Pull more ARM SoC updates from Olof Johansson:
"A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a
build fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
Vivante GPU, 256MB RAM, Wifi). This includes some acked
platform-specific drivers (serial, etc). This also include DTs for
two boards with this SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
arm64: defconfig: Re-enable bcm2835-thermal driver
MAINTAINERS: Add entry for RDA Micro SoC architecture
tty: serial: Add RDA8810PL UART driver
ARM: dts: rda8810pl: Add interrupt support for UART
dt-bindings: serial: Document RDA Micro UART
ARM: dts: rda8810pl: Add timer support
ARM: dts: Add devicetree for OrangePi i96 board
ARM: dts: Add devicetree for OrangePi 2G IoT board
ARM: dts: Add devicetree for RDA8810PL SoC
ARM: Prepare RDA8810PL SoC
dt-bindings: arm: Document RDA8810PL and reference boards
dt-bindings: Add RDA Micro vendor prefix
ARM: sti: remove pen_release and boot_lock
arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
arm64: dts: imx8mq-evk: enable watchdog
arm64: dts: imx8mq: add watchdog devices
MAINTAINERS: add i.MX8 DT path to i.MX architecture
arm64: add support for i.MX8M EVK board
arm64: add basic DTS for i.MX8MQ
...
Enable the UniPhier MIO DMAC driver. This is used as the DMA engine
for accelerating the SD/eMMC controller drivers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull ARM SoC defconfig updates from Olof Johansson:
"Most changes here are to enable new drivers and platforms in the
various configs that affect them. Most of these have been covered and
described in the other branches, we mostly keep defconfig separate to
avoid conflicts between SoC/dt/driver updates that they otherwise
would be grouped with.
One thing worth mentioning here is that OMAP changes from using their
own UART driver, to 8250, for the multi_v7_defconfig shared config on
32-bit. This means that the console is now named ttyS* instead of
ttyO*. This change was already done for omap2_defconfig a while back,
so most users of these configs have either already updated, or can
easily follow the same patterns as they did at that time. This makes
platform support slightly easier for distros, since they no longer
need to keep track of a separate console prefix for these platforms"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO"
arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO
arm64: defconfig: Replace PINCTRL_MT7622 with PINCTRL_MTK_MOORE
arm64: defconfig: Regenerate for v4.20
ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver
ARM: multi_v7_defconfig: Add MAX8952 regulator driver
ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver
ARM: exynos_defconfig: Add MAX8952 regulator driver
ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers
ARM: imx_v6_v7_defconfig: add imx7ulp support
ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers
arm64: defconfig: Enable GCC and PINCTRL for MSM8998
arm64: defconfig: Enable core Qualcomm SDM845 options
ARM: defconfig: Enable the PL111 DRM driver on vexpress
ARM: defconfig: Update the vexpress defconfig
arm64: defconfig: Enable some qcom remoteproc configs
arm64: defconfig: Enable QCS404 configs
ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES
ARM: imx_v6_v7_defconfig: Enable BT_BNEP
...
Use the new options for default audio support and enable Nokia n900 audio
as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX defconfig update for 4.21:
- Enable build of i.MX7ULP SoC support.
- Enable Goodix touchscreen driver which is needed by ConnectCore 6UL
SBC Pro (ccimx6ulsbcpro) board support.
- Enable USB_ANNOUNCE_NEW_DEVICES to help USB issue debugging and
BT_BNEP to support network over bluetooth.
- Remove explicit ARM_UNWIND disabling as it's selected by ARM EABI
support.
- Enable DA9063 PMIC for emtrion i.MX6 boards support.
- Enable driver support for Pixel Pipeline (PXP) and DCP crypto block
which are found on i.MX6 and i.MX7 SoCs.
* tag 'imx-defconfig-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: add imx7ulp support
ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES
ARM: imx_v6_v7_defconfig: Enable BT_BNEP
ARM: imx_v6_v7_defconfig: Remove explicit ARM_UNWIND disable
ARM: imx_v6_v7_defconfig: Enable DA9063 PMIC support
ARM: imx_v6_v7_defconfig: Select the PXP driver
ARM: imx_v6_v7_defconfig: Enable CRYPTO_DEV_MXS_DCP
Signed-off-by: Olof Johansson <olof@lixom.net>
Add DRM bridge driver for TOSHIBA TC358764 chip used in LCD panel
for Samsung Exynos5250-based Arndale board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add regulator driver for MAX8952 PMIC chip used on Samsung UniversalC210
board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add DRM bridge driver for TOSHIBA TC358764 chip used in LCD panel
for Samsung Exynos5250-based Arndale board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add regulator driver for MAX8952 PMIC chip used on Samsung UniversalC210
board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add RTC and charger drivers for MAX8998 chip used on Samsung UniversalC210
board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch
screen by default on Digi International's AUO/Goodix LCD accessory kit used
with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This enables drivers for STM32 timer, low power timer and analog hardware
that can be used on STM32MP1 SoC:
- Timer & LP Timer MFD core, PWM, trigger & encoder drivers
- IIO ADC/DAC/DFSDM
- vrefbuf regu driver (voltage reference buffer).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Defconfig changes for omaps for v4.21 merge window
We're finally changing omaps to use 8250_OMAP instead of SERIAL_OMAP
for multi_v7_defconfig. This will make things much easier for distros,
and the kernel already warns about the kernel console getting
redirected with CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP defaulting to y.
People using /etc/inittab still need to s/ttyO/ttyS/ if using the
out-of-box multi_v7_defconfig, and that did not seem to be an issue
when we moved omap2plus_defconfig to use 8250_OMAP earlier.
The other change is to enable CONFIG_SND_SOC_TLV320AIC23_I2C as a
loadable module that I forgot to send a pull request for earlier.
* tag 'omap-for-v4.21/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default
ARM: omap2plus_defconfig: Add tlv320aic23 as module
Signed-off-by: Olof Johansson <olof@lixom.net>
Versatile Express defconfig updates:
This activates the new PL11x DRM driver with the
Versatile Express family of reference designs.
* tag 'vexpress-defconfig-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: defconfig: Enable the PL111 DRM driver on vexpress
ARM: defconfig: Update the vexpress defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
This updates the Versatile defconfig to use the new P111 DRM
driver that is merged in the DRM subsystem.
We deactivate the old CLCD driver and activate the Pl111 DRM
driver and the SiI9022 HDMI bridge.
We activate DMA memory allocation using CMA so that the special
graphics memory for the on-board CLCD can be used.
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This is necessary to support network over bluetooth:
| Sep 11 15:36:33 imx6qdl-variscite-som bluetoothd[281]: kernel lacks bnep-protocol support
| Sep 11 15:36:33 imx6qdl-variscite-som bluetoothd[281]: System does not support network plugin
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
CONFIG_ARM_UNWIND is removed when running 'savedefconfig', but
selected by ARM EABI (AEBI) support. This is done in preparation to making
further changes to this defconfig cleaner.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
All recent emtrion modules based on i.mx6 make use of the DA9063.
Therefore enable it with the following defaults:
- CONFIG_MFD_DA9063=y
- CONFIG_REGULATOR_DA9063=y
- CONFIG_DA9063_WATCHDOG=m
MFD and REGULATOR are built-in to have it at Kernel boot-time.
The WATCHDOG is optional and could be loaded from userspace.
Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Pixel Pipeline (PXP) block is present on several i.MX SoCs
such as imx6dl, imx6sl, imx6ul, imx6sx, imx6ull and imx7d.
Select the PXP driver by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We've already moved omap2plus_defconfig over to use 8250-omap instead of
omap-serial driver. Let's update multi_v7_defconfig too.
By default we also enable SERIAL_8250_OMAP_TTYO_FIXUP that updates the
kernel serial console to point to 8250 driver and warns about it during
the boot.
Users with ttyO[0123] in their /etc/inittab should update inittab to
to use ttyS[0123] instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>
I should have let this soak for a while in linux-next, since we have at
least one board that hit a regression from it. Revert from 4.20-rc, and
we'll queue it for next merge window once regression is fixed.
This reverts commit 513eb98595.
Signed-off-by: Olof Johansson <olof@lixom.net>
This block is present in 6sl, 6sll and 6ull so it should be enabled in
the default imx kernel config.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Using CONFIG_PREEMPT as preemption model for ARMv7 systems
appear to be the most reasonable default.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX defconfig update for 4.20:
- A series from Fabio to synchronize i.MX defconfig files with
savedefconfig.
- Enable CONFIG_TMPFS_POSIX_ACL to fix ACL applying failures seen with
starting weston from sddm as unprivileged user.
- Enable MC13783/MC13892 ADC driver by default.
- Select CONFIG_ARM_CPUIDLE by default to support generic ARM cpuidle
driver which is useful for i.MX platforms like i.MX7S/D.
- Built in usbnet drivers to support NFS mount via USB Ethernet dongle
on SoCs which have no native Ethernet controller, such as i.MX6 SLL
and i.MX7 ULP.
* tag 'imx-defconfig-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select CONFIG_TMPFS_POSIX_ACL
ARM: imx_v4_v5_defconfig: Remove unneeded options
ARM: imx_v4_v5_defconfig: Re-sync defconfig
ARM: mxs_defconfig: Remove unneeded options
ARM: mxs_defconfig: Re-sync defconfig
ARM: imx_v6_v7_defconfig: Remove unneeded options
ARM: imx_v6_v7_defconfig: Re-sync defconfig
ARM: imx_v6_v7_defconfig: select CONFIG_ARM_CPUIDLE by default
ARM: imx_v6_v7_defconfig: Make usbnet drivers builtin for boot
ARM: imx_v6_v7_defconfig: add CONFIG_FW_LOADER_USER_HELPER
ARM: imx_v6_v7_defconfig: Select CONFIG_SENSORS_MC13783_ADC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andreas Müller reports:
"Fixes:
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[220]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[224]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[215]: Failed to apply ACL on /dev/v4l-subdev10: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[228]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[232]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[217]: Failed to apply ACL on /dev/v4l-subdev11: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[214]: Failed to apply ACL on /dev/dri/card1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[216]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[226]: Failed to apply ACL on /dev/v4l-subdev9: Operation not supported
and nasty follow-ups: Starting weston from sddm as unpriviledged user fails
with some hints on missing access rights."
Select the CONFIG_TMPFS_POSIX_ACL option to fix these issues.
Reported-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove the following unneeded config options:
- CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS have been removed
since commit a930d8bd94 ("usb: chipidea: Always build ULPI code")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Re-sync the defconfig by doing:
make savedefconfig
cp defconfig arch/arm/configs/imx_v4_v5_defconfig
and only keep the options that were moved around.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove the following unneeded config options:
- CONFIG_ARM_THUMB is selected by default
- CONFIG_I2C is selected by default.
- CONFIG_FRAMEBUFFER_CONSOLE is selected by default
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Re-sync the defconfig by doing:
make savedefconfig
cp defconfig arch/arm/configs/mxs_defconfig
and only keep the options that were moved around.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove the following unneeded config options:
- CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS have been removed
since commit a930d8bd94 ("usb: chipidea: Always build ULPI code")
- CONFIG_DEBUG_FS is selected by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Re-sync the defconfig by doing:
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
and only keep the options that were moved around.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some i.MX platforms like i.MX7S/D uses generic ARM cpuidle
driver and psci method to support cpuidle feature, select
CONFIG_ARM_CPUIDLE by default for such platforms.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Chips such as imx6sll and imx7ulp have no ethernet support so the common
development usecase of nfs boot is supported via usb ethernet dongles.
Add drivers for additional usbnet device directly into the kernel image
produced by the imx defconfig.
This list is based on the usbnet devices supported by uboot.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the USB3 and USB2 phys implemented in UniPhier SoCs.
These phys are necessary for dwc3 and ehci controllers driving
the USB ports on Pro4 and PXs2 SoCs.
Since the USB host drivers are already built-in, so only the phy
driver are missing to allow booting with USB devices.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM Based defconfig Updates for v4.20
* Enable MAILBOX
* tag 'qcom-defconfig-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom_defconfig: Enable MAILBOX
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
