Those cases missed in previous uAPI cleanups were mostly accidentally
brought in from i915 or created to exercise the possibilities of gpuvm
but they are not used by userspace yet, so let's remove them. They can
still be brought back later if needed.
v2:
- Fix XE_VM_FLAG_FAULT_MODE support in xe_lrc.c (Brian Welty)
- Leave DRM_XE_VM_BIND_OP_UNMAP_ALL (José Roberto de Souza)
- Ensure invalid flag values are rejected (Rodrigo Vivi)
v3: Rebase after removal of persistent exec_queues (Francois Dugast)
v4: Rodrigo: Rebase after the new dumpable flag.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222232356.175431-1-rodrigo.vivi@intel.com
Bring changes from drm-misc-next that got merged in drm-next back to
drm-xe so they can be used for additional features.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
drm/i915 feature pull for v6.9:
Features and functionality:
- Early transport for panel replay and PSR (Jouni)
- New ARL PCI IDs (Matt)
- DP TPS4 PHY test pattern support (Khaled)
Refactoring and cleanups:
- Unify and improve VSC SDP for PSR and non-PSR cases (Jouni)
- Refactor memory regions and improve debug logging (Ville)
- Rework global state serialization (Ville)
- Remove unused CDCLK divider fields (Gustavo)
- Unify HDCP connector logging format (Jani)
- Use display instead of graphics version in display code (Jani)
- Move VBT and opregion debugfs next to the implementation (Jani)
- Abstract opregion interface, use opaque type (Jani)
Fixes:
- Fix MTL stolen memory access (Ville)
- Fix initial display plane readout for MTL (Ville)
- Fix HPD handling during driver init/shutdown (Imre)
- Cursor vblank evasion fixes (Ville)
- Various VSC SDP fixes (Jouni)
- Allow PSR mode changes without full modeset (Jouni)
- Fix CDCLK sanitization on module load for Xe2_LPD (Gustavo)
- Fix the max DSC bpc supported by the source (Ankit)
- Add missing LNL ALPM AUX wake configuration (Jouni)
- Cx0 PHY state readout and verify fixes (Mika)
- Fix PSR (panel replay) debugfs for MST connectors (Imre)
- Fail HDCP repeater authentication if Type1 device not present (Suraj)
- Ratelimit debug logging in vm_fault_ttm (Nirmoy)
- Use a fake PCH for MTL because south display is not on the PCH (Haridhar)
- Disable DSB for Xe driver for now (José)
- Fix some LNL display register changes (Lucas)
- Fix build on ChromeOS (Paz Zcharya)
- Preserve current shared DPLL for fastsets on Type-C ports (Ville)
- Fix state checker warnings for MG/TC/TBT PLLs (Ville)
- Fix HDCP repeater ctl register value on errors (Jani)
- Allow FBC with CCS modifiers on SKL+ (Ville)
- Fix HDCP GGTT pinning (Ville)
DRM core changes:
- Add ratelimited drm dbg print (Nirmoy)
- DPCD PSR early transport macro (Jouni)
Merges:
- Backmerge drm-next to bring Xe driver to drm-intel-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87cyt8cxsh.fsf@intel.com
On ARM PCI systems, the PCI hierarchy might be reconfigured during
boot and the firmware framebuffer might move as a result of that.
The values in screen_info will then be invalid.
Work around this problem by tracking the framebuffer's initial
location before it get relocated; then fix the screen_info state
between reloaction and creating the firmware framebuffer's device.
This functionality has been lifted from efifb. See the commit message
of commit 55d728a40d ("efi/fb: Avoid reconfiguration of BAR that
covers the framebuffer") for more information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-8-tzimmermann@suse.de
Set the firmware framebuffer's parent device, which usually is the
graphics hardware's physical device. Integrates the framebuffer in
the Linux device hierarchy and lets Linux handle dependencies among
devices. For example, the graphics hardware won't be suspended while
the firmware device is still active.
v4:
* fix build for CONFIG_SYSFB_SIMPLEFB=n, again
v3:
* fix build for CONFIG_SYSFB_SIMPLEFB=n (Sui)
* test result of screen_info_pci_dev() for errors (Sui)
v2:
* detect parent device in sysfb_parent_dev()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-4-tzimmermann@suse.de
The plain values as stored in struct screen_info need to be decoded
before being used. Add helpers that decode the type of video output
and the framebuffer I/O aperture.
Old or non-x86 systems may not set the type of video directly, but
only indicate the presence by storing 0x01 in orig_video_isVGA. The
decoding logic in screen_info_video_type() takes this into account.
It then follows similar code in vgacon's vgacon_startup() to detect
the video type from the given values.
A call to screen_info_resources() returns all known resources of the
given screen_info. The resources' values have been taken from existing
code in vgacon and vga16fb. These drivers can later be converted to
use the new interfaces.
v2:
* return ssize_t from screen_info_resources()
* don't call __screen_info_has_lfb() unnecessarily
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-2-tzimmermann@suse.de
Backmerging to update drm-misc-next to the state of v6.8-rc3. Also
fixes a build problem with xe.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
and extent handling code"
* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
ext4: make ext4_map_blocks() distinguish delalloc only extent
ext4: add a hole extent entry in cache after punch
ext4: correct the hole length returned by ext4_map_blocks()
ext4: convert to exclusive lock while inserting delalloc extents
ext4: refactor ext4_da_map_blocks()
ext4: remove 'needed' in trace_ext4_discard_preallocations
ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
ext4: remove unused return value of ext4_mb_release_group_pa
ext4: remove unused return value of ext4_mb_release_inode_pa
ext4: remove unused return value of ext4_mb_release
ext4: remove unused ext4_allocation_context::ac_groups_considered
ext4: remove unneeded return value of ext4_mb_release_context
ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
ext4: remove unused return value of __mb_check_buddy
ext4: mark the group block bitmap as corrupted before reporting an error
ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
...
Pull tty and serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.8-rc3 that
resolve a number of reported issues. Included in here are:
- rs485 flag definition fix that affected the user/kernel abi in -rc1
- max310x driver fixes
- 8250_pci1xxxx driver off-by-one fix
- uart_tiocmget locking race fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: max310x: prevent infinite while() loop in port startup
serial: max310x: fail probe if clock crystal is unstable
serial: max310x: improve crystal stable clock detection
serial: max310x: set default value when reading clock ready bit
serial: core: Fix atomicity violation in uart_tiocmget
serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
tty: serial: Fix bit order in RS485 flag definitions
Pull dmaengine fixes from Vinod Koul:
"Core:
- fix return value of is_slave_direction() for D2D dma
Driver fixes for:
- Documentaion fixes to resolve warnings for at_hdmac driver
- bunch of fsl driver fixes for memory leaks, and useless kfree
- TI edma and k3 fixes for packet error and null pointer checks"
* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: at_hdmac: add missing kernel-doc style description
dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
dmaengine: fsl-qdma: Remove a useless devm_kfree()
dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
dmaengine: ti: k3-udma: Report short packet errors
dmaengine: ti: edma: Add some null pointer checks to the edma_probe
dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
dmaengine: at_hdmac: fix some kernel-doc warnings
Pull pci fixes from Bjorn Helgaas:
- Fix a potential deadlock that was reintroduced by an ASPM revert
merged for v6.8 (Johan Hovold)
- Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo
Pieralisi)
* tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer
PCI/ASPM: Fix deadlock when enabling ASPM
Pull sound fixes from Takashi Iwai:
"A collection of fixes, mostly device-specific ones:
- Minor PCM core fix for name strings
- ASoC Qualcomm fixes, including DAI support extensions
- ASoC AMD platform updates
- ASoC Allwinner platform updates
- Various ASoC codec fixes for WSA, WCD, ES8326 drivers
- Various HD-audio and USB-audio fixes and quirks
- A series of fixes for Cirrus CS35L56 codecs"
* tag 'sound-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
ALSA: usb-audio: Ignore clock selector errors for single connection
ALSA: hda/realtek: Enable headset mic on Vaio VJFE-ADL
ALSA: hda: cs35l56: Remove unused test stub function
ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware
ALSA: hda: cs35l56: Fix filename string field layout
ALSA: hda: cs35l56: Fix order of searching for firmware files
ASoC: cs35l56: Allow more time for firmware to boot
ASoC: cs35l56: Load tunings for the correct speaker models
ASoC: cs35l56: Firmware file must match the version of preloaded firmware
ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision
ASoC: cs35l56: Fix for initializing ASP1 mixer registers
ALSA: hda: cs35l56: Initialize all ASP1 registers
ASoC: cs35l56: Fix default SDW TX mixer registers
ASoC: cs35l56: Fix to ensure ASP1 registers match cache
ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed()
ASoC: cs35l56: Don't add the same register patch multiple times
ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp
ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component
ASoC: wm_adsp: Don't overwrite fwf_name with the default
ASoC: wm_adsp: Fix firmware file search order
...
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Remove duplicated enums (Guixen)
- Use appropriate controller state accessors (Keith)
- Retryable authentication (Hannes)
- Add missing module descriptions (Chaitanya)
- Fibre-channel fixes for blktests (Daniel)
- Various type correctness updates (Caleb)
- Improve fabrics connection debugging prints (Nitin)
- Passthrough command verbose error logging (Adam)
- Fix for where we set IO priority in the bio for drivers that use
fops->submit_bio() to queue IO, like md/dm etc.
* tag 'block-6.8-2024-02-01' of git://git.kernel.dk/linux: (32 commits)
block: Fix where bio IO priority gets set
nvme: allow passthru cmd error logging
nvme-fc: show hostnqn when connecting to fc target
nvme-rdma: show hostnqn when connecting to rdma target
nvme-tcp: show hostnqn when connecting to tcp target
nvmet-fc: use RCU list iterator for assoc_list
nvmet-fc: take ref count on tgtport before delete assoc
nvmet-fc: avoid deadlock on delete association path
nvmet-fc: abort command when there is no binding
nvmet-fc: do not tack refs on tgtports from assoc
nvmet-fc: remove null hostport pointer check
nvmet-fc: hold reference on hostport match
nvmet-fc: free queue and assoc directly
nvmet-fc: defer cleanup using RCU properly
nvmet-fc: release reference on target port
nvmet-fcloop: swap the list_add_tail arguments
nvme-fc: do not wait in vain when unloading module
nvme-fc: log human-readable opcode on timeout
nvme: split out fabrics version of nvme_opcode_str()
nvme: take const cmd pointer in read-only helpers
...
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
As Paolo promised we continue to hammer out issues in our selftests.
This is not the end but probably the peak.
Current release - regressions:
- smc: fix incorrect SMC-D link group matching logic
Current release - new code bugs:
- eth: bnxt: silence WARN() when device skips a timestamp, it happens
Previous releases - regressions:
- ipmr: fix null-deref when forwarding mcast packets
- conntrack: evaluate window negotiation only for packets in the
REPLY direction, otherwise SYN retransmissions trigger incorrect
window scale negotiation
- ipset: fix performance regression in swap operation
Previous releases - always broken:
- tcp: add sanity checks to types of pages getting into the rx
zerocopy path, we only support basic NIC -> user, no page cache
pages etc.
- ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
- nt_tables: more input sanitization changes
- dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch
- bridge: mcast: fix loss of snooping after long uptime, jiffies do
wrap on 32bit
- xen-netback: properly sync TX responses, protect with locking
- phy: mediatek-ge-soc: sync calibration values with MediaTek SDK,
increase connection stability
- eth: pds: fixes for various teardown, and reset races
Misc:
- hsr: silence WARN() if we can't alloc supervision frame, it
happens"
* tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
doc/netlink/specs: Add missing attr in rt_link spec
idpf: avoid compiler padding in virtchnl2_ptype struct
selftests: mptcp: join: stop transfer when check is done (part 2)
selftests: mptcp: join: stop transfer when check is done (part 1)
selftests: mptcp: allow changing subtests prefix
selftests: mptcp: decrease BW in simult flows
selftests: mptcp: increase timeout to 30 min
selftests: mptcp: add missing kconfig for NF Mangle
selftests: mptcp: add missing kconfig for NF Filter in v6
selftests: mptcp: add missing kconfig for NF Filter
mptcp: fix data re-injection from stale subflow
selftests: net: enable some more knobs
selftests: net: add missing config for NF_TARGET_TTL
selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
selftests: net: List helper scripts in TEST_FILES Makefile variable
selftests: net: Remove executable bits from library scripts
selftests: bonding: Check initial state
selftests: team: Add missing config options
hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
xen-netback: properly sync TX responses
...
Pull HID fixes from Benjamin Tissoires:
- cleanups in the error path in hid-steam (Dan Carpenter)
- fixes for Wacom tablets selftests that sneaked in while the CI was
taking a break during the year end holidays (Benjamin Tissoires)
- null pointer check in nvidia-shield (Kunwu Chan)
- memory leak fix in hidraw (Su Hui)
- another null pointer fix in i2c-hid-of (Johan Hovold)
- another memory leak fix in HID-BPF this time, as well as a double
fdget() fix reported by Dan Carpenter (Benjamin Tissoires)
- fix for Cirque touchpad when they go on suspend (Kai-Heng Feng)
- new device ID in hid-logitech-hidpp: "Logitech G Pro X SuperLight 2"
(Jiri Kosina)
* tag 'hid-for-linus-2024020101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: bpf: use __bpf_kfunc instead of noinline
HID: bpf: actually free hdev memory after attaching a HID-BPF program
HID: bpf: remove double fdget()
HID: i2c-hid-of: fix NULL-deref on failed power up
HID: hidraw: fix a problem of memory leak in hidraw_release()
HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend
HID: nvidia-shield: Add missing null pointer checks to LED initialization
HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2
selftests/hid: wacom: fix confidence tests
HID: hid-steam: Fix cleanup in probe()
HID: hid-steam: remove pointless error message
Pull lsm fixes from Paul Moore:
"Two small patches to fix some problems relating to LSM hook return
values and how the individual LSMs interact"
* tag 'lsm-pr-20240131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix default return value of the socket_getpeersec_*() hooks
lsm: fix the logic in security_inode_getsecctx()
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) TCP conntrack now only evaluates window negotiation for packets in
the REPLY direction, from Ryan Schaefer. Otherwise SYN retransmissions
trigger incorrect window scale negotiation. From Ryan Schaefer.
2) Restrict tunnel objects to NFPROTO_NETDEV which is where it makes sense
to use this object type.
3) Fix conntrack pick up from the middle of SCTP_CID_SHUTDOWN_ACK packets.
From Xin Long.
4) Another attempt from Jozsef Kadlecsik to address the slow down of the
swap command in ipset.
5) Replace a BUG_ON by WARN_ON_ONCE in nf_log, and consolidate check for
the case that the logger is NULL from the read side lock section.
6) Address lack of sanitization for custom expectations. Restrict layer 3
and 4 families to what it is supported by userspace.
* tag 'nf-24-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations
netfilter: nf_log: replace BUG_ON by WARN_ON_ONCE when putting logger
netfilter: ipset: fix performance regression in swap operation
netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new
netfilter: nf_tables: restrict tunnel object to NFPROTO_NETDEV
netfilter: conntrack: correct window scaling with retransmitted SYN
====================
Link: https://lore.kernel.org/r/20240131225943.7536-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the "spk-id-gpios" property is present it points to GPIOs whose
value must be used to select the correct bin file to match the
speakers.
Some manufacturers use multiple sources of speakers, which need
different tunings for best performance. On these models the type of
speaker fitted is indicated by the values of one or more GPIOs. The
number formed by the GPIOs identifies the tuning required.
The speaker ID must be used in combination with the subsystem ID
(either from PCI SSID or cirrus,firmware-uid property), because the
GPIOs can only indicate variants of a specific model.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1a1c3d794e ("ASoC: cs35l56: Use PCI SSID as the firmware UID")
Link: https://msgid.link/r/20240129162737.497-14-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check during initialization whether the firmware is already patched.
If so, include the firmware version in the wm_adsp fwf_name string.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if FIRMWARE_MISSING == 0.
Including the firmware version in the fwf_name string will
qualify the firmware file name:
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
Preloaded firmware:
cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin]
Where:
[-s] is an optional -s added into the name for a secured CS35L56
VVVVVV is the 24-bit firmware version in hexadecimal.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbd ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-13-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a dummy SUPPLY widget connected to the ASP that forces the
chip registers to match the regmap cache when the ASP is
powered-up.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However. If it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP registers. This means that we can't assume the default
state of the ASP registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
To avoid blocking probe() for several seconds waiting for the
firmware, the silicon defaults are assumed. This allows the machine
driver to setup the ASP configuration during probe() without being
blocked. If the ASP is hooked up and used, the SUPPLY widget
ensures that the chip registers match what was configured in the
regmap cache.
If the machine driver does not hook up the ASP, it is assumed that
it won't call any functions to configure the ASP DAI. Therefore
the regmap cache will be clean for these registers so a
regcache_sync() will not overwrite the chip registers. If the
DAI is not hooked up, the dummy SUPPLY widget will not be
invoked so it will never force-overwrite the chip registers.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
nvme_is_fabrics() and nvme_is_write() only read struct nvme_command,
so take it by const pointer. This allows callers to pass a const pointer
and communicates that these functions don't modify the command.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The patch "netfilter: ipset: fix race condition between swap/destroy
and kernel side add/del/test", commit 28628fa9 fixes a race condition.
But the synchronize_rcu() added to the swap function unnecessarily slows
it down: it can safely be moved to destroy and use call_rcu() instead.
Eric Dumazet pointed out that simply calling the destroy functions as
rcu callback does not work: sets with timeout use garbage collectors
which need cancelling at destroy which can wait. Therefore the destroy
functions are split into two: cancelling garbage collectors safely at
executing the command received by netlink and moving the remaining
part only into the rcu callback.
Link: https://lore.kernel.org/lkml/C0829B10-EAA6-4809-874E-E1E9C05A8D84@automattic.com/
Fixes: 28628fa952 ("netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test")
Reported-by: Ale Crismani <ale.crismani@automattic.com>
Reported-by: David Wang <00107082@163.com>
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Bail out on using the tunnel dst template from other than netdev family.
Add the infrastructure to check for the family in objects.
Fixes: af308b94a2 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.
Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org> # 6.7
Follow the docs at Documentation/bpf/kfuncs.rst:
- declare the function with `__bpf_kfunc`
- disables missing prototype warnings, which allows to remove them from
include/linux/hid-bpf.h
Removing the prototypes is not an issue because we currently have to
redeclare them when writing the BPF program. They will eventually be
generated by bpftool directly AFAIU.
Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-3-052520b1e5e6@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
For these hooks the true "neutral" value is -EOPNOTSUPP, which is
currently what is returned when no LSM provides this hook and what LSMs
return when there is no security context set on the socket. Correct the
value in <linux/lsm_hooks.h> and adjust the dispatch functions in
security/security.c to avoid issues when the BPF LSM is enabled.
Cc: stable@vger.kernel.org
Fixes: 98e828a065 ("security: Refactor declaration of LSM hooks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
