Pull PCI fixes from Bjorn Helgaas:
- When releasing a start-aligned resource, e.g., a bridge window, save
start/end/flags for the next assignment attempt; fixes a v6.15-rc1
regression (Ilpo Järvinen)
- Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl
selftest v6.15-rc1 regression (Ilpo Järvinen)
- Add Manivannan Sadhasivam as maintainer of native host bridge and
endpoint drivers (Manivannan Sadhasivam)
- In endpoint test driver, defer IRQ allocation from .probe() until
ioctl() to fix a regression on platforms where the Vendor/Device ID
match doesn't include driver_data (Niklas Cassel)
* tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer
selftests/pcie_bwctrl: Fix test progs list
PCI: Restore assigned resources fully after release
Pull kunit fix from Kees Cook:
"A single fix for the kunit lib/tests/ relocation:
- Ensure prime numbers tests are included in KUnit test runs (Mark Brown)"
* tag 'move-lib-kunit-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib: Ensure prime numbers tests are included in KUnit test runs
Recent discussions around commit ad1afb0039 ("vlan_dev: VLAN 0 should
be treated as "no vlan tag" (802.1p packet)") have sparked the question
what happens with the DSA (and possibly other switchdev) data path when
the bridge says that ports should have no PVID VLAN, but the 8021q
module, as the result of a NETDEV_UP event, decides it should add VID 0
to the RX filter of those bridge ports. Do those bridge ports receive
packets tagged with VID 0 or not, now? We don't know, there is no test.
In the veth realm, this passes trivially, because veth is not VLAN
filtering and this, the 8021q module lacks the instinct to add VID 0 in
the first place.
In the realm of VLAN filtering NICs with no switchdev offload, this
should also pass, because the VLAN groups of the software bridge are
consulted, where it can clearly be seen that a PVID is missing, even
though the packet was initially accepted by the NIC.
The test only poses a challenge for switchdev drivers, which usually
have to program to hardware both VLANs from RX filtering, as well as
from switchdev. Especially when a switchdev port joins a VLAN-aware
bridge, it is unavoidable that it gains the NETIF_F_HW_VLAN_CTAG_FILTER
feature, i.e. any 8021q uppers that the bridge port may have must also
be committed to the RX filtering table of the interface. When a
VLAN-tagged packet is physically received by the port, it is initially
indistinguishable whether it will reach the bridge data path or the
8021q upper data path.
That is rather the final step of the new tests that we introduce.
We need to build context up to that stage, which means the following:
- we need to test that 802.1p (VID 0) tagged traffic is received in the
first place (on bridge ports with a valid PVID). This is the "8021p"
test.
- we need to test that the usual paths of reaching a configuration with
no PVID on a bridge port are all covered and they all reach the same
state.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424223734.3096202-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RSS contexts are used to shard work across multiple queues for an
application using io_uring zero copy receive. Add a test case checking
that steering flows into an RSS context works.
Until I add multi-thread support to the selftest binary, this test case
only has 1 queue in the RSS context.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250425022049.3474590-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Add namespace to BPF internal symbols (Alexei Starovoitov)
- Fix possible endless loop in BPF map iteration (Brandon Kammerdiener)
- Fix compilation failure for samples/bpf on LoongArch (Haoran Jiang)
- Disable a part of sockmap_ktls test (Ihor Solodrai)
- Correct typo in __clang_major__ macro (Peilin Ye)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Correct typo in __clang_major__ macro
samples/bpf: Fix compilation failure for samples/bpf on LoongArch Fedora
bpf: Add namespace to BPF internal symbols
selftests/bpf: add test for softlock when modifying hashmap while iterating
bpf: fix possible endless loop in BPF map iteration
selftests/bpf: Mitigate sockmap_ktls disconnect_after_delete failure
Pull cxl fixes from Dave Jiang:
"The fixes address global persistent flush (GPF) changes and CXL
Features support changes that went in the 6.15 merge window. And also
a fix to an issue observed on CXL 1.1 platform during device
enumeration.
Summary:
- Fix using the wrong GPF DVSEC location:
- Fix caching of dport GPF DVSEC from the first endpoint
- Ensure that the GPF phase timeout is only updated once by first
endpoint
- Drop is_port parameter for cxl_gpf_get_dvsec()
- Fix the devm_* call host device for CXL fwctl setup
- Set the out_len in Set Features failure case
- Fix RCD initialization by skipping unneeded mem_en check"
* tag 'cxl-fixes-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/regs.c: Skip Memory Space Enable check for RCD and RCH Ports
cxl/feature: Update out_len in set feature failure case
cxl: Fix devm host device for CXL fwctl initialization
cxl/pci: Drop the parameter is_port of cxl_gpf_get_dvsec()
cxl/pci: Update Port GPF timeout only when the first EP attaching
cxl/core: Fix caching dport GPF DVSEC issue
Pull block fixes from Jens Axboe:
- Fix autoloading of drivers from stat*(2)
- Fix losing read-ahead setting one suspend/resume, when a device is
re-probed.
- Fix race between setting the block size and page cache updates.
Includes a helper that a coming XFS fix will use as well.
- ublk cancelation fixes.
- ublk selftest additions and fixes.
- NVMe pull via Christoph:
- fix an out-of-bounds access in nvmet_enable_port (Richard
Weinberger)
* tag 'block-6.15-20250424' of git://git.kernel.dk/linux:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA
block: don't autoload drivers on blk-cgroup configuration
block: don't autoload drivers on stat
block: remove the backing_inode variable in bdev_statx
block: move blkdev_{get,put} _no_open prototypes out of blkdev.h
block: never reduce ra_pages in blk_apply_bdi_limits
selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils
selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'
selftests: ublk: fix recover test
block: hoist block size validation code to a separate function
block: fix race between set_blocksize and read paths
nvmet: fix out-of-bounds access in nvmet_enable_port
Merge 6.15 block fixes - both to get the fixes causing issues with
XFS testing, but also to make it easier for 6.16 ublk patches to avoid
conflicts.
* block-6.15:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA
block: don't autoload drivers on blk-cgroup configuration
block: don't autoload drivers on stat
block: remove the backing_inode variable in bdev_statx
block: move blkdev_{get,put} _no_open prototypes out of blkdev.h
block: never reduce ra_pages in blk_apply_bdi_limits
selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils
selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'
selftests: ublk: fix recover test
block: hoist block size validation code to a separate function
block: fix race between set_blocksize and read paths
nvmet: fix out-of-bounds access in nvmet_enable_port
Copy the big-endian field declarations from qspinlock_types.h,
otherwise some properties won't hold on big-endian systems. For
example, assigning lock->val = 1 should result in lock->locked == 1,
which is not the case there.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424165525.154403-4-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_arena_spin_lock_size() explicitly requires having at least 2 CPUs,
but if the machine has less than 16, then pthread_setaffinity_np() call
in spin_lock_thread() fails.
Cap threads to the number of CPUs.
Alternative solutions are raising the number of required CPUs to 16, or
pinning multiple threads to the same CPU, but they are not that useful.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424165525.154403-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changing bpf_arena_spin_lock.h does not lead to recompiling
arena_spin_lock.c. By convention, all BPF progs depend on all
header files in progs/, so move this header file there. There
are no other users besides arena_spin_lock.c.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424165525.154403-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull landlock fixes from Mickaël Salaün:
"Fix some Landlock audit issues, add related tests, and updates
documentation"
* tag 'landlock-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Update log documentation
landlock: Fix documentation for landlock_restrict_self(2)
landlock: Fix documentation for landlock_create_ruleset(2)
selftests/landlock: Add PID tests for audit records
selftests/landlock: Factor out audit fixture in audit_test
landlock: Log the TGID of the domain creator
landlock: Remove incorrect warning
Cross-merge networking fixes after downstream PR (net-6.15-rc4).
This pull includes wireless and a fix to vxlan which isn't
in Linus's tree just yet. The latter creates with a silent conflict
/ build breakage, so merging it now to avoid causing problems.
drivers/net/vxlan/vxlan_vnifilter.c
094adad913 ("vxlan: Use a single lock to protect the FDB table")
087a9eb9e5 ("vxlan: vnifilter: Fix unlocked deletion of default FDB entry")
https://lore.kernel.org/20250423145131.513029-1-idosch@nvidia.com
No "normal" conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"No fixes from any subtree.
Current release - regressions:
- net: fix the missing unlock for detached devices
Previous releases - regressions:
- sched: fix UAF vulnerability in HFSC qdisc
- lwtunnel: disable BHs when required
- mptcp: pm: defer freeing of MPTCP userspace path manager entries
- tipc: fix NULL pointer dereference in tipc_mon_reinit_self()
- eth: virtio-net: disable delayed refill when pausing rx
Previous releases - always broken:
- phylink: fix suspend/resume with WoL enabled and link down
- eth:
- mlx5: fix null-ptr-deref in mlx5_create_{inner_,}ttc_table()
- xen-netfront: handle NULL returned by xdp_convert_buff_to_frame()
- enetc: fix frame corruption on bpf_xdp_adjust_head/tail() and XDP_PASS
- stmmac: fix dwmac1000 ptp timestamp status offset
- pds_core: prevent possible adminq overflow/stuck condition
Misc:
- a bunch of MAINTAINERS updates"
* tag 'net-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits)
net: stmmac: fix multiplication overflow when reading timestamp
net: stmmac: fix dwmac1000 ptp timestamp status offset
net: dp83822: Fix OF_MDIO config check
pds_core: make wait_context part of q_info
pds_core: Remove unnecessary check in pds_client_adminq_cmd()
pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result
pds_core: Prevent possible adminq overflow/stuck condition
net: dsa: mt7530: sync driver-specific behavior of MT7531 variants
selftests/tc-testing: Add test for HFSC queue emptying during peek operation
net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too
net_sched: hfsc: Fix a UAF vulnerability in class handling
selftests: mptcp: diag: use mptcp_lib_get_info_value
mptcp: pm: Defer freeing of MPTCP userspace path manager entries
net: ethernet: mtk_eth_soc: net: revise NETSYSv3 hardware configuration
tipc: fix NULL pointer dereference in tipc_mon_reinit_self()
virtio-net: disable delayed refill when pausing rx
net: phy: leds: fix memory leak
net: phylink: mac_link_(up|down)() clarifications
net: phylink: fix suspend/resume with WoL enabled and link down
net: lwtunnel: disable BHs when required
...
tc_redirect/tc_redirect_dtime fails intermittently on some systems
with:
(network_helpers.c:303: errno: Operation now in progress) Failed to connect to server
The problem is that on these systems systemd-networkd and systemd-udevd
are installed in the default configuration, which includes:
/usr/lib/systemd/network/99-default.link
/usr/lib/udev/rules.d/80-net-setup-link.rules
These configs instruct systemd to change MAC addresses of newly created
interfaces, which includes the ones created by BPF selftests. In this
particular case it causes SYN+ACK packets to be dropped, because they
get the PACKET_OTHERHOST type - the fact that this causes a connect()
on a blocking socket to return -EINPROGRESS looks like a bug, which
needs to be investigated separately.
systemd won't change the MAC address if the kernel reports that it was
already set by userspace; the NET_ADDR_SET check in
link_generate_new_hw_addr() is responsible for this.
In order to eliminate the race window between systemd and the test,
set MAC addresses during link creation. Ignore checkpatch's "quoted
string split across lines" warning, since it points to a command line,
and not a user-visible message.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250416124845.584362-1-iii@linux.ibm.com
When running diag.sh in a loop, chk_dump_one will report the following
"grep: write error":
13 ....chk 2 cestab [ OK ]
grep: write error
14 ....chk dump_one [ OK ]
15 ....chk 2->0 msk in use after flush [ OK ]
16 ....chk 2->0 cestab after flush [ OK ]
This error is caused by a broken pipe. When the output of 'ss' is processed
by grep, 'head -n 1' will exit immediately after getting the first line,
causing the subsequent pipe to close. At this time, if 'grep' is still
trying to write data to the closed pipe, it will trigger a SIGPIPE signal,
causing a write error.
One solution is not to use this problematic "head -n 1" command, but to use
mptcp_lib_get_info_value() helper defined in mptcp_lib.sh to get the value
of 'token'.
Fixes: ba24001665 ("selftests: mptcp: add a test for mptcp_diag_dump_one")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Gang Yan <yangang@kylinos.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250421-net-mptcp-pm-defer-freeing-v1-2-e731dc6e86b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change ALL_TESTS definition to "test-per-line".
Add the test case of per vlan snooping with port stp state change to
forwarding and also vlan equivalent case in both bridge_igmp.sh and
bridge_mld.sh.
Signed-off-by: Yong Wang <yongwang@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Static analysis found an issue in bench_htab_mem.c and sk_assign.c
cppcheck output before this patch:
tools/testing/selftests/bpf/benchs/bench_htab_mem.c:284:3: error: Resource leak: fd [resourceLeak]
tools/testing/selftests/bpf/prog_tests/sk_assign.c:41:3: error: Resource leak: tc [resourceLeak]
cppcheck output after this patch:
No resource leaks found
Fix the issue by closing the file descriptors fd and tc.
Signed-off-by: Malaya Kumar Rout <malayarout91@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250421174405.26080-1-malayarout91@gmail.com
When the select of PRIME_MUMBERS was removed from it's KUnit test
Kconfig nothing was added to the KUnit configs, meaning that when run
via the KUnit runner the tests are neither built nor run. Add
PRIME_NUMBERS to all_tests.config so they are enabled when the KUnit
runner builds the kernel.
Fixes: 3f2925174f ("lib/prime_numbers: KUnit test should not select PRIME_NUMBERS")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250422-lib-fix-prime-numbers-kunit-v1-1-4278c1d4a4ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
printf can pad each argument to a certain width.
Implement this for compatibility with the kselftest harness.
Currently only padding with spaces is supported.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Now that we have a proper snprintf() implementation,
make sure truncation is handled properly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
With the addition of snprintf() and its usage in nolibc-test, the name of
the "vfprintf" test suite is not accurate anymore.
Rename the suite to be more generic.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
With a proper snprintf() implementation in place, the ugly pipe usage is
not necessary anymore.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
nolibc's waitpid() now uses the waitid() syscall internally.
This removes the original reasoning for the reverted commit as
waitpid() is now available on all platforms and has an easier interface.
Switch back to waitpid().
This reverts commit a0bc8947ac.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
In nolibc intmax_t and uintmax_t are always the same as
(unsigned) long long/uint64_t as 128bit numbers are not supported.
Even libcs that do support 128bit numbers often fix intmax_t to 64bit
as it is used in ABIs and any change would break those.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-04-17
We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 18 files changed, 1748 insertions(+), 19 deletions(-).
The main changes are:
1) bpf qdisc support, from Amery Hung.
A qdisc can be implemented in bpf struct_ops programs and
can be used the same as other existing qdiscs in the
"tc qdisc" command.
2) Add xsk tail adjustment tests, from Tushar Vyavahare.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Test attaching bpf qdisc to mq and non root
selftests/bpf: Add a bpf fq qdisc to selftest
selftests/bpf: Add a basic fifo qdisc test
libbpf: Support creating and destroying qdisc
bpf: net_sched: Disable attaching bpf qdisc to non root
bpf: net_sched: Support updating bstats
bpf: net_sched: Add a qdisc watchdog timer
bpf: net_sched: Add basic bpf qdisc kfuncs
bpf: net_sched: Support implementation of Qdisc_ops in bpf
bpf: Prepare to reuse get_ctx_arg_idx
selftests/xsk: Add tail adjustment tests and support check
selftests/xsk: Add packet stream replacement function
====================
Link: https://patch.msgid.link/20250417184338.3152168-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull tracing fixes from Steven Rostedt:
- Initialize hash variables in ftrace subops logic
The fix that simplified the ftrace subops logic opened a path where
some variables could be used without being initialized, and done
subtly where the compiler did not catch it. Initialize those
variables to the EMPTY_HASH, which is the default hash.
- Reinitialize the hash pointers after they are freed
Some of the hash pointers in the subop logic were freed but may still
be referenced later. To prevent use-after-free bugs, initialize them
back to the EMPTY_HASH.
- Free the ftrace hashes when they are replaced
The fix that simplified the subops logic updated some hash pointers,
but left the original hash that they were pointing to where they are
no longer used. This caused a memory leak. Free the hashes that are
pointed to by the pointers when they are replaced.
- Fix size initialization of ftrace direct function hash
The ftrace direct function hash used by BPF initialized the hash size
incorrectly. It checked the size of items to a hard coded 32, which
made the hash bit size of 5. The hash size is supposed to be limited
by the bit size of the hash, as the bitmask is allowed to be greater
than 5. Rework the size check to first pass the number of elements to
fls() and then compare that to FTRACE_HASH_MAX_BITS before allocating
the hash.
- Fix format output of ftrace_graph_ent_entry event
The field depth of the ftrace_graph_ent_entry event is of size 4 but
the output showed it as unsigned long and use "%lu". Change it to
unsigned int and use "%u" in the print format that is displayed to
user space.
- Fix the trace event filter on strings
Events can be filtered on numbers or string values. The return value
checked from strncpy_from_kernel_nofault() and
strncpy_from_user_nofault() was used to determine if reading the
strings would fault or not. It would return fault if the value was
non zero, which is basically meant that it was always considering the
read as a fault.
- Add selftest to test trace event string filtering
In order to catch the breakage of the string filtering, add a self
test to make sure that it continues to work.
* tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: selftests: Add testing a user string to filters
tracing: Fix filter string testing
ftrace: Fix type of ftrace_graph_ent_entry.depth
ftrace: fix incorrect hash size in register_ftrace_direct()
ftrace: Free ftrace hashes after they are replaced in the subops code
ftrace: Reinitialize hash to EMPTY_HASH after freeing
ftrace: Initialize variables for ftrace_startup/shutdown_subops()
Pull hardening fixes from Kees Cook:
- lib/prime_numbers: KUnit test should not select PRIME_NUMBERS (Geert
Uytterhoeven)
- ubsan: Fix panic from test_ubsan_out_of_bounds (Mostafa Saleh)
- ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP (Nathan
Chancellor)
- string: Add load_unaligned_zeropad() code path to sized_strscpy()
(Peter Collingbourne)
- kasan: Add strscpy() test to trigger tag fault on arm64 (Vincenzo
Frascino)
- Disable GCC randstruct for COMPILE_TEST
* tag 'hardening-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/prime_numbers: KUnit test should not select PRIME_NUMBERS
ubsan: Fix panic from test_ubsan_out_of_bounds
lib/Kconfig.ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP
hardening: Disable GCC randstruct for COMPILE_TEST
kasan: Add strscpy() test to trigger tag fault on arm64
string: Add load_unaligned_zeropad() code path to sized_strscpy()
