(cherry picked from commit d99884ad9e in ath-next
as users are seeing this bug more now, also cc stable)
Running this test in a loop it is easy to reproduce an rtnl deadlock:
iw reg set FI
ifconfig wlan0 down
What happens is that thread A (workqueue) tries to update the regulatory:
try to acquire the rtnl_lock of ar->regd_update_work
rtnl_lock+0x17/0x20
ath11k_regd_update+0x15a/0x260 [ath11k]
ath11k_regd_update_work+0x15/0x20 [ath11k]
process_one_work+0x228/0x670
worker_thread+0x4d/0x440
kthread+0x16d/0x1b0
ret_from_fork+0x22/0x30
And thread B (ifconfig) tries to stop the interface:
try to cancel_work_sync(&ar->regd_update_work) in ath11k_mac_op_stop().
ifconfig 3109 [003] 2414.232506: probe:
ath11k_mac_op_stop: (ffffffffc14187a0)
drv_stop+0x30 ([mac80211])
ieee80211_do_stop+0x5d2 ([mac80211])
ieee80211_stop+0x3e ([mac80211])
__dev_close_many+0x9e ([kernel.kallsyms])
__dev_change_flags+0xbe ([kernel.kallsyms])
dev_change_flags+0x23 ([kernel.kallsyms])
devinet_ioctl+0x5e3 ([kernel.kallsyms])
inet_ioctl+0x197 ([kernel.kallsyms])
sock_do_ioctl+0x4d ([kernel.kallsyms])
sock_ioctl+0x264 ([kernel.kallsyms])
__x64_sys_ioctl+0x92 ([kernel.kallsyms])
do_syscall_64+0x3a ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe+0x63 ([kernel.kallsyms])
__GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so)
The sequence of deadlock is:
1. Thread B calls rtnl_lock().
2. Thread A starts to run and calls rtnl_lock() from within
ath11k_regd_update_work(), then enters wait state because the lock is owned by
thread B.
3. Thread B continues to run and tries to call
cancel_work_sync(&ar->regd_update_work), but thread A is in
ath11k_regd_update_work() waiting for rtnl_lock(). So cancel_work_sync()
forever waits for ath11k_regd_update_work() to finish and we have a deadlock.
Fix this by switching from using regulatory_set_wiphy_regd_sync() to
regulatory_set_wiphy_regd(). Now cfg80211 will schedule another workqueue which
handles the locking on it's own. So the ath11k workqueue can simply exit without
taking any locks, avoiding the deadlock.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Cc: <stable@vger.kernel.org>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
[kvalo: improve commit log]
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
The 2.7.0 series of QCN9074's firmware requests 5 segments
of memory instead of 3 (as in the 2.5.0 series).
The first segment (11M) is too large to be kalloc'd in one
go on x86 and requires piecemeal 1MB allocations, as was
the case with the prior public firmware (2.5.0, 15M).
Since f6f92968e1, ath11k will break the memory requests,
but only if there were fewer than 3 segments requested by
the firmware. It seems that 5 segments works fine and
allows QCN9074 to boot on x86 with firmware 2.7.0, so
change things accordingly.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16
Signed-off-by: Tyler J. Stachecki <stachecki.tyler@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221022042728.43015-1-stachecki.tyler@gmail.com
====================
pull-request: wireless-next-2022-10-28
First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7.
All mac80211 driver are now converted to use internal TX queues, this
might cause some regressions so we wanted to do this early in the
cycle.
Note: wireless tree was merged[1] to wireless-next to avoid some
conflicts with mac80211 patches between the trees. Unfortunately there
are still two smaller conflicts in net/mac80211/util.c which Stephen
also reported[2]. In the first conflict initialise scratch_len to
"params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and
in the second conflict take the version which uses elems->scratch_pos.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91
[2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/
mac80211
- preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues
- add API to show the link STAs in debugfs
- all mac80211 drivers are now using mac80211 internal TX queues (iTXQs)
rtw89
- support 8852BE
rtl8xxxu
- support RTL8188FU
brmfmac
- support two station interfaces concurrently
bcma
- support SPROM rev 11
====================
Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Variables hw_ctrl_s1 and sw_ctrl_s1 are not being initialized and
potentially can contain any garbage value. Currently there is an if
statement that sets one or the other of these variables, followed
by an if statement that checks if any of these variables have been
set to a non-zero value. In the case where they may contain
uninitialized non-zero values, the latter if statement may be
taken as true when it was not expected to.
Fix this by ensuring hw_ctrl_s1 and sw_ctrl_s1 are initialized.
Cleans up clang warning:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c:432:7: warning:
variable 'hw_ctrl_s1' is used uninitialized whenever 'if' condition is
false [-Wsometimes-uninitialized]
if (hw_ctrl) {
^~~~~~~
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c:440:7: note: uninitialized
use occurs here
if (hw_ctrl_s1 || sw_ctrl_s1) {
^~~~~~~~~~
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c:432:3: note: remove the 'if'
if its condition is always true
if (hw_ctrl) {
^~~~~~~~~~~~~
Fixes: c888183b21 ("wifi: rtl8xxxu: Support new chip RTL8188FU")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221020135709.1549086-1-colin.i.king@gmail.com
Fixes a warning that occurs when rc table support is enabled
(IEEE80211_HW_SUPPORTS_RC_TABLE) in mac80211_hwsim and the PS mode
is changed via the exported debugfs attribute.
When the PS mode is changed, a packet is broadcasted via
hwsim_send_nullfunc by creating and transmitting a plain skb with only
header initialized. The ieee80211 rate array in the control buffer is
zero-initialized. When ratetbl support is enabled, ieee80211_get_tx_rates
is called for the skb with sta parameter set to NULL and thus no
ratetbl can be used. The final rate array then looks like
[-1,0; 0,0; 0,0; 0,0] which causes the warning in ieee80211_get_tx_rate.
The issue is fixed by setting the count of the first rate with idx '0'
to 1 and hence ieee80211_get_tx_rates won't overwrite it with idx '-1'.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
DPK is short for digital pre-distortion calibration. It can adjusts digital
waveform according to PA linear characteristics dynamically to enhance
TX EVM.
Do this calibration when we are going to run on AP channel. To prevent
power offset out of boundary, it monitors thermal and set proper boundary
to register.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221014060237.29050-2-pkshih@realtek.com
TSSI is transmitter signal strength indication, which is a close-loop
hardware circuit to feedback actual transmitting power as a reference for
next transmission.
When we setup channel to connect an AP, it does full calibration. When
switching bands or channels, it needs to reset hardware status to prevent
use wrong feedback of previous transmission.
To do TX power compensation reflecting current temperature, it loads tables
of compensation values into registers according to channel and band group.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221012083234.20224-6-pkshih@realtek.com
IQ signal calibration is a very important calibration to yield good RF
performance. We do this calibration only if we are going to run on AP
channel. During scanning phase, without this calibration RF performance
is still acceptable because it transmits with low data rate at this phase.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221012083234.20224-5-pkshih@realtek.com
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, and wifi.
Current release - regressions:
- Revert "net/sched: taprio: make qdisc_leaf() see the
per-netdev-queue pfifo child qdiscs", it may cause crashes when the
qdisc is reconfigured
- inet: ping: fix splat due to packet allocation refactoring in inet
- tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF
due to races when per-netns hash table is used
Current release - new code bugs:
- eth: adin1110: check in netdev_event that netdev belongs to driver
- fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co.
Previous releases - regressions:
- ipv4: handle attempt to delete multipath route when fib_info
contains an nh reference, avoid oob access
- wifi: fix handful of bugs in the new Multi-BSSID code
- wifi: mt76: fix rate reporting / throughput regression on mt7915
and newer, fix checksum offload
- wifi: iwlwifi: mvm: fix double list_add at
iwl_mvm_mac_wake_tx_queue (other cases)
- wifi: mac80211: do not drop packets smaller than the LLC-SNAP
header on fast-rx
Previous releases - always broken:
- ieee802154: don't warn zero-sized raw_sendmsg()
- ipv6: ping: fix wrong checksum for large frames
- mctp: prevent double key removal and unref
- tcp/udp: fix memory leaks and races around IPV6_ADDRFORM
- hv_netvsc: fix race between VF offering and VF association message
Misc:
- remove -Warray-bounds silencing in the drivers, compilers fixed"
* tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
sunhme: fix an IS_ERR() vs NULL check in probe
net: marvell: prestera: fix a couple NULL vs IS_ERR() checks
kcm: avoid potential race in kcm_tx_work
tcp: Clean up kernel listener's reqsk in inet_twsk_purge()
net: phy: micrel: Fixes FIELD_GET assertion
openvswitch: add nf_ct_is_confirmed check before assigning the helper
tcp: Fix data races around icsk->icsk_af_ops.
ipv6: Fix data races around sk->sk_prot.
tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().
udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).
tcp/udp: Fix memory leak in ipv6_renew_options().
mctp: prevent double key removal and unref
selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1
netfilter: rpfilter/fib: Populate flowic_l3mdev field
selftests: netfilter: Test reverse path filtering
net/mlx5: Make ASO poll CQ usable in atomic context
tcp: cdg: allow tcp_cdg_release() to be called multiple times
inet: ping: fix recent breakage
ipv6: ping: fix wrong checksum for large frames
net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports
...
When we are going to do RF calibrations, they need BB helpers to control
TX PLCP, power, path and mode. Also, it they need helpers to backup and
restore some registers before and after RF calibrations. Then, use flow of
RF calibrations will be like backup registers, configure calibration,
configure TX parameters, measure calibration result, and finally restore
registers.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221009125403.19662-9-pkshih@realtek.com
We need power on function to enable hardware circuits of MAC/BB/RF, and
then download firmware and load PHY parameters. After more settings, it
starts to work. When it enters idle, use power off function to have the
lowest power consumption.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221009125403.19662-3-pkshih@realtek.com
This chip_ops is to assist set_channel, because we need setup and restore
hardware before and after set_channel.
Before set_channel, we stop transmitting, reset PPDU status, disable TSSI,
and disable ADC. After set_channel, do opposite things in reverse order.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221009125403.19662-2-pkshih@realtek.com
The wifi + bluetooth combo chips (RTL8723AU and RTL8723BU) read the
chip vendor from the wrong register because the val32 variable gets
overwritten. Add one more variable to avoid this.
This had no real effect on RTL8723BU. It may have had an effect on
RTL8723AU.
Fixes: 26f1fad29a ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/24af8024-2f07-552b-93d8-38823d8e3cb0@gmail.com
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value,
simply use the get_random_{u8,u16}() functions, which are faster than
wasting the additional bytes from a 32-bit value. This was done by hand,
identifying all of the places where one of the random integer functions
was used in a non-32-bit context.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:
@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)
@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@
- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)
@collapse_ret@
type T;
identifier VAR;
expression E;
@@
{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}
@drop_var@
type T;
identifier VAR;
@@
{
- T VAR;
... when != VAR
}
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Change active scan behavior to fit 6GHz requirements. There are many
different rules on active scan between 6GHz and 2GHz/5GHz, so if the
SSID is not specified, do fast passive scanning and limit number of
probe requests we send for now until new firmware can support all
rules.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221007045900.10823-1-pkshih@realtek.com
set_channel is main function to configure channel and bandwidth for all
layers, namely MAC, BB and RF. Additionally, MAC layer enables CCK rate
checking to avoid wrong rate from driver. BB layer configures SCO
(Sample Clock Offset) for CCK, TX gain error/offset, and reset baseband
hardware circuit after all configurations done.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221005083212.45683-7-pkshih@realtek.com
Linaro reported stringop-overread warnings in ath11k (this is one of many):
drivers/net/wireless/ath/ath11k/mac.c:2238:29: error: 'ath11k_peer_assoc_h_he_limit' reading 16 bytes from a region of size 0 [-Werror=stringop-overread]
My further investigation showed that these warnings happen on GCC 11.3 but not
with GCC 12.2, and with only the kernel config Linaro provided:
https://builds.tuxbuild.com/2F4W7nZHNx3T88RB0gaCZ9hBX6c/config
I saw the same warnings both with arm64 and x86_64 builds and KASAN seems to be
the reason triggering these warnings with GCC 11. Nobody else has reported
this so this seems to be quite rare corner case. I don't know what specific
commit started emitting this warning so I can't provide a Fixes tag. The
function hasn't been touched for a year.
I decided to workaround this by converting the pointer to a new array in stack,
and then copying the data to the new array. It's only 16 bytes anyway and this
is executed during association, so not in a hotpath.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/all/CA+G9fYsZ_qypa=jHY_dJ=tqX4515+qrV9n2SWXVDHve826nF7Q@mail.gmail.com/
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221010160638.20152-1-kvalo@kernel.org
BUGs like this are still reproducible:
[ 31.509616] list_add corruption. prev->next should be next (ffff8f8644242300), but was ffff8f86493fd300. (prev=ffff8f86493fd300).
[ 31.521544] ------------[ cut here ]------------
[ 31.526248] kernel BUG at lib/list_debug.c:30!
[ 31.530781] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 31.535831] CPU: 1 PID: 626 Comm: wpa_supplicant Not tainted 6.0.0+ #7
[ 31.542450] Hardware name: Dell Inc. Inspiron 660s/0478VN , BIOS A07 08/24/2012
[ 31.550484] RIP: 0010:__list_add_valid.cold+0x3a/0x5b
[ 31.555537] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 28 20 69 89 e8 4c e3 fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 d0 1f 69 89 e8 35 e3 fd ff <0f> 0b 4c 89 c1 48 c7 c7 78 1f 69 89 e8 24 e3 fd ff 0f 0b 48 c7 c7
[ 31.574605] RSP: 0018:ffff9f6f00dc3748 EFLAGS: 00010286
[ 31.579990] RAX: 0000000000000075 RBX: ffff8f8644242080 RCX: 0000000000000000
[ 31.587155] RDX: 0000000000000201 RSI: ffffffff8967862d RDI: 00000000ffffffff
[ 31.594482] RBP: ffff8f86493fd2e8 R08: 0000000000000000 R09: 00000000ffffdfff
[ 31.601735] R10: ffff9f6f00dc3608 R11: ffffffff89f46128 R12: ffff8f86493fd300
[ 31.608986] R13: ffff8f86493fd300 R14: ffff8f8644242300 R15: ffff8f8643dd3f2c
[ 31.616151] FS: 00007f3bb9a707c0(0000) GS:ffff8f865a300000(0000) knlGS:0000000000000000
[ 31.624447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 31.630286] CR2: 00007fe3647d5600 CR3: 00000001125a6002 CR4: 00000000000606e0
[ 31.637539] Call Trace:
[ 31.639936] <TASK>
[ 31.642143] iwl_mvm_mac_wake_tx_queue+0x71/0x90 [iwlmvm]
[ 31.647569] ieee80211_queue_skb+0x4b6/0x720 [mac80211]
...
So, it is necessary to extend the applied solution with commit 14a3aacf51
("iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue")
to all other cases where the station queues are invalidated and the related
lists are not emptied. Because, otherwise as before, if some new element is
added later to the list in iwl_mvm_mac_wake_tx_queue, it can match with the
old one and produce the same commented BUG.
That is, in order to avoid this problem completely, we must also remove the
related lists for the other cases when station queues are invalidated.
Fixes: cfbc6c4c5b ("iwlwifi: mvm: support mac80211 TXQs model")
Reported-by: Petr Stourac <pstourac@redhat.com>
Tested-by: Petr Stourac <pstourac@redhat.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221010081611.145027-1-jtornosm@redhat.com
Checking the relevant rxd bits for the checksum information only indicates
if the checksum verification was performed by the hardware and doesn't show
actual checksum errors. Checksum errors are indicated in the info field of
the DMA descriptor. Fix packets erroneously marked as CHECKSUM_UNNECESSARY
by checking the extra bits as well.
Those bits are only passed to the driver for MMIO devices at the moment, so
limit checksum offload to those.
Fixes: 2122dfbfd0 ("mt76: mt7615: add rx checksum offload support")
Fixes: 94244d2ea5 ("mt76: mt7915: add rx checksum offload support")
Fixes: 0e75732764 ("mt76: mt7921: enable rx csum offload")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221005130824.23371-2-nbd@nbd.name
When 802.3 decap offload is enabled, the hardware indicates header translation
failure, whenever either the LLC-SNAP header was not found, or a VLAN header
with an unregcognized tag is present.
In that case, the hardware inserts a 2-byte length fields after the MAC
addresses. For VLAN packets, this tag needs to be removed. However,
for 802.3 LLC packets, the length bytes should be preserved, since there
is no separate ethertype field in the data.
This fixes an issue where the length field was omitted for LLC frames, causing
them to be malformed after hardware decap.
Fixes: 1eeff0b4c1 ("mt76: mt7915: fix decap offload corner case with 4-addr VLAN frames")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221005130824.23371-1-nbd@nbd.name
