Commit Graph

4 Commits

Author SHA1 Message Date
Daniel Golle
e1bb4b36a7 dt-bindings: net: dsa: lantiq,gswip: add support for MaxLinear GSW1xx switches
Extend the Lantiq GSWIP device tree binding to also cover MaxLinear
GSW1xx switches which are based on the same hardware IP but connected
via MDIO instead of being memory-mapped.

Add compatible strings for MaxLinear GSW120, GSW125, GSW140, GSW141,
and GSW145 switches and adjust the schema to handle the different
connection methods with conditional properties.

Add MaxLinear GSW125 example showing MDIO-connected configuration.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/fc96f1dedb2b418a63e69960356dde7f6eb86424.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-06 14:16:17 -08:00
Daniel Golle
bea0c17786 dt-bindings: net: dsa: lantiq,gswip: add support for MII delay properties
Add support for standard tx-internal-delay-ps and rx-internal-delay-ps
properties on port nodes to allow fine-tuning of RGMII clock delays.

The GSWIP switch hardware supports delay values in 500 picosecond
increments from 0 to 3500 picoseconds, with a post-reset default of 2000
picoseconds for both TX and RX delays. The driver currently sets the
delay to 0 in case the PHY is setup to carry out the delay by the
corresponding interface modes ("rgmii-id", "rgmii-rxid", "rgmii-txid").

This corresponds to the driver changes that allow adjusting MII delays
using Device Tree properties instead of relying solely on the PHY
interface mode.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/9e007d4f85c2c6d69e0b91f3663d99e0f6fc8eac.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-06 14:16:17 -08:00
Daniel Golle
e836824116 dt-bindings: net: dsa: lantiq,gswip: add MaxLinear RMII refclk output property
Add support for the maxlinear,rmii-refclk-out boolean property on port
nodes to configure the RMII reference clock to be an output rather than
an input.

This property is only applicable for ports in RMII mode and allows the
switch to provide the reference clock for RMII-connected PHYs instead
of requiring an external clock source.

This corresponds to the driver changes that read this Device Tree
property to configure the RMII clock direction.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/9813bb916ecce9bae366e6c50c081014fe5371ea.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-06 14:16:16 -08:00
Martin Schiller
c7f7595421 dt-bindings: net: dsa: lantiq,gswip: convert to YAML schema
Convert the lantiq,gswip bindings to YAML format.

Also add this new file to the MAINTAINERS file.

Furthermore, the CPU port has to specify a phy-mode and either a phy or
a fixed-link. Since GSWIP is connected using a SoC internal protocol
there's no PHY involved. Add phy-mode = "internal" and a fixed-link to
the example code to describe the communication between the PMAC
(Ethernet controller) and GSWIP switch.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240611135434.3180973-2-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13 17:07:10 -07:00