Charlie Jenkins <charlie@rivosinc.com> says:
There have been a couple of reports that using the hint address to
restrict the address returned by mmap hint address has caused issues in
applications. A different solution for restricting addresses returned by
mmap is necessary to avoid breakages.
[Palmer: This also just wasn't doing the right thing in the first place,
as it didn't handle the sv39 cases we were trying to deal with.]
* b4-shazam-merge:
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-0-cd8962afe47f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Evan Green <evan@rivosinc.com> says:
The CPUPERF0 hwprobe key was documented and identified in code as
a bitmask value, but its contents were an enum. This produced
incorrect behavior in conjunction with the WHICH_CPUS hwprobe flag.
The first patch in this series fixes the bitmask/enum problem by
creating a new hwprobe key that returns the same data, but is
properly described as a value instead of a bitmask. The second patch
renames the value definitions in preparation for adding vector misaligned
access info. As of this version, the old defines are kept in place to
maintain source compatibility with older userspace programs.
* b4-shazam-merge:
RISC-V: hwprobe: Add SCALAR to misaligned perf defines
RISC-V: hwprobe: Add MISALIGNED_PERF key
Link: https://lore.kernel.org/r/20240809214444.3257596-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In preparation for misaligned vector performance hwprobe keys, rename
the hwprobe key values associated with misaligned scalar accesses to
include the term SCALAR. Leave the old defines in place to maintain
source compatibility.
This change is intended to be a functional no-op.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240809214444.3257596-3-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISCV_HWPROBE_KEY_CPUPERF_0 was mistakenly flagged as a bitmask in
hwprobe_key_is_bitmask(), when in reality it was an enum value. This
causes problems when used in conjunction with RISCV_HWPROBE_WHICH_CPUS,
since SLOW, FAST, and EMULATED have values whose bits overlap with
each other. If the caller asked for the set of CPUs that was SLOW or
EMULATED, the returned set would also include CPUs that were FAST.
Introduce a new hwprobe key, RISCV_HWPROBE_KEY_MISALIGNED_PERF, which
returns the same values in response to a direct query (with no flags),
but is properly handled as an enumerated value. As a result, SLOW,
FAST, and EMULATED are all correctly treated as distinct values under
the new key when queried with the WHICH_CPUS flag.
Leave the old key in place to avoid disturbing applications which may
have already come to rely on the key, with or without its broken
behavior with respect to the WHICH_CPUS flag.
Fixes: e178bf146e ("RISC-V: hwprobe: Introduce which-cpus flag")
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240809214444.3257596-2-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The RISC-V architecture makes a real time counter CSR (via RDTIME
instruction) available for applications in U-mode but there is no
architected mechanism for an application to discover the frequency
the counter is running at. Some applications (e.g., DPDK) use the
time counter for basic performance analysis as well as fine grained
time-keeping.
Add support to the hwprobe system call to export the time CSR
frequency to code running in U-mode.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Punit Agrawal <punit.agrawal@bytedance.com>
Link: https://lore.kernel.org/r/20240702033731.71955-2-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This harmonizes all virtual addressing modes which can now all map
(PGDIR_SIZE * PTRS_PER_PGD) / 4 of physical memory.
The RISCV implementation of KASAN requires that the boundary between
shallow mappings are aligned on an 8G boundary. In this case we need
VMALLOC_START to be 8G aligned. So although we only need to move the
start of the linear mapping down by 4GiB to allow 128GiB to be mapped,
we actually move it down by 8GiB (creating a 4GiB hole between the
linear mapping and KASAN shadow space) to maintain the alignment
requirement.
Signed-off-by: Stuart Menefy <stuart.menefy@codasip.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240630110550.1731929-1-stuart.menefy@codasip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull RISC-V updates from Palmer Dabbelt:
- Support for various new ISA extensions:
* The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
extension
* Zimop and Zcmop for may-be-operations
* The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension
* Zawrs
- riscv,cpu-intc is now dtschema
- A handful of performance improvements and cleanups to text patching
- Support for memory hot{,un}plug
- The highest user-allocatable virtual address is now visible in
hwprobe
* tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (58 commits)
riscv: lib: relax assembly constraints in hweight
riscv: set trap vector earlier
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
riscv: hwprobe: export highest virtual userspace address
riscv: Improve sbi_ecall() code generation by reordering arguments
riscv: Add tracepoints for SBI calls and returns
riscv: Optimize crc32 with Zbc extension
riscv: Enable DAX VMEMMAP optimization
riscv: mm: Add support for ZONE_DEVICE
virtio-mem: Enable virtio-mem for RISC-V
riscv: Enable memory hotplugging for RISC-V
riscv: mm: Take memory hotplug read-lock during kernel page table dump
riscv: mm: Add memory hotplugging support
riscv: mm: Add pfn_to_kaddr() implementation
riscv: mm: Refactor create_linear_mapping_range() for memory hot add
...
Pull powerpc updates from Michael Ellerman:
- Remove support for 40x CPUs & platforms
- Add support to the 64-bit BPF JIT for cpu v4 instructions
- Fix PCI hotplug driver crash on powernv
- Fix doorbell emulation for KVM on PAPR guests (nestedv2)
- Fix KVM nested guest handling of some less used SPRs
- Online NUMA nodes with no CPU/memory if they have a PCI device
attached
- Reduce memory overhead of enabling kfence on 64-bit Radix MMU kernels
- Reimplement the iommu table_group_ops for pseries for VFIO SPAPR TCE
Thanks to: Anjali K, Artem Savkov, Athira Rajeev, Breno Leitao, Brian
King, Celeste Liu, Christophe Leroy, Esben Haabendal, Gaurav Batra,
Gautam Menghani, Haren Myneni, Hari Bathini, Jeff Johnson, Krishna
Kumar, Krzysztof Kozlowski, Nathan Lynch, Nicholas Piggin, Nick Bowler,
Nilay Shroff, Rob Herring (Arm), Shawn Anastasio, Shivaprasad G Bhat,
Sourabh Jain, Srikar Dronamraju, Timothy Pearson, Uwe Kleine-König, and
Vaibhav Jain.
* tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (57 commits)
Documentation/powerpc: Mention 40x is removed
powerpc: Remove 40x leftovers
macintosh/therm_windtunnel: fix module unload.
powerpc: Check only single values are passed to CPU/MMU feature checks
powerpc/xmon: Fix disassembly CPU feature checks
powerpc: Drop clang workaround for builtin constant checks
powerpc64/bpf: jit support for signed division and modulo
powerpc64/bpf: jit support for sign extended mov
powerpc64/bpf: jit support for sign extended load
powerpc64/bpf: jit support for unconditional byte swap
powerpc64/bpf: jit support for 32bit offset jmp instruction
powerpc/pci: Hotplug driver bridge support
pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv
powerpc/configs: Update defconfig with now user-visible CONFIG_FSL_IFC
powerpc: add missing MODULE_DESCRIPTION() macros
macintosh/mac_hid: add MODULE_DESCRIPTION()
KVM: PPC: add missing MODULE_DESCRIPTION() macros
powerpc/kexec: Use of_property_read_reg()
powerpc/64s/radix/kfence: map __kfence_pool at page granularity
powerpc/pseries/iommu: Define spapr_tce_table_group_ops only with CONFIG_IOMMU_API
...
Pull documentation updates from Jonathan Corbet:
"Nothing hugely exciting happening in the documentation tree this time
around, mostly more of the usual:
- More Spanish, Italian, and Chinese translations
- A new script, scripts/checktransupdate.py, can be used to see which
commits have touched an (English) document since a given
translation was last updated.
- A couple of "best practices" suggestions (on Link: tags and
off-list discussions) that were not entirely at consensus level,
but I concluded they were close enough to accept.
- Some nice cleanups removing documentation for kernel parameters
that have not been recognized for ... a long time.
...along with the usual updates, typo fixes, and such"
* tag 'docs-6.11' of git://git.lwn.net/linux: (57 commits)
Documentation: Document user_events ioctl code
docs/pinctrl: fix typo in mapping example
docs: maintainer: discourage taking conversations off-list
docs: driver-model: platform: update the definition of platform_driver
docs/sp_SP: Add translation for scheduler/sched-design-CFS.rst
writing_musb_glue_layer.rst: Fix broken URL
zh_CN/admin-guide: one typo fix
docs/zh_CN/virt: Update the translation of guest-halt-polling.rst
Documentation: add reference from dynamic debug to loglevel kernel params
Documentation: best practices for using Link trailers
Documentation: fix links to mailing list services
Documentation: exception-tables.rst: Fix the wrong steps referenced
docs/zh_CN: add process/researcher-guidelines Chinese translation
Documentation/tools/rv: fix document header
docs/sp_SP: Add translation of process/maintainer-kvm-x86.rst
docs/admin-guide/mm: correct typo 'quired' to 'queried'
Add libps2 to the input section of driver-api
Docs/mm/index: move allocation profiling document to unsorted documents chapter
Docs/mm/index: rename 'Legacy Documentation' to 'Unsorted Documentation'
Docs/mm/index: Remove 'Memory Management Guide' chapter marker
...
Pull x86 SEV updates from Borislav Petkov:
- Add support for running the kernel in a SEV-SNP guest, over a Secure
VM Service Module (SVSM).
When running over a SVSM, different services can run at different
protection levels, apart from the guest OS but still within the
secure SNP environment. They can provide services to the guest, like
a vTPM, for example.
This series adds the required facilities to interface with such a
SVSM module.
- The usual fixlets, refactoring and cleanups
[ And as always: "SEV" is AMD's "Secure Encrypted Virtualization".
I can't be the only one who gets all the newer x86 TLA's confused,
can I?
- Linus ]
* tag 'x86_sev_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/ABI/configfs-tsm: Fix an unexpected indentation silly
x86/sev: Do RMP memory coverage check after max_pfn has been set
x86/sev: Move SEV compilation units
virt: sev-guest: Mark driver struct with __refdata to prevent section mismatch
x86/sev: Allow non-VMPL0 execution when an SVSM is present
x86/sev: Extend the config-fs attestation support for an SVSM
x86/sev: Take advantage of configfs visibility support in TSM
fs/configfs: Add a callback to determine attribute visibility
sev-guest: configfs-tsm: Allow the privlevel_floor attribute to be updated
virt: sev-guest: Choose the VMPCK key based on executing VMPL
x86/sev: Provide guest VMPL level to userspace
x86/sev: Provide SVSM discovery support
x86/sev: Use the SVSM to create a vCPU when not in VMPL0
x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0
x86/sev: Use kernel provided SVSM Calling Areas
x86/sev: Check for the presence of an SVSM in the SNP secrets page
x86/irqflags: Provide native versions of the local_irq_save()/restore()
Pull x86 resource control updates from Borislav Petkov:
- Enable Sub-NUMA clustering to work with resource control on Intel by
teaching resctrl to handle scopes due to the clustering which
partitions the L3 cache into sets. Modify and extend the subsystem to
handle such scopes properly
* tag 'x86_cache_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Update documentation with Sub-NUMA cluster changes
x86/resctrl: Detect Sub-NUMA Cluster (SNC) mode
x86/resctrl: Enable shared RMID mode on Sub-NUMA Cluster (SNC) systems
x86/resctrl: Make __mon_event_count() handle sum domains
x86/resctrl: Fill out rmid_read structure for smp_call*() to read a counter
x86/resctrl: Handle removing directories in Sub-NUMA Cluster (SNC) mode
x86/resctrl: Create Sub-NUMA Cluster (SNC) monitor files
x86/resctrl: Allocate a new field in union mon_data_bits
x86/resctrl: Refactor mkdir_mondata_subdir() with a helper function
x86/resctrl: Initialize on-stack struct rmid_read instances
x86/resctrl: Add a new field to struct rmid_read for summation of domains
x86/resctrl: Prepare for new Sub-NUMA Cluster (SNC) monitor files
x86/resctrl: Block use of mba_MBps mount option on Sub-NUMA Cluster (SNC) systems
x86/resctrl: Introduce snc_nodes_per_l3_cache
x86/resctrl: Add node-scope to the options for feature scope
x86/resctrl: Split the rdt_domain and rdt_hw_domain structures
x86/resctrl: Prepare for different scope for control/monitor operations
x86/resctrl: Prepare to split rdt_domain structure
x86/resctrl: Prepare for new domain scope
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
Andrew Jones <ajones@ventanamicro.com> says:
Zawrs provides two instructions (wrs.nto and wrs.sto), where both are
meant to allow the hart to enter a low-power state while waiting on a
store to a memory location. The instructions also both wait an
implementation-defined "short" duration (unless the implementation
terminates the stall for another reason). The difference is that while
wrs.sto will terminate when the duration elapses, wrs.nto, depending on
configuration, will either just keep waiting or an ILL exception will be
raised. Linux will use wrs.nto, so if platforms have an implementation
which falls in the "just keep waiting" category (which is not expected),
then it should _not_ advertise Zawrs in the hardware description.
Like wfi (and with the same {m,h}status bits to configure it), when
wrs.nto is configured to raise exceptions it's expected that the higher
privilege level will see the instruction was a wait instruction, do
something, and then resume execution following the instruction. For
example, KVM does configure exceptions for wfi (hstatus.VTW=1) and
therefore also for wrs.nto. KVM does this for wfi since it's better to
allow other tasks to be scheduled while a VCPU waits for an interrupt.
For waits such as those where wrs.nto/sto would be used, which are
typically locks, it is also a good idea for KVM to be involved, as it
can attempt to schedule the lock holding VCPU.
This series starts with Christoph's addition of the riscv
smp_cond_load_relaxed function which applies wrs.sto when available.
That patch has been reworked to use wrs.nto and to use the same approach
as Arm for the wait loop, since we can't have arbitrary C code between
the load-reserved and the wrs. Then, hwprobe support is added (since the
instructions are also usable from usermode), and finally KVM is
taught about wrs.nto, allowing guests to see and use the Zawrs
extension.
We still don't have test results from hardware, and it's not possible to
prove that using Zawrs is a win when testing on QEMU, not even when
oversubscribing VCPUs to guests. However, it is possible to use KVM
selftests to force a scenario where we can prove Zawrs does its job and
does it well. [4] is a test which does this and, on my machine, without
Zawrs it takes 16 seconds to complete and with Zawrs it takes 0.25
seconds.
This series is also available here [1]. In order to use QEMU for testing
a build with [2] is needed. In order to enable guests to use Zawrs with
KVM using kvmtool, the branch at [3] may be used.
[1] https://github.com/jones-drew/linux/commits/riscv/zawrs-v3/
[2] https://lore.kernel.org/all/20240312152901.512001-2-ajones@ventanamicro.com/
[3] https://github.com/jones-drew/kvmtool/commits/riscv/zawrs/
[4] cb2beccebc
Link: https://lore.kernel.org/r/20240426100820.14762-8-ajones@ventanamicro.com
* b4-shazam-merge:
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* for-next/vcpu-hotplug: (21 commits)
: arm64 support for virtual CPU hotplug (ACPI)
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
cpumask: Add enabled cpumask for present CPUs that can be brought online
arm64: document virtual CPU hotplug's expectations
arm64: Kconfig: Enable hotplug CPU on arm64 if ACPI_PROCESSOR is enabled.
arm64: arch_register_cpu() variant to check if an ACPI handle is now available.
arm64: psci: Ignore DENIED CPUs
irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs
irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc()
arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entry
arm64: acpi: Move get_cpu_for_acpi_id() to a header
ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug
ACPI: scan: switch to flags for acpi_scan_check_and_detach()
ACPI: processor: Register deferred CPUs from acpi_processor_get_info()
ACPI: processor: Add acpi_get_processor_handle() helper
ACPI: processor: Move checks and availability of acpi_processor earlier
ACPI: processor: Fix memory leaks in error paths of processor_add()
ACPI: processor: Return an error if acpi_processor_get_info() fails in processor_add()
ACPI: processor: Drop duplicated check on _STA (enabled + present)
cpu: Do not warn on arch_register_cpu() returning -EPROBE_DEFER
...
Some userspace applications (OpenJDK for instance) uses the free MSBs
in pointers to insert additional information for their own logic and
need to get this information from somewhere. Currently they rely on
parsing /proc/cpuinfo "mmu=svxx" string to obtain the current value of
virtual address usable bits [1]. Since this reflect the raw supported
MMU mode, it might differ from the logical one used internally which is
why arch_get_mmap_end() is used. Exporting the highest mmapable address
through hwprobe will allow a more stable interface to be used. For that
purpose, add a new hwprobe key named
RISCV_HWPROBE_KEY_HIGHEST_VIRT_ADDRESS which will export the highest
userspace virtual address.
Link: https://github.com/openjdk/jdk/blob/master/src/hotspot/os_cpu/linux_riscv/vm_version_linux_riscv.cpp#L171 [1]
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240410144558.1104006-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Most of memory.rst was written very early, at a time where TBI (Top
Byte Ignore) was not enabled. Nowadays TBI0 is always enabled, and
TBI1 may be enabled, depending on the kernel configuration. This
means that VA bits 63:56 cannot generally be assumed to have any
particular value.
Regardless of TBI, TTBRx selection is done based on bit 55; update
memory.rst accordingly.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240702091349.356008-1-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When it was in text format, it correctly hardcoded steps 8a to 8c.
However, after it was converted to RST, the sequence numbers were
auto-generated during rendering and became incorrect after some
steps were inserted.
Change it to refer to steps a to c in a relative way.
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
[jc: Indented the line to make the relative reference more clear]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240614010028.48262-1-lizhijian@fujitsu.com
With Sub-NUMA Cluster (SNC) mode enabled, the scope of monitoring resources
is per-NODE instead of per-L3 cache. Backwards compatibility is maintained
by providing files in the mon_L3_XX directories that sum event counts
for all SNC nodes sharing an L3 cache.
New files provide per-SNC node event counts.
Users should be aware that SNC mode also affects the amount of L3 cache
available for allocation within each SNC node.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20240628215619.76401-20-tony.luck@intel.com
Cortex-X4 erratum 3194386 and Neoverse-V3 erratum 3312417 are identical,
with duplicate Kconfig text and some unsightly ifdeffery. While we try
to share code behind CONFIG_ARM64_WORKAROUND_SPECULATIVE_SSBS, having
separate options results in a fair amount of boilerplate code, and this
will only get worse as we expand the set of affected CPUs.
To reduce this boilerplate, unify the two behind a common Kconfig
option. This removes the duplicate text and Kconfig logic, and removes
the need for the intermediate ARM64_WORKAROUND_SPECULATIVE_SSBS option.
The set of affected CPUs is described as a list so that this can easily
be extended.
I've used ARM64_ERRATUM_3194386 (matching the Neoverse-V3 erratum ID) as
the common option, matching the way we use ARM64_ERRATUM_1319367 to
cover Cortex-A57 erratum 1319537 and Cortex-A72 erratum 1319367.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <wilL@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
During early boot phases, check for the presence of an SVSM when running
as an SEV-SNP guest.
An SVSM is present if not running at VMPL0 and the 64-bit value at offset
0x148 into the secrets page is non-zero. If an SVSM is present, save the
SVSM Calling Area address (CAA), located at offset 0x150 into the secrets
page, and set the VMPL level of the guest, which should be non-zero, to
indicate the presence of an SVSM.
[ bp: Touchups. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/9d3fe161be93d4ea60f43c2a3f2c311fe708b63b.1717600736.git.thomas.lendacky@amd.com
The following Vector subextensions for "embedded" platforms are added
into RISCV_HWPROBE_KEY_IMA_EXT_0:
- ZVE32X
- ZVE32F
- ZVE64X
- ZVE64F
- ZVE64D
Extensions ending with an X indicates that the platform doesn't have a
vector FPU.
Extensions ending with F/D mean that whether single (F) or double (D)
precision vector operation is supported.
The number 32 or 64 follows from ZVE tells the maximum element length.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20240510-zve-detection-v5-6-0711bdd26c12@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We're stuck supporting scalar misaligned loads in userspace because they
were part of the ISA at the time we froze the uABI. That wasn't the
case for vector misaligned accesses, so depending on them
unconditionally is a userspace bug. All extant vector hardware traps on
these misaligned accesses.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240524185600.5919-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull arm64 fixes from Will Deacon:
"The major fix here is for a filesystem corruption issue reported on
Apple M1 as a result of buggy management of the floating point
register state introduced in 6.8. I initially reverted one of the
offending patches, but in the end Ard cooked a proper fix so there's a
revert+reapply in the series.
Aside from that, we've got some CPU errata workarounds and misc other
fixes.
- Fix broken FP register state tracking which resulted in filesystem
corruption when dm-crypt is used
- Workarounds for Arm CPU errata affecting the SSBS Spectre
mitigation
- Fix lockdep assertion in DMC620 memory controller PMU driver
- Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is
disabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: Avoid erroneous elide of user state reload
Reapply "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
perf/arm-dmc620: Fix lockdep assert in ->event_init()
Revert "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: errata: Add workaround for Arm errata 3194386 and 3312417
arm64: cputype: Add Neoverse-V3 definitions
arm64: cputype: Add Cortex-X4 definitions
arm64: barrier: Restore spec_bar() macro
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
Pull powerpc updates from Michael Ellerman:
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.
- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove
events.
- Other small features, cleanups and fixes.
Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.
* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...
Pull x86 resource control updates from Borislav Petkov:
- Add a tracepoint to read out LLC occupancy of resource monitor IDs
with the goal of freeing them sooner rather than later
- Other code improvements and cleanups
* tag 'x86_cache_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Add tracepoint for llc_occupancy tracking
x86/resctrl: Rename pseudo_lock_event.h to trace.h
x86/resctrl: Simplify call convention for MSR update functions
x86/resctrl: Pass domain to target CPU
Pull documentation updates from Jonathan Corbet:
"Another not-too-busy cycle for documentation, including:
- Some build-system changes to detect the variable fonts installed by
some distributions that can break the PDF build.
- Various updates and additions to the Spanish, Chinese, Italian, and
Japanese translations.
- Update the stable-kernel rules to match modern practice
... and the usual array of corrections, updates, and typo fixes"
* tag 'docs-6.10' of git://git.lwn.net/linux: (42 commits)
cgroup: Add documentation for missing zswap memory.stat
kernel-doc: Added "*" in $type_constants2 to fix 'make htmldocs' warning.
docs:core-api: fixed typos and grammar in printk-index page
Documentation: tracing: Fix spelling mistakes
docs/zh_CN/rust: Update the translation of quick-start to 6.9-rc4
docs/zh_CN/rust: Update the translation of general-information to 6.9-rc4
docs/zh_CN/rust: Update the translation of coding-guidelines to 6.9-rc4
docs/zh_CN/rust: Update the translation of arch-support to 6.9-rc4
docs: stable-kernel-rules: fix typo sent->send
docs/zh_CN: remove two inconsistent spaces
docs: scripts/check-variable-fonts.sh: Improve commands for detection
docs: stable-kernel-rules: create special tag to flag 'no backporting'
docs: stable-kernel-rules: explain use of stable@kernel.org (w/o @vger.)
docs: stable-kernel-rules: remove code-labels tags and a indention level
docs: stable-kernel-rules: call mainline by its name and change example
docs: stable-kernel-rules: reduce redundancy
docs, kprobes: Add riscv as supported architecture
Docs: typos/spelling
docs: kernel_include.py: Cope with docutils 0.21
docs: ja_JP/howto: Catch up update in v6.8
...
Cortex-X4 and Neoverse-V3 suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time. This is described in their Software Developer Errata Notice (SDEN)
documents:
* Cortex-X4 SDEN v8.0, erratum 3194386:
https://developer.arm.com/documentation/SDEN-2432808/0800/
* Neoverse-V3 SDEN v6.0, erratum 3312417:
https://developer.arm.com/documentation/SDEN-2891958/0600/
To workaround these errata, it is necessary to place a speculation
barrier (SB) after MSR to the SSBS special-purpose register. This patch
adds the requisite SB after writes to SSBS within the kernel, and hides
the presence of SSBS from EL0 such that userspace software which cares
about SSBS will manipulate this via prctl(PR_GET_SPECULATION_CTRL, ...).
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The patch titled ("powerpc: make fadump resilient with memory add/remove
events") has made significant changes to the implementation of fadump,
particularly on elfcorehdr creation and fadump crash info header
structure. Therefore, updating the fadump implementation documentation
to reflect those changes.
Following updates are done to firmware assisted dump documentation:
1. The elfcorehdr is no longer stored after fadump HDR in the reserved
dump area. Instead, the second kernel dynamically allocates memory
for the elfcorehdr within the address range from 0 to the boot memory
size. Therefore, update figures 1 and 2 of Memory Reservation during
the first and second kernels to reflect this change.
2. A version field has been added to the fadump header to manage the
future changes to fadump crash info header structure without changing
the fadump header magic number in the future. Therefore, remove the
corresponding TODO from the document.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240422195932.1583833-4-sourabhjain@linux.ibm.com
In our production environment, after removing monitor groups, those
unused RMIDs get stuck in the limbo list forever because their
llc_occupancy is always larger than the threshold. But the unused RMIDs
can be successfully freed by turning up the threshold.
In order to know how much the threshold should be, perf can be used to
acquire the llc_occupancy of RMIDs in each rdt domain.
Instead of using perf tool to track llc_occupancy and filter the log
manually, it is more convenient for users to use tracepoint to do this
work. So add a new tracepoint that shows the llc_occupancy of busy RMIDs
when scanning the limbo list.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240408092303.26413-3-haifeng.xu@shopee.com
