Pull drm fixes from Dave Airlie:
"Things do seem to have finally settled down, just four i915 and one
amdgpu this week. Probably won't have much for next week if you do
push rc8 out.
i915:
- Fix dram info readout
- Remove non-existent pipes from bigjoiner pipe mask
- Fix negative value passed as remaining time
- Never return 0 if not all requests retired
amdgpu:
- VCN fix for vangogh"
* tag 'drm-fixes-2022-12-02' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: enable Vangogh VCN indirect sram mode
drm/i915: Never return 0 if not all requests retired
drm/i915: Fix negative value passed as remaining time
drm/i915: Remove non-existent pipes from bigjoiner pipe mask
drm/i915/mtl: Fix dram info readout
Pull misc hotfixes from Andrew Morton:
"15 hotfixes, 11 marked cc:stable.
Only three or four of the latter address post-6.0 issues, which is
hopefully a sign that things are converging"
* tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
revert "kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible"
Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled
drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame
mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths
mm/khugepaged: fix GUP-fast interaction by sending IPI
mm/khugepaged: take the right locks for page table retraction
mm: migrate: fix THP's mapcount on isolation
mm: introduce arch_has_hw_nonleaf_pmd_young()
mm: add dummy pmd_young() for architectures not having it
mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes()
tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep"
nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry()
hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing
madvise: use zap_page_range_single for madvise dontneed
mm: replace VM_WARN_ON to pr_warn if the node is offline with __GFP_THISNODE
Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version.
The rc fix was done a different way when iommufd patches reworked this
code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Emulated VFIO devices are calling vfio_register_emulated_iommu_dev() and
consist of all the mdev drivers.
Like the physical drivers, support for iommufd is provided by the driver
supplying the correct standard ops. Provide ops from the core that
duplicate what vfio_register_emulated_iommu_dev() does.
Emulated drivers are where it is more likely to see variation in the
iommfd support ops. For instance IDXD will probably need to setup both a
iommfd_device context linked to a PASID and an iommufd_access context to
support all their mdev operations.
Link: https://lore.kernel.org/r/7-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
vfio container registers .dma_unmap() callback after the device is opened.
So it's fine for mdev drivers to initialize internal mapping cache in
.open_device(). See vfio_device_container_register().
Now with iommufd an access ops with an unmap callback is registered when
the device is bound to iommufd which is before .open_device() is
called. This implies gvt's .dma_unmap() could be called before its
internal mapping cache is initialized.
The fix is moving gvt mapping cache initialization to vGPU init. While at
it also move ptable initialization together.
Link: https://lore.kernel.org/r/20221202135402.756470-2-yi.l.liu@intel.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Trigger Mid-Command Buffer Preemption according to the priority of the software
rings and the hw fence signalling condition.
The muxer saves the locations of the indirect buffer frames from the software
ring together with the fence sequence number in its fifo queue, and pops out
those records when the fences are signalled. The locations are used to resubmit
packages in preemption scenarios by coping the chunks from the software ring.
v2: Update comment style.
v3: Fix conflict caused by previous modifications.
v4: Remove unnecessary prints.
v5: Fix corner cases for resubmission cases.
v6: Refactor functions for resubmission, calling fence_process in irq handler.
v7: Solve conflict for removing amdgpu_sw_ring.c.
v8: Add time threshold to judge if preemption request is needed.
v9: Correct comment spelling. Set fence emit timestamp before rsu assignment.
Cc: Christian Koenig <Christian.Koenig@amd.com>
Cc: Luben Tuikov <Luben.Tuikov@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Modify the unmap_queue package on gfx9. Add trailing fence to track the
preemption done.
2. Modify emit_ce_meta emit_de_meta functions for the resumed ibs.
v2: Restyle code not to use ternary operator.
v3: Modify code format.
v4: Enable Mid-Command Buffer Preemption for gfx9 by default.
v5: Optimize the flag bit set for emit_fence.
v6: Modify log message for preemption timeout.
Cc: Christian Koenig <Christian.Koenig@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Luben Tuikov <Luben.Tuikov@amd.com>
Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set ring functions with software ring callbacks on gfx9.
The software ring could be tested by debugfs_test_ib case.
v2: Set sw_ring 2 to enable software ring by default.
v3: Remove the parameter for software ring enablement.
v4: Use amdgpu_ring_init/fini for software rings.
v5: Update for code format. Fix conflict.
v6: Remove unnecessary checks and enable software ring on gfx9 by default.
v7: Use static array for software ring names and priorities.
v8: Stop creating software rings if no gfx ring existed.
Cc: Christian Koenig <Christian.Koenig@amd.com>
Cc: Luben Tuikov <Luben.Tuikov@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The software ring is created to support priority context while there is only
one hardware queue for gfx.
Every software ring has its fence driver and could be used as an ordinary ring
for the GPU scheduler.
Multiple software rings are bound to a real ring with the ring muxer. The
packages committed on the software ring are copied to the real ring.
v2: Use array to store software ring entry.
v3: Remove unnecessary prints.
v4: Remove amdgpu_ring_sw_init/fini functions,
using gtt for sw ring buffer for later dma copy
optimization.
v5: Allocate ring entry dynamically in the muxer.
v6: Update comments for the ring muxer.
v7: Modify for function naming.
v8: Combine software ring functions into amdgpu_ring_mux.c
v9: Use kernel-doc comment on the get_rptr function.
Cc: Christian Koenig <Christian.Koenig@amd.com>
Cc: Luben Tuikov <Luben.Tuikov@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, userspace doesn't have a way to communicate selective updates
to displays. So, enable support for FB_DAMAGE_CLIPS for DCN ASICs newer
than DCN301, convert DRM damage clips to dc dirty rectangles and fill
them into dirty_rects in fill_dc_dirty_rects().
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes DMCU initialization in APU GPU passthrough. The
DMCU needs the GPU physical address, not the CPU physical
address. This ends up working out on bare metal because
we always use the physical address, but doesn't work in
passthrough because the addresses are different.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under virtualization guest needs to receive notification from host to
perform reset in some cases. Add nv mailbox irq in soc21.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cheap monitors sometimes advertise YUV modes they don't really have
(HDMI specification mandates YUV support so even monitors without actual
support will often wrongfully advertise it) which results in YUV matches
and user forum complaints of a red tint to light colour display areas in
common desktop environments.
Moving the default RGB fall-back before YUV selection results in RGB
mode matching in most cases, reducing complaints.
Fixes: 6c3c719936 ("drm/bridge: synopsys: dw-hdmi: add bus format negociation")
Signed-off-by: Guillaume BRUN <the.cheaterman@gmail.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116143523.2126-1-the.cheaterman@gmail.com
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
commit cd5297b085 ("drm/etnaviv: Use FOLL_FORCE for userptr")
documents that FOLL_FORCE | FOLL_WRITE was really only used for reliable
R/O pinning.
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-15-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: David Airlie <airlied@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In case of Gen12 video and compute engines, TLB_INV registers are masked -
to modify one bit, corresponding bit in upper half of the register must
be enabled, otherwise nothing happens.
CVE: CVE-2022-4139
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 7938d61591 ("drm/i915: Flush TLBs before releasing backing store")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
According to the description in ti-sn65dsi86's datasheet:
CHA_HSYNC_POLARITY:
0 = Active High Pulse. Synchronization signal is high for the sync
pulse width. (default)
1 = Active Low Pulse. Synchronization signal is low for the sync
pulse width.
CHA_VSYNC_POLARITY:
0 = Active High Pulse. Synchronization signal is high for the sync
pulse width. (Default)
1 = Active Low Pulse. Synchronization signal is low for the sync
pulse width.
We should only set these bits when the polarity is negative.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Qiqi Zhang <eddy.zhang@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125104558.84616-1-eddy.zhang@rock-chips.com
Users of intel_gt_retire_requests_timeout() expect 0 return value on
success. However, we have no protection from passing back 0 potentially
returned by a call to dma_fence_wait_timeout() when it succedes right
after its timeout has expired.
Replace 0 with -ETIME before potentially using the timeout value as return
code, so -ETIME is returned if there are still some requests not retired
after timeout, 0 otherwise.
v3: Use conditional expression, more compact but also better reflecting
intention standing behind the change.
v2: Move the added lines down so flush_submission() is not affected.
Fixes: f33a8a5160 ("drm/i915: Merge wait_for_timelines with retire_request")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-3-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f301a29f14)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit b97060a99b ("drm/i915/guc: Update intel_gt_wait_for_idle to work
with GuC") extended the API of intel_gt_retire_requests_timeout() with an
extra argument 'remaining_timeout', intended for passing back unconsumed
portion of requested timeout when 0 (success) is returned. However, when
request retirement happens to succeed despite an error returned by a call
to dma_fence_wait_timeout(), that error code (a negative value) is passed
back instead of remaining time. If we then pass that negative value
forward as requested timeout to intel_uc_wait_for_idle(), an explicit BUG
will be triggered.
If request retirement succeeds but an error code is passed back via
remaininig_timeout, we may have no clue on how much of the initial timeout
might have been left for spending it on waiting for GuC to become idle.
OTOH, since all pending requests have been successfully retired, that
error code has been already ignored by intel_gt_retire_requests_timeout(),
then we shouldn't fail.
Assume no more time has been left on error and pass 0 timeout value to
intel_uc_wait_for_idle() to give it a chance to return success if GuC is
already idle.
v3: Don't fail on any error passed back via remaining_timeout.
v2: Fix the issue on the caller side, not the provider.
Fixes: b97060a99b ("drm/i915/guc: Update intel_gt_wait_for_idle to work with GuC")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f235dbd5b7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When transitioning FRL / DP2 is not required, we will always request
DTBCLK = 0Mhz, but PMFW returns the min freq
- This causes us to make DTBCLK requests every time we call optimize
after transitioning from FRL to non-FRL
- If DTBCLK is not required, request the min instead (then we only need
to make 1 extra request at boot time)
- Also when programming PIPE_DTO_SRC_SEL, don't programming for DP
first, just programming once for the required selection (programming
DP on an HDMI connection then switching back causes corruption)
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Tests need to tell if display is connected via USB4 DPIA link.
Currently this is only possible via analyzing dmesg logs.
[How]
Create a per-connector debugfs entry to report if the link is
tunneled via USB4 DPIA.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Output transfer function must be programmed per pipe as part of a front end
update when the plane changes, or output transfer function changes for a
given plane.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
