The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process
to read/write registers of another process.
To get/set a register, the API takes an index into an imaginary address
space called the "USER area", where the registers of the process are
laid out in some fashion.
The kernel then maps that index to a particular register in its own data
structures and gets/sets the value.
The API only allows a single machine-word to be read/written at a time.
So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels.
The way floating point registers (FPRs) are addressed is somewhat
complicated, because double precision float values are 64-bit even on
32-bit CPUs. That means on 32-bit kernels each FPR occupies two
word-sized locations in the USER area. On 64-bit kernels each FPR
occupies one word-sized location in the USER area.
Internally the kernel stores the FPRs in an array of u64s, or if VSX is
enabled, an array of pairs of u64s where one half of each pair stores
the FPR. Which half of the pair stores the FPR depends on the kernel's
endianness.
To handle the different layouts of the FPRs depending on VSX/no-VSX and
big/little endian, the TS_FPR() macro was introduced.
Unfortunately the TS_FPR() macro does not take into account the fact
that the addressing of each FPR differs between 32-bit and 64-bit
kernels. It just takes the index into the "USER area" passed from
userspace and indexes into the fp_state.fpr array.
On 32-bit there are 64 indexes that address FPRs, but only 32 entries in
the fp_state.fpr array, meaning the user can read/write 256 bytes past
the end of the array. Because the fp_state sits in the middle of the
thread_struct there are various fields than can be overwritten,
including some pointers. As such it may be exploitable.
It has also been observed to cause systems to hang or otherwise
misbehave when using gdbserver, and is probably the root cause of this
report which could not be easily reproduced:
https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/
Rather than trying to make the TS_FPR() macro even more complicated to
fix the bug, or add more macros, instead add a special-case for 32-bit
kernels. This is more obvious and hopefully avoids a similar bug
happening again in future.
Note that because 32-bit kernels never have VSX enabled the code doesn't
need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to
ensure that 32-bit && VSX is never enabled.
Fixes: 87fec0514f ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds")
Cc: stable@vger.kernel.org # v3.13+
Reported-by: Ariel Miculas <ariel.miculas@belden.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au
The layout of 'struct kvm_vcpu_arch' has evolved significantly since
the initial port of KVM/arm64, so remove the stale comment suggesting
that a prefix of the structure is used exclusively from assembly code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609121223.2551-7-will@kernel.org
has_vhe() expands to a compile-time constant when evaluated from the VHE
or nVHE code, alternatively checking a static key when called from
elsewhere in the kernel. On face value, this looks like a case of
premature optimization, but in fact this allows symbol references on
VHE-specific code paths to be dropped from the nVHE object.
Expand the comment in has_vhe() to make this clearer, hopefully
discouraging anybody from simplifying the code.
Cc: David Brazdil <dbrazdil@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609121223.2551-5-will@kernel.org
A protected VM accessing ID_AA64ISAR2_EL1 gets punished with an UNDEF,
while it really should only get a zero back if the register is not
handled by the hypervisor emulation (as mandated by the architecture).
Introduce all the missing ID registers (including the unallocated ones),
and have them to return 0.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609121223.2551-3-will@kernel.org
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Anup Patel <anup@brainfault.org>
For both ID_AA64SMFR0_EL1.I16I64 and ID_AA64SMFR0_EL1.I8I32 we check for
the presence of the feature by looking for a specific ID value of 0x4 but
should instead be checking for the value 0xf defined by the architecture.
This had no practical effect since we are looking for values >= our define
and the only valid values in the architecture are 0b0000 and 0b1111 so we
would detect things appropriately with the architecture as it stands even
with the incorrect defines.
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: b4adc83b07 ("arm64/sme: System register and exception syndrome definitions")
Link: https://lore.kernel.org/r/20220607165128.2833157-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull KVM fixes from Paolo Bonzini:
- syzkaller NULL pointer dereference
- TDP MMU performance issue with disabling dirty logging
- 5.14 regression with SVM TSC scaling
- indefinite stall on applying live patches
- unstable selftest
- memory leak from wrong copy-and-paste
- missed PV TLB flush when racing with emulation
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: do not report a vCPU as preempted outside instruction boundaries
KVM: x86: do not set st->preempted when going back to user space
KVM: SVM: fix tsc scaling cache logic
KVM: selftests: Make hyperv_clock selftest more stable
KVM: x86/MMU: Zap non-leaf SPTEs when disabling dirty logging
x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm()
KVM: x86/mmu: Check every prev_roots in __kvm_mmu_free_obsolete_roots()
entry/kvm: Exit to user mode when TIF_NOTIFY_SIGNAL is set
KVM: Don't null dereference ops->destroy
A recurrent bug in the KVM/arm64 code base consists in trying to
access the timer pending state outside of the vcpu context, which
makes zero sense (the pending state only exists when the vcpu
is loaded).
In order to avoid more embarassing crashes and catch the offenders
red-handed, add a warning to kvm_arch_timer_get_input_level() and
return the state as non-pending. This avoids taking the system down,
and still helps tracking down silly bugs.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220607131427.1164881-4-maz@kernel.org
Now that GICv2 has a proper userspace accessor for the pending state,
switch GICv3 over to it, dropping the local version, moving over the
specific behaviours that CGIv3 requires (such as the distinction
between pending latch and line level which were never enforced
with GICv2).
We also gain extra locking that isn't really necessary for userspace,
but that's a small price to pay for getting rid of superfluous code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20220607131427.1164881-3-maz@kernel.org
If a vCPU is outside guest mode and is scheduled out, it might be in the
process of making a memory access. A problem occurs if another vCPU uses
the PV TLB flush feature during the period when the vCPU is scheduled
out, and a virtual address has already been translated but has not yet
been accessed, because this is equivalent to using a stale TLB entry.
To avoid this, only report a vCPU as preempted if sure that the guest
is at an instruction boundary. A rescheduling request will be delivered
to the host physical CPU as an external interrupt, so for simplicity
consider any vmexit *not* instruction boundary except for external
interrupts.
It would in principle be okay to report the vCPU as preempted also
if it is sleeping in kvm_vcpu_block(): a TLB flush IPI will incur the
vmentry/vmexit overhead unnecessarily, and optimistic spinning is
also unlikely to succeed. However, leave it for later because right
now kvm_vcpu_check_block() is doing memory accesses. Even
though the TLB flush issue only applies to virtual memory address,
it's very much preferrable to be conservative.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to the Xen path, only change the vCPU's reported state if the vCPU
was actually preempted. The reason for KVM's behavior is that for example
optimistic spinning might not be a good idea if the guest is doing repeated
exits to userspace; however, it is confusing and unlikely to make a difference,
because well-tuned guests will hardly ever exit KVM_RUN in the first place.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This comment block was taken originally from the MIPS architecture code,
where indeed there are particular assumptions one can make regarding SMP
and !SMP and cycle counters. On LoongArch, however, the rdtime family of
functions is always available. As Xuerui wrote:
The rdtime family of instructions is in fact guaranteed to be
available on LoongArch; LoongArch's subsets all contain them, even
the 32-bit "Primary" subset intended for university teaching -- they
provide the rdtimeh.w and rdtimel.w pair of instructions that access
the same 64-bit counter.
So this commit simply removes the incorrect comment block.
Link: https://lore.kernel.org/lkml/e78940bc-9be2-2fe7-026f-9e64a1416c9f@xen0n.name/
Fixes: b738c106f7 ("LoongArch: Add other common headers")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit c5febea095 ("fork: Pass struct kernel_clone_args into
copy_thread") change the prototype of copy_thread(), while commit
5bd2e97c86 ("fork: Generalize PF_IO_WORKER handling") change
the structure of kernel_clone_args. They cause build errors, so fix it.
Fixes: 5bd2e97c86 ("fork: Generalize PF_IO_WORKER handling")
Fixes: c5febea095 ("fork: Pass struct kernel_clone_args into copy_thread")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
1, We assume arch/loongarch/include/asm/smp.h be included in include/
linux/smp.h is valid and the reverse inclusion isn't. So remove the
<linux/smp.h> in arch/loongarch/include/asm/smp.h.
2, arch/loongarch/include/asm/smp.h is only needed when CONFIG_SMP,
and setup.c include it only because it need plat_smp_setup(). So,
reorganize setup.c & smp.h, and then remove <asm/smp.h> in setup.c.
3, Fix cacheinfo.c and percpu.h build error by adding the missing header
files when !CONFIG_SMP.
4, Fix acpi.c build error by adding CONFIG_SMP guards.
5, Move irq_stat definition from smp.c to irq.c and fix its declaration.
6, Select CONFIG_SMP for CONFIG_NUMA, similar as other architectures do.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
syzbot reported an illegal copy_to_user() attempt
from bpf_prog_get_info_by_fd() [1]
There was no repro yet on this bug, but I think
that commit 0aef499f31 ("mm/usercopy: Detect vmalloc overruns")
is exposing a prior bug in bpf arm64.
bpf_prog_get_info_by_fd() looks at prog->jited_len
to determine if the JIT image can be copied out to user space.
My theory is that syzbot managed to get a prog where prog->jited_len
has been set to 43, while prog->bpf_func has ben cleared.
It is not clear why copy_to_user(uinsns, NULL, ulen) is triggering
this particular warning.
I thought find_vma_area(NULL) would not find a vm_struct.
As we do not hold vmap_area_lock spinlock, it might be possible
that the found vm_struct was garbage.
[1]
usercopy: Kernel memory exposure attempt detected from vmalloc (offset 792633534417210172, size 43)!
kernel BUG at mm/usercopy.c:101!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 25002 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-10139-g8291eaafed36 #0
Hardware name: linux,dummy-virt (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usercopy_abort+0x90/0x94 mm/usercopy.c:101
lr : usercopy_abort+0x90/0x94 mm/usercopy.c:89
sp : ffff80000b773a20
x29: ffff80000b773a30 x28: faff80000b745000 x27: ffff80000b773b48
x26: 0000000000000000 x25: 000000000000002b x24: 0000000000000000
x23: 00000000000000e0 x22: ffff80000b75db67 x21: 0000000000000001
x20: 000000000000002b x19: ffff80000b75db3c x18: 00000000fffffffd
x17: 2820636f6c6c616d x16: 76206d6f72662064 x15: 6574636574656420
x14: 74706d6574746120 x13: 2129333420657a69 x12: 73202c3237313031
x11: 3237313434333533 x10: 3336323937207465 x9 : 657275736f707865
x8 : ffff80000a30c550 x7 : ffff80000b773830 x6 : ffff80000b773830
x5 : 0000000000000000 x4 : ffff00007fbbaa10 x3 : 0000000000000000
x2 : 0000000000000000 x1 : f7ff000028fc0000 x0 : 0000000000000064
Call trace:
usercopy_abort+0x90/0x94 mm/usercopy.c:89
check_heap_object mm/usercopy.c:186 [inline]
__check_object_size mm/usercopy.c:252 [inline]
__check_object_size+0x198/0x36c mm/usercopy.c:214
check_object_size include/linux/thread_info.h:199 [inline]
check_copy_size include/linux/thread_info.h:235 [inline]
copy_to_user include/linux/uaccess.h:159 [inline]
bpf_prog_get_info_by_fd.isra.0+0xf14/0xfdc kernel/bpf/syscall.c:3993
bpf_obj_get_info_by_fd+0x12c/0x510 kernel/bpf/syscall.c:4253
__sys_bpf+0x900/0x2150 kernel/bpf/syscall.c:4956
__do_sys_bpf kernel/bpf/syscall.c:5021 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5019 [inline]
__arm64_sys_bpf+0x28/0x40 kernel/bpf/syscall.c:5019
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x48/0x114 arch/arm64/kernel/syscall.c:52
el0_svc_common.constprop.0+0x44/0xec arch/arm64/kernel/syscall.c:142
do_el0_svc+0xa0/0xc0 arch/arm64/kernel/syscall.c:206
el0_svc+0x44/0xb0 arch/arm64/kernel/entry-common.c:624
el0t_64_sync_handler+0x1ac/0x1b0 arch/arm64/kernel/entry-common.c:642
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:581
Code: aa0003e3 d00038c0 91248000 97fff65f (d4210000)
Fixes: db496944fd ("bpf: arm64: add JIT support for multi-function programs")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220531215113.1100754-1-eric.dumazet@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
SVM uses a per-cpu variable to cache the current value of the
tsc scaling multiplier msr on each cpu.
Commit 1ab9287add
("KVM: X86: Add vendor callbacks for writing the TSC multiplier")
broke this caching logic.
Refactor the code so that all TSC scaling multiplier writes go through
a single function which checks and updates the cache.
This fixes the following scenario:
1. A CPU runs a guest with some tsc scaling ratio.
2. New guest with different tsc scaling ratio starts on this CPU
and terminates almost immediately.
This ensures that the short running guest had set the tsc scaling ratio just
once when it was set via KVM_SET_TSC_KHZ. Due to the bug,
the per-cpu cache is not updated.
3. The original guest continues to run, it doesn't restore the msr
value back to its own value, because the cache matches,
and thus continues to run with a wrong tsc scaling ratio.
Fixes: 1ab9287add ("KVM: X86: Add vendor callbacks for writing the TSC multiplier")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606181149.103072-1-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently disabling dirty logging with the TDP MMU is extremely slow.
On a 96 vCPU / 96G VM backed with gigabyte pages, it takes ~200 seconds
to disable dirty logging with the TDP MMU, as opposed to ~4 seconds with
the shadow MMU.
When disabling dirty logging, zap non-leaf parent entries to allow
replacement with huge pages instead of recursing and zapping all of the
child, leaf entries. This reduces the number of TLB flushes required.
and reduces the disable dirty log time with the TDP MMU to ~3 seconds.
Opportunistically add a WARN() to catch GFNs that are mapped at a
higher level than their max level.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220525230904.1584480-1-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As noted (and fixed) a couple of times in the past, "=@cc<cond>" outputs
and clobbering of "cc" don't work well together. The compiler appears to
mean to reject such, but doesn't - in its upstream form - quite manage
to yet for "cc". Furthermore two similar macros don't clobber "cc", and
clobbering "cc" is pointless in asm()-s for x86 anyway - the compiler
always assumes status flags to be clobbered there.
Fixes: 989b5db215 ("x86/uaccess: Implement macros for CMPXCHG on user addresses")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Message-Id: <485c0c0b-a3a7-0b7c-5264-7d00c01de032@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since 5bfa685e62 ("KVM: arm64: vgic: Read HW interrupt pending state
from the HW"), we're able to source the pending bit for an interrupt
that is stored either on the physical distributor or on a device.
However, this state is only available when the vcpu is loaded,
and is not intended to be accessed from userspace. Unfortunately,
the GICv2 emulation doesn't provide specific userspace accessors,
and we fallback with the ones that are intended for the guest,
with fatal consequences.
Add a new vgic_uaccess_read_pending() accessor for userspace
to use, build on top of the existing vgic_mmio_read_pending().
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 5bfa685e62 ("KVM: arm64: vgic: Read HW interrupt pending state from the HW")
Link: https://lore.kernel.org/r/20220607131427.1164881-2-maz@kernel.org
Cc: stable@vger.kernel.org
On each vcpu load, we set the KVM_ARM64_HOST_SME_ENABLED
flag if SME is enabled for EL0 on the host. This is used to
restore the correct state on vpcu put.
However, it appears that nothing ever clears this flag. Once
set, it will stick until the vcpu is destroyed, which has the
potential to spuriously enable SME for userspace. As it turns
out, this is due to the SME code being more or less copied from
SVE, and inheriting the same shortcomings.
We never saw the issue because nothing uses SME, and the amount
of testing is probably still pretty low.
Fixes: 861262ab86 ("KVM: arm64: Handle SME host state when running guests")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviwed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220528113829.1043361-3-maz@kernel.org
On each vcpu load, we set the KVM_ARM64_HOST_SVE_ENABLED
flag if SVE is enabled for EL0 on the host. This is used to restore
the correct state on vpcu put.
However, it appears that nothing ever clears this flag. Once
set, it will stick until the vcpu is destroyed, which has the
potential to spuriously enable SVE for userspace.
We probably never saw the issue because no VMM uses SVE, but
that's still pretty bad. Unconditionally clearing the flag
on vcpu load addresses the issue.
Fixes: 8383741ab2 ("KVM: arm64: Get rid of host SVE tracking/saving")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220528113829.1043361-2-maz@kernel.org
The file-wide OBJECT_FILES_NON_STANDARD annotation is used with
CONFIG_FRAME_POINTER to tell objtool to skip the entire file when frame
pointers are enabled. However that annotation is now deprecated because
it doesn't work with IBT, where objtool runs on vmlinux.o instead of
individual translation units.
Instead, use more fine-grained function-specific annotations:
- The 'save_mcount_regs' macro does funny things with the frame pointer.
Use STACK_FRAME_NON_STANDARD_FP to tell objtool to ignore the
functions using it.
- The return_to_handler() "function" isn't actually a callable function.
Instead of being called, it's returned to. The real return address
isn't on the stack, so unwinding is already doomed no matter which
unwinder is used. So just remove the STT_FUNC annotation, telling
objtool to ignore it. That also removes the implicit
ANNOTATE_NOENDBR, which now needs to be made explicit.
Fixes the following warning:
vmlinux.o: warning: objtool: __fentry__+0x16: return with modified stack frame
Fixes: ed53a0d971 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/b7a7a42fe306aca37826043dac89e113a1acdbac.1654268610.git.jpoimboe@kernel.org
Instead of using arch_has_restricted_virtio_memory_access() together
with CONFIG_ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS, replace those
with platform_has() and a new platform feature
PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Borislav Petkov <bp@suse.de>
You cannot include <generated/compile.h> here because it is generated
in init/Makefile but there is no guarantee that it happens before
arch/powerpc/mm/nohash/kaslr_booke.c is compiled for parallel builds.
The places where you can reliably include <generated/compile.h> are:
- init/ (because init/Makefile can specify the dependency)
- arch/*/boot/ (because it is compiled after vmlinux)
Commit f231e43333 ("hexagon: get rid of #include <generated/compile.h>")
fixed the last breakage at that time, but powerpc re-added this.
<generated/compile.h> was unneeded because 'build_str' is almost the
same as 'linux_banner' defined in init/version.c
Let's copy the solution from MIPS.
(get_random_boot() in arch/mips/kernel/relocate.c)
Fixes: 6a38ea1d7b ("powerpc/fsl_booke/32: randomize the kernel image offset")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220604085050.4078927-1-masahiroy@kernel.org
Pull mm hotfixes from Andrew Morton:
"Fixups for various recently-added and longer-term issues and a few
minor tweaks:
- fixes for material merged during this merge window
- cc:stable fixes for more longstanding issues
- minor mailmap and MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery
x86/kexec: fix memory leak of elf header buffer
mm/memremap: fix missing call to untrack_pfn() in pagemap_range()
mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock()
mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON
MAINTAINERS: add maintainer information for z3fold
mailmap: update Josh Poimboeuf's email
Pull x86 SGX fix from Thomas Gleixner:
"A single fix for x86/SGX to prevent that memory which is allocated for
an SGX enclave is accounted to the wrong memory control group"
* tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Set active memcg prior to shmem allocation
Pull x86 mm cleanup from Thomas Gleixner:
"Use PAGE_ALIGNED() instead of open coding it in the x86/mm code"
* tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
Pull x86 microcode updates from Thomas Gleixner:
- Disable late microcode loading by default. Unless the HW people get
their act together and provide a required minimum version in the
microcode header for making a halfways informed decision its just
lottery and broken.
- Warn and taint the kernel when microcode is loaded late
- Remove the old unused microcode loader interface
- Remove a redundant perf callback from the microcode loader
* tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Remove unnecessary perf callback
x86/microcode: Taint and warn on late loading
x86/microcode: Default-disable late loading
x86/microcode: Rip out the OLD_INTERFACE
Pull x86 cleanups from Thomas Gleixner:
"A set of small x86 cleanups:
- Remove unused headers in the IDT code
- Kconfig indendation and comment fixes
- Fix all 'the the' typos in one go instead of waiting for bots to
fix one at a time"
* tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix all occurences of the "the the" typo
x86/idt: Remove unused headers
x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
Pull x86 boot update from Thomas Gleixner:
"Use strlcpy() instead of strscpy() in arch_setup()"
* tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/setup: Use strscpy() to replace deprecated strlcpy()
Pull perf fixes from Thomas Gleixner:
- Make the ICL event constraints match reality
- Remove a unused local variable
* tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Remove unused local variable
perf/x86/intel: Fix event constraints for ICL
Pull perf fixlet from Thomas Gleixner:
"Trivial indentation fix in Kconfig"
* tag 'perf-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/Kconfig: Fix indentation in the Kconfig file
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
Pull more Kbuild updates from Masahiro Yamada:
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old
tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: Allow to select bash in a modified environment
scripts: kconfig: nconf: make nconfig accept jk keybindings
modpost: use fnmatch() to simplify match()
modpost: simplify mod->name allocation
kbuild: factor out the common objtool arguments
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
kbuild: clean .tmp_* pattern by make clean
kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
kbuild: rebuild multi-object modules when objtool is updated
kbuild: add cmd_and_savecmd macro
kbuild: make *.mod rule robust against too long argument error
kbuild: make built-in.a rule robust against too long argument error
kbuild: check static EXPORT_SYMBOL* by script instead of modpost
parisc: remove arch/parisc/nm
kbuild: do not create *.prelink.o for Clang LTO or IBT
kbuild: replace $(linked-object) with CONFIG options
kbuild: do not try to parse *.cmd files for objects provided by compiler
kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
modpost: squash if...else-if in find_elf_symbol2()
modpost: reuse ARRAY_SIZE() macro for section_mismatch()
...
Pull mount handling updates from Al Viro:
"Cleanups (and one fix) around struct mount handling.
The fix is usermode_driver.c one - once you've done kern_mount(), you
must kern_unmount(); simple mntput() will end up with a leak. Several
failure exits in there messed up that way... In practice you won't hit
those particular failure exits without fault injection, though"
* tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move mount-related externs from fs.h to mount.h
blob_to_mnt(): kern_unmount() is needed to undo kern_mount()
m->mnt_root->d_inode->i_sb is a weird way to spell m->mnt_sb...
linux/mount.h: trim includes
uninline may_mount() and don't opencode it in fspick(2)/fsopen(2)
Pull bitmap updates from Yury Norov:
- bitmap: optimize bitmap_weight() usage, from me
- lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro
Carvalho Chehab
- include/linux/find: Fix documentation, from Anna-Maria Behnsen
- bitmap: fix conversion from/to fix-sized arrays, from me
- bitmap: Fix return values to be unsigned, from Kees Cook
It has been in linux-next for at least a week with no problems.
* tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits)
nodemask: Fix return values to be unsigned
bitmap: Fix return values to be unsigned
KVM: x86: hyper-v: replace bitmap_weight() with hweight64()
KVM: x86: hyper-v: fix type of valid_bank_mask
ia64: cleanup remove_siblinginfo()
drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate
KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate
lib/bitmap: add test for bitmap_{from,to}_arr64
lib: add bitmap_{from,to}_arr64
lib/bitmap: extend comment for bitmap_(from,to)_arr32()
include/linux/find: Fix documentation
lib/bitmap.c make bitmap_print_bitmask_to_buf parseable
MAINTAINERS: add cpumask and nodemask files to BITMAP_API
arch/x86: replace nodes_weight with nodes_empty where appropriate
mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate
clocksource: replace cpumask_weight with cpumask_empty in clocksource.c
genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate
irq: mips: replace cpumask_weight with cpumask_empty where appropriate
drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate
arch/x86: replace cpumask_weight with cpumask_empty where appropriate
...
Pull more parisc architecture updates from Helge Deller:
"A fix to prevent crash at bootup if CONFIG_SCHED_MC is enabled, and
add auto-detection of primary graphics card for framebuffer driver"
* tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/stifb: Keep track of hardware path of graphics card
parisc/stifb: Implement fb_is_primary_device()
parisc: fix a crash with multicore scheduler
Pull more xen updates from Juergen Gross:
"Two cleanup patches for Xen related code and (more important) an
update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step
down"
* tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: replace xen_remap() with memremap()
MAINTAINERS: Update Xen maintainership
xen: switch gnttab_end_foreign_access() to take a struct page pointer
Implement fb_is_primary_device() function, so that fbcon detects if this
framebuffer belongs to the default graphics card which was used to start
the system.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Pull ptrace_stop cleanups from Eric Biederman:
"While looking at the ptrace problems with PREEMPT_RT and the problems
Peter Zijlstra was encountering with ptrace in his freezer rewrite I
identified some cleanups to ptrace_stop that make sense on their own
and move make resolving the other problems much simpler.
The biggest issue is the habit of the ptrace code to change
task->__state from the tracer to suppress TASK_WAKEKILL from waking up
the tracee. No other code in the kernel does that and it is straight
forward to update signal_wake_up and friends to make that unnecessary.
Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and
then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying
on the fact that all stopped states except the special stop states can
tolerate spurious wake up and recover their state.
The state of stopped and traced tasked is changed to be stored in
task->jobctl as well as in task->__state. This makes it possible for
the freezer to recover tasks in these special states, as well as
serving as a general cleanup. With a little more work in that
direction I believe TASK_STOPPED can learn to tolerate spurious wake
ups and become an ordinary stop state.
The TASK_TRACED state has to remain a special state as the registers
for a process are only reliably available when the process is stopped
in the scheduler. Fundamentally ptrace needs acess to the saved
register values of a task.
There are bunch of semi-random ptrace related cleanups that were found
while looking at these issues.
One cleanup that deserves to be called out is from commit 57b6de08b5
("ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs"). This
makes a change that is technically user space visible, in the handling
of what happens to a tracee when a tracer dies unexpectedly. According
to our testing and our understanding of userspace nothing cares that
spurious SIGTRAPs can be generated in that case"
* tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state
ptrace: Always take siglock in ptrace_resume
ptrace: Don't change __state
ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs
ptrace: Document that wait_task_inactive can't fail
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
signal: Use lockdep_assert_held instead of assert_spin_locked
ptrace: Remove arch_ptrace_attach
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
signal: Replace __group_send_sig_info with send_signal_locked
signal: Rename send_signal send_signal_locked
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
Pull UML updates from Richard Weinberger:
- Various cleanups and fixes: xterm, serial line, time travel
- Set ARCH_HAS_GCOV_PROFILE_ALL
* tag 'for-linus-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix out-of-bounds read in LDT setup
um: chan_user: Fix winch_tramp() return value
um: virtio_uml: Fix broken device handling in time-travel
um: line: Use separate IRQs per line
um: Enable ARCH_HAS_GCOV_PROFILE_ALL
um: Use asm-generic/dma-mapping.h
um: daemon: Make default socket configurable
um: xterm: Make default terminal emulator configurable
