In order to save power, it can be desirable to change the
RX operating mode using OMI to reduce the bandwidth. As the
handshake must be done in the HTC+ field, it cannot be done
by mac80211 directly, so expose functions to the driver to
request and finalize the necessary updates.
Note that RX OMI really only changes what the peer (AP) will
transmit to us, but in order to use it to actually save some
power (by reducing the listen bandwidth) we also update rate
scaling and then the channel context's mindef accordingly.
The updates are split into two in order to sequence them
correctly, when reducing bandwidth first reduce the rate
scaling and thus TX, then send OMI, then reduce the listen
bandwidth (chandef); when increasing bandwidth this is the
other way around. This also requires tracking in different
variables which part is applicable already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.2c1a1934bd73.I4e90fd503504e37f9eac5bdae62e3f07e7071275@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
According to Draft P802.11be_D7.0 clause 35.3.4.2, if a multi-link
request requests an MLD with which an AP corresponding to the
nontransmitted BSSID, the corresponding multi-link probe response
shall carry a basic multi-mink element of that MLD in the frame body
of the multi-link probe response, whose location is outside of the
Multiple BSSID element carried in the frame.
Therefore additional handing is needed for parsing multi-link probe
response and generating the merged elements so that the MLD in the frame
body can be correctly copied to the generated elements. Otherwise, the
nontransmitted BSS looks like non-MLD.
Signed-off-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20241225073725.847062-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the sequence goes like this (among others):
1. flush all stations (including the AP ones) -> this will tell the
drivers to remove the stations
2. notify the driver the vif is not associated.
Which means that in between 1 and 2, the state is that the vif is
associated, but there is no AP station, which makes no sense, and may be
problematic for some drivers (for example iwlwifi)
Change the sequence to:
1. flush the TDLS stations
2. move the AP station to IEEE80211_STA_NONE
3. notify the driver about the vif being unassociated
4. flush the AP station
In order to not break other drivers, add a vif flag to indicate whether
the driver wants to new sequence or not. If the flag is not set, then
things will be done in the old sequence.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241224192322.996ad1be6cb3.I7815d33415aa1d65c0120b54be7a15a45388f807@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The last use of ieee80211_debugfs_key_sta_del() was removed in 2007 by
commit 11a843b7e1 ("[MAC80211]: rework key handling")
The last use of ieee80211_debugfs_key_add_mgmt_default() was removed
in 2010 by
commit f7e0104c1a ("mac80211: support separate default keys")
The last use of ieee80211_debugfs_key_add_beacon_default() was
removed in 2020 by
commit e5473e80d4 ("mac80211: Support BIGTK configuration for Beacon
protection")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241224013257.185742-2-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Steffen Klassert says:
====================
ipsec-next-2025-01-09
1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality.
From Christian Hopps.
2) Support ESN context update to hardware for TX.
From Jianbo Liu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix imbalance between flowtable BIND and UNBIND calls to configure
hardware offload, this fixes a possible kmemleak.
2) Clamp maximum conntrack hashtable size to INT_MAX to fix a possible
WARN_ON_ONCE splat coming from kvmalloc_array(), only possible from
init_netns.
* tag 'nf-25-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: clamp maximum hashtable size to INT_MAX
netfilter: nf_tables: imbalance in flowtable binding
====================
Link: https://patch.msgid.link/20250109123532.41768-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The per-netns structure can be obtained from the table->data using
container_of(), then the 'net' one can be retrieved from the listen
socket (if available).
Fixes: c6a58ffed5 ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-9-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.probe_interval' is
used.
Fixes: d1e462a7a5 ("sctp: add probe_interval in sysctl and sock/asoc/transport")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-8-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, but that would
increase the size of this fix, while 'sctp.ctl_sock' still needs to be
retrieved from 'net' structure.
Fixes: 046c052b47 ("sctp: enable udp tunneling socks")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-7-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, but that would
increase the size of this fix, while 'sctp.ctl_sock' still needs to be
retrieved from 'net' structure.
Fixes: b14878ccb7 ("net: sctp: cache auth_enable per endpoint")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-6-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.rto_min/max' is used.
Fixes: 4f3fdf3bc5 ("sctp: add check rto_min and rto_max in sysctl")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-5-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is
used.
Fixes: 3c68198e75 ("sctp: Make hmac algorithm selection for cookie generation dynamic")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-4-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Even though we fixed a logic error in the commit cited below, syzbot
still managed to trigger an underflow of the per-host bulk flow
counters, leading to an out of bounds memory access.
To avoid any such logic errors causing out of bounds memory accesses,
this commit factors out all accesses to the per-host bulk flow counters
to a series of helpers that perform bounds-checking before any
increments and decrements. This also has the benefit of improving
readability by moving the conditional checks for the flow mode into
these helpers, instead of having them spread out throughout the
code (which was the cause of the original logic error).
As part of this change, the flow quantum calculation is consolidated
into a helper function, which means that the dithering applied to the
ost load scaling is now applied both in the DRR rotation and when a
sparse flow's quantum is first initiated. The only user-visible effect
of this is that the maximum packet size that can be sent while a flow
stays sparse will now vary with +/- one byte in some cases. This should
not make a noticeable difference in practice, and thus it's not worth
complicating the code to preserve the old behaviour.
Fixes: 546ea84d07 ("sched: sch_cake: fix bulk flow accounting logic for host fairness")
Reported-by: syzbot+f63600d288bfb7057424@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Link: https://patch.msgid.link/20250107120105.70685-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus suggested during one of past maintainer summits (in context of
a DMA_BUF discussion) that symbol namespaces can be used to prevent
unwelcome but in-tree code from using all exported functions.
Create a namespace for netdev.
Export netdev_rx_queue_restart(), drivers may want to use it since
it gives them a simple and safe way to restart a queue to apply
config changes. But it's both too low level and too actively developed
to be used outside netdev.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Netlink code depends on NAPI instances being sorted by ID on
the netdev list for dump continuation. We need to be able to
find the position on the list where we left off if dump does
not fit in a single skb, and in the meantime NAPI instances
can come and go.
This was trivially true when we were assigning a new ID to every
new NAPI instance. Since we added the NAPI config API, we try
to retain the ID previously used for the same queue, but still
add the new NAPI instance at the start of the list.
This is fine if we reset the entire netdev and all NAPIs get
removed and added back. If driver replaces a NAPI instance
during an operation like DEVMEM queue reset, or recreates
a subset of NAPI instances in other ways we may end up with
broken ordering, and therefore Netlink dumps with either
missing or duplicated entries.
At this stage the problem is theoretical. Only two drivers
support queue API, bnxt and gve. gve recreates NAPIs during
queue reset, but it doesn't support NAPI config.
bnxt supports NAPI config but doesn't recreate instances
during reset.
We need to save the ID in the config as soon as it is assigned
because otherwise the new NAPI will not know what ID it will
get at enable time, at the time it is being added.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use INT_MAX as maximum size for the conntrack hashtable. Otherwise, it
is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when
resizing hashtable because __GFP_NOWARN is unset. See:
0708a0afe2 ("mm: Consider __GFP_NOWARN flag for oversized kvmalloc() calls")
Note: hashtable resize is only possible from init_netns.
Fixes: 9cc1c73ad6 ("netfilter: conntrack: avoid integer overflow when resizing")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
All these cases cause imbalance between BIND and UNBIND calls:
- Delete an interface from a flowtable with multiple interfaces
- Add a (device to a) flowtable with --check flag
- Delete a netns containing a flowtable
- In an interactive nft session, create a table with owner flag and
flowtable inside, then quit.
Fix it by calling FLOW_BLOCK_UNBIND when unregistering hooks, then
remove late FLOW_BLOCK_UNBIND call when destroying flowtable.
Fixes: ff4bf2f42a ("netfilter: nf_tables: add nft_unregister_flowtable_hook()")
Reported-by: Phil Sutter <phil@nwl.cc>
Tested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In commit 66e4c8d950 ("net: warn if transport header was not set")
I added a debug check in skb_transport_header() to detect
if a caller expects the transport_header to be set to a meaningful
value by a prior code path.
Unfortunately, __netif_receive_skb_core() resets the transport header
to the same value than the network header, defeating this check
in receive paths.
Pretending the transport and network headers are the same
is usually wrong.
This patch removes this reset for CONFIG_DEBUG_NET=y builds
to let fuzzers and CI find bugs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250107144342.499759-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change introduces a mechanism for notifying userspace
applications about changes to IPv6 anycast addresses via netlink. It
includes:
* Addition and deletion of IPv6 anycast addresses are reported using
RTM_NEWANYCAST and RTM_DELANYCAST.
* A new netlink group (RTNLGRP_IPV6_ACADDR) for subscribing to these
notifications.
This enables user space applications(e.g. ip monitor) to efficiently
track anycast addresses through netlink messages, improving metrics
collection and system monitoring. It also unlocks the potential for
advanced anycast management in user space, such as hardware offload
control and fine grained network control.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250107114355.1766086-1-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btmtk: Fix failed to send func ctrl for MediaTek devices.
- hci_sync: Fix not setting Random Address when required
- MGMT: Fix Add Device to responding before completing
- btnxpuart: Fix driver sending truncated data
* tag 'for-net-2025-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btmtk: Fix failed to send func ctrl for MediaTek devices.
Bluetooth: btnxpuart: Fix driver sending truncated data
Bluetooth: MGMT: Fix Add Device to responding before completing
Bluetooth: hci_sync: Fix not setting Random Address when required
====================
Link: https://patch.msgid.link/20250108162627.1623760-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NAPI IDs were not fully exposed to user space prior to the netlink
API, so they were never namespaced. The netlink API must ensure that
at the very least NAPI instance belongs to the same netns as the owner
of the genl sock.
napi_by_id() can become static now, but it needs to move because of
dev_get_by_napi_id().
Cc: stable@vger.kernel.org
Fixes: 1287c1ae0f ("netdev-genl: Support setting per-NAPI config values")
Fixes: 27f91aaf49 ("netdev-genl: Add netlink framework functions for napi")
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250106180137.1861472-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use usb_autopm_get_interface() and usb_autopm_put_interface()
in btmtk_usb_shutdown(), it could send func ctrl after enabling
autosuspend.
Bluetooth: btmtk_usb_hci_wmt_sync() hci0: Execution of wmt command
timed out
Bluetooth: btmtk_usb_shutdown() hci0: Failed to send wmt func ctrl
(-110)
Fixes: 5c5e8c52e3 ("Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Device with LE type requires updating resolving/accept list which
requires quite a number of commands to complete and each of them may
fail, so instead of pretending it would always work this checks the
return of hci_update_passive_scan_sync which indicates if everything
worked as intended.
Fixes: e8907f7654 ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes errors such as the following when Own address type is set to
Random Address but it has not been programmed yet due to either be
advertising or connecting:
< HCI Command: LE Set Exte.. (0x08|0x0041) plen 13
Own address type: Random (0x03)
Filter policy: Ignore not in accept list (0x01)
PHYs: 0x05
Entry 0: LE 1M
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Entry 1: LE Coded
Type: Passive (0x00)
Interval: 180.000 msec (0x0120)
Window: 90.000 msec (0x0090)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Exten.. (0x08|0x0042) plen 6
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Enable (0x08|0x0042) ncmd 1
Status: Invalid HCI Command Parameters (0x12)
Fixes: c45074d68a ("Bluetooth: Fix not generating RPA when required")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
(un)?register_netdevice_notifier_dev_net() hold RTNL before triggering
the notifier for all netdev in the netns.
Let's convert the RTNL to rtnl_net_lock().
Note that move_netdevice_notifiers_dev_net() is assumed to be (but not
yet) protected by per-netns RTNL of both src and dst netns; we need to
convert wireless and hyperv drivers that call dev_change_net_namespace().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250106070751.63146-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(un)?register_netdevice_notifier_net() hold RTNL before triggering the
notifier for all netdev in the netns.
Let's convert the RTNL to rtnl_net_lock().
Note that the per-netns netdev notifier is protected by per-netns RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250106070751.63146-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit d7811e623d ("[NET]: Drop tx lock in dev_watchdog_up")
dev_watchdog_up() became a simple wrapper for __netdev_watchdog_up()
Herbert also said : "In 2.6.19 we can eliminate the unnecessary
__dev_watchdog_up and replace it with dev_watchdog_up."
This patch consolidates things to have only two functions, with
a common prefix.
- netdev_watchdog_up(), exported for the sake of one freescale driver.
This replaces __netdev_watchdog_up() and dev_watchdog_up().
- netdev_watchdog_down(), static to net/sched/sch_generic.c
This replaces dev_watchdog_down().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250105090924.1661822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We've noticed that NFS can hang when using RPC over TLS on an unstable
connection, and investigation shows that the RPC layer is stuck in a tight
loop attempting to transmit, but forever getting -EBADMSG back from the
underlying network. The loop begins when tcp_sendmsg_locked() returns
-EPIPE to tls_tx_records(), but that error is converted to -EBADMSG when
calling the socket's error reporting handler.
Instead of converting errors from tcp_sendmsg_locked(), let's pass them
along in this path. The RPC layer handles -EPIPE by reconnecting the
transport, which prevents the endless attempts to transmit on a broken
connection.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Link: https://patch.msgid.link/9594185559881679d81f071b181a10eb07cd079f.1736004079.git.bcodding@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
