Add qxl_bo_pin_and_vmap() that pins and vmaps a buffer object in one
step. Update callers of the regular qxl_bo_vmap(). Fixes a bug where
qxl accesses an unpinned buffer object while it is being moved; such
as with the monitor-description BO. An typical error is shown below.
[ 4.303586] [drm:drm_atomic_helper_commit_planes] *ERROR* head 1 wrong: 65376256x16777216+0+0
[ 4.586883] [drm:drm_atomic_helper_commit_planes] *ERROR* head 1 wrong: 65376256x16777216+0+0
[ 4.904036] [drm:drm_atomic_helper_commit_planes] *ERROR* head 1 wrong: 65335296x16777216+0+0
[ 5.374347] [drm:qxl_release_from_id_locked] *ERROR* failed to find id in release_idr
Commit b33651a5c9 ("drm/qxl: Do not pin buffer objects for vmap")
removed the implicit pin operation from qxl's vmap code. This is the
correct behavior for GEM and PRIME interfaces, but the pin is still
needed for qxl internal operation.
Also add a corresponding function qxl_bo_vunmap_and_unpin() and remove
the old qxl_bo_vmap() helpers.
Future directions: BOs should not be pinned or vmapped unnecessarily.
The pin-and-vmap operation should be removed from the driver and a
temporary mapping should be established with a vmap_local-like helper.
See the client helper drm_client_buffer_vmap_local() for semantics.
v2:
- unreserve BO on errors in qxl_bo_pin_and_vmap() (Dmitry)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b33651a5c9 ("drm/qxl: Do not pin buffer objects for vmap")
Reported-by: David Kaplan <david.kaplan@amd.com>
Closes: https://lore.kernel.org/dri-devel/ab0fb17d-0f96-4ee6-8b21-65d02bb02655@suse.de/
Tested-by: David Kaplan <david.kaplan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux.dev
Cc: spice-devel@lists.freedesktop.org
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708142208.194361-1-tzimmermann@suse.de
to avoid reading wrong WPTR from doorbell in sriov vf, set
CP_HQD_PQ_DOORBELL_CONTROL.DOORBELL_MODE to 1 to read WPTR from MQD.
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V1: This patch enables following UMD stable Pstates profile
levels for power_dpm_force_performance_level interface.
- profile_peak
- profile_min_mclk
- profile_min_sclk
- profile_standard
V2: Fix conflict with commit "drm/amd/pm: smu v14.0.4 reuse smu v14.0.0 dpmtable "
V3: Add VCLK1 and DCLK1 support for SMU V14.0.1
And avoid to set VCLK1 and DCLK1 for SMU v14.0.0
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
- use unified event id to manage ras events
- add a new function amdgpu_ras_query_error_status_with_event() to accept
event type as parameter.
v2:
add a warn log to show the location of function failure
when calling amdgpu_ras_mark_event(). (Tao Zhou)
v3:
change RAS_EVENT_TYPE_ISR to RAS_EVENT_TYPE_FATAL.
v4:
rename amdgpu_ras_get_recovery_event() to
amdgpu_ras_get_fatal_error_event().
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In dm resume, we firstly restore dc state and do the mst resume for topology
probing thereafter. If we change dpcd DP_MSTM_CTRL value after LT in mst reume,
it will cause light up problem on the hub.
[How]
Revert commit 202dc359ad ("drm/amd/display: Defer handling mst up request in resume").
And adjust the reason to trigger dc_link_detect by DETECT_REASON_RESUMEFROMS3S4.
Cc: stable@vger.kernel.org
Fixes: 202dc359ad ("drm/amd/display: Defer handling mst up request in resume")
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remove redundant semicolons in RAS_EVENT_LOG to avoid
code format check warning.
Fixes: b712d7c201 ("drm/amdgpu: fix compiler 'side-effect' check issue for RAS_EVENT_LOG()")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While moving buffer which has dcc tiling config, it is needed to restore
its original dcc tiling.
1. extend copy flag to cover tiling bits
2. add logic to restore original dcc tiling config
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable redirection of irq for pagefaults for specific
clients to avoid overflow without dropping interrupts.
So here we redirect the interrupts to another IH ring
i.e ring1 where only these interrupts are processed.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need IH ring1 for handling the pagefault
interrupts which over flow in default
ring for specific usecases.
Enable ring1 allows software to redirect
high interrupts to ring1 from default IH
ring.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If VF request full GPU access and the request failed,
the VF driver can get stuck accessing registers for an extended period during
the unload of KMS.
[How]
Set no_hw_access flag when VF request for full GPU access fails
This prevents further hardware access attempts, avoiding the prolonged
stuck state.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the process of adding support for shared IRQ pins, a scenario
was accidentally created where adv7511_irq_process returned
prematurely causing the EDID to fail randomly.
Since the interrupt handler is broken up into two main helper functions,
update both of them to treat the helper functions as IRQ handlers. These
IRQ routines process their respective tasks as before, but if they
determine that actual work was done, mark the respective IRQ status
accordingly, and delay the check until everything has been processed.
This should guarantee the helper functions don't return prematurely
while still returning proper values of either IRQ_HANDLED or IRQ_NONE.
Reported-by: Liu Ying <victor.liu@nxp.com>
Fixes: f3d9683346 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Liu Ying <victor.liu@nxp.com> # i.MX8MP EVK ADV7535 EDID retrieval w/o IRQ
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240630221931.1650565-1-aford173@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
V3: Remove unnecessary declaration of ret by evaluating the return
code of regmap_read directly.
V2: Fix uninitialized cec_status
Cut back a little on error handling to return either IRQ_NONE or
IRQ_HANDLED.
Updates for v6.11
Core:
- SM7150 support
DPU:
- SM7150 support
- Fix DSC support for DSI panels in video mode
- Fixed TE vsync source support for DSI command-mode panels
- Fix for devices without UBWC in the display controller (ie.
QCM2290)
DSI:
- Remove unused register-writing wrappers
- Fix DSC support for panels in video mode
- Add support for parsing TE vsync source
- Add support for MSM8937 (28nm DSI PHY)
MDP5:
- Add support for MSM8937
- Fix configuration for MSM8953
GPU:
- Split giant device table into per-gen "hw catalog" similar to
what is done on the display side of the driver
- Fix a702 UBWC mode
- Fix unused variably warnings
- GPU memory traces
- Add param for userspace to know if raytracing is supported
- Memory barrier cleanup and GBIF unhalt fix
- X185 support (aka gpu in X1 laptop chips)
- a505 support
- fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvZQpYEHpSCgXGJ2kaHJDK6QFAFfTsfiWm4b2zZOnjXGw@mail.gmail.com
Mediatek DRM Next for Linux 6.11
1. Convert to platform remove callback returning void
2. Drop chain_mode_fixup call in mode_valid()
3. Fixes the errors of MediaTek display driver found by IGT.
4. Add display support for the MT8365-EVK board
5. Fix bit depth overwritten for mtk_ovl_set bit_depth()
6. Remove less-than-zero comparison of an unsigned value
7. Call drm_atomic_helper_shutdown() at shutdown time
8. Log errors in probe with dev_err_probe()
9. Fix possible_crtcs calculation
10. Fix spurious kfree()
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628134632.28672-1-chunkuang.hu@kernel.org
The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.
Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A couple copy/paste mistakes in the code that selects steering targets
for OADDRM and INSTANCE0 unintentionally clobbered the steering target
for DSS ranges in some cases.
The OADDRM/INSTANCE0 values were also not assigned as intended, although
that mistake wound up being harmless since the desired values for those
specific ranges were '0' which the kzalloc of the GT structure should
have already taken care of implicitly.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626210536.1620176-2-matthew.d.roper@intel.com
(cherry picked from commit 4f82ac6102)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
If a queue is already assigned to the hardware, then a newly submitted
job can start straight away without waiting for the tick. However in
this case the devfreq infrastructure isn't notified that the GPU is
busy. By the time the tick happens the job might well have finished and
no time will be accounted for the GPU being busy.
Fix this by recording the GPU as busy directly in queue_run_job() in the
case where there is a CSG assigned and therefore we just ring the
doorbell.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703155646.80928-1-steven.price@arm.com
