Pull tracing fixes from Steven Rostedt:
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding
'.pc' files are not installed, it reports that the libraries are
missing and confuses the developer. Instead, report that the
pkg-config files are missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space
strings. If the parser fails due to incorrect processing, it doesn't
terminate the buffer with a nul byte. Add a "failed" flag to the
parser that gets set when parsing fails and is used to know if the
buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an
error path that can exit the function without unregistering it. Since
the function returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for
read, an iterator is created and sets its hash pointer to the
associated hash that represents filtering or notrace filtering to it.
The issue is that the hash it points to can change while the
iteration is happening. All the locking used to access the tracer's
hashes are released which means those hashes can change or even be
freed. Using the hash pointed to by the iterator can cause UAF bugs
or similar.
Have the read of these files allocate and copy the corresponding
hashes and use that as that will keep them the same while the
iterator is open. This also simplifies the code as opening it for
write already does an allocate and copy, and now that the read is
doing the same, there's no need to check which way it was opened on
the release of the file, and the iterator hash can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the
exit of a function. When the exit is right after the entry, it
combines the two events into one with the output of "function();",
instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events
includes storage that saves the entry event while it peaks at the
next event in the ring buffer. The peek can free the entry event so
the iterator must store the information to use it after the peek.
With the addition of function graph tracer recording the args, where
the args are a dynamic array in the entry event, the temp storage
does not save them. This causes the args to be corrupted or even
cause a read of unsafe memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer
will be printed to the console. But it can also be triggered by
sysrq-z. If a sysrq-z is triggered while a task is reading trace_pipe
it can cause a race in the ftrace_dump() where it checks if the
buffer has content, then it checks if the next event is available,
and then prints the output (regardless if the next event was
available or not). Reading trace_pipe at the same time can cause it
to not be available, and this triggers a WARN_ON in the print. Move
the printing into the check if the next event exists or not
* tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Also allocate and copy hash for reading of filter files
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
fgraph: Copy args in intermediate storage with entry
trace/fgraph: Fix the warning caused by missing unregister notifier
ring-buffer: Remove redundant semicolons
tracing: Limit access to parser->buffer when trace_get_user failed
rtla: Check pkg-config install
tools/latency-collector: Check pkg-config install
Pull block fixes from Jens Axboe:
"A set of fixes for block that should go into this tree. A bit larger
than what I usually have at this point in time, a lot of that is the
continued fixing of the lockdep annotation for queue freezing that we
recently added, which has highlighted a number of little issues here
and there. This contains:
- MD pull request via Yu:
- Add a legacy_async_del_gendisk mode, to prevent a user tools
regression. New user tools releases will not use such a mode,
the old release with a new kernel now will have warning about
deprecated behavior, and we prepare to remove this legacy mode
after about a year later
- The rename in kernel causing user tools build failure, revert
the rename in mdp_superblock_s
- Fix a regression that interrupted resync can be shown as
recover from mdstat or sysfs
- Improve file size detection for loop, particularly for networked
file systems, by using getattr to get the size rather than the
cached inode size.
- Hotplug CPU lock vs queue freeze fix
- Lockdep fix while updating the number of hardware queues
- Fix stacking for PI devices
- Silence bio_check_eod() for the known case of device removal where
the size is truncated to 0 sectors"
* tag 'block-6.17-20250822' of git://git.kernel.dk/linux:
block: avoid cpu_hotplug_lock depedency on freeze_lock
block: decrement block_rq_qos static key in rq_qos_del()
block: skip q->rq_qos check in rq_qos_done_bio()
blk-mq: fix lockdep warning in __blk_mq_update_nr_hw_queues
block: tone down bio_check_eod
loop: use vfs_getattr_nosec for accurate file size
loop: Consolidate size calculation logic into lo_calculate_size()
block: remove newlines from the warnings in blk_validate_integrity_limits
block: handle pi_tuple_size in queue_limits_stack_integrity
selftests: ublk: Use ARRAY_SIZE() macro to improve code
md: fix sync_action incorrect display during resync
md: add helper rdev_needs_recovery()
md: keep recovery_cp in mdp_superblock_s
md: add legacy_async_del_gendisk mode
Pull misc fixes from Andrew Morton:
"20 hotfixes. 10 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 17 of these
fixes are for MM.
As usual, singletons all over the place, apart from a three-patch
series of KHO followup work from Pasha which is actually also a bunch
of singletons"
* tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mremap: fix WARN with uffd that has remap events disabled
mm/damon/sysfs-schemes: put damos dests dir after removing its files
mm/migrate: fix NULL movable_ops if CONFIG_ZSMALLOC=m
mm/damon/core: fix damos_commit_filter not changing allow
mm/memory-failure: fix infinite UCE for VM_PFNMAP pfn
MAINTAINERS: mark MGLRU as maintained
mm: rust: add page.rs to MEMORY MANAGEMENT - RUST
iov_iter: iterate_folioq: fix handling of offset >= folio size
selftests/damon: fix selftests by installing drgn related script
.mailmap: add entry for Easwar Hariharan
selftests/mm: add test for invalid multi VMA operations
mm/mremap: catch invalid multi VMA moves earlier
mm/mremap: allow multi-VMA move when filesystem uses thp_get_unmapped_area
mm/damon/core: fix commit_ops_filters by using correct nth function
tools/testing: add linux/args.h header and fix radix, VMA tests
mm/debug_vm_pgtable: clear page table entries at destroy_args()
squashfs: fix memory leak in squashfs_fill_super
kho: warn if KHO is disabled due to an error
kho: mm: don't allow deferred struct page with KHO
kho: init new_physxa->phys_bits to fix lockdep
Pull power management fixes from Rafael Wysocki:
"These fix a cpuidle menu governor issue and two issues in the cpupower
utility:
- Prevent the menu cpuidle governor from selecting idle states with
exit latency exceeding the current PM QoS limit after stopping the
scheduler tick (Rafael Wysocki)
- Make the set subcommand's -t option in the cpupower utility work as
documented and allow it to control the CPU boost feature of cpufreq
beyond x86 (Shinji Nomoto)"
* tag 'pm-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: governors: menu: Avoid selecting states with too much latency
cpupower: Allow control of boost feature on non-x86 based systems with boost support.
cpupower: Fix a bug where the -t option of the set subcommand was not working.
Pull sched_ext fixes from Tejun Heo:
- Fix a subtle bug during SCX enabling where a dead task skips init
but doesn't skip sched class switch leading to invalid task state
transition warning
- Cosmetic fix in selftests
* tag 'sched_ext-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
selftests/sched_ext: Remove duplicate sched.h header
sched/ext: Fix invalid task state transitions on class switch
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth.
Current release - fix to a fix:
- usb: asix_devices: fix PHY address mask in MDIO bus initialization
Current release - regressions:
- Bluetooth: fixes for the split between BIS_LINK and PA_LINK
- Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN
flag", breaks compatibility with some existing device tree blobs
- dsa: b53: fix reserved register access in b53_fdb_dump()
Current release - new code bugs:
- sched: dualpi2: run probability update timer in BH to avoid
deadlock
- eth: libwx: fix the size in RSS hash key population
- pse-pd: pd692x0: improve power budget error paths and handling
Previous releases - regressions:
- tls: fix handling of zero-length records on the rx_list
- hsr: reject HSR frame if skb can't hold tag
- bonding: fix negotiation flapping in 802.3ad passive mode
Previous releases - always broken:
- gso: forbid IPv6 TSO with extensions on devices with only IPV6_CSUM
- sched: make cake_enqueue return NET_XMIT_CN when past buffer_limit,
avoid packet drops with low buffer_limit, remove unnecessary WARN()
- sched: fix backlog accounting after modifying config of a qdisc in
the middle of the hierarchy
- mptcp: improve handling of skb extension allocation failures
- eth: mlx5:
- fixes for the "HW Steering" flow management method
- fixes for QoS and device buffer management"
* tag 'net-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: nf_reject: don't leak dst refcount for loopback packets
net/mlx5e: Preserve shared buffer capacity during headroom updates
net/mlx5e: Query FW for buffer ownership
net/mlx5: Restore missing scheduling node cleanup on vport enable failure
net/mlx5: Fix QoS reference leak in vport enable error path
net/mlx5: Destroy vport QoS element when no configuration remains
net/mlx5e: Preserve tc-bw during parent changes
net/mlx5: Remove default QoS group and attach vports directly to root TSAR
net/mlx5: Base ECVF devlink port attrs from 0
net: pse-pd: pd692x0: Skip power budget configuration when undefined
net: pse-pd: pd692x0: Fix power budget leak in manager setup error path
Octeontx2-af: Skip overlap check for SPI field
selftests: tls: add tests for zero-length records
tls: fix handling of zero-length records on the rx_list
net: airoha: ppe: Do not invalid PPE entries in case of SW hash collision
selftests: bonding: add test for passive LACP mode
bonding: send LACPDUs periodically in passive mode after receiving partner's LACPDU
bonding: update LACP activity flag after setting lacp_active
Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag"
ipv6: sr: Fix MAC comparison to be constant-time
...
Pull LoongArch fixes from Huacai Chen:
"Fix a lot of build warnings for LTO-enabled objtool check, increase
COMMAND_LINE_SIZE up to 4096, rename a missing GCC_PLUGIN_STACKLEAK to
KSTACK_ERASE, and fix some bugs about arch timer, module loading, LBT
and KVM"
* tag 'loongarch-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Add address alignment check in pch_pic register access
LoongArch: KVM: Use kvm_get_vcpu_by_id() instead of kvm_get_vcpu()
LoongArch: KVM: Fix stack protector issue in send_ipi_data()
LoongArch: KVM: Make function kvm_own_lbt() robust
LoongArch: Rename GCC_PLUGIN_STACKLEAK to KSTACK_ERASE
LoongArch: Save LBT before FPU in setup_sigcontext()
LoongArch: Optimize module load time by optimizing PLT/GOT counting
LoongArch: Add cpuhotplug hooks to fix high cpu usage of vCPU threads
LoongArch: Increase COMMAND_LINE_SIZE up to 4096
LoongArch: Pass annotate-tablejump option if LTO is enabled
objtool/LoongArch: Get table size correctly if LTO is enabled
Add a selftest to verify bonding behavior when `lacp_active` is set to `off`.
The test checks the following:
- The passive LACP bond should not send LACPDUs before receiving a partner's
LACPDU.
- The transmitted LACPDUs must not include the active flag.
- After transitioning to EXPIRED and DEFAULTED states, the passive side should
still not initiate LACPDUs.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250815062000.22220-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull bootconfig fix from Masami Hiramatsu:
"Fix negative seeks on 32-bit with LFS enabled
On 32bit architecture, -BOOTCONFIG_FOOTER_SIZE (size_t, 32bit) becomes
a positive value when it is passed to lseek() because it is cast to
off_t (64bit). Thus, add type casts"
* tag 'bootconfig-fixes-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Fix negative seeks on 32-bit with LFS enabled
Commit 26dda57695 "tools/bootconfig: Cleanup bootconfig footer size
calculations" replaced some expressions of type int with the
BOOTCONFIG_FOOTER_SIZE macro, which expands to an expression of type
size_t, which is unsigned.
On 32-bit architectures with LFS enabled (i.e. off_t is 64-bit), the
seek offset of -BOOTCONFIG_FOOTER_SIZE now turns into a positive
value.
Fix this by casting the size to off_t before negating it.
Just in case someone changes BOOTCONFIG_MAGIC_LEN to have type size_t
later, do the same thing to the seek offset of -BOOTCONFIG_MAGIC_LEN.
Link: https://lore.kernel.org/all/aKHlevxeg6Y7UQrz@decadent.org.uk/
Fixes: 26dda57695 ("tools/bootconfig: Cleanup bootconfig footer size calculations")
Signed-off-by: Ben Hutchings <benh@debian.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many
objtool warnings "sibling call from callable instruction with modified
stack frame".
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
It needs to do something on the LLVM side to make sure that there is the
relocation section '.rela.discard.tablejump_annotate' if LTO is enabled,
but in order to maintain compatibility for the current LLVM compiler,
this can be done in the kernel Makefile for now. Ensure it is aware of
linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via
'-mllvm' to ld.lld.
Before doing the above changes, it should handle the special case of the
relocation section '.rela.discard.tablejump_annotate' to get the correct
table size first, otherwise there are many objtool warnings and errors
if LTO is enabled.
There are many different rodata for each function if LTO is enabled, it
is necessary to enhance get_rodata_table_size_by_table_annotate().
Fixes: b95f852d3a ("objtool/LoongArch: Add support for switch table")
Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The tool pkg-config used to check libtraceevent and libtracefs, if not
installed, it will report the libs not found, even though they have
already been installed.
Before:
libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel
libtracefs is missing. Please install libtracefs-dev/libtracefs-devel
After:
Makefile.config:10: *** Error: pkg-config needed by libtraceevent/libtracefs is missing
on this system, please install it.
Link: https://lore.kernel.org/20250808040527.2036023-2-chen.dylane@linux.dev
Fixes: 01474dc706 ("tools/rtla: Use tools/build makefiles to build rtla")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tool pkg-config used to check libtraceevent and libtracefs, if not
installed, it will report the libs not found, even though they have
already been installed.
Before:
libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel
libtracefs is missing. Please install libtracefs-dev/libtracefs-devel
After:
Makefile.config:10: *** Error: pkg-config needed by libtraceevent/libtracefs is missing
on this system, please install it.
Link: https://lore.kernel.org/20250808040527.2036023-1-chen.dylane@linux.dev
Fixes: 9d56c88e52 ("tools/tracing: Use tools/build makefiles on latency-collector")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
We can use UFFD to easily assert invalid multi VMA moves, so do so,
asserting expected behaviour when VMAs invalid for a multi VMA operation
are encountered.
We assert both that such operations are not permitted, and that we do not
even attempt to move the first VMA under these circumstances.
We also assert that we can still move a single VMA regardless.
We then assert that a partial failure can occur if the invalid VMA appears
later in the range of multiple VMAs, both at the very next VMA, and also at
the end of the range.
As part of this change, we are using the is_range_valid() helper more
aggressively. Therefore, fix a bug where stale buffered data would hang
around on success, causing subsequent calls to is_range_valid() to
potentially give invalid results.
We simply have to fflush() the stream on success to resolve this issue.
Link: https://lkml.kernel.org/r/c4fb86dd5ba37610583ad5fc0e0c2306ddf318b9.1754218667.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull vfs fixes from Christian Brauner:
- Fix two memory leaks in pidfs
- Prevent changing the idmapping of an already idmapped mount without
OPEN_TREE_CLONE through open_tree_attr()
- Don't fail listing extended attributes in kernfs when no extended
attributes are set
- Fix the return value in coredump_parse()
- Fix the error handling for unbuffered writes in netfs
- Fix broken data integrity guarantees for O_SYNC writes via iomap
- Fix UAF in __mark_inode_dirty()
- Keep inode->i_blkbits constant in fuse
- Fix coredump selftests
- Fix get_unused_fd_flags() usage in do_handle_open()
- Rename EXPORT_SYMBOL_GPL_FOR_MODULES to EXPORT_SYMBOL_FOR_MODULES
- Fix use-after-free in bh_read()
- Fix incorrect lflags value in the move_mount() syscall
* tag 'vfs-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
signal: Fix memory leak for PIDFD_SELF* sentinels
kernfs: don't fail listing extended attributes
coredump: Fix return value in coredump_parse()
fs/buffer: fix use-after-free when call bh_read() helper
pidfs: Fix memory leak in pidfd_info()
netfs: Fix unbuffered write error handling
fhandle: do_handle_open() should get FD with user flags
module: Rename EXPORT_SYMBOL_GPL_FOR_MODULES to EXPORT_SYMBOL_FOR_MODULES
fs: fix incorrect lflags value in the move_mount syscall
selftests/coredump: Remove the read() that fails the test
fuse: keep inode->i_blkbits constant
iomap: Fix broken data integrity guarantees for O_SYNC writes
selftests/mount_setattr: add smoke tests for open_tree_attr(2) bug
open_tree_attr: do not allow id-mapping changes without OPEN_TREE_CLONE
fs: writeback: fix use-after-free in __mark_inode_dirty()
GCC was complaining about the new label:
mptcp_inq.c:79:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
79 | int err = getaddrinfo(node, service, hints, res);
| ^
mptcp_sockopt.c:166:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
166 | int err = getaddrinfo(node, service, hints, res);
| ^
Simply declare 'err' before the label to avoid this warning.
Fixes: dd367e81b7 ("selftests: mptcp: sockopt: use IPPROTO_MPTCP for getaddrinfo")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-8-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This modification is linked to the parent commit where the received
ADD_ADDR limit was accidentally reset when the endpoints were flushed.
To validate that, the test is now flushing endpoints after having set
new limits, and before checking them.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-3-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge a cpupower utility fix for 6.17-rc3 from Shuah Khan:
"Fixes set subcommand -t option and enables boost control feature on
non-x86 platforms that support boost control."
* tag 'linux-cpupower-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Allow control of boost feature on non-x86 based systems with boost support.
cpupower: Fix a bug where the -t option of the set subcommand was not working.
Use ARRAY_SIZE() macro while calculating size of an array to improve
code readability and reduce potential sizing errors.
Implement this suggestion given by spatch tool by running
coccinelle script - scripts/coccinelle/misc/array_size.cocci
Follow ARRAY_SIZE() macro usage pattern in ublk.c introduced by,
commit ec12009318 ("selftests: ublk: fix ublk_find_tgt()")
wherever appropriate to maintain consistency.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/aKGihYui6/Pcijbk@bhairav-test.ee.iitb.ac.in
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The CI has hit a couple of cases of:
RUN global.data_steal ...
tls.c:2762:data_steal:Expected recv(cfd, buf2, sizeof(buf2), MSG_DONTWAIT) (20000) == -1 (-1)
data_steal: Test terminated by timeout
FAIL global.data_steal
Looks like the 2msec sleep is not long enough. Make the sleep longer,
and then instead of second sleep wait for the thieving process to exit.
That way we can be sure it called recv() before us.
While at it also avoid trying to steal more than a record, this seems
to be causing issues in manual testing as well.
Fixes: d7e82594a4 ("selftests: tls: test TCP stealing data from under the TLS socket")
Link: https://patch.msgid.link/20250814194323.2014650-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cpufreq subsystem has a generic sysfs interface for controlling boost
(/sys/devices/system/cpu/cpufreq/boost).
The sysfs interface can be used to enable boost control from the cpupower
command on non-x86 platforms as well. So, allow boost controlling
on non-x86 system if boost sysfs file exists.
The set subcommand enables/disables the boost feature using the following
syntax:
cpupower set --boost 1
cpupower set --boost 0
The --boost option is an alias for --turbo-boost. We provided the neutral
option name because the name "turbo boost" is specific to Intel technology.
The frequency-info subcommand displays the enabled/disabled state of
the boost feature as follows:
boost state support:
Active: yes (or no)
Link: https://lore.kernel.org/r/20250522061122.2149188-3-fj5851bi@fujitsu.com
Signed-off-by: Shinji Nomoto <fj5851bi@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add tests to ensure proper backlog accounting in hhf, codel, pie, fq,
fq_pie, and fq_codel qdiscs. We check for the bug pattern originally
found in fq, fq_pie, and fq_codel, which was an underflow in the tbf
parent backlog stats upon child qdisc removal.
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250812235808.45281-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread
config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive
warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
Pull misc fixes from Andrew Morton:
"12 hotfixes. 5 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels.
10 of these fixes are for MM"
* tag 'mm-hotfixes-stable-2025-08-12-20-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: proc_maps_open allow proc_mem_open to return NULL
mm/mremap: avoid expensive folio lookup on mremap folio pte batch
userfaultfd: fix a crash in UFFDIO_MOVE when PMD is a migration entry
mm: pass page directly instead of using folio_page
selftests/proc: fix string literal warning in proc-maps-race.c
fs/proc/task_mmu: hold PTL in pagemap_hugetlb_range and gather_hugetlb_stats
mm/smaps: fix race between smaps_hugetlb_range and migration
mm: fix the race between collapse and PT_RECLAIM under per-vma lock
mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup()
MAINTAINERS: add Masami as a reviewer of hung task detector
mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock
kasan/test: fix protection against compiler elision
The test is implicitly assuming the device only has 2 queues.
A real device will likely have more. The exact problem is that
because NAPIs get added to the list from the head, the netlink
dump reports them in reverse order. So the naive napis[0] will
actually likely give us the _last_ NAPI, not the first one.
Re-enable all the NAPIs instead of hard-coding 2 in the test.
This way the NAPIs we operated on will always reappear,
doesn't matter where they were in the registration order.
Fixes: e6d7626881 ("net: Update threaded state in napi config in netif_set_threaded")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change resolves non literal string format warning invoked for
proc-maps-race.c while compiling.
proc-maps-race.c:205:17: warning: format not a string literal and no format arguments [-Wformat-security]
205 | printf(text);
| ^~~~~~
proc-maps-race.c:209:17: warning: format not a string literal and no format arguments [-Wformat-security]
209 | printf(text);
| ^~~~~~
proc-maps-race.c: In function `print_last_lines':
proc-maps-race.c:224:9: warning: format not a string literal and no format arguments [-Wformat-security]
224 | printf(start);
| ^~~~~~
Add string format specifier %s for the printf calls in both
print_first_lines() and print_last_lines() thus resolving the warnings.
The test executes fine after this change thus causing no effect to the
functional behavior of the test.
Link: https://lkml.kernel.org/r/20250804225633.841777-1-hsukrut3@gmail.com
Fixes: aadc099c48 ("selftests/proc: add verbose mode for /proc/pid/maps tearing tests")
Signed-off-by: Sukrut Heroorkar <hsukrut3@gmail.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: David Hunter <david.hunter.linux@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Resolve a conflict between
commit 6a68d28066 ("selftests/coredump: Fix "socket_detect_userspace_client" test failure")
and
commit 994dc26302 ("selftests/coredump: fix build")
The first commit adds a read() to wait for write() from another thread to
finish. But the second commit removes the write().
Now that the two commits are in the same tree, the read() now gets EOF and
the test fails.
Remove this read() so that the test passes.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/20250811074957.4079616-1-namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull turbostat updates from Len Brown:
"tools/power turbostat: version 2025.09.09
- Probe and display L3 Cache topology
- Add ability to average an added counter (useful for pre-integrated
"counters", such as Watts)
- Break the limit of 64 built-in counters
- Assorted bug fixes and minor feature tweaks"
* tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.09.09
tools/power turbostat: Handle non-root legacy-uncore sysfs permissions
tools/power turbostat: standardize PER_THREAD_PARAMS
tools/power turbostat: Fix DMR support
tools/power turbostat: add format "average" for external attributes
tools/power turbostat: delete GET_PKG()
tools/power turbostat: probe and display L3 cache topology
tools/power turbostat: Support more than 64 built-in-counters
tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columns
tools/power turbostat: Fix bogus SysWatt for forked program
tools/power turbostat: Handle cap_get_proc() ENOSYS
tools/power turbostat: Fix build with musl
tools/power turbostat: verify arguments to params --show and --hide
tools/power turbostat: regression fix: --show C1E%
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
Signed-off-by: Len Brown <len.brown@intel.com>
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Original-patch-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Together with the RAPL MSRs, there are more MSRs gone on DMR, including
PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response
Time Limit) MSRs. The configurable TDP info should also be retrieved
from TPMI based Intel Speed Select Technology feature.
Remove the access of these MSRs for DMR. Improve the DMR platform
feature table to make it more readable at the same time.
Fixes: 83075bd59d ("tools/power turbostat: Add initial support for DMR")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
External atributes with format "raw" are not printed in summary lines
for nodes/packages (or with option -S). The new format "average"
behaves like "raw" but also adds the summary data
Signed-off-by: Michael Hebenstreit <michael.hebenstreit@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We have out-grown the ability to use a 64-bit memory location
to inventory every possible built-in counter.
Leverage the the CPU_SET(3) macros to break this barrier.
Also, break the Joules & Watts counters into two,
since we can no longer 'or' them together...
Signed-off-by: Len Brown <len.brown@intel.com>
