST topology.
v2:
- Add a code comment about adjusting the expected DP_MSTM_CTRL register
value for SST + SideBand. (Suraj, Jani)
- Print a debug message about detecting the link reset. (Jani)
- Verify the DPCD MST state only if it wasn't already determined that
the sink is disconnected.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11195
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823162918.1211875-1-imre.deak@intel.com
(cherry picked from commit 594cf78dc3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
ARL and MTL share a single GSC firmware blob. However, ARL requires a
newer version of it.
So add differentiate of the PCI ids for ARL from MTL and create ARL as
a sub-platform of MTL. That way, all the existing workarounds and such
still treat ARL as MTL exactly as before. However, now the GSC code
can check for ARL and do an extra version check on the firmware before
committing to it.
Also, the version extraction code has various ways of failing but the
return code was being ignore and so the firmware load would attempt to
continue anyway. Fix that by propagating the return code to the next
level out.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: 213c43676b ("drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake")
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802031051.3816392-1-John.C.Harrison@Intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 67733d7a71)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Fixes: f6f4a0862b ("drm/i915/vlv_dsi: Add DMI quirk for backlight control issues on Lenovo Yoga Tab 3 (v2)")
Cc: stable@vger.kernel.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823075055.17198-1-hdegoede@redhat.com
(cherry picked from commit a4dbe45c4c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes for v6.11-rc5
1) Fixes from the virtual plane series, namely
- fix the list of formats for QCM2290 since it has no YUV support
- minor fix in dpu_plane_atomic_check_pipe() to check only for csc and
not csc and scaler while allowing yuv formats
- take rotation into account while allocating virtual planes
2) Fix to cleanup FB if dpu_format_populate_layout() fails. This fixes the
warning splat during DRM file closure
3) Fix to reset the phy link params before re-starting link training. This
fixes the 100% link training failure when someone starts modetest while
cable is connected
4) Long pending fix to fix a visual corruption seen for 4k modes. Root-cause
was we cannot support 4k@30 with 30bpp with 2 lanes so this is a critical
fix to use 24bpp for such cases
5) Fix to move dpu encoder's connector assignment to atomic_enable(). This
fixes the NULL ptr crash for cases when there is an atomic_enable()
without atomic_modeset() after atomic_disable() . This happens for
connectors_changed case of crtc. It fixes a NULL ptr crash reported
during hotplug.
6) Fix to simplify DPU's debug macros without which dynamic debug does not
work as expected
7) Fix the highest bank bit setting for sc7180
8) adreno: fix error return if missing firmware-name
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvxF2p3-AsjUydmSYrA0Vb+Ea7nh3VtNX0pT0Ae_Me-Kw@mail.gmail.com
Wa_15015404425 asks us to perform four "dummy" writes to a
non-existent register offset before every real register read.
Although the specific offset of the writes doesn't directly
matter, the workaround suggests offset 0x130030 as a good target
so that these writes will be easy to recognize and filter out in
debugging traces.
V5(MattR):
- Avoid negating an equality comparison
V4(MattR):
- Use writel and remove xe_reg usage
V3(MattR):
- Define dummy reg local to function
- Avoid tracing dummy writes
- Update commit message
V2:
- Add WA to 8/16/32bit reads also - MattR
- Corrected dummy reg address - MattR
- Use for loop to avoid mental pause - JaniN
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240709155606.2998941-1-tejas.upadhyay@intel.com
(cherry picked from commit 86c5b70a9c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We are checking cp_irq_count from the wrong hdcp structure which
ends up giving timed out errors. We only increment the cp_irq_count
of the primary connector's hdcp structure but here in case of
multidisplay setup we end up checking the secondary connector's hdcp
structure, which will not have its cp_irq_count incremented. This leads
to a timed out at CP_IRQ error even though a CP_IRQ was raised. Extract
it from the correct intel_hdcp structure.
--v2
-Explain why it was the wrong hdcp structure [Jani]
Fixes: 8c9e4f68b8 ("drm/i915/hdcp: Use per-device debugs")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809114127.3940699-2-suraj.kandpal@intel.com
(cherry picked from commit dd92590263)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-ENODEV is used to signify that there is no zap shader for the platform,
and the CPU can directly take the GPU out of secure mode. We want to
use this return code when there is no zap-shader node. But not when
there is, but without a firmware-name property. This case we want to
treat as-if the needed fw is not found.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/604564/
Having two methods to wait on GT TLB invalidations is not ideal. Remove
xe_gt_tlb_invalidation_wait and only use GT TLB invalidation fences.
In addition to two methods being less than ideal, once GT TLB
invalidations are coalesced the seqno cannot be assigned during
xe_gt_tlb_invalidation_ggtt/range. Thus xe_gt_tlb_invalidation_wait
would not have a seqno to wait one. A fence however can be armed and
later signaled.
v3:
- Add explaination about coalescing to commit message
v4:
- Don't put dma fence if defined on stack (CI)
v5:
- Initialize ret to zero (CI)
v6:
- Use invalidation_fence_signal helper in tlb timeout (Matthew Auld)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719172905.1527927-3-matthew.brost@intel.com
(cherry picked from commit 61ac035361)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When validating VF config on the media GT, we may wrongly report
that VF is already partially configured on it, as we consider GGTT
and LMEM provisioning done on the primary GT (since both GGTT and
LMEM are tile-level resources, not a GT-level).
This will cause skipping a VF auto-provisioning on the media-GT and
in result will block a VF from successfully initialize that GT.
Fix that by considering GGTT and LMEM configurations only when
checking if a VF provisioning is complete, and omit GGTT and LMEM
when reporting empty/partial provisioning.
Fixes: 234670cea9 ("drm/xe/pf: Skip fair VFs provisioning if already provisioned")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806180516.618-1-michal.wajdeczko@intel.com
(cherry picked from commit 5bdacb0907)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
