When driver handles the napi rx polling requests, the netdev might
have been released by the dellink logic triggered by the disconnect
operation on user plane. However, in the logic of processing skb in
polling, an invalid netdev is still being used, which causes a panic.
BUG: kernel NULL pointer dereference, address: 00000000000000f1
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:dev_gro_receive+0x3a/0x620
[...]
Call Trace:
<IRQ>
? __die_body+0x68/0xb0
? page_fault_oops+0x379/0x3e0
? exc_page_fault+0x4f/0xa0
? asm_exc_page_fault+0x22/0x30
? __pfx_t7xx_ccmni_recv_skb+0x10/0x10 [mtk_t7xx (HASH:1400 7)]
? dev_gro_receive+0x3a/0x620
napi_gro_receive+0xad/0x170
t7xx_ccmni_recv_skb+0x48/0x70 [mtk_t7xx (HASH:1400 7)]
t7xx_dpmaif_napi_rx_poll+0x590/0x800 [mtk_t7xx (HASH:1400 7)]
net_rx_action+0x103/0x470
irq_exit_rcu+0x13a/0x310
sysvec_apic_timer_interrupt+0x56/0x90
</IRQ>
Fixes: 5545b7b9f2 ("net: wwan: t7xx: Add NAPI support")
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Link: https://patch.msgid.link/20250530031648.5592-1-jinjian.song@fibocom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- make it possible to set hid_mouse_ignore_list dynamically (the same way we
handle other quirks) (Aditya Garg)
- fix potential OOB in usbhid_parse() (Terry Junge)
[WHY]
1. Drivers using DRM_GEM_SHADOW_PLANE_HELPER_FUNCS and
DRM_GEM_SHMEM_DRIVER_OPS (e.g., udl, ast) do not require
sg_table import.
They only need dma_buf_vmap() to access the shared buffer's
kernel virtual address.
2. On certain Aspeed-based boards, a dma_mask of 0xffff_ffff may
trigger SWIOTLB during dmabuf import. However, IO_TLB_SEGSIZE
restricts the maximum DMA streaming mapping memory, resulting in
errors like:
ast 0000:07:00.0: swiotlb buffer is full (sz: 3145728 bytes), total 32768 (slots), used 0 (slots)
[HOW]
Provide a gem_prime_import implementation without sg_table mapping
to avoid issues (e.g., "swiotlb buffer is full"). Drivers that do not
require sg_table can adopt this.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250522070714.439824-1-oushixiong1025@163.com
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-05-30 (ice, idpf)
For ice:
Michal resolves XDP issues related to Tx scheduler configuration with
large number of Tx queues.
Additional information:
https://lore.kernel.org/intel-wired-lan/20250513105529.241745-1-michal.kubiak@intel.com/
For idpf:
Brian Vazquez updates netif_subqueue_maybe_stop() condition check to
prevent possible races.
Emil shuts down virtchannel mailbox during reset to reduce timeout
delays as it's unavailable during that time.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: avoid mailbox timeout delays during reset
idpf: fix a race in txq wakeup
ice: fix rebuilding the Tx scheduler tree for large queue counts
ice: create new Tx scheduler nodes for new queues only
ice: fix Tx scheduler error handling in XDP callback
====================
Link: https://patch.msgid.link/20250530211221.2170484-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull bootconfig updates from Masami Hiramatsu:
- Allow overriding CFLAGS and LDFLAGS for tools/bootconfig, for example
making it a static binary.
* tag 'bootconfig-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/bootconfig: specify LDFLAGS as an argument to CC
tools/bootconfig: allow overriding CFLAGS assignment
Pull module updates from Petr Pavlu:
- Make .static_call_sites in modules read-only after init
The .static_call_sites sections in modules have been made read-only
after init to avoid any (non-)accidental modifications, similarly to
how they are read-only after init in vmlinux
- The rest are minor cleanups
* tag 'modules-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: Remove outdated comment about text_size
module: Make .static_call_sites read-only after init
module: Add a separate function to mark sections as read-only after init
module: Constify parameters of module_enforce_rwx_sections()
Pull more MM updates from Andrew Morton:
- "zram: support algorithm-specific parameters" from Sergey Senozhatsky
adds infrastructure for passing algorithm-specific parameters into
zram. A single parameter `winbits' is implemented at this time.
- "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg
charging nmi-safe, which is required by BFP, which can operate in NMI
context.
- "Some random fixes and cleanup to shmem" from Kemeng Shi implements
small fixes and cleanups in the shmem code.
- "Skip mm selftests instead when kernel features are not present" from
Zi Yan fixes some issues in the MM selftest code.
- "mm/damon: build-enable essential DAMON components by default" from
SeongJae Park reworks DAMON Kconfig to make it easier to enable
CONFIG_DAMON.
- "sched/numa: add statistics of numa balance task migration" from Libo
Chen adds more info into sysfs and procfs files to improve visibility
into the NUMA balancer's task migration activity.
- "selftests/mm: cow and gup_longterm cleanups" from Mark Brown
provides various updates to some of the MM selftests to make them
play better with the overall containing framework.
* tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (43 commits)
mm/khugepaged: clean up refcount check using folio_expected_ref_count()
selftests/mm: fix test result reporting in gup_longterm
selftests/mm: report unique test names for each cow test
selftests/mm: add helper for logging test start and results
selftests/mm: use standard ksft_finished() in cow and gup_longterm
selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled
sched/numa: add statistics of numa balance task
sched/numa: fix task swap by skipping kernel threads
tools/testing: check correct variable in open_procmap()
tools/testing/vma: add missing function stub
mm/gup: update comment explaining why gup_fast() disables IRQs
selftests/mm: two fixes for the pfnmap test
mm/khugepaged: fix race with folio split/free using temporary reference
mm: add CONFIG_PAGE_BLOCK_ORDER to select page block order
mmu_notifiers: remove leftover stub macros
selftests/mm: deduplicate test names in madv_populate
kcov: rust: add flags for KCOV with Rust
mm: rust: make CONFIG_MMU ifdefs more narrow
mmu_gather: move tlb flush for VM_PFNMAP/VM_MIXEDMAP vmas into free_pgtables()
mm/damon/Kconfig: enable CONFIG_DAMON by default
...
Pull gfs2 fix from Andreas Gruenbacher:
- Fix a NULL pointer dereference reported by syzbot
* tag 'gfs2-for-6.16-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Don't clear sb->s_fs_info in gfs2_sys_fs_add
Pull fuse updates from Miklos Szeredi:
- Remove tmp page copying in writeback path (Joanne).
This removes ~300 lines and with that a lot of complexity related to
avoiding reclaim related deadlock. The old mechanism is replaced with
a mapping flag that tells the MM not to block reclaim waiting for
writeback to complete. The MM parts have been reviewed/acked by
respective maintainers.
- Convert more code to handle large folios (Joanne). This still just
adds the code to deal with large folios and does not enable them yet.
- Allow invalidating all cached lookups atomically (Luis Henriques).
This feature is useful for CernVMFS, which currently does this
iteratively.
- Align write prefaulting in fuse with generic one (Dave Hansen)
- Fix race causing invalid data to be cached when setting attributes on
different nodes of a distributed fs (Guang Yuan Wu)
- Update documentation for passthrough (Chen Linxuan)
- Add fdinfo about the device number associated with an opened
/dev/fuse instance (Chen Linxuan)
- Increase readdir buffer size (Miklos). This depends on a patch to VFS
readdir code that was already merged through Christians tree.
- Optimize io-uring request expiration (Joanne)
- Misc cleanups
* tag 'fuse-update-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (25 commits)
fuse: increase readdir buffer size
readdir: supply dir_context.count as readdir buffer size hint
fuse: don't allow signals to interrupt getdents copying
fuse: support large folios for writeback
fuse: support large folios for readahead
fuse: support large folios for queued writes
fuse: support large folios for stores
fuse: support large folios for symlinks
fuse: support large folios for folio reads
fuse: support large folios for writethrough writes
fuse: refactor fuse_fill_write_pages()
fuse: support large folios for retrieves
fuse: support copying large folios
fs: fuse: add dev id to /dev/fuse fdinfo
docs: filesystems: add fuse-passthrough.rst
MAINTAINERS: update filter of FUSE documentation
fuse: fix race between concurrent setattrs from multiple nodes
fuse: remove tmp folio for writebacks and internal rb tree
mm: skip folio reclaim in legacy memcg contexts for deadlockable mappings
fuse: optimize over-io-uring request expiration check
...
The lock ordering rules listed as comments in cifsglob.h were
missing some lock details and also the fid_lock.
Updated those notes in this commit.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull netfs updates from Christian Brauner:
- The main API document has been extensively updated/rewritten
- Fix an oops in write-retry due to mis-resetting the I/O iterator
- Fix the recording of transferred bytes for short DIO reads
- Fix a request's work item to not require a reference, thereby
avoiding the need to get rid of it in BH/IRQ context
- Fix waiting and waking to be consistent about the waitqueue used
- Remove NETFS_SREQ_SEEK_DATA_READ, NETFS_INVALID_WRITE,
NETFS_ICTX_WRITETHROUGH, NETFS_READ_HOLE_CLEAR,
NETFS_RREQ_DONT_UNLOCK_FOLIOS, and NETFS_RREQ_BLOCKED
- Reorder structs to eliminate holes
- Remove netfs_io_request::ractl
- Only provide proc_link field if CONFIG_PROC_FS=y
- Remove folio_queue::marks3
- Fix undifferentiation of DIO reads from unbuffered reads
* tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix undifferentiation of DIO reads from unbuffered reads
netfs: Fix wait/wake to be consistent about the waitqueue used
netfs: Fix the request's work item to not require a ref
netfs: Fix setting of transferred bytes with short DIO reads
netfs: Fix oops in write-retry from mis-resetting the subreq iterator
fs/netfs: remove unused flag NETFS_RREQ_BLOCKED
fs/netfs: remove unused flag NETFS_RREQ_DONT_UNLOCK_FOLIOS
folio_queue: remove unused field `marks3`
fs/netfs: declare field `proc_link` only if CONFIG_PROC_FS=y
fs/netfs: remove `netfs_io_request.ractl`
fs/netfs: reorder struct fields to eliminate holes
fs/netfs: remove unused enum choice NETFS_READ_HOLE_CLEAR
fs/netfs: remove unused flag NETFS_ICTX_WRITETHROUGH
fs/netfs: remove unused source NETFS_INVALID_WRITE
fs/netfs: remove unused flag NETFS_SREQ_SEEK_DATA_READ
The j721e driver has a single platform driver that can be built-in or a
loadable module, but it calls two separate backend drivers depending on
whether it is a host or endpoint.
If the two modes are not the same, we can end up with a situation where the
built-in pci-j721e driver tries to call the modular host or endpoint
driver, which causes a link failure:
ld.lld-21: error: undefined symbol: cdns_pcie_ep_setup
>>> referenced by pci-j721e.c
>>> drivers/pci/controller/cadence/pci-j721e.o:(j721e_pcie_probe) in archive vmlinux.a
ld.lld-21: error: undefined symbol: cdns_pcie_host_setup
>>> referenced by pci-j721e.c
>>> drivers/pci/controller/cadence/pci-j721e.o:(j721e_pcie_probe) in archive vmlinux.a
Rework the dependencies so that the 'select' is done by the common Kconfig
symbol, based on which of the two are enabled. Effectively this means that
having one built-in makes the other either built-in or disabled, but all
configurations will now build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250423162523.2060405-1-arnd@kernel.org
Pull vfs fixes from Christian Brauner:
- Fix the AT_HANDLE_CONNECTABLE option so filesystems that don't know
how to decode a connected non-dir dentry fail the request
- Use repr(transparent) to ensure identical layout between the C and
Rust implementation of struct file
- Add a missing xas_pause() into the dax code employing
wait_entry_unlocked_exclusive()
- Fix FOP_DONTCACHE which we disabled for v6.15.
A folio could get redirtied and/or scheduled for writeback after the
initial dropbehind test. Change the test accordingly to handle these
cases so we can re-enable FOP_DONTCACHE again
* tag 'vfs-6.16-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
exportfs: require ->fh_to_parent() to encode connectable file handles
rust: file: improve safety comments
rust: file: mark `LocalFile` as `repr(transparent)`
fs/dax: Fix "don't skip locked entries when scanning entries"
iomap: don't lose folio dropbehind state for overwrites
mm/filemap: unify dropbehind flag testing and clearing
mm/filemap: unify read/write dropbehind naming
Revert "Disable FOP_DONTCACHE for now due to bugs"
mm/filemap: use filemap_end_dropbehind() for read invalidation
mm/filemap: gate dropbehind invalidate on folio !dirty && !writeback
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
Pull m68knommu updates from Greg Ungerer:
- use new gpio line value settings
- use strscpy() more
* tag 'm68knommu-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: Replace memcpy() + manual NUL-termination with strscpy()
m68k/kernel: replace strncpy() with strscpy()
m68k: coldfire: gpio: use new line value setter callbacks
When calling cifs_reconnect, before the connection to the
server is reestablished, the code today does a DNS resolution and
updates server->dstaddr.
However, this is not necessary for secondary channels. Secondary
channels use the interface list returned by the server to decide
which address to connect to. And that happens after tcon is reconnected
and server interfaces are requested.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
When the server interface info changes (more common in clustered
servers like Azure Files), the per-channel iface gets updated.
However, this did not update the corresponding dstaddr. As a result
these channels will still connect (or try connecting) to older addresses.
Fixes: b54034a73b ("cifs: during reconnect, update interface if necessary")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_reconnect can be called with a flag to mark the session as needing
reconnect too. When this is done, we expect the connections of all
channels to be reconnected too, which is not happening today.
Without doing this, we have seen bad things happen when primary and
secondary channels are connected to different servers (in case of cloud
services like Azure Files SMB).
This change would force all connections to reconnect as well, not just
the sessions and tcons.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull input updates from Dmitry Torokhov:
- support for game controllers requiring delayed initialization
packets, such as ByoWave Proteus, in xpad driver
- a change to atkbd driver to not reset the keyboard on Loongson
devices
- tweaks to gpio-keys and matrix_keypad drivers
- fixes to documentation for Amiga joysticks
- a fix to ims-pcu driver to better handle malformed firmware
* tag 'input-for-v6.16-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ims-pcu - check record size in ims_pcu_flash_firmware()
Input: gpio-keys - fix possible concurrent access in gpio_keys_irq_timer()
Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT
Input: amijoy - make headings compliant w/ guidelines in documentation
Input: amijoy - fix grammar in documentation
Input: amijoy - fix Amiga 4-joystick adapter pinout in documentation
Input: amijoy - fix broken table formatting in documentation
Input: atkbd - do not reset keyboard by default on Loongson
Input: xpad - send LED and auth done packets to all Xbox One controllers
Input: xpad - add the ByoWave Proteus controller
Input: xpad - allow delaying init packets
MAINTAINERS: update dlg,da72??.txt to yaml
dt-bindings: input: convert dlg,da7280.txt to dt-schema
dt-bindings: input: touchscreen: edt-ft5x06: use unevaluatedProperties
Input: snvs_pwrkey - support power-off-time-sec
dt-bindings: crypto: fsl,sec-v4.0-mon: Add "power-off-time-sec"
Input: matrix_keypad - detect change during scan
Input: matrix_keypad - add function for reading row state
Pull MTD updates from Miquel Raynal:
"A big core MTD change is the introduction of a new class to always
register a master device. This is a problem that has been there
forever: the "master" device was not always present depending on a
number of heuristics such as the presence of fixed partitions and the
absence of a Kconfig symbol to force its presence. This was a problem
for runtime PM operations which might not have the "master" device
available in all situation.
The SPI NAND subsystem has seen the introduction of DTR operations
(the equivalent of DDR transfers), which involved quite a few
preparation patches for clarifying macro names.
In the raw NAND subsystem, the brcmnand driver has been "fixed" for
old legacy SoCs with an update of the ->exec_op() hook, there has been
the introduction of a new controller driver named Loongson-1, and the
Qualcomm driver has received quite a few misc fixes as well as a new
compatible.
Finally, Macornix SPI NOR entries have been cleaned-up and some SFDP
table fixups for Macronix MX25L3255E have been merged.
Aside from this, there is the usual load of misc improvement, fixes,
and yaml conversion"
* tag 'mtd/for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (42 commits)
mtd: rawnand: brcmnand: legacy exec_op implementation
mtd: rawnand: sunxi: Add randomizer configuration in sunxi_nfc_hw_ecc_write_chunk
mtd: nand: brcmnand: fix NAND timeout when accessing eMMC
mtd: nand: sunxi: Add randomizer configuration before randomizer enable
mtd: spinand: esmt: fix id code for F50D1G41LB
mtd: rawnand: brcmnand: remove unused parameters
mtd: core: always create master device
mtd: rawnand: loongson1: Fix inconsistent refcounting in ls1x_nand_chip_init()
mtd: rawnand: loongson1: Fix error code in ls1x_nand_dma_transfer()
mtd: rawnand: qcom: Fix read len for onfi param page
mtd: rawnand: qcom: Fix last codeword read in qcom_param_page_type_exec()
mtd: rawnand: qcom: Pass 18 bit offset from NANDc base to BAM base
dt-bindings: mtd: qcom,nandc: Document the SDX75 NAND controller
mtd: bcm47xxnflash: Add error handling for bcm47xxnflash_ops_bcm4706_ctl_cmd()
mtd: rawnand: Use non-hybrid PCI devres API
mtd: nand: ecc-mxic: Fix use of uninitialized variable ret
mtd: spinand: winbond: Add support for W35N02JW and W35N04JW chips
mtd: spinand: winbond: Add octal support
mtd: spinand: winbond: Add support for W35N01JW in single mode
mtd: spinand: winbond: Rename DTR variants
...
Pull rpmsg updates from Bjorn Andersson:
- Remove some dead and unused code from core and virtio modules
- Improve the error messages from the Qualcomm SMD driver and
initialize an uninitialized variable in the send path
* tag 'rpmsg-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: qcom_smd: Fix uninitialized return variable in __qcom_smd_send()
rpmsg: qcom_smd: Improve error handling for qcom_smd_parse_edge
rpmsg: Remove unused method pointers *send_offchannel
rpmsg: virtio: Remove uncallable offchannel functions
rpmsg: core: Remove deadcode
Pull remoteproc updates from Bjorn Andersson:
- Fix resource cleanup in the remoteproc attach error handling code
paths
- Refactor the various TI K3 drivers to extract and reuse common code
between them
- Add support in the i.MX remoteproc driver for determining from the
firmware if Linux should wait on a "firmware ready" signal at startup
- Improve the Xilinx R5F power down mechanism to handle use cases where
this is shared with other entities in the system
* tag 'rproc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (46 commits)
remoteproc: k3: Refactor release_tsp() functions into common driver
remoteproc: k3: Refactor reserved_mem_init() functions into common driver
remoteproc: k3: Refactor mem_release() functions into common driver
remoteproc: k3: Refactor of_get_memories() functions into common driver
remoteproc: k3: Refactor .da_to_va rproc ops into common driver
remoteproc: k3: Refactor .get_loaded_rsc_table ops into common driver
remoteproc: k3: Refactor .detach rproc ops into common driver
remoteproc: k3: Refactor .attach rproc ops into common driver
remoteproc: k3: Refactor .stop rproc ops into common driver
remoteproc: k3: Refactor .start rproc ops into common driver
remoteproc: k3: Refactor .unprepare rproc ops into common driver
remoteproc: k3: Refactor .prepare rproc ops into common driver
remoteproc: k3-dsp: Assert local reset during .prepare callback
remoteproc: k3-dsp: Don't override rproc ops in IPC-only mode
remoteproc: k3: Refactor rproc_request_mbox() implementations into common driver
remoteproc: k3-m4: Ping the mbox while acquiring the channel
remoteproc: k3: Refactor rproc_release() implementation into common driver
remoteproc: k3-m4: Introduce central function to release rproc from reset
remoteproc: k3-dsp: Correct Reset deassert logic for devices w/o lresets
remoteproc: k3: Refactor rproc_reset() implementation into common driver
...
Add the userspace interface to load the driver with fewer engines.
The syntax is to just echo the engine names to a file in configfs, like
below:
echo 'rcs0,bcs0' > /sys/kernel/config/xe/<bdf>/engine_allowed
With that engines other than rcs0 and bcs0 will not be enabled. To
enable all instances from a class, a '*' can be used.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250528-engine-mask-v4-4-f4636d2a890a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Sometimes it's useful to load the driver with a smaller set of engines
to allow more targeted debugging, particularly on early enabling.
Besides checking what is fused off in hardware, add similar logic to
disable engines in software. This will use configfs to allow users
to set what engine to disable, so already add prepare for that. The
exact configfs interface will be added later.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250528-engine-mask-v4-3-f4636d2a890a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
We have stress_03, stress_04 and stress_05 for checking new feature vs.
stress IO & device removal & ublk server crash & recovery, so let the
three existing stress tests cover PER_IO_DAEMON.
Then stress_06 can be removed, since the same test function is included in
stress_03.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250602132113.1398645-1-ming.lei@redhat.com
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
[axboe: remove test_stress_06.sh from Makefile too]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There could be a scenario where the VF driver is resuming faster
than the driver PF is able to complete the VF FLR sequence which
includes reset of the VF scratch registers. This may result in
deletion of the ongoing HXG message (it could be either a host
request or a GuC response).
When we detect that HXG message was likey lost (scratch register
with HXG header was zeroed) try to send this request once more
before giving up.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250528090021.329-1-michal.wajdeczko@intel.com
