Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Increase the code readability by moving the no_perf/no_msr flag and the
cai->perf_name/cai->msr sanity checks into the counter probe functions.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_msr_perf_counter_() and move all the logic to
add_msr_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_rapl_perf_counter_() and move all the logic to
add_rapl_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Quit early for unsupported RAPL counters.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
rapl_joules bit should always be checked even if
platform_features->rapl_msrs is not set or no_msr flag is used.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 05a2f07db8 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db8 ("tools/power turbostat: read RAPL counters via perf")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr,
updates error messages and permission checks to reflect the Android
device path, and wraps platform-specific code with #if defined(ANDROID)
to ensure correct behavior on both Android and non-Android systems.
These changes improve compatibility and usability of turbostat on
Android devices.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull x86 platform drivers updates from Ilpo Järvinen:
"The changes are mostly business as usual. Besides pdx86 changes, there
are a few power supply changes needed for related pdx86 features, move
of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version
warning to hid-asus.
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi:
- Add driver for Dasharo devices supporting fans and temperatures
monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace
using power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering
more than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to
new variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the
enlarged scope
- power supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and
"cell imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits)
thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops
platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m
platform/x86: asus-wmi: fix build without CONFIG_SUSPEND
docs: ABI: Fix "aassociated" to "associated"
platform/x86: Add AMD ISP platform config for OV05C10
Documentation: admin-guide: pm: Add documentation for die_id
platform/x86/intel-uncore-freq: Add attributes to show die_id
platform/x86/intel: power-domains: Add interface to get Linux die ID
Documentation: admin-guide: pm: Add documentation for agent_types
platform/x86/intel-uncore-freq: Add attributes to show agent types
platform/x86/tuxedo: Prevent invalid Kconfig state
platform/x86: dell-ddv: Expose the battery health to userspace
platform/x86: dell-ddv: Expose the battery manufacture date to userspace
platform/x86: dell-ddv: Implement the battery matching algorithm
power: supply: core: Add additional health status values
platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry
platform/x86/amd/hsmp: Report power via hwmon sensors
platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules
platform/mellanox: mlxreg-dpu: Fix smatch warnings
platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug
...
Pull power management updates from Rafael Wysocki:
"Once again, the changes are dominated by cpufreq updates, but this
time the majority of them are cpufreq core changes, mostly related to
the introduction of policy locking guards and __free() usage, and
fixes related to boost handling.
Still, there is also a significant update of the intel_pstate driver
making it register an energy model when running on a hybrid platform
which is used for enabling energy-aware scheduling (EAS) if the driver
operates in the passive mode (and schedutil is used as the cpufreq
governor for all CPUs which is the passive mode default).
There are some amd-pstate driver updates too, for a good measure,
including the "Requested CPU Min frequency" BIOS option support and
new online/offline callbacks.
In the cpuidle space, the most significant change is the addition of a
C1 demotion on/off sysfs knob to intel_idle which should help some
users to configure their systems more precisely. There is also the
conversion of the PSCI cpuidle driver to a faux device one and there
are two small updates of cpuidle governors.
Device power management is also modified quite a bit, especially the
handling of devices with asynchronous suspend and resume enabled
during system transitions. They are now going to be handled more
asynchronously during suspend transitions and somewhat less
aggressively during resume transitions.
Apart from the above, the operating performance points (OPP) library
is now going to use mutex locking guards and scope-based cleanup
helpers and there is the usual bunch of assorted fixes and code
cleanups.
Specifics:
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian)
- Fix typos in energy model documentation and example driver code
(Moon Hee Lee, Atul Kumar Pant)
- Rearrange the energy model management code and add a new function
for adjusting a CPU energy model after adjusting the capacity of
the given CPU to it (Rafael Wysocki)
- Refactor cpufreq_online(), add and use cpufreq policy locking
guards, use __free() in policy reference counting, and clean up
core cpufreq code on top of that (Rafael Wysocki)
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar)
- Fix des_perf clamping with max_perf in amd_pstate_update()
(Dhananjay Ugwekar)
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it
(Dhananjay Ugwekar)
- Add support for the "Requested CPU Min frequency" BIOS option to
the amd-pstate driver (Dhananjay Ugwekar)
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal)
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor)
- Add helper for governor checks to the schedutil cpufreq governor
and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)
- Populate the cpu_capacity sysfs entries from the intel_pstate
driver after registering asym capacity support (Ricardo Neri)
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki)
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab)
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu)
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng)
- OPP: Add dev_pm_opp_set_level() (Praveen Talari)
- Introduce scope-based cleanup headers and mutex locking guards in
OPP core (Viresh Kumar)
- Switch OPP to use kmemdup_array() (Zhang Enpei)
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
the menu cpuidle governor (Zhongqiu Han)
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy)
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant)
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla)
- Move debug runtime PM attributes to runtime_attrs[] (Rafael
Wysocki)
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás)
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum)
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki)
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel)
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang)
- Add missing wakeup source attribute relax_count to sysfs and remove
the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu)
- Add configurable pm_test delay for hibernation (Zihuan Zhang)
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter)
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki)
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"
* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
OPP: switch to use kmemdup_array()
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
PM: sleep: Introduce pm_sleep_transition_in_progress()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
PM: EM: Introduce em_adjust_cpu_capacity()
PM: EM: Move CPU capacity check to em_adjust_new_capacity()
PM: EM: Documentation: Fix typos in example driver code
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
PM: sleep: Introduce pm_suspend_in_progress()
...
Merge a cpupower utility update for 6.16-rc1 that adds a systemd service
to run cpupower and changes binding's Makefile to use -lcpupower (John B.
Wyatt IV, Francesco Poli).
* pm-tools:
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
cpupower: change binding's makefile to use -lcpupower
cpupower: add a systemd service to run cpupower
This version includes the following changes:
- Displays SST-PP2 revision fields.
- Skips updating uncore frequency limits on newer generations of CPUs.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
On SST PP level switch, skip adjusting the uncore frequency limit and
allow the hardware to handle this on newer platforms.
As newer generations of CPUs have changed the extended family identifier,
use this identifier to exclude the update.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
One of the most typical use cases of the 'cpupower' utility works as
follows: run 'cpupower' at boot with the desired command-line options
and then forget about it.
Add a systemd service (disabled by default) that automates this use
case (for environments where the initialization system is 'systemd'),
by running 'cpupower' at boot with the settings read from a default
configuration file.
The systemd service, the associated support script and the
corresponding default configuration file are derived from what is
provided by the Arch Linux package (under "GPL-2.0-or-later" terms),
modernized and enhanced in various ways (the script has also been
checked with 'shellcheck').
Link: dd2e2a311e
Signed-off-by: Francesco Poli (wintermute) <invernomuto@paranoici.org>
Reviewed-by: John B. Wyatt IV <jwyatt@redhat.com>
Reviewed-by: John B. Wyatt IV <sageofredondo@gmail.com>
Tested-by: John B. Wyatt IV <jwyatt@redhat.com>
Tested-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Other messages are occasionally printed between these two, for example:
[203104.106534] Restarting tasks ...
[203104.106559] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[203104.112354] done.
This seems to be a timing issue, seen in two of the eleven
hibernation exits in my current `dmesg` output.
When printed on its own, the "done" message has the default log level.
This makes the output of `dmesg --level=warn` quite misleading.
Add enough context for the "done" messages to make sense on their own,
and use the same log level for all messages.
Change the messages to "<event>..." / "Done <event>.", unlike a449dfbfc0
which uses "<event>..." / "<event> completed.". Front-loading the unique
part of the message makes it easier to scan the log, and reduces ambiguity
for users who aren't confident in their English comprehension.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Andrew Sayers <kernel.org@pileofstuff.org>
Link: https://patch.msgid.link/20250411152632.2806038-1-kernel.org@pileofstuff.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes
Signed-off-by: Len Brown <len.brown@intel.com>
Create "pct_idle" counter group, the sofware notion of residency
so it can now be singled out, independent of other counter groups.
Create "cpuidle" group, the cpuidle invocation counts.
Disable "cpuidle", by default.
Create "swidle" = "cpuidle" + "pct_idle".
Undocument "sysfs", the old name for "swidle", but keep it working
for backwards compatibilty.
Create "hwidle", all the HW idle counters
Modify "idle", enabled by default
"idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle")
Signed-off-by: Len Brown <len.brown@intel.com>
Probe cpuidle "sysfs" residency and counts separately,
since soon we will make one disabled on, and the
other disabled off.
Clarify that some BIC (build-in-counters) are actually "groups".
since we're about to re-name some of those groups.
no functional change.
Signed-off-by: Len Brown <len.brown@intel.com>
Do fflush() to discard the buffered data, before each read of the
graphics sysfs knobs.
Fixes: ba99a4fc8c ("tools/power turbostat: Remove unnecessary fflush() call")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Document that on Intel Granite Rapids Systems,
Uncore domains 0-2 are CPU domains, and
uncore domains 3-4 are IO domains.
Signed-off-by: Len Brown <len.brown@intel.com>
The CoreThr column displays total thermal throttling events
since boot time.
Change it to report events during the measurement interval.
This is more useful for showing a user the current conditions.
Total events since boot time are still available to the user via
/sys/devices/system/cpu/cpu*/thermal_throttle/*
Document CoreThr on turbostat.8
Fixes: eae97e053f ("turbostat: Support thermal throttle count print")
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Chen Yu <yu.c.chen@intel.com>
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output:
"turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151"
A similar error appears with the use of turbostat --cpu when the inputted cpu
range contains a cpu number >= 1024:
# turbostat -c 1100-1151
"--cpu 1100-1151" malformed
...
Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS.
It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low.
For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS
brings support for parsing cpu numbers >= 1024.
Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64.
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull printk updates from Petr Mladek:
- New option "printk.debug_non_panic_cpus" allows to store printk
messages from non-panic CPUs during panic. It might be useful when
panic() fails. It is disabled by default because it increases the
chance to see the messages printed before panic() and on the
panic-CPU.
- New build option "CONFIG_NULL_TTY_DEFAULT_CONSOLE" allows to build
kernel without the virtual terminal support which prefers ttynull
over serial console.
- Do not unblank suspended consoles.
- Some code clean up.
* tag 'printk-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/panic: Add option to allow non-panic CPUs to write to the ring buffer.
printk: Add an option to allow ttynull to be a default console device
printk: Check CON_SUSPEND when unblanking a console
printk: Rename console_start to console_resume
printk: Rename console_stop to console_suspend
printk: Rename resume_console to console_resume_all
printk: Rename suspend_console to console_suspend_all
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
Pull power management updates from Rafael Wysocki:
"These are dominated by cpufreq updates which in turn are dominated by
updates related to boost support in the core and drivers and
amd-pstate driver optimizations.
Apart from the above, there are some cpuidle updates including a
rework of the most recent idle intervals handling in the venerable
menu governor that leads to significant improvements in some
performance benchmarks, as the governor is now more likely to predict
a shorter idle duration in some cases, and there are updates of the
core device power management code, mostly related to system suspend
and resume, that should help to avoid potential issues arising when
the drivers of devices depending on one another want to use different
optimizations.
There is also a usual collection of assorted fixes and cleanups,
including removal of some unused code.
Specifics:
- Manage sysfs attributes and boost frequencies efficiently from
cpufreq core to reduce boilerplate code in drivers (Viresh Kumar)
- Minor cleanups to cpufreq drivers (Aaron Kling, Benjamin Schneider,
Dhananjay Ugwekar, Imran Shaik, zuoqian)
- Migrate some cpufreq drivers to using for_each_present_cpu() (Jacky
Bai)
- cpufreq-qcom-hw DT binding fixes (Krzysztof Kozlowski)
- Use str_enable_disable() helper in cpufreq_online() (Lifeng Zheng)
- Optimize the amd-pstate driver to avoid cases where call paths end
up calling the same writes multiple times and needlessly caching
variables through code reorganization, locking overhaul and tracing
adjustments (Mario Limonciello, Dhananjay Ugwekar)
- Make it possible to avoid enabling capacity-aware scheduling (CAS)
in the intel_pstate driver and relocate a check for out-of-band
(OOB) platform handling in it to make it detect OOB before checking
HWP availability (Rafael Wysocki)
- Fix dbs_update() to avoid inadvertent conversions of negative
integer values to unsigned int which causes CPU frequency selection
to be inaccurate in some cases when the "conservative" cpufreq
governor is in use (Jie Zhan)
- Update the handling of the most recent idle intervals in the menu
cpuidle governor to prevent useful information from being discarded
by it in some cases and improve the prediction accuracy (Rafael
Wysocki)
- Make it possible to tell the intel_idle driver to ignore its
built-in table of idle states for the given processor, clean up the
handling of auto-demotion disabling on Baytrail and Cherrytrail
chips in it, and update its MAINTAINERS entry (David Arcari, Artem
Bityutskiy, Rafael Wysocki)
- Make some cpuidle drivers use for_each_present_cpu() instead of
for_each_possible_cpu() during initialization to avoid issues
occurring when nosmp or maxcpus=0 are used (Jacky Bai)
- Clean up the Energy Model handling code somewhat (Rafael Wysocki)
- Use kfree_rcu() to simplify the handling of runtime Energy Model
updates (Li RongQing)
- Add an entry for the Energy Model framework to MAINTAINERS as
properly maintained (Lukasz Luba)
- Address RCU-related sparse warnings in the Energy Model code
(Rafael Wysocki)
- Remove ENERGY_MODEL dependency on SMP and allow it to be selected
when DEVFREQ is set without CPUFREQ so it can be used on a wider
range of systems (Jeson Gao)
- Unify error handling during runtime suspend and runtime resume in
the core to help drivers to implement more consistent runtime PM
error handling (Rafael Wysocki)
- Drop a redundant check from pm_runtime_force_resume() and rearrange
documentation related to __pm_runtime_disable() (Rafael Wysocki)
- Rework the handling of the "smart suspend" driver flag in the PM
core to avoid issues hat may occur when drivers using it depend on
some other drivers and clean up the related PM core code (Rafael
Wysocki, Colin Ian King)
- Fix the handling of devices with the power.direct_complete flag set
if device_suspend() returns an error for at least one device to
avoid situations in which some of them may not be resumed (Rafael
Wysocki)
- Use mutex_trylock() in hibernate_compressor_param_set() to avoid a
possible deadlock that may occur if the "compressor" hibernation
module parameter is accessed during the registration of a new
ieee80211 device (Lizhi Xu)
- Suppress sleeping parent warning in device_pm_add() in the case
when new children are added under a device with the
power.direct_complete set after it has been processed by
device_resume() (Xu Yang)
- Remove needless return in three void functions related to system
wakeup (Zijun Hu)
- Replace deprecated kmap_atomic() with kmap_local_page() in the
hibernation core code (David Reaver)
- Remove unused helper functions related to system sleep (David Alan
Gilbert)
- Clean up s2idle_enter() so it does not lock and unlock CPU offline
in vain and update comments in it (Ulf Hansson)
- Clean up broken white space in dpm_wait_for_children() (Geert
Uytterhoeven)
- Update the cpupower utility to fix lib version-ing in it and memory
leaks in error legs, remove hard-coded values, and implement CPU
physical core querying (Thomas Renninger, John B. Wyatt IV, Shuah
Khan, Yiwei Lin, Zhongqiu Han)"
* tag 'pm-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (139 commits)
PM: sleep: Fix bit masking operation
dt-bindings: cpufreq: cpufreq-qcom-hw: Narrow properties on SDX75, SA8775p and SM8650
dt-bindings: cpufreq: cpufreq-qcom-hw: Drop redundant minItems:1
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing constraint for interrupt-names
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS8300 compatible
cpufreq: Init cpufreq only for present CPUs
PM: sleep: Fix handling devices with direct_complete set on errors
cpuidle: Init cpuidle only for present CPUs
PM: clk: Remove unused pm_clk_remove()
PM: sleep: core: Fix indentation in dpm_wait_for_children()
PM: s2idle: Extend comment in s2idle_enter()
PM: s2idle: Drop redundant locks when entering s2idle
PM: sleep: Remove unused pm_generic_ wrappers
cpufreq: tegra186: Share policy per cluster
cpupower: Make lib versioning scheme more obvious and fix version link
PM: EM: Rework the depends on for CONFIG_ENERGY_MODEL
PM: EM: Address RCU-related sparse warnings
cpupower: Implement CPU physical core querying
pm: cpupower: remove hard-coded topology depth values
pm: cpupower: Fix cmd_monitor() error legs to free cpu_topology
...
library versioning was broken:
libcpupower.so.0.0.1
libcpupower.so -> libcpupower.so.0.0.1
libcpupower.so.1 -> libcpupower.so.0.0.1
and is fixed by this patch to:
libcpupower.so.1.0.1
libcpupower.so -> libcpupower.so.1.0.1
libcpupower.so.1 -> libcpupower.so.1.0.1
Link: https://lore.kernel.org/r/20250307094334.39587-1-trenn@suse.de
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <shuah@kernel.org>
This version has fix for:
- Display of die ID and optimize array size for multi package
systems.
- Fix build warning with cross compiler
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
This helps when using a cross-compiler for building intel-speed-select,
currently, its hardcoded to pick libnl3 headers from build host which may
not be same as build target when cross compiling.
cc -print-sysroot will print nothing if compiler is configured without
a sysroot and result in same string as it is now.
Fixes errors with gcc configured with host include poisoning e.g.
cc1: error: include location "/usr/include/libnl3" is unsafe for
cross-compilation [-Werror=poison-system-directories]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
[ srinivas: Changelog edits for checkpatch warning ]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
