Arm SCMI updates for v6.12
Few main features include:
1. SCMI transport as stand-alone drivers
Currently the SCMI transport layer is being built embedded into in
the core SCMI stack. Some of these transports, despite being currently
part of the main SCMI module, are indeed also registered with different
subsystems like optee or virtio, and actively probed also by those.
This leads to a few awkward and convoluted tricks to properly handle
such interactions at boot time in the SCMI stack.
This change adds the new logic to the core SCMI stack so that each
existing transport is transitioned to be a standi-alone driver. With
that all the probe deferral and awkward retries between the SCMI
core stack and the transports has been removed, since no more needed.
2. Support for obtaining transport descriptors from the devicetree
SCMI platform firmwares might have different designs depending on
the platform. Some of the transport descriptors rely on such design.
E.g. the maximum receive channel timeout value might vary depending
on the specific underlying hardware and firmware design choices.
This change adds support for max-rx-timeout-ms property to describe
the transport needs of a specific platform design. It will be extended
in the future to obtain other such hardware/firmware dependent
transport related descriptors.
3. NXP i.MX95 specific SCMI vendor protocol extensions
SCMI specification allows vendor or platform-specific extensions to
the interface. NXP i.MX95 System Manager(SM) that implements SCMI
extends the interface to implement couple of vendor/platform specific
protocol, namely:
a. Battery Backed Module(BBM) Protocol
This protocol is intended provide access to the battery-backed
module. This contains persistent storage (GPR), an RTC, and the
ON/OFF button. The protocol can also provide access to similar
functions implemented via external board components.
b. MISC Protocol for misc settings
This includes controls that are misc settings/actions that must
be exposed from the SM to agents. They are device specific and
are usually define to access bit fields in various mix block
control modules, IOMUX_GPR, and other GPR/CSR owned by the SM.
4. SCMI debug/tracking metrics
Since SCMI involves interaction with the entity(software, firmware
and/or hardware) providing services or features, it is quite useful
to track certain metrics(for pure debugging purposes) like how many
messages were sent or received, were there any failures, what kind
of failures, ..etc. This feature adds support for the same via debugfs.
Apart from these main features, there are some miscellaneous updates, fixes
and cleanups.
* tag 'scmi-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (31 commits)
rtc: support i.MX95 BBM RTC
input: keyboard: support i.MX95 BBM module
firmware: imx: Add i.MX95 MISC driver
firmware: arm_scmi: Add initial support for i.MX MISC protocol
firmware: arm_scmi: Add initial support for i.MX BBM protocol
firmware: arm_scmi: Add NXP i.MX95 SCMI documentation
dt-bindings: firmware: Add i.MX95 SCMI Extension protocol
firmware: arm_scmi: Replace comma with the semicolon
firmware: arm_scmi: Replace the use of of_node_put() to __free(device_node)
firmware: arm_scmi: Fix trivial whitespace/coding style issues
firmware: arm_scmi: Use max-rx-timeout-ms from devicetree
dt-bindings: firmware: arm,scmi: Introduce property max-rx-timeout-ms
firmware: arm_scmi: Remove const from transport descriptors
firmware: arm_scmi: Simplify with scoped for each OF child loop
firmware: arm_scmi: Update various protocols versions
firmware: arm_scmi: Remove legacy transport-layer code
firmware: arm_scmi: Make VirtIO transport a standalone driver
firmware: arm_scmi: Make OPTEE transport a standalone driver
firmware: arm_scmi: Make SMC transport a standalone driver
firmware: arm_scmi: Make MBOX transport a standalone driver
...
Link: https://lore.kernel.org/r/20240830135918.2383664-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull input fix from Dmitry Torokhov:
- a fix for Cypress PS/2 touchpad for regression introduced in 6.11
merge window where a timeout condition is incorrectly reported for
all extended Cypress commands
* tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cypress_ps2 - fix waiting for command response
Commit 8bccf667f6 ("Input: cypress_ps2 - report timeouts when reading
command status") uncovered an existing problem with cypress_ps2 driver:
it tries waiting on a PS/2 device waitqueue without using the rest of
libps2. Unfortunately without it nobody signals wakeup for the
waiting process, and each "extended" command was timing out. But the
rest of the code simply did not notice it.
Fix this by switching from homegrown way of sending request to get
command response and reading it to standard ps2_command() which does
the right thing.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Fixes: 8bccf667f6 ("Input: cypress_ps2 - report timeouts when reading command status")
Link: https://lore.kernel.org/r/a8252e0f-dab4-ef5e-2aa1-407a6f4c7204@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The BBM module provides BUTTON feature. To i.MX95, this module
is managed by System Manager and exported using System Management
Control Interface(SCMI). Linux could use i.MX SCMI BBM Extension
protocol to use BUTTON feature.
This driver is to use SCMI interface to enable pwrkey.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-7-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Pull input fixes from Dmitry Torokhov:
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes
* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: himax_hx83112b - fix incorrect size when reading product ID
Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
Input: uinput - reject requests with unreasonable number of slots
Input: edt-ft5x06 - add support for FocalTech FT8201
dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
Input: adc-joystick - fix optional value handling
Input: synaptics - enable SMBus for HP Elitebook 840 G2
Input: ads7846 - ratelimit the spi_sync error message
On s3 resume the i8042 driver tries to restore the controller to a known
state by reinitializing things, however this can confuse the controller
with different effects. Mostly occasionally unresponsive keyboards after
resume.
These issues do not rise on s0ix resume as here the controller is assumed
to preserved its state from before suspend.
This patch adds a quirk for devices where the reinitialization on s3 resume
is not needed and might be harmful as described above. It does this by
using the s0ix resume code path at selected locations.
This new quirk goes beyond what the preexisting reset=never quirk does,
which only skips some reinitialization steps.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104183118.779778-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The cyttsp4 touchscreen driver was contributed in 2013 and since then
has seen no updates. The driver uses platform data (no device tree
support) and there are no users of it in the mainline kernel. There were
occasional fixes to it for issues either found by static code analysis
tools or via visual inspection, but otherwise the driver is completely
untested.
Remove the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/ZrAZ2cUow_z838tp@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver does not try to power down the rails at system suspend or
when touchscreen is not in use, but rather enables regulators at probe
time. Power savings are achieved by requesting the controller to enter
low power mode.
Switch to devm_regulator_bulk_get_enable() instead of separately
requesting regulators, enabling them, and installing a custom
devm-action to disable them on unbind/remove, which simplifies the
code.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZrAgj9rG6oVqfdoK@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of setting irq_set_irq_wake() directly in probe(), mark the device
as wakeup-capable, and use enable_irq_wake() and disable_irq_wake() in
suspend/resume path.
This also allows changing the wakeup setting dynamically at runtime using
/sys/devices/.../tsc2005/power/wakeup.
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240711172719.1248373-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When the driver has been converted to use gpiod API it was requesting
and asserting the reset on probe, but never deasserted it. However
because of incorrect annotations in device tree marking reset line as
active high whereas in reality it is active low, the end result was
that the chip was never reset on probe. With polarity of the reset line
now corrected this became a problem.
Fix this by calling tsc200x_reset() from tsc200x_probe() to properly
complete the reset sequence and move requesting the reset GPIO and VIO
supply closer to the point where we need to start talking to the
hardware.
Fixes: d257f2980f ("Input: tsc2005 - convert to gpiod")
Link: https://lore.kernel.org/r/20240711172719.1248373-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The chip needs to be powered up before calling tsc200x_stop_scan() which
communicates with it; move the call to enable the regulator earlier in
tsc200x_probe().
At the same time switch to using devm_regulator_get_enable() to simplify
error handling. This also makes sure that regulator is not shut off too
early when unbinding the driver.
Link: https://lore.kernel.org/r/20240711172719.1248373-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use of_property_present() to test for property presence rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-14-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The abs-fuzz and abs-flat properties are documented as optional. When
these are absent, fwnode_property_read_u32() will leave the input
unchanged, meaning that an axis either picks up the value for the
previous axis or an uninitialized value.
Explicitly set these values to zero when they are unspecified to match
the documented behaviour in the device tree bindings.
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240731093310.3696919-1-jkeeping@inmusicbrands.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We only had a couple of array[] declarations, and changing them to just
use 'MAX()' instead of 'max()' fixes the issue.
This will allow us to simplify our min/max macros enormously, since they
can now unconditionally use temporary variables to avoid using the
argument values multiple times.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
Pull input updates from Dmitry Torokhov:
- streamlined logic in input core for handling normal input handlers vs
input filters
- updates to input drivers to allocate memory with sizeof(*pointer)
instead of sizeof(type)
- change to ads7846 touchscreen driver to use hsync GPIO instead of
requiring platform data with special method (which is not compatible
with boards using device tree)
- update to adc-joystick driver to handle inverted axes
- cleanups in various drivers switching them to use the new "guard" and
"__free()" facilities
- changes to several drivers (adxl34x, atmel_mxt_ts, ati-remote2,
omap-keypad, yealink) to stop creating driver-specific device
attributes manually and use driver core facilities for this
- update to Cypress PS/2 protocol driver to properly handle errors from
the PS/2 transport as well as other cleanups
- update to edt-ft5x06 driver to support ft5426 variant
- update to ektf2127 driver to support ektf2232 variant
- update to exc3000 driver to support EXC81W32 variant
- update to imagis driver to support IST3038 variant
- other assorted driver cleanups.
* tag 'input-for-v6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits)
Input: yealink - simplify locking in sysfs attribute handling
Input: yealink - use driver core to instantiate device attributes
Input: ati-remote2 - use driver core to instantiate device attributes
Input: omap-keypad - use driver core to instantiate device attributes
Input: atmel_mxt_ts - use driver core to instantiate device attributes
Input: exc3000 - add EXC81W32 support
dt-bindings: input: touchscreen: exc3000: add EXC81W32
Input: twl4030-pwrbutton - fix kernel-doc warning
Input: himax_hx83112b - add support for HX83100A
Input: himax_hx83112b - add himax_chip struct for multi-chip support
Input: himax_hx83112b - implement MCU register reading
Input: himax_hx83112b - use more descriptive register defines
dt-bindings: input: touchscreen: himax,hx83112b: add HX83100A
Input: do not check number of events in input_pass_values()
Input: preallocate memory to hold event values
Input: rearrange input_alloc_device() to prepare for preallocating of vals
Input: simplify event handling logic
Input: make events() method return number of events processed
Input: make sure input handlers define only one processing method
Input: evdev - remove ->event() method
...
