Pull kmalloc_obj updates from Kees Cook:
"Introduce the kmalloc_obj* family of APIs for switching to type-based
kmalloc allocations, away from purely size-based allocations.
Discussed on lkml, with you, and at Linux Plumbers. It's been in -next
for the entire dev cycle.
Before the merge window closes, I'd like to send the treewide
change (generated from the Coccinelle script included here), which
mechanically converts almost 20k callsites from kmalloc* to
kmalloc_obj*:
8007 files changed, 19980 insertions(+), 20838 deletions(-)
This change needed fixes for mismatched types (since now the return
type from allocations is a pointer to the requested type, not "void
*"), and I've been fixing these over the last 4 releases.
These fixes have mostly been trivial mismatches with const qualifiers
or accidentally identical sizes (e.g. same object size: "struct kvec"
vs "struct iovec", or differing pointers to pointers), but I did catch
one case of too-small allocation.
Summary:
- Introduce kmalloc_obj*() family of type-based allocator APIs
- checkpatch: Suggest kmalloc_obj family for sizeof allocations
- coccinelle: Add kmalloc_objs conversion script"
* tag 'kmalloc_obj-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
coccinelle: Add kmalloc_objs conversion script
slab: Introduce kmalloc_flex() and family
compiler_types: Introduce __flex_counter() and family
checkpatch: Suggest kmalloc_obj family for sizeof allocations
slab: Introduce kmalloc_obj() and family
Pull crypto library updates from Eric Biggers:
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (53 commits)
lib/crypto: mldsa: Clarify the documentation for mldsa_verify() slightly
lib/crypto: aes: Drop 'volatile' from aes_sbox and aes_inv_sbox
lib/crypto: aes: Remove old AES en/decryption functions
lib/crypto: aesgcm: Use new AES library API
lib/crypto: aescfb: Use new AES library API
crypto: omap - Use new AES library API
crypto: inside-secure - Use new AES library API
crypto: drbg - Use new AES library API
crypto: crypto4xx - Use new AES library API
crypto: chelsio - Use new AES library API
crypto: ccp - Use new AES library API
crypto: x86/aes-gcm - Use new AES library API
crypto: arm64/ghash - Use new AES library API
crypto: arm/ghash - Use new AES library API
staging: rtl8723bs: core: Use new AES library API
net: phy: mscc: macsec: Use new AES library API
chelsio: Use new AES library API
Bluetooth: SMP: Use new AES library API
crypto: x86/aes - Remove the superseded AES-NI crypto_cipher
lib/crypto: x86/aes: Add AES-NI optimization
...
Pull documentation updates from Jonathan Corbet:
"A slightly calmer cycle for docs this time around, though there is
still a fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for
patch submissions, and a separate document intended for consumption
by generative tools
- The completion of the move of the documentation tools to
tools/docs. For now we're leaving a /scripts/kernel-doc symlink
behind to avoid breaking scripts
- Ongoing build-system work includes the incorporation of
documentation in Python code, better support for documenting
variables, and lots of improvements and fixes
- Automatic linking of man-page references -- cat(1), for example --
to the online pages in the HTML build
...and the usual array of typo fixes and such"
* tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (107 commits)
doc: development-process: add notice on testing
tools: sphinx-build-wrapper: improve its help message
docs: sphinx-build-wrapper: allow -v override -q
docs: kdoc: Fix pdfdocs build for tools
docs: ja_JP: process: translate 'Obtain a current source tree'
docs: fix 're-use' -> 'reuse' in documentation
docs: ioctl-number: fix a typo in ioctl-number.rst
docs: filesystems: ensure proc pid substitutable is complete
docs: automarkup.py: Skip common English words as C identifiers
Documentation: use a source-read extension for the index link boilerplate
docs: parse_features: make documentation more consistent
docs: add parse_features module documentation
docs: jobserver: do some documentation improvements
docs: add jobserver module documentation
docs: kabi: helpers: add documentation for each "enum" value
docs: kabi: helpers: add helper for debug bits 7 and 8
docs: kabi: system_symbols: end docstring phrases with a dot
docs: python: abi_regex: do some improvements at documentation
docs: python: abi_parser: do some improvements at documentation
docs: add kabi modules documentation
...
Pull RCU updates from Boqun Feng:
- RCU Tasks Trace:
Re-implement RCU tasks trace in term of SRCU-fast, not only more than
500 lines of code are saved because of the reimplementation, a new
set of API, rcu_read_{,un}lock_tasks_trace(), becomes possible as
well. Compared to the previous rcu_read_{,un}lock_trace(), the new
API avoid the task_struct accesses thanks to the SRCU-fast semantics.
As a result, the old rcu_read{,un}lock_trace() API is now deprecated.
- RCU Torture Test:
- Multiple improvements on kvm-series.sh (parallel run and
progress showing metrics)
- Add context checks to rcu_torture_timer()
- Make config2csv.sh properly handle comments in .boot files
- Include commit discription in testid.txt
- Miscellaneous RCU changes:
- Reduce synchronize_rcu() latency by reporting GP kthread's
CPU QS early
- Use suitable gfp_flags for the init_srcu_struct_nodes()
- Fix rcu_read_unlock() deadloop due to softirq
- Correctly compute probability to invoke ->exp_current()
in rcutorture
- Make expedited RCU CPU stall warnings detect stall-end races
- RCU nocb:
- Remove unnecessary WakeOvfIsDeferred wake path and callback
overload handling
- Extract nocb_defer_wakeup_cancel() helper
* tag 'rcu.release.v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (25 commits)
rcu/nocb: Extract nocb_defer_wakeup_cancel() helper
rcu/nocb: Remove dead callback overload handling
rcu/nocb: Remove unnecessary WakeOvfIsDeferred wake path
rcu: Reduce synchronize_rcu() latency by reporting GP kthread's CPU QS early
srcu: Use suitable gfp_flags for the init_srcu_struct_nodes()
rcu: Fix rcu_read_unlock() deadloop due to softirq
rcutorture: Correctly compute probability to invoke ->exp_current()
rcu: Make expedited RCU CPU stall warnings detect stall-end races
rcutorture: Add --kill-previous option to terminate previous kvm.sh runs
rcutorture: Prevent concurrent kvm.sh runs on same source tree
torture: Include commit discription in testid.txt
torture: Make config2csv.sh properly handle comments in .boot files
torture: Make kvm-series.sh give run numbers and totals
torture: Make kvm-series.sh give build numbers and totals
torture: Parallelize kvm-series.sh guest-OS execution
rcutorture: Add context checks to rcu_torture_timer()
rcutorture: Test rcu_tasks_trace_expedite_current()
srcu: Create an rcu_tasks_trace_expedite_current() function
checkpatch: Deprecate rcu_read_{,un}lock_trace()
rcu: Update Requirements.rst for RCU Tasks Trace
...
Pull objtool fixes from Ingo Molnar::
- Bump up the Clang minimum version requirements for livepatch
builds, due to Clang assembler section handling bugs causing
silent miscompilations
- Strip livepatching symbol artifacts from non-livepatch modules
- Fix livepatch build warnings when certain Clang LTO options
are enabled
- Fix livepatch build error when CONFIG_MEM_ALLOC_PROFILING_DEBUG=y
* tag 'objtool-urgent-2026-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/klp: Fix unexported static call key access for manually built livepatch modules
objtool/klp: Fix symbol correlation for orphaned local symbols
livepatch: Free klp_{object,func}_ext data after initialization
livepatch: Fix having __klp_objects relics in non-livepatch modules
livepatch/klp-build: Require Clang assembler >= 20
The klp_object_ext and klp_func_ext data, which are stored in the
__klp_objects and __klp_funcs sections, respectively, are not needed
after they are used to create the actual klp_object and klp_func
instances. This operation is implemented by the init function in
scripts/livepatch/init.c.
Prefix the two sections with ".init" so they are freed after the module
is initializated.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Link: https://patch.msgid.link/20260123102825.3521961-3-petr.pavlu@suse.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
The linker script scripts/module.lds.S specifies that all input
__klp_objects sections should be consolidated into an output section of
the same name, and start/stop symbols should be created to enable
scripts/livepatch/init.c to locate this data.
This start/stop pattern is not ideal for modules because the symbols are
created even if no __klp_objects input sections are present.
Consequently, a dummy __klp_objects section also appears in the
resulting module. This unnecessarily pollutes non-livepatch modules.
Instead, since modules are relocatable files, the usual method for
locating consolidated data in a module is to read its section table.
This approach avoids the aforementioned problem.
The klp_modinfo already stores a copy of the entire section table with
the final addresses. Introduce a helper function that
scripts/livepatch/init.c can call to obtain the location of the
__klp_objects section from this data.
Fixes: dd590d4d57 ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Link: https://patch.msgid.link/20260123102825.3521961-2-petr.pavlu@suse.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Pull objtool fixes from Ingo Molnar:
- Fix a build error on ia32-x86_64 cross builds
- Replace locally open coded ALIGN_UP(), ALIGN_UP_POW2()
and MAX(), which, beyond being duplicates, the
ALIGN_UP_POW2() is also buggy
- Fix objtool klp-diff regression caused by a recent
change to the bug table format
- Fix klp-build vs CONFIG_MODULE_SRCVERSION_ALL build
failure
* tag 'objtool-urgent-2026-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
livepatch/klp-build: Fix klp-build vs CONFIG_MODULE_SRCVERSION_ALL
objtool/klp: Fix bug table handling for __WARN_printf()
objtool: Replace custom macros in elf.c with shared ones
objtool: Print bfd_vma as unsigned long long on ia32-x86_64 cross build
Pull Kbuild fixes from Nicolas Schier:
- Generate rpm-pkg debuginfo package manually, allowing signed kernel
modules in rpm package, again
- Fix permissions of modules.builtin.modinfo
- Do not run kernel-doc when building external modules
* tag 'kbuild-fixes-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Do not run kernel-doc when building external modules
kbuild: Fix permissions of modules.builtin.modinfo
kbuild: rpm-pkg: Generate debuginfo package manually
After commit 778b8ebe51 ("docs: Move the python libraries to
tools/lib/python"), building an external module with any value of W=
against the output of install-extmod-build fails with:
$ make -C /usr/lib/modules/6.19.0-rc7-00108-g4d310797262f/build M=$PWD W=1
make: Entering directory '/usr/lib/modules/6.19.0-rc7-00108-g4d310797262f/build'
make[1]: Entering directory '...'
CC [M] ...
Traceback (most recent call last):
File "/usr/lib/modules/6.19.0-rc7-00108-g4d310797262f/build/scripts/kernel-doc.py", line 339, in <module>
main()
~~~~^^
File "/usr/lib/modules/6.19.0-rc7-00108-g4d310797262f/build/scripts/kernel-doc.py", line 295, in main
from kdoc.kdoc_files import KernelFiles # pylint: disable=C0415
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ModuleNotFoundError: No module named 'kdoc'
scripts/lib was included in the build directory from find_in_scripts but
after the move to tools/lib/python, it is no longer included, breaking
kernel-doc.py.
Commit eba6ffd126 ("docs: kdoc: move kernel-doc to tools/docs") breaks
this even further by moving kernel-doc outside of scripts as well, so it
cannot be found when called by cmd_checkdoc.
$ make -C /usr/lib/modules/6.19.0-rc7-next-20260130/build M=$PWD W=1
make: Entering directory '/usr/lib/modules/6.19.0-rc7-next-20260130/build'
make[1]: Entering directory '...'
CC [M] ...
python3: can't open file '/usr/lib/modules/6.19.0-rc7-next-20260130/build/tools/docs/kernel-doc': [Errno 2] No such file or directory
While kernel-doc could be useful for external modules, it is more useful
for in-tree documentation that will be build and included in htmldocs.
Rather than including it in install-extmod-build, just skip running
kernel-doc for the external module build.
Cc: stable@vger.kernel.org
Fixes: 778b8ebe51 ("docs: Move the python libraries to tools/lib/python")
Reported-by: Rong Zhang <i@rong.moe>
Closes: https://lore.kernel.org/20260129175321.415295-1-i@rong.moe/
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260130-kbuild-skip-kernel-doc-extmod-v1-1-58443d60131a@kernel.org
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Trigger rebuilds of the newly added 'proc-macro2' crate (and its
dependencies) when the Rust compiler version changes
- Fix error in '.rsi' targets (macro expanding single targets) under
'O=' pointing to an external (not subdir) folder
- Fix off-by-one line number in 'rustdoc' KUnit tests
- Add '-fdiagnostics-show-context' to GCC flags skipped by 'bindgen'
- Clean objtool warning by adding one more 'noreturn' function
- Clean 'libpin_init_internal.{so,dylib}' in 'mrproper'
'kernel' crate:
- Fix build error when using expressions in formatting arguments
- Mark 'num::Bounded::__new()' as unsafe and clean documentation
accordingly
- Always inline functions using 'build_assert' with arguments
- Fix 'rusttest' build error providing the right 'isize_atomic_repr'
type for the host
'macros' crate:
- Fix 'rusttest' build error by ignoring example
rust-analyzer:
- Remove assertion that was not true for distributions like NixOS
- Add missing dependency edges and fix editions for 'quote' and
sysroot crates to provide correct IDE support
DRM Tyr:
- Fix build error by adding missing dependency on 'CONFIG_COMMON_CLK'
Plus clean a few typos in docs and comments"
* tag 'rust-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (28 commits)
rust: num: bounded: clean __new documentation and comments
scripts: generate_rust_analyzer: fix resolution of #[pin_data] macros
drm/tyr: depend on `COMMON_CLK` to fix build error
rust: sync: atomic: Provide stub for `rusttest` 32-bit hosts
kbuild: rust: clean libpin_init_internal in mrproper
rust: proc-macro2: rebuild if the version text changes
rust: num: bounded: add missing comment for always inlined function
rust: sync: refcount: always inline functions using build_assert with arguments
rust: bits: always inline functions using build_assert with arguments
scripts: generate_rust_analyzer: compile sysroot with correct edition
scripts: generate_rust_analyzer: compile quote with correct edition
scripts: generate_rust_analyzer: quote: treat `core` and `std` as dependencies
scripts: generate_rust_analyzer: syn: treat `std` as a dependency
scripts: generate_rust_analyzer: remove sysroot assertion
rust: kbuild: give `--config-path` to `rustfmt` in `.rsi` target
scripts: generate_rust_analyzer: Add pin_init_internal deps
scripts: generate_rust_analyzer: Add pin_init -> compiler_builtins dep
scripts: generate_rust_analyzer: Add compiler_builtins -> core dep
rust: macros: ignore example with module parameters
rust: num: bounded: mark __new as unsafe
...
Some special sections specify their ELF section entsize, for example:
.pushsection section, "M", @progbits, 8
The entsize (8 in this example) is needed by objtool klp-diff for
extracting individual entries.
Clang assembler versions older than 20 silently ignore the above
construct and set entsize to 0, resulting in the following error:
.discard.annotate_data: missing special section entsize or annotations
Add a klp-build check to prevent the use of Clang assembler versions
prior to 20.
Fixes: 24ebfcd65a ("livepatch/klp-build: Introduce klp-build script for generating livepatch modules")
Reported-by: Song Liu <song@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/957fd52e375d0e2cfa3ac729160da995084a7f5e.1769562556.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Currently, modules.builtin.modinfo is created with executable permissions
(0755). This is because after commit 39cfd5b121 ("kbuild: extract
modules.builtin.modinfo from vmlinux.unstripped"), modules.builtin.modinfo
is extracted from vmlinux.unstripped using objcopy. When extracting
sections, objcopy inherits attributes from the source ELF file.
Since modules.builtin.modinfo is a data file and not an executable,
it should have regular file permissions (0644). The executable bit
can trigger warnings in Debian's Lintian tool.
Explicitly remove the executable bit after generation.
Fixes: 39cfd5b121 ("kbuild: extract modules.builtin.modinfo from vmlinux.unstripped")
Signed-off-by: Ethan Zuo <yuxuan.zuo@outlook.com>
Link: https://patch.msgid.link/SY0P300MB0609F6916B24ADF65502940B9C91A@SY0P300MB0609.AUSP300.PROD.OUTLOOK.COM
Signed-off-by: Nicolas Schier <nsc@kernel.org>
When building a patch to a single-file kernel module with
CONFIG_MODULE_SRCVERSION_ALL enabled, the klp-build module link fails in
modpost:
Diffing objects
drivers/md/raid0.o: changed function: raid0_run
Building patch module: livepatch-0001-patch-raid0_run.ko
drivers/md/raid0.c: No such file or directory
...
The problem here is that klp-build copied drivers/md/.raid0.o.cmd to the
module build directory, but it didn't also copy over the input source
file listed in the .cmd file:
source_drivers/md/raid0.o := drivers/md/raid0.c
So modpost dies due to the missing .c file which is needed for
calculating checksums for CONFIG_MODULE_SRCVERSION_ALL.
Instead of copying the original .cmd file, just create an empty one.
Modpost only requires that it exists. The original object's build
dependencies are irrelevant for the frankenobjects used by klp-build.
Fixes: 24ebfcd65a ("livepatch/klp-build: Introduce klp-build script for generating livepatch modules")
Reported-by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/c41b6629e02775e4c1015259aa36065b3fe2f0f3.1769471792.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Pull tracing fixes from Steven Rostedt:
- Fix a crash with passing a stacktrace between synthetic events
A synthetic event is an event that combines two events into a single
event that can display fields from both events as well as the time
delta that took place between the events. It can also pass a
stacktrace from the first event so that it can be displayed by the
synthetic event (this is useful to get a stacktrace of a task
scheduling out when blocked and recording the time it was blocked
for).
A synthetic event can also connect an existing synthetic event to
another event. An issue was found that if the first synthetic event
had a stacktrace as one of its fields, and that stacktrace field was
passed to the new synthetic event to be displayed, it would crash the
kernel. This was due to the stacktrace not being saved as a
stacktrace but was still marked as one. When the stacktrace was read,
it would try to read an array but instead read the integer metadata
of the stacktrace and dereferenced a bad value.
Fix this by saving the stacktrace field as a stacktrace.
- Fix possible overflow in cmp_mod_entry() compare function
A binary search is used to find a module address and if the addresses
are greater than 2GB apart it could lead to truncation and cause a
bad search result. Use normal compares instead of a subtraction
between addresses to calculate the compare value.
- Fix output of entry arguments in function graph tracer
Depending on the configurations enabled, the entry can be two
different types that hold the argument array. The macro
FGRAPH_ENTRY_ARGS() is used to find the correct arguments from the
given type. One location was missed and still referenced the
arguments directly via entry->args and could produce the wrong value
depending on how the kernel was configured.
- Fix memory leak in scripts/tracepoint-update build tool
If the array fails to allocate, the memory for the values needs to be
freed and was not. Free the allocated values if the array failed to
allocate.
* tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/tracepoint-update: Fix memory leak in add_string() on failure
function_graph: Fix args pointer mismatch in print_graph_retval()
tracing: Avoid possible signed 64-bit truncation
tracing: Fix crash on synthetic stacktrace field usage
When realloc() fails in add_string(), the function returns -1 but leaves
*vals pointing to the previously allocated memory. This can cause memory
leaks in callers like make_trace_array() that return on error without
freeing the partially built array.
Fix this by freeing *vals and setting it to NULL when realloc() fails.
This makes the error handling self-contained in add_string() so callers
don't need to handle cleanup on failure.
This bug is found by my static analysis tool and my code review.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: e30f8e61e2 ("tracing: Add a tracepoint verification check at build time")
Link: https://patch.msgid.link/20260119114542.1714405-1-geoffreyhe2@gmail.com
Signed-off-by: Weigang He <geoffreyhe2@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Some folks evidently have muscle memory expecting kernel-doc to be under
scripts/. Now that we have moved it to tools/docs, leave behind a symbolic
link to reduce the global profanity count.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are some typos and English errors in the comments of kernel‑doc.py.
Locate them with the help of an LLM (gpt‑oss 14B), executed locally
with this prompt:
review English grammar and syntax at the comments on the code below:
<cat scripts/kernel-doc.py>
While LLM worked fine for the task of doing an English grammar review
for strings, being able to distinguish them from the actual code, it
was not is perfect: some things required manual work to fix.
-
While here, replace:
"/**" with: ``/**``
As, if we ever rename this script to kernel_doc.py and add it to
Sphinx ext autodoc, we want to avoid this warning:
scripts/kernel_doc.py:docstring of kernel_doc:10: WARNING: Inline strong start-string without end-string. [docutils]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <ec08727f22ad35e6c58519c1f425f216f14b701c.1768823489.git.mchehab+huawei@kernel.org>
Fix the `generate_rust_analyzer.py` script to ensure that the
`rust-project.json` it produces includes `core` and `std` in the `deps`
field for the `quote` crate.
`quote` directly references items from both `core` and `std`, so
rust-analyzer should treat them as dependencies to provide correct IDE
support.
For example, the `::quote::ToTokens` trait is implemented for
`std::ffi::CString`. With `std` listed in the `deps` field,
rust-analyzer can show the expected autocomplete for the
`::quote::ToTokens` methods on `std::ffi::CString`.
Verified the explicit uses of `core` and `std` using:
grep -rnE 'core::|std::' rust/quote/
Fixes: 88de91cc1c ("rust: quote: enable support in kbuild")
Signed-off-by: Jesung Yang <y.j3ms.n@gmail.com>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Link: https://patch.msgid.link/cef76fc1105481d219953c8552eb5eb07dac707a.1764062688.git.y.j3ms.n@gmail.com
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fix the `generate_rust_analyzer.py` script to ensure that the
`rust-project.json` it produces includes `std` in the `deps` field for
the `syn` crate.
`syn` directly references items from `std`, so rust-analyzer should
treat it as a dependency to provide correct IDE support.
For example, `syn::Punctuated` contains fields of type `Vec<..>` and
`Option<..>`, both of which come from the standard library prelude.
With `std` listed in the `deps` field, rust-analyzer can infer the types
of these fields instead of showing `{unknown}`.
Verified the explicit uses of `std` using:
grep -rn 'std::' rust/syn/
Fixes: 737401751a ("rust: syn: enable support in kbuild")
Signed-off-by: Jesung Yang <y.j3ms.n@gmail.com>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Tested-by: Tamir Duberstein <tamird@gmail.com>
Link: https://patch.msgid.link/6dbdf6e1c1639ae381ca9ab7041f84728ffa2267.1764062688.git.y.j3ms.n@gmail.com
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`rustfmt` is configured via the `.rustfmt.toml` file in the source tree,
and we apply `rustfmt` to the macro expanded sources generated by the
`.rsi` target.
However, under an `O=` pointing to an external folder (i.e. not just
a subdir), `rustfmt` will not find the file when checking the parent
folders. Since the edition is configured in this file, this can lead to
errors when it encounters newer syntax, e.g.
error: expected one of `!`, `.`, `::`, `;`, `?`, `where`, `{`, or an operator, found `"rust_minimal"`
--> samples/rust/rust_minimal.rsi:29:49
|
28 | impl ::kernel::ModuleMetadata for RustMinimal {
| - while parsing this item list starting here
29 | const NAME: &'static ::kernel::str::CStr = c"rust_minimal";
| ^^^^^^^^^^^^^^ expected one of 8 possible tokens
30 | }
| - the item list ends here
|
= note: you may be trying to write a c-string literal
= note: c-string literals require Rust 2021 or later
= help: pass `--edition 2024` to `rustc`
= note: for more on editions, read https://doc.rust-lang.org/edition-guide
A workaround is to use `RUSTFMT=n`, which is documented in the `Makefile`
help for cases where macro expanded source may happen to break `rustfmt`
for other reasons, but this is not one of those cases.
One solution would be to pass `--edition`, but we want `rustfmt` to
use the entire configuration, even if currently we essentially use the
default configuration.
Thus explicitly give the path to the config file to `rustfmt` instead.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Fixes: 2f7ab1267d ("Kbuild: add Rust support")
Cc: stable@vger.kernel.org
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260115183832.46595-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When running make nconfig with a static linking host toolchain,
the libraries are linked in an incorrect order,
resulting in errors similar to the following:
$ MAKEFLAGS='HOSTCC=cc\ -static' make nconfig
/usr/bin/ld: /usr/lib64/gcc/x86_64-unknown-linux-gnu/14.2.1/../../../../lib64/libpanel.a(p_new.o): in function `new_panel':
(.text+0x13): undefined reference to `_nc_panelhook_sp'
/usr/bin/ld: (.text+0x6c): undefined reference to `_nc_panelhook_sp'
Fixes: 1c5af5cf93 ("kconfig: refactor ncurses package checks for building mconf and nconf")
Signed-off-by: Arusekk <floss@arusekk.pl>
Link: https://patch.msgid.link/20260110114808.22595-1-floss@arusekk.pl
[nsc: Added comment about library order]
Signed-off-by: Nicolas Schier <nsc@kernel.org>
The check-function-names.sh scripts invokes 'nm' directly and this can
be problematic during cross-compilation when the toolchain is different
from the system's default (e.g. LLVM=1).
scripts/check-function-names.sh: nm: not found
Let's prefer the ${NM} variable which is already set by kbuild. However,
still fallback to plain 'nm' to ensure the script is still usable when
called directly.
Fixes: 93863f3f85 ("kbuild: Check for functions with ambiguous -ffunction-sections section names")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251218175824.3122690-1-cmllamas@google.com
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Add some simple KUnit tests for the nh() function.
These replace the test coverage which will be lost by removing the
nhpoly1305 crypto_shash.
Note that the NH code also continues to be tested indirectly as well,
via the tests for the "adiantum(xchacha12,aes)" crypto_skcipher.
Link: https://lore.kernel.org/r/20251211011846.8179-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Pull crypto library fixes from Eric Biggers:
- A couple more fixes for the lib/crypto KUnit tests
- Fix missing MMU protection for the AES S-box
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: aes: Fix missing MMU protection for AES S-box
MAINTAINERS: add test vector generation scripts to "CRYPTO LIBRARY"
lib/crypto: tests: Fix syntax error for old python versions
lib/crypto: tests: polyval_kunit: Increase iterations for preparekey in IRQs
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit e7e2941300 ("kbuild: split device tree build rules into
scripts/Makefile.dtbs"), it is no longer possible to compile a device tree
blob that is not specified in a make rule
like:
dtb-$(CONFIG_FOO) += foo.dtb
Before the mentioned commit, one could copy a dts file to e.g.
arch/arm64/boot/dts/ (or a new subdirectory) and then convert it to a dtb
file using:
make ARCH=arm64 foo.dtb
In this scenario, both 'dtb-y' and 'dtb-' are empty, and the inclusion of
scripts/Makefile.dtbs relies on 'targets' to contain the MAKECMDGOALS. The
value of 'targets', however, is only final later in the code.
Move the conditional include of scripts/Makefile.dtbs down to where the
value of 'targets' is final. Since Makefile.dtbs updates 'always-y' which is
used as a prerequisite in the build rule, the build rule also needs to move
down.
Fixes: e7e2941300 ("kbuild: split device tree build rules into scripts/Makefile.dtbs")
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251126100017.1162330-1-thomas.de_schampheleire@nokia.com
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Enhance the coccicheck script to filter *.cocci files based on the
specified MODE (e.g., report, patch). This ensures that only compatible
semantic patch files are executed, preventing errors such as:
"virtual rule report not supported"
This error occurs when a .cocci file does not define a 'virtual <MODE>'
rule, yet is executed in that mode.
For example:
make coccicheck M=drivers/hwtracing/coresight/ MODE=report
In this case, running "secs_to_jiffies.cocci" would trigger the error
because it lacks support for 'report' mode. With this change, such files
are skipped automatically, improving robustness and developer
experience.
Signed-off-by: Songwei Chai <quic_songchai@quicinc.com>
Reviewed-by: Julia Lawall <Julia.Lawall@inria.fr>
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
Pull Kbuild fix from Nathan Chancellor:
- Fix install-extmod-build when ccache is used via CC
* tag 'kbuild-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: install-extmod-build: Properly fix CC expansion when ccache is used
