timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash.
The only non-trivial core change is an addition to unit attention
handling to recognize UAs for power on/reset and new media so the tape
driver can use it"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
scsi: st: Tighten the page format heuristics with MODE SELECT
scsi: st: ERASE does not change tape location
scsi: st: Fix array overflow in st_setup()
scsi: target: tcm_loop: Fix wrong abort tag
scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
scsi: hisi_sas: Fixed failure to issue vendor specific commands
scsi: fnic: Remove unnecessary NUL-terminations
scsi: fnic: Remove redundant flush_workqueue() calls
scsi: core: Use a switch statement when attaching VPD pages
scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
scsi: ufs: renesas: Add reusable functions
scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
scsi: ufs: renesas: Remove register control helper function
scsi: ufs: renesas: Add register read to remove save/set/restore
scsi: ufs: renesas: Replace init data by init code
scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
scsi: mpi3mr: Task Abort EH Support
scsi: storvsc: Don't report the host packet status as the hv status
scsi: isci: Make most module parameters static
scsi: megaraid_sas: Make most module parameters static
...
Pull block updates from Jens Axboe:
- Fixes for integrity handling
- NVMe pull request via Keith:
- Secure concatenation for TCP transport (Hannes)
- Multipath sysfs visibility (Nilay)
- Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
- Correct use of 64-bit BARs for pci-epf target (Niklas)
- Socket fix for selinux when used in containers (Peijie)
- MD pull request via Yu:
- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)
- Series cleaning up and fixing bugs in the bad block handling code
- Improve support for write failure simulation in null_blk
- Various lock ordering fixes
- Fixes for locking for debugfs attributes
- Various ublk related fixes and improvements
- Cleanups for blk-rq-qos wait handling
- blk-throttle fixes
- Fixes for loop dio and sync handling
- Fixes and cleanups for the auto-PI code
- Block side support for hardware encryption keys in blk-crypto
- Various cleanups and fixes
* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
nvme-tcp: fix selinux denied when calling sock_sendmsg
nvmet: pci-epf: Always configure BAR0 as 64-bit
nvmet: Remove duplicate uuid_copy
nvme: zns: Simplify nvme_zone_parse_entry()
nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
nvmet-fc: Remove unused functions
nvme-pci: remove stale comment
nvme-fc: Utilise min3() to simplify queue count calculation
nvme-multipath: Add visibility for queue-depth io-policy
nvme-multipath: Add visibility for numa io-policy
nvme-multipath: Add visibility for round-robin io-policy
nvmet: add tls_concat and tls_key debugfs entries
nvmet-tcp: support secure channel concatenation
nvmet: Add 'sq' argument to alloc_ctrl_args
nvme-fabrics: reset admin connection for secure concatenation
nvme-tcp: request secure channel concatenation
nvme-keyring: add nvme_tls_psk_refresh()
nvme: add nvme_auth_derive_tls_psk()
nvme: add nvme_auth_generate_digest()
...
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
Pull hardening updates from Kees Cook:
"As usual, it's scattered changes all over. Patches touching things
outside of our traditional areas in the tree have been Acked by
maintainers or were trivial changes:
- loadpin: remove unsupported MODULE_COMPRESS_NONE (Arulpandiyan
Vadivel)
- samples/check-exec: Fix script name (Mickaël Salaün)
- yama: remove needless locking in yama_task_prctl() (Oleg Nesterov)
- lib/string_choices: Sort by function name (R Sundar)
- hardening: Allow default HARDENED_USERCOPY to be set at compile
time (Mel Gorman)
- uaccess: Split out compile-time checks into ucopysize.h
- kbuild: clang: Support building UM with SUBARCH=i386
- x86: Enable i386 FORTIFY_SOURCE on Clang 16+
- ubsan/overflow: Rework integer overflow sanitizer option
- Add missing __nonstring annotations for callers of
memtostr*()/strtomem*()
- Add __must_be_noncstr() and have memtostr*()/strtomem*() check for
it
- Introduce __nonstring_array for silencing future GCC 15 warnings"
* tag 'hardening-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
compiler_types: Introduce __nonstring_array
hardening: Enable i386 FORTIFY_SOURCE on Clang 16+
x86/build: Remove -ffreestanding on i386 with GCC
ubsan/overflow: Enable ignorelist parsing and add type filter
ubsan/overflow: Enable pattern exclusions
ubsan/overflow: Rework integer overflow sanitizer option to turn on everything
samples/check-exec: Fix script name
yama: don't abuse rcu_read_lock/get_task_struct in yama_task_prctl()
kbuild: clang: Support building UM with SUBARCH=i386
loadpin: remove MODULE_COMPRESS_NONE as it is no longer supported
lib/string_choices: Rearrange functions in sorted order
string.h: Validate memtostr*()/strtomem*() arguments more carefully
compiler.h: Introduce __must_be_noncstr()
nilfs2: Mark on-disk strings as nonstring
uapi: stddef.h: Introduce __kernel_nonstring
x86/tdx: Mark message.bytes as nonstring
string: kunit: Mark nonstring test strings as __nonstring
scsi: qla2xxx: Mark device strings as nonstring
scsi: mpt3sas: Mark device strings as nonstring
scsi: mpi3mr: Mark device strings as nonstring
...
In the days when SCSI-2 was emerging, some drives did claim SCSI-2 but did
not correctly implement it. The st driver first tries MODE SELECT with the
page format bit set to set the block descriptor. If not successful, the
non-page format is tried.
The test only tests the sense code and this triggers also from illegal
parameter in the parameter list. The test is limited to "old" devices and
made more strict to remove false alarms.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250311112516.5548-4-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 32566a6f1a ("scsi: lpfc: Remove NLP_RELEASE_RPI flag from nodelist
structure") introduced a regression with SLI-3 adapters (e.g. LPe12000 8Gb)
where a Link Down / Link Up such as caused by disabling an host FC switch
port would result in the devices remaining in the transport-offline state
and multipath reporting them as failed. This problem was not seen with
newer SLI-4 adapters.
The problem was caused by portions of the patch which removed the functions
__lpfc_sli_rpi_release() and lpfc_sli_rpi_release() and all their callers.
This was presumably because with the removal of the NLP_RELEASE_RPI flag
there was no need to free the rpi.
However, __lpfc_sli_rpi_release() and lpfc_sli_rpi_release() which calls it
reset the NLP_UNREG_INP flag. And, lpfc_sli_def_mbox_cmpl() has a path
where __lpfc_sli_rpi_release() was called in a particular case where
NLP_UNREG_INP was not otherwise cleared because of other conditions.
Restoring the else clause of this conditional and simply clearing the
NLP_UNREG_INP flag appears to resolve the problem with SLI-3 adapters. It
should be noted that the code path in question is not specific to SLI-3,
but there are other SLI-4 code paths which may have masked the issue.
Fixes: 32566a6f1a ("scsi: lpfc: Remove NLP_RELEASE_RPI flag from nodelist structure")
Cc: stable@vger.kernel.org
Tested-by: Marco Patalano <mpatalan@redhat.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20250317163731.356873-1-emilne@redhat.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
At present, we determine the protocol through the cmd type, but other cmd
types, such as vendor-specific commands, default to the PIO protocol. This
strategy often causes the execution of different vendor-specific commands
to fail. In fact, for these commands, a better way is to use the protocol
configured by the command's tf to determine its protocol.
Fixes: 6f2ff1a131 ("hisi_sas: add v2 path to send ATA command")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20250220090011.313848-1-liyihang9@huawei.com
Reviewed-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
While here, convert some timeouts that are denominated in seconds
manually.
[mkp: Fix compilation error]
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-2-a43967e36c88@linux.microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It appears that a typo has made it into the newly added code
drivers/scsi/scsi_debug.c:3035:3: error: variable 'len' is uninitialized when used here [-Werror,-Wuninitialized]
3035 | len += resp_compression_m_pg(ap, pcontrol, target, devip->tape_dce);
| ^~~
Replace the '+=' with the intended '=' here.
Fixes: 568354b24c ("scsi: scsi_debug: Add compression mode page for tapes")
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225095651.2636811-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for memtostr*() checking that its source is marked as
nonstring, annotate the device strings accordingly.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for memtostr*() checking that its source is marked as
nonstring, annotate the device strings accordingly.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for memtostr*() checking that its source is marked as
nonstring, annotate the device strings accordingly.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Signed-off-by: Kees Cook <kees@kernel.org>
Function stop_qc_helper() is called while the debug_scsi_cmd lock is held,
and from here we may call cancel_work_sync(), which may sleep.
Sleeping in atomic sections is not allowed.
Hence change the cancel_work_sync() call into a cancel_work() call.
However now it is not possible to know if the work callback is running when
we return. This is relevant for eh_abort_handler handling, as the semantics
of that callback are that success means that we do not keep a reference to
the scsi_cmnd - now this is not possible. So return FAIL when we are unsure
if the callback still running.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
jpg: return FAILED from scsi_debug_abort() when possible callback running
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224115517.495899-5-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simplify command handling by moving struct sdebug_defer into the private
SCSI command data instead of allocating it separately. The only functional
change is that aborting a SCSI command now fails and is retried at a later
time if the completion handler can't be cancelled.
See also commit 1107c7b24e ("scsi: scsi_debug: Dynamically allocate
sdebug_queued_cmd").
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224115517.495899-4-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This structure is not used, so delete it.
It was originally intended for supporting checking for atomic writes
overlapping with ongoing reads and writes, but that support never got
added.
SBC-4 r22 section 4.29.3.2 "Performing operations during an atomic write
operation" describes two methods of handling overlapping atomic writes.
Currently the only method supported is for the ongoing read or write to
complete.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224115517.495899-2-john.g.garry@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Admin reply processing can be called from multiple contexts. The driver
uses an atomic flag for synchronization among multiple threads/context for
draining the admin replies.
Upon entering the admin processing routine, the driver will set the atomic
flag and start reply processing. When exiting the routine, the driver
resets the flag. However, there is a race condition when one thread (Thread
1) has processed replies and is about to reset the flag but in the meantime
few more replies are posted and another thread (Thread 2) is called to
process replies. Since the synchronization flag is still set, Thread 2 will
return without processing replies and those new replies will not be
flushed.
Make the watchdog thread monitor cases where admin ISR/poll call returns
due to another thread processing admin replies. If such an instance is
found, make driver call admin ISR to drain replies (if any).
Co-developed-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250220142528.20837-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kai Mäkisara <Kai.Makisara@kolumbus.fi> says:
Currently, the scsi_debug driver can create tape devices and the st
driver attaches to those. Nothing much can be done with the tape devices
because scsi_debug does not have support for the tape-specific commands
and features. These patches add some more tape support to the scsi_debug
driver. The end result is simulated drives with a tape having one or two
partitions (one partition is created initially).
The tape is implemented as fixed number (10 000) of 8-byte units.
The first four bytes of a unit contain the type of the unit (data
block, filemark or end-of-data mark). If the units is a data block,
the first four bytes also contain the block length and the remaining
four bytes the first bytes of written data. This allows the user
to use tags to see that the read block is what it was supposed to be.
The following SCSI operations are added or modified:
FORMAT MEDIUM
- added
LOCATE
- added
MODE SELECT
- modified to allow use without page(s) (just header and block descriptor)
- store density and block size
- partition page added
MODE SENSE
- modified to allow use without page(s) (just header and block descriptor)
- set density and block size
- partition page added
READ BLOCK LIMITS
- added
READ POSITION
- added
READ
- added tape support for READ (6)
REWIND
- modified to set the tape position
SPACE
- added
START STOP (LOAD)
- modified to return New Medium Unit Attention if tape loaded (not
according to the standard, but enables testing this UA)
WRITE
- added tape support for WRITE (6)
WRITE FILEMARKS
- added
Link: https://lore.kernel.org/r/20250213092636.2510-1-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
lpfc_next_online_cpu() opencodes cpumask_next_and_wrap() by using
a for-loop. Use it and make the lpfc_next_online_cpu() a plain
one-liner.
While there, rework lpfc_next_present_cpu() similarly. Notice that
cpumask_next() followed by cpumask_first() in the worst case of an
empty mask may traverse the mask twice. Cpumask_next_wrap() takes
care of that correctly.
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Calling cpumask_next_wrap_old() with starting CPU equal to wrapping CPU
is the same as request to find next CPU, wrapping around if needed.
cpumask_next_wrap() is the proper replacement for that.
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
