We use forcewake to prevent the SoC from actually entering
PC8 while performing the PC8 disable sequence. Hide that
behind a new parent interface to eliminate the naked
forcewake/uncore usage from the display power code.
v2: Mark the interface optional and warn if
someone calls it when not provided (Jani)
Include the header to make sure the extern
declaration matches the definition (Jani)
v3: Rebase due to shuffling
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251218182052.18756-1-ville.syrjala@linux.intel.com
Whether AuxCCS can be properly supported depends on the support both from
the display side and non-display side of the driver.
Let us therefore allow for the non-display part to be queried via the
display parent interface.
The new interface replaces the HAS_AUX_CCS macro and we also remove the
FIXME from skl_universal_plane_create since now the xe will not advertise
the AuxCCS caps to start with so they do not need to be removed after
enumeration.
Also, by removing this build specific FIXME we come a step closer to fully
de-coupling display and non-display.
The existing HAS_AUX_CCS gets renamed to HAS_AUX_DIST since it is still
required for determining the need for PLANE_AUX_DIST programming.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
References: cf48bddd31 ("drm/i915/display: Disable AuxCCS framebuffers if built for Xe")
Cc: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com> # v1
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251209120034.9143-1-tursulin@igalia.com
Extra drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add support for drm colorop pipeline.
- Add COLOR PIPELINE plane property.
- Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE.
Cross-subsystem Changes:
- Attempt to use higher order mappings in system heap allocator.
- Always taint kernel with sw-sync.
Core Changes:
- Small fixes to drm/gem.
- Support emergency restore to drm-client.
- Allocate and release fb_info in single place.
- Rework ttm pipelined eviction fence handling.
Driver Changes:
- Support the drm color pipeline in vkms, amdgfx.
- Add NVJPG driver for tegra.
- Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp,
panthor.
- Add ASL CS5263 DP-to-HDMI simple bridge.
- Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0,
Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA,
Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel.
- Add support for it66122 to it66121.
- Support mali-G1 gpu in panthor.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
We've previously introduced DRM_COLOROP_1D_CURVE for
pre-defined 1D curves. But we also have HW that supports
custom curves and userspace needs the ability to pass
custom curves, aka LUTs.
This patch introduces a new colorop type, called
DRM_COLOROP_1D_LUT that provides a SIZE property which
is used by a driver to advertise the supported SIZE
of the LUT, as well as a DATA property which userspace
uses to set the LUT.
DATA and size function in the same way as current drm_crtc
GAMMA and DEGAMMA LUTs.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-38-alex.hung@amd.com
The PQ function defines a mapping of code values to nits (cd/m^2).
The max code value maps to 10,000 nits.
Windows DWM's canonical composition color space (CCCS) defaults
to composing SDR contents to 80 nits and uses a float value of
1.0 to represent this. For this reason AMD HW hard-codes a PQ
function that is scaled by 125, yielding 80 nit PQ values for
1.0 and 10,000 nits at 125.0.
This patch introduces this scaled PQ EOTF and its inverse as
1D curve types.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-32-alex.hung@amd.com
This type is used to support a 3x4 matrix in colorops. A 3x4
matrix uses the last column as a "bias" column. Some HW exposes
support for 3x4. The calculation looks like:
out matrix in
|R| |0 1 2 3 | | R |
|G| = |4 5 6 7 | x | G |
|B| |8 9 10 11| | B |
|1.0|
This is also the first colorop where we need a blob property to
program the property. For that we'll introduce a new DATA
property that can be used by all colorop TYPEs requiring a
blob. The way a DATA blob is read depends on the TYPE of
the colorop.
We only create the DATA property for property types that
need it.
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-19-alex.hung@amd.com
With the introduction of the pre-blending color pipeline we
can no longer have color operations that don't have a clear
position in the color pipeline. We deprecate all existing
plane properties. For upstream drivers those are:
- COLOR_ENCODING
- COLOR_RANGE
Drivers are expected to ignore these properties when
programming the HW. DRM clients that register with
DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE will not be allowed to
set the COLOR_ENCODING and COLOR_RANGE properties.
Setting of the COLOR_PIPELINE plane property or drm_colorop
properties is only allowed for userspace that sets this
client cap.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-12-alex.hung@amd.com
Until now ttm stored a single pipelined eviction fence which means
drivers had to use a single entity for these evictions.
To lift this requirement, this commit allows up to 8 entities to
be used.
Ideally a dma_resv object would have been used as a container of
the eviction fences, but the locking rules makes it complex.
dma_resv all have the same ww_class, which means "Attempting to
lock more mutexes after ww_acquire_done." is an error.
One alternative considered was to introduced a 2nd ww_class for
specific resv to hold a single "transient" lock (= the resv lock
would only be held for a short period, without taking any other
locks).
The other option, is to statically reserve a fence array, and
extend the existing code to deal with N fences, instead of 1.
The driver is still responsible to reserve the correct number
of fence slots.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Link: https://lore.kernel.org/r/20251121101315.3585-20-pierre-eric.pelloux-prayer@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Move the calls to drm_fb_helper_alloc_info() from drivers into a
single place in fbdev helpers. Allocates struct fb_info for a new
framebuffer device. Then call drm_fb_helper_single_fb_probe() to
create an fbdev screen buffer. Also release the instance on errors
by calling drm_fb_helper_release_info().
Simplifies the code and fixes the error cleanup for some of the
drivers.
Regular release of the struct fb_info instance still happens in
drm_fb_helper_fini() as before.
v2:
- remove error rollback in driver implementations (kernel test robot)
- initialize info in TTM implementation (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com> # radeon
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> # msm
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20251027081245.80262-1-tzimmermann@suse.de
Move the sysrq functionality from DRM fbdev helpers to the DRM device
and in-kernel clients, so that it becomes available on all clients.
DRM fbdev helpers support emergency restoration of the console output
via a special key combination. Press SysRq+v to replace the current
compositor with the kernel's output on the framebuffer console. This
allows users to see the log messages during system emergencies.
By moving the functionality from fbdev helpers to the DRM device, any
in-kernel client can serve as emergency output. This can be used to
bring up drm_log, for example.
Each DRM device registers itself to the list of possible sysrq handlers.
On receiving SysRq+v, the DRM core goes over all registered devices and
restores an in-kernel DRM client for each of them.
See Documentation/admin-guide/sysrq.rst on how to invoke SysRq. Switch
VTs to bring back the user-space compositor.
v2:
- declare placeholders as 'static inline' (kernel test robot)
- fix grammar in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20251110154616.539328-3-tzimmermann@suse.de
Add force parameter to client restore and pass value through the
layers. The only currently used value is false.
If force is true, the client should restore its display even if it
does not hold the DRM master lock. This is be required for emergency
output, such as sysrq.
While at it, inline drm_fb_helper_lastclose(), which is a trivial
wrapper around drm_fb_helper_restore_fbdev_mode_unlocked().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20251110154616.539328-2-tzimmermann@suse.de
Cross-subsystem Changes:
Rust
- Make slice::as_flattened usable on all supported versions of rustc.
- Add FromBytes::from_bytes_prefix() method.
Core Changes:
- Update Tyr in MAINTAINERS file.
- Remove redundant device ptr from Rust GEM object.
- Change how AlwaysRefCounted is implemented for GEM objects.
- Add deferred vm_bo cleanup to GPUVM and use it in Panthor.
Driver Changes:
Nova Core
- Introduction of bitfield! macro, with support for different storage sizes
and custom visibility.
- Introduction of safe converters between integer types for which the
conversion is lossless.
- GSP initialized up to fully booted state on Ampere.
- Use more future-proof register for GPU identification.
- Various simplifications and optimizations.
Nova
- Select NOVA_CORE.
- Depend on CONFIG_64BIT.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/aRxtJC0D1pQUepF4@google.com
