Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
Samsung DTS ARM64 changes for v6.20, part two
Add DPU clock management unit nodes to Google GS101.
* tag 'samsung-dt64-6.20-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: gs101: add cmu_dpu and sysreg_dpu dt nodes
dt-bindings: clock: google,gs101-clock: Add DPU clock management unit
dt-bindings: clock: google,gs101-clock: fix alphanumeric ordering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm64 DeviceTree for v6.20
Introduce the Kaanapali SoC, with the MTP and QRD devices. Introduce
support for the Milos SoC (SM7635) and initial support for the Fairphone
(Gen 6) device on this platform.
Add the QCS6490-based RubikPI3 board, the QRB2210-based Arduino UnoQ,
the X Elite-based Medion SPRCHRGD 14 S1 and Surface Pro 11 laptops, and
the SDM845-based Pixel 3 and Pixel 3 XL devices.
On the Kodiak-based (QCS6490) RB3Gen2 the TC9563 PCIe switch controller
is described.
On Lemans (SA8775P/QCS9075) the GPU and crypto blocks are added.
IO-regions and clocks are added to interconnect nodes to allow QoS
configuration. GPU, TPM and USB support are enabled on the evaluation
kit (EVK).
On Monaco (QCS8300) the two PCIe controllers, the camera subsystem,
tsens, display subsystem, crypto, CPUfreq, and coresight are added. On
the evaluation kit (EVK) the PCIe busses are enabled, together with an
AMC6821-based fan controller and the ST33 TPM chip.
On MSM8939 the camera subsystem is described. The Asus ZenFone 2
Laser/Selfie gains battery and hall sensor support.
On the Agatti-based RB1 board PM8008 is described and an overlay for the
Vision mezzanine is introduced.
On SDM630 the compute DSP remoteproc, FastRPC and related entites are
described. The LPASS LPI pinctrl node is described.
On SDM845-based OnePlus device the bootloader framebuffer and its
resources are described, to improve the transition. On the SDM845-based
devices from OnePlus, SHIFT, and Xiaomi ath10k calibration variants are
specified. The sensor remoteproc is enabled on Xiaomi Pocophone F1.
On SM7225-based Fairphone FP4 regulators for the cameras are described,
and the camera EEPROM is added.
On SM8650 the camera subsystem is described. On the QRD the Samsung
S5KJN1 camera sensor is added, and for the HDK an overlay for the "Rear
Camera Card" is added.
On SM8750 CPUfreq, SDCHCI and Iris (video encode/decode) support are
added, and missing - required - properties for the BAM DMA is added.
These are then enabled on the MTP.
On Talos (SM6150/QCS615) PMU, DisplayPort, and USB/DP combo PHY are added.
DisplayPort is enabled on the Talos Ride board.
On Hamoa (X Elite) add crypto engine, missing TCSR reference clocks, and
random number generator block. The soc bus address width is corrected to
match the hardware. On the Lenovo Thinkpad T14s HDMI and audio playback
over DisplayPort is introduced. HDMI, Iris (video encode/decode) and
PS8830 retimers are described for the ASUS Vivobook S 15. On the Hamoa
evaluation kit (EVK) PCIe busses, WiFi, backlight, TPM and RG
(red/green) LEDs are described.
Enable QSEECOM, and thereby UEFI variable access, on the Medion SPRCHRGD
14 S1 (commit should have been on drivers branch).
* tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (155 commits)
dt-bindings: mailbox: qcom: Add IPCC support for Kaanapali and Glymur Platforms
dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings for Kaanapali
arm64: dts: qcom: lemans: enable static TPDM
arm64: dts: qcom: kodiak: Add memory region for audiopd
arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes
arm64: dts: qcom: x1e: bus is 40-bits (fix 64GB models)
arm64: dts: qcom: lemans; Add EL2 overlay
arm64: dts: qcom: sm8150: add uart13
arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1
arm64: dts: qcom: sdm845-db845c: drop CS from SPIO0
arm64: dts: qcom: qrb4210-rb2: Fix UART3 wakeup IRQ storm
arm64: dts: qcom: sm6125-ginkgo: Fix missing msm-id subtype
arm64: dts: qcom: qcs8300: Add GPU cooling
arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration
arm64: dts: qcom: hamoa-iot-evk: Enable TPM (ST33) on SPI11
arm64: dts: qcom: talos: Add PMU support
arm64: dts: qcom: talos: switch to interrupt-cells 4 to add PPI partitions
arm64: dts: qcom: ipq9574: Complete USB DWC3 wrapper interrupts
arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts
arm64: dts: qcom: monaco: Add CTCU and ETR nodes
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas RZ/T2H and RZ/N2H PCLKCAN Clock DT Binding Definitions
PCLKCAN Clock DT binding definitions for the Renesas RZ/T2H (R9A09G077)
and RZ/N2H (R9A09G087) SoCs, shared by driver and DT source files.
Remove the definitions of number of clocks from bindings because they
prevent adding new clocks. Since the previous patch removed all refereces
within the driver, they can now be deleted.
The same for resets and plls.
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
NSS clock controller provides the clocks and resets to the networking
blocks such as PPE (Packet Process Engine) and UNIPHY (PCS) on IPQ5424
devices.
Add support for the compatible string "qcom,ipq5424-nsscc" based on the
existing IPQ9574 NSS clock controller Device Tree binding. Additionally,
update the clock names for PPE and NSS for newer SoC additions like
IPQ5424 to use generic and reusable identifiers "nss" and "ppe" without
the clock rate suffix.
Also add master/slave ids for IPQ5424 networking interfaces, which is
used by nss-ipq5424 driver for providing interconnect services using
icc-clk framework.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-7-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
- Speed up clk_core_lookup() by using a hashtable
* clk-microchip:
ARM: at91: remove default values for PMC_PLL_ACR
clk: at91: add ACR in all PLL settings
clk: at91: sam9x7: Add peripheral clock id for pmecc
clk: at91: clk-master: Add check for divide by 3
clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register
ARM: at91: pm: save and restore ACR during PLL disable/enable
* clk-lookup:
clk: Use hashtable for global clk lookups
clk: Sort include statements
* clk-st:
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
