Pull arm64 fixes from Catalin Marinas:
- Revert the moving of the jump labels initialisation before
setup_machine_fdt(). The bug was fixed in drivers/char/random.c.
- Ftrace fixes: branch range check and consistent handling of PLTs.
- Clean rather than invalidate FROM_DEVICE buffers at start of DMA
transfer (safer if such buffer is mapped in user space). A cache
invalidation is done already at the end of the transfer.
- A couple of clean-ups (unexport symbol, remove unused label).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Don't invalidate FROM_DEVICE buffers at start of DMA transfer
arm64/cpufeature: Unexport set_cpu_feature()
arm64: ftrace: remove redundant label
arm64: ftrace: consistently handle PLTs.
arm64: ftrace: fix branch range checks
Revert "arm64: Initialize jump labels before setup_machine_fdt()"
Invalidating the buffer memory in arch_sync_dma_for_device() for
FROM_DEVICE transfers
When using the streaming DMA API to map a buffer prior to inbound
non-coherent DMA (i.e. DMA_FROM_DEVICE), we invalidate any dirty CPU
cachelines so that they will not be written back during the transfer and
corrupt the buffer contents written by the DMA. This, however, poses two
potential problems:
(1) If the DMA transfer does not write to every byte in the buffer,
then the unwritten bytes will contain stale data once the transfer
has completed.
(2) If the buffer has a virtual alias in userspace, then stale data
may be visible via this alias during the period between performing
the cache invalidation and the DMA writes landing in memory.
Address both of these issues by cleaning (aka writing-back) the dirty
lines in arch_sync_dma_for_device(DMA_FROM_DEVICE) instead of discarding
them using invalidation.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606152150.GA31568@willie-the-truck
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220610151228.4562-2-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We currently export set_cpu_feature() to modules but there are no in tree
users that can be built as modules and it is hard to see cases where it
would make sense for there to be any such users. Remove the export to avoid
anyone else having to worry about why it is there and ensure that any users
that do get added get a bit more visiblity.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220615191504.626604-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Sometimes it is necessary to use a PLT entry to call an ftrace
trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(),
with each having *almost* identical logic, but this is not handled by
ftrace_modify_call() since its introduction in commit:
3b23e4991f ("arm64: implement ftrace with regs")
Due to this, if we ever were to call ftrace_modify_call() for a callsite
which requires a PLT entry for a trampoline, then either:
a) If the old addr requires a trampoline, ftrace_modify_call() will use
an out-of-range address to generate the 'old' branch instruction.
This will result in warnings from aarch64_insn_gen_branch_imm() and
ftrace_modify_code(), and no instructions will be modified. As
ftrace_modify_call() will return an error, this will result in
subsequent internal ftrace errors.
b) If the old addr does not require a trampoline, but the new addr does,
ftrace_modify_call() will use an out-of-range address to generate the
'new' branch instruction. This will result in warnings from
aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace
the 'old' branch with a BRK. This will result in a kernel panic when
this BRK is later executed.
Practically speaking, case (a) is vastly more likely than case (b), and
typically this will result in internal ftrace errors that don't
necessarily affect the rest of the system. This can be demonstrated with
an out-of-tree test module which triggers ftrace_modify_call(), e.g.
| # insmod test_ftrace.ko
| test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024
| branch_imm_common: offset out of range
| branch_imm_common: offset out of range
| ------------[ ftrace bug ]------------
| ftrace failed to modify
| [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace]
| actual: 1d:00:00:94
| Updating ftrace call site to call a different ftrace function
| ftrace record flags: e0000002
| (2) R
| expected tramp: ffffb374ae42ed54
| ------------[ cut here ]------------
| WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0
| Modules linked in: test_ftrace(+)
| CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13
| Hardware name: linux,dummy-virt (DT)
| pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : ftrace_bug+0x280/0x2b0
| lr : ftrace_bug+0x280/0x2b0
| sp : ffff80000839ba00
| x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0
| x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000
| x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8
| x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff
| x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4
| x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666
| x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8
| x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167
| x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022
| Call trace:
| ftrace_bug+0x280/0x2b0
| ftrace_replace_code+0x98/0xa0
| ftrace_modify_all_code+0xe0/0x144
| arch_ftrace_update_code+0x14/0x20
| ftrace_startup+0xf8/0x1b0
| register_ftrace_function+0x38/0x90
| test_ftrace_init+0xd0/0x1000 [test_ftrace]
| do_one_initcall+0x50/0x2b0
| do_init_module+0x50/0x1f0
| load_module+0x17c8/0x1d64
| __do_sys_finit_module+0xa8/0x100
| __arm64_sys_finit_module+0x2c/0x3c
| invoke_syscall+0x50/0x120
| el0_svc_common.constprop.0+0xdc/0x100
| do_el0_svc+0x3c/0xd0
| el0_svc+0x34/0xb0
| el0t_64_sync_handler+0xbc/0x140
| el0t_64_sync+0x18c/0x190
| ---[ end trace 0000000000000000 ]---
We can solve this by consistently determining whether to use a PLT entry
for an address.
Note that since (the earlier) commit:
f1a54ae9af ("arm64: module/ftrace: intialize PLT at load time")
... we can consistently determine the PLT address that a given callsite
will use, and therefore ftrace_make_nop() does not need to skip
validation when a PLT is in use.
This patch factors the existing logic out of ftrace_make_call() and
ftrace_make_nop() into a common ftrace_find_callable_addr() helper
function, which is used by ftrace_make_call(), ftrace_make_nop(), and
ftrace_modify_call(). In ftrace_make_nop() the patching is consistently
validated by ftrace_modify_code() as we can always determine what the
old instruction should have been.
Fixes: 3b23e4991f ("arm64: implement ftrace with regs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614080944.1349146-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The branch range checks in ftrace_make_call() and ftrace_make_nop() are
incorrect, erroneously permitting a forwards branch of 128M and
erroneously rejecting a backwards branch of 128M.
This is because both functions calculate the offset backwards,
calculating the offset *from* the target *to* the branch, rather than
the other way around as the later comparisons expect.
If an out-of-range branch were erroeously permitted, this would later be
rejected by aarch64_insn_gen_branch_imm() as branch_imm_common() checks
the bounds correctly, resulting in warnings and the placement of a BRK
instruction. Note that this can only happen for a forwards branch of
exactly 128M, and so the caller would need to be exactly 128M bytes
below the relevant ftrace trampoline.
If an in-range branch were erroeously rejected, then:
* For modules when CONFIG_ARM64_MODULE_PLTS=y, this would result in the
use of a PLT entry, which is benign.
Note that this is the common case, as this is selected by
CONFIG_RANDOMIZE_BASE (and therefore RANDOMIZE_MODULE_REGION_FULL),
which distributions typically seelct. This is also selected by
CONFIG_ARM64_ERRATUM_843419.
* For modules when CONFIG_ARM64_MODULE_PLTS=n, this would result in
internal ftrace failures.
* For core kernel text, this would result in internal ftrace failues.
Note that for this to happen, the kernel text would need to be at
least 128M bytes in size, and typical configurations are smaller tha
this.
Fix this by calculating the offset *from* the branch *to* the target in
both functions.
Fixes: f8af0b364e ("arm64: ftrace: don't validate branch via PLT in ftrace_make_nop()")
Fixes: e71a4e1beb ("arm64: ftrace: add support for far branches to dynamic ftrace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614080944.1349146-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This reverts commit 73e2d827a5.
The reverted patch was needed as a fix after commit f5bda35fba
("random: use static branch for crng_ready()"). However, this was
already fixed by 60e5b2886b ("random: do not use jump labels before
they are initialized") and hence no longer necessary to initialise jump
labels before setup_machine_fdt().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull kvm fixes from Paolo Bonzini:
"While last week's pull request contained miscellaneous fixes for x86,
this one covers other architectures, selftests changes, and a bigger
series for APIC virtualization bugs that were discovered during 5.20
development. The idea is to base 5.20 development for KVM on top of
this tag.
ARM64:
- Properly reset the SVE/SME flags on vcpu load
- Fix a vgic-v2 regression regarding accessing the pending state of a
HW interrupt from userspace (and make the code common with vgic-v3)
- Fix access to the idreg range for protected guests
- Ignore 'kvm-arm.mode=protected' when using VHE
- Return an error from kvm_arch_init_vm() on allocation failure
- A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
- Typo fix in arch/riscv/kvm/vmid.c
- Remove broken reference pattern from MAINTAINERS entry
x86-64:
- Fix error in page tables with MKTME enabled
- Dirty page tracking performance test extended to running a nested
guest
- Disable APICv/AVIC in cases that it cannot implement correctly"
[ This merge also fixes a misplaced end parenthesis bug introduced in
commit 3743c2f025 ("KVM: x86: inhibit APICv/AVIC on changes to APIC
ID or APIC base") pointed out by Sean Christopherson ]
Link: https://lore.kernel.org/all/20220610191813.371682-1-seanjc@google.com/
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
KVM: selftests: Restrict test region to 48-bit physical addresses when using nested
KVM: selftests: Add option to run dirty_log_perf_test vCPUs in L2
KVM: selftests: Clean up LIBKVM files in Makefile
KVM: selftests: Link selftests directly with lib object files
KVM: selftests: Drop unnecessary rule for STATIC_LIBS
KVM: selftests: Add a helper to check EPT/VPID capabilities
KVM: selftests: Move VMX_EPT_VPID_CAP_AD_BITS to vmx.h
KVM: selftests: Refactor nested_map() to specify target level
KVM: selftests: Drop stale function parameter comment for nested_map()
KVM: selftests: Add option to create 2M and 1G EPT mappings
KVM: selftests: Replace x86_page_size with PG_LEVEL_XX
KVM: x86: SVM: fix nested PAUSE filtering when L0 intercepts PAUSE
KVM: x86: SVM: drop preempt-safe wrappers for avic_vcpu_load/put
KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking
KVM: x86: disable preemption while updating apicv inhibition
KVM: x86: SVM: fix avic_kick_target_vcpus_fast
KVM: x86: SVM: remove avic's broken code that updated APIC ID
KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base
KVM: x86: document AVIC/APICv inhibit reasons
KVM: x86/mmu: Set memory encryption "value", not "mask", in shadow PDPTRs
...
Pull arm64 fixes from Catalin Marinas:
- SME save/restore for EFI fix - incorrect logic for detecting the need
for saving/restoring the FFR state.
- SME fix for a CPU ID field value.
- Sysreg generation awk script fix (comparison operator).
- Some typos in documentation or comments and silence a sparse warning
(missing prototype).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add kasan_hw_tags_enable() prototype to silence sparse
arm64/sme: Fix EFI save/restore
arm64/fpsimd: Fix typo in comment
arm64/sysreg: Fix typo in Enum element regex
arm64/sme: Fix SVE/SME typo in ABI documentation
arm64/sme: Fix tests for 0b1111 value ID registers
This function is only called from assembly, no need for a prototype
declaration in a header file. In addition, add #ifdef around the
function since it is only used when CONFIG_KASAN_HW_TAGS.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Pull xen updates from Juergen Gross:
- a small cleanup removing "export" of an __init function
- a small series adding a new infrastructure for platform flags
- a series adding generic virtio support for Xen guests (frontend side)
* tag 'for-linus-5.19a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: unexport __init-annotated xen_xlate_map_ballooned_pages()
arm/xen: Assign xen-grant DMA ops for xen-grant DMA devices
xen/grant-dma-ops: Retrieve the ID of backend's domain for DT devices
xen/grant-dma-iommu: Introduce stub IOMMU driver
dt-bindings: Add xen,grant-dma IOMMU description for xen-grant DMA ops
xen/virtio: Enable restricted memory access using Xen grant mappings
xen/grant-dma-ops: Add option to restrict memory access under Xen
xen/grants: support allocating consecutive grants
arm/xen: Introduce xen_setup_dma_ops()
virtio: replace arch_has_restricted_virtio_memory_access()
kernel: add platform_has() infrastructure
The EFI save/restore code is confused. When saving the check for saving
FFR is inverted due to confusion with the streaming mode check, and when
restoring we check if we need to restore FFR by checking the percpu
efi_sm_state without the required wrapper rather than based on the
combination of FA64 support and streaming mode.
Fixes: e0838f6373 ("arm64/sme: Save and restore streaming mode over EFI runtime calls")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602124132.3528951-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The layout of 'struct kvm_vcpu_arch' has evolved significantly since
the initial port of KVM/arm64, so remove the stale comment suggesting
that a prefix of the structure is used exclusively from assembly code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609121223.2551-7-will@kernel.org
has_vhe() expands to a compile-time constant when evaluated from the VHE
or nVHE code, alternatively checking a static key when called from
elsewhere in the kernel. On face value, this looks like a case of
premature optimization, but in fact this allows symbol references on
VHE-specific code paths to be dropped from the nVHE object.
Expand the comment in has_vhe() to make this clearer, hopefully
discouraging anybody from simplifying the code.
Cc: David Brazdil <dbrazdil@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609121223.2551-5-will@kernel.org
A protected VM accessing ID_AA64ISAR2_EL1 gets punished with an UNDEF,
while it really should only get a zero back if the register is not
handled by the hypervisor emulation (as mandated by the architecture).
Introduce all the missing ID registers (including the unallocated ones),
and have them to return 0.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609121223.2551-3-will@kernel.org
For both ID_AA64SMFR0_EL1.I16I64 and ID_AA64SMFR0_EL1.I8I32 we check for
the presence of the feature by looking for a specific ID value of 0x4 but
should instead be checking for the value 0xf defined by the architecture.
This had no practical effect since we are looking for values >= our define
and the only valid values in the architecture are 0b0000 and 0b1111 so we
would detect things appropriately with the architecture as it stands even
with the incorrect defines.
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: b4adc83b07 ("arm64/sme: System register and exception syndrome definitions")
Link: https://lore.kernel.org/r/20220607165128.2833157-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A recurrent bug in the KVM/arm64 code base consists in trying to
access the timer pending state outside of the vcpu context, which
makes zero sense (the pending state only exists when the vcpu
is loaded).
In order to avoid more embarassing crashes and catch the offenders
red-handed, add a warning to kvm_arch_timer_get_input_level() and
return the state as non-pending. This avoids taking the system down,
and still helps tracking down silly bugs.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220607131427.1164881-4-maz@kernel.org
Now that GICv2 has a proper userspace accessor for the pending state,
switch GICv3 over to it, dropping the local version, moving over the
specific behaviours that CGIv3 requires (such as the distinction
between pending latch and line level which were never enforced
with GICv2).
We also gain extra locking that isn't really necessary for userspace,
but that's a small price to pay for getting rid of superfluous code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20220607131427.1164881-3-maz@kernel.org
syzbot reported an illegal copy_to_user() attempt
from bpf_prog_get_info_by_fd() [1]
There was no repro yet on this bug, but I think
that commit 0aef499f31 ("mm/usercopy: Detect vmalloc overruns")
is exposing a prior bug in bpf arm64.
bpf_prog_get_info_by_fd() looks at prog->jited_len
to determine if the JIT image can be copied out to user space.
My theory is that syzbot managed to get a prog where prog->jited_len
has been set to 43, while prog->bpf_func has ben cleared.
It is not clear why copy_to_user(uinsns, NULL, ulen) is triggering
this particular warning.
I thought find_vma_area(NULL) would not find a vm_struct.
As we do not hold vmap_area_lock spinlock, it might be possible
that the found vm_struct was garbage.
[1]
usercopy: Kernel memory exposure attempt detected from vmalloc (offset 792633534417210172, size 43)!
kernel BUG at mm/usercopy.c:101!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 25002 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-10139-g8291eaafed36 #0
Hardware name: linux,dummy-virt (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usercopy_abort+0x90/0x94 mm/usercopy.c:101
lr : usercopy_abort+0x90/0x94 mm/usercopy.c:89
sp : ffff80000b773a20
x29: ffff80000b773a30 x28: faff80000b745000 x27: ffff80000b773b48
x26: 0000000000000000 x25: 000000000000002b x24: 0000000000000000
x23: 00000000000000e0 x22: ffff80000b75db67 x21: 0000000000000001
x20: 000000000000002b x19: ffff80000b75db3c x18: 00000000fffffffd
x17: 2820636f6c6c616d x16: 76206d6f72662064 x15: 6574636574656420
x14: 74706d6574746120 x13: 2129333420657a69 x12: 73202c3237313031
x11: 3237313434333533 x10: 3336323937207465 x9 : 657275736f707865
x8 : ffff80000a30c550 x7 : ffff80000b773830 x6 : ffff80000b773830
x5 : 0000000000000000 x4 : ffff00007fbbaa10 x3 : 0000000000000000
x2 : 0000000000000000 x1 : f7ff000028fc0000 x0 : 0000000000000064
Call trace:
usercopy_abort+0x90/0x94 mm/usercopy.c:89
check_heap_object mm/usercopy.c:186 [inline]
__check_object_size mm/usercopy.c:252 [inline]
__check_object_size+0x198/0x36c mm/usercopy.c:214
check_object_size include/linux/thread_info.h:199 [inline]
check_copy_size include/linux/thread_info.h:235 [inline]
copy_to_user include/linux/uaccess.h:159 [inline]
bpf_prog_get_info_by_fd.isra.0+0xf14/0xfdc kernel/bpf/syscall.c:3993
bpf_obj_get_info_by_fd+0x12c/0x510 kernel/bpf/syscall.c:4253
__sys_bpf+0x900/0x2150 kernel/bpf/syscall.c:4956
__do_sys_bpf kernel/bpf/syscall.c:5021 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5019 [inline]
__arm64_sys_bpf+0x28/0x40 kernel/bpf/syscall.c:5019
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x48/0x114 arch/arm64/kernel/syscall.c:52
el0_svc_common.constprop.0+0x44/0xec arch/arm64/kernel/syscall.c:142
do_el0_svc+0xa0/0xc0 arch/arm64/kernel/syscall.c:206
el0_svc+0x44/0xb0 arch/arm64/kernel/entry-common.c:624
el0t_64_sync_handler+0x1ac/0x1b0 arch/arm64/kernel/entry-common.c:642
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:581
Code: aa0003e3 d00038c0 91248000 97fff65f (d4210000)
Fixes: db496944fd ("bpf: arm64: add JIT support for multi-function programs")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220531215113.1100754-1-eric.dumazet@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since 5bfa685e62 ("KVM: arm64: vgic: Read HW interrupt pending state
from the HW"), we're able to source the pending bit for an interrupt
that is stored either on the physical distributor or on a device.
However, this state is only available when the vcpu is loaded,
and is not intended to be accessed from userspace. Unfortunately,
the GICv2 emulation doesn't provide specific userspace accessors,
and we fallback with the ones that are intended for the guest,
with fatal consequences.
Add a new vgic_uaccess_read_pending() accessor for userspace
to use, build on top of the existing vgic_mmio_read_pending().
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 5bfa685e62 ("KVM: arm64: vgic: Read HW interrupt pending state from the HW")
Link: https://lore.kernel.org/r/20220607131427.1164881-2-maz@kernel.org
Cc: stable@vger.kernel.org
On each vcpu load, we set the KVM_ARM64_HOST_SME_ENABLED
flag if SME is enabled for EL0 on the host. This is used to
restore the correct state on vpcu put.
However, it appears that nothing ever clears this flag. Once
set, it will stick until the vcpu is destroyed, which has the
potential to spuriously enable SME for userspace. As it turns
out, this is due to the SME code being more or less copied from
SVE, and inheriting the same shortcomings.
We never saw the issue because nothing uses SME, and the amount
of testing is probably still pretty low.
Fixes: 861262ab86 ("KVM: arm64: Handle SME host state when running guests")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviwed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220528113829.1043361-3-maz@kernel.org
On each vcpu load, we set the KVM_ARM64_HOST_SVE_ENABLED
flag if SVE is enabled for EL0 on the host. This is used to restore
the correct state on vpcu put.
However, it appears that nothing ever clears this flag. Once
set, it will stick until the vcpu is destroyed, which has the
potential to spuriously enable SVE for userspace.
We probably never saw the issue because no VMM uses SVE, but
that's still pretty bad. Unconditionally clearing the flag
on vcpu load addresses the issue.
Fixes: 8383741ab2 ("KVM: arm64: Get rid of host SVE tracking/saving")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220528113829.1043361-2-maz@kernel.org
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
Pull arm64 fixes from Catalin Marinas:
"Most of issues addressed were introduced during this merging window.
- Initialise jump labels before setup_machine_fdt(), needed by commit
f5bda35fba ("random: use static branch for crng_ready()").
- Sparse warnings: missing prototype, incorrect __user annotation.
- Skip SVE kselftest if not sufficient vector lengths supported"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kselftest/arm64: signal: Skip SVE signal test if not enough VLs supported
arm64: Initialize jump labels before setup_machine_fdt()
arm64: hibernate: Fix syntax errors in comments
arm64: Remove the __user annotation for the restore_za_context() argument
ftrace/fgraph: fix increased missing-prototypes warnings
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
Pull more ARM SoC updates from Arnd Bergmann:
"This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request, or that
came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip,
including a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE"
* tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits)
ARM: configs: Enable more audio support for i.MX
tee: optee: Pass a pointer to virt_addr_valid()
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
arm64: dts: sprd: use new 'dma-channels' property
ARM: dts: da850: use new 'dma-channels' property
ARM: dts: pxa: use new 'dma-channels/requests' properties
soc: ixp4xx/qmgr: Fix unused match warning
ARM: ep93xx: Make ts72xx_register_flash() static
ARM: configs: enable support for Kontron KSwitch D10
ep93xx: clock: Do not return the address of the freed memory
arm64: dts: intel: add device tree for n6000
...
Pull RISC-V updates from Palmer Dabbelt:
- Support for the Svpbmt extension, which allows memory attributes to
be encoded in pages
- Support for the Allwinner D1's implementation of page-based memory
attributes
- Support for running rv32 binaries on rv64 systems, via the compat
subsystem
- Support for kexec_file()
- Support for the new generic ticket-based spinlocks, which allows us
to also move to qrwlock. These should have already gone in through
the asm-geneic tree as well
- A handful of cleanups and fixes, include some larger ones around
atomics and XIP
* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
riscv: compat: Using seperated vdso_maps for compat_vdso_info
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
riscv: Don't output a bogus mmu-type on a no MMU kernel
riscv: atomic: Add custom conditional atomic operation implementation
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Cleanup unnecessary definition
RISC-V: Load purgatory in kexec_file
RISC-V: Add purgatory
RISC-V: Support for kexec_file on panic
RISC-V: Add kexec_file support
RISC-V: use memcpy for kexec_file mode
kexec_file: Fix kexec_file.c build error for riscv platform
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: add memory-type errata for T-Head
...
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
Merge system power off handling rework from Dmitry Osipenko for
5.19-rc1.
This introduces a mechanism allowing power sequences to be used for
powering off the system and makes related changes in platform-specific
code for multiple platforms.
* pm-sysoff: (29 commits)
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
arm64: Use do_kernel_power_off()
riscv: Use do_kernel_power_off()
csky: Use do_kernel_power_off()
...
SoCFPGA dts updates for v5.19
- dtschema fix SPI NOR node
- correct dt-bindings doc for Altera gpio driver
- add support for n6000 Agilex platform and dt-bindings documentation
* tag 'socfpga_dts_updates_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: add device tree for n6000
dt-bindings: intel: add binding for Intel n6000
dt-bindings: soc: add bindings for Intel HPS Copy Engine
dt-bindings: gpio: altera: correct interrupt-cells
ARM: dts: socfpga: align SPI NOR node name with dtschema
Link: https://lore.kernel.org/r/20220519232317.16079-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
Pull crypto updates from Herbert Xu:
"API:
- Test in-place en/decryption with two sglists in testmgr
- Fix process vs softirq race in cryptd
Algorithms:
- Add arm64 acceleration for sm4
- Add s390 acceleration for chacha20
Drivers:
- Add polarfire soc hwrng support in mpsf
- Add support for TI SoC AM62x in sa2ul
- Add support for ATSHA204 cryptochip in atmel-sha204a
- Add support for PRNG in caam
- Restore support for storage encryption in qat
- Restore support for storage encryption in hisilicon/sec"
* tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume()
crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY
crypto: qat - add support for 401xx devices
crypto: qat - re-enable registration of algorithms
crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag
crypto: qat - add param check for DH
crypto: qat - add param check for RSA
crypto: qat - remove dma_free_coherent() for DH
crypto: qat - remove dma_free_coherent() for RSA
crypto: qat - fix memory leak in RSA
crypto: qat - add backlog mechanism
crypto: qat - refactor submission logic
crypto: qat - use pre-allocated buffers in datapath
crypto: qat - set to zero DH parameters before free
crypto: s390 - add crypto library interface for ChaCha20
crypto: talitos - Uniform coding style with defined variable
crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey()
crypto: cryptd - Protect per-CPU resource by disabling BH.
crypto: sun8i-ce - do not fallback if cryptlen is less than sg length
crypto: sun8i-ce - rework debugging
...
Clock properties for cru nodes to match the yaml-converted bindings
and renaming of Quartz-A bluetooth pin nodename to not conflict with
Yaml constraints.
* tag 'v5.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
Link: https://lore.kernel.org/r/7695907.Sb9uPGUboI@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull misc updates from Andrew Morton:
"The non-MM patch queue for this merge window.
Not a lot of material this cycle. Many singleton patches against
various subsystems. Most notably some maintenance work in ocfs2
and initramfs"
* tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits)
kcov: update pos before writing pc in trace function
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock
fs/ntfs: remove redundant variable idx
fat: remove time truncations in vfat_create/vfat_mkdir
fat: report creation time in statx
fat: ignore ctime updates, and keep ctime identical to mtime in memory
fat: split fat_truncate_time() into separate functions
MAINTAINERS: add Muchun as a memcg reviewer
proc/sysctl: make protected_* world readable
ia64: mca: drop redundant spinlock initialization
tty: fix deadlock caused by calling printk() under tty_port->lock
relay: remove redundant assignment to pointer buf
fs/ntfs3: validate BOOT sectors_per_clusters
lib/string_helpers: fix not adding strarray to device's resource list
kernel/crash_core.c: remove redundant check of ck_cmdline
ELF, uapi: fixup ELF_ST_TYPE definition
ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
ipc: update semtimedop() to use hrtimer
ipc/sem: remove redundant assignments
...
Fix the arm64 build error which was caused by commit ae07562909 ("mm:
change huge_ptep_clear_flush() to return the original pte") interacting
with commit fb396bb459 ("arm64/hugetlb: Drop TLB flush from
get_clear_flush()"):
arch/arm64/mm/hugetlbpage.c: In function ‘huge_ptep_clear_flush’:
arch/arm64/mm/hugetlbpage.c:515:9: error: implicit declaration of function ‘get_clear_flush’; did you mean ‘ptep_clear_flush’? [-Werror=implicit-function-declaration]
515 | return get_clear_flush(vma->vm_mm, addr, ptep, pgsize, ncontig);
| ^~~~~~~~~~~~~~~
| ptep_clear_flush
Due to the new get_clear_contig() has dropped TLB flush, we should add
an explicit TLB flush in huge_ptep_clear_flush() to keep original
semantics when changing to use new get_clear_contig().
Fixes: fb396bb459 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()").
Fixes: ae07562909 ("mm: change huge_ptep_clear_flush() to return the original pte")
Reported-and-tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add clocks and clock-names because the device has to have
at least one input clock.
Also in case someone wants to add properties that start with
assign-xxx to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329180550.31043-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add clocks and clock-names to the rk3308 cru node, because
the device has to have at least one input clock.
Also in case someone wants to add properties that start with
assign-xxx to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
With the addition of new properties also sort the node properties
a little bit.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329184339.1134-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
