If connection preparation fails for MLO connections, then the
interface is completely reset to non-MLD. In this case, we must
not keep the station since it's related to the link of the vif
being removed. Delete an existing station. Any "new_sta" is
already being removed, so that doesn't need changes.
This fixes a use-after-free/double-free in debugfs if that's
enabled, because a vif going from MLD (and to MLD, but that's
not relevant here) recreates its entire debugfs.
Cc: stable@vger.kernel.org
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260505151533.c4e52deb06ad.Iafe56cec7de8512626169496b134bce3a6c17010@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, as noted in the comment, ieee80211_uhr_oper_size_ok()
will reject the element coming from the beacon, since it's too
short. However, this is incorrect in general, since the element
is extensible, and such extensions could be present in a beacon,
and then it might pass muster anyway.
Using the frame type we now have in the element parse result,
check that it's not coming from a beacon. The size was already
checked (according to frame type) during parsing.
Link: https://patch.msgid.link/20260428112708.41a7aacdda0c.I0d83c8c9cbee41fd2599480cad815b94867aa1f8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When considering both NPCA and DBE, it can appear that the
NPCA configuration is invalid, e.g. for an 80 MHz BSS channel
with DBE to 160 MHz:
| primary channel
| NPCA primary channel
| |
V V
| p | | n | | | | | |
| BSS channel |
| DBE channel |
Now the NPCA primary channel is in the same half as the primary
channel, and the NPCA puncturing bitmap could be completely
invalid as a puncturing bitmap when considering the overall
channel.
Split out the validity checks from cfg80211_chandef_valid() to
a new cfg80211_chandef_npca_valid() function that just checks
the NPCA configuration against the BSS chandef.
Link: https://patch.msgid.link/20260428112708.1225df131557.If3a6afadcce05d215b72fd82175f72373a0f6d24@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the device is capable, parse the AP chandef with NPCA.
Also advertise the other NPCA operational parameters to the
underlying driver and track if they change (though not with
BSS critical update etc. yet)
Since NPCA can only be enabled when the chanctx isn't shared,
the channel context code needs to clear/set npca.enabled in
the per-link configuration, except during association since
we can't enable NPCA before having completed association. In
this case, set npca.enabled during the association process.
Link: https://patch.msgid.link/20260428112708.eb1e42c0b6d7.I0acd8445d4600363afb8430922531450399d0fab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When two interfaces share a channel context, disable NPCA
unless both are AP interfaces that require NPCA. This way,
two AP interfaces can have identical chandefs set up and
share the channel context, but any non-APs cannot share a
chanctx with NPCA (they'd almost certainly have different
BSS color.)
This doesn't mean the chanctx cannot be shared but rather
that NPCA will be disabled on the shared channel context.
Link: https://patch.msgid.link/20260428112708.3832e15f4e78.I08a7c7f47d796f4d5d8f9a682c1fba37db2e4cf5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new wdev-only interface type NL80211_IFTYPE_PD to support
Proximity Detection (PD) operations such as PASN and peer measurement
operations. This interface type operates without a netdev, similar to
P2P_DEVICE and NAN interfaces.
Implement support across cfg80211 and mac80211 layers with PD-specific
checks gated by the NL80211_EXT_FEATURE_SECURE_RTT feature flag,
management frame registration and transmission capabilities, and proper
channel context handling where PD interfaces are excluded from bandwidth
calculations. Update mac80211 to recognize the new interface type in the
relevant paths for this management-only interface.
PD discovery can be performed on any available interface, such as
NL80211_IFTYPE_STATION.
If PD/PMSR uses the MAC address of an existing interface type, such as
NL80211_IFTYPE_STATION, then pairing and measurement shall use that
same interface. If PD/PMSR uses a different MAC address, such as a
random MAC address, then pairing and measurement can be performed on a
new NL80211_IFTYPE_PD interface created with that random MAC address.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-4-peddolla.reddy@oss.qualcomm.com
[fix comment style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the remain_on_channel operation does not support
filtering incoming frames by destination MAC address. This
prevents use cases such as PASN authentication in the
responder side that need to receive frames addressed to a
specific MAC during the off-channel period.
Add an rx_addr parameter to the remain_on_channel operation
callback and propagate it through the call chain from nl80211
to driver implementations. Introduce the extended feature
NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so
that cfg80211 rejects the request if the driver does not
advertise support for address filtering. Extract the address
from the NL80211_ATTR_MAC attribute when provided in the
netlink message and update the tracing infrastructure to
include the address in remain_on_channel trace events. The
rx_addr parameter is optional and can be NULL, maintaining
backward compatibility with existing drivers.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A NAN channel can be evacuated, i.e. detached from its chanctx, if all
chanctxs are used by NAN and a chanctx is needed for something else.
For example if the STA interface needs to perform a channel switch.
Implement the evacuation: detach the NAN channel from its chanctx, remove
all the peer NAN channels that were using this chanctx, and update the
driver.
Internally, the NAN channel evacuation will be triggered in the scenario
described above, and API is provided for the driver to also trigger it.
The driver/device is assumed to publish a ULW to notify the peers about
the fact that we won't be present on this NAN channel anymore.
Also export this as an API for the drivers: if a driver has other
resources per channel, it might want to trigger channel evacuation in
order to free up such internal resources for other usages.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.1e1dc40d2f3e.I003fe84dc6373bb9ad55abd7824b9fc21c51203f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, we store in nan.conf the cluster id that was configured from
upper layer to be used when the device opens a cluster.
But after we joined a cluster, the configured cluster id is no longer
relevant. Particularly, in reconfig we will give the driver the
(possibly) wrong cluster id.
Add an API to be called by the driver when joined a cluster
in which the cluster id will be updated.
Use the locally stored cluster id instead of cfg80211's copy.
Ignore cluster id updates from cfg80211 if we already have one
configured.
Adjust the drivers that use the cfg80211 API
(cfg80211_nan_cluster_joined) directly, otherwise we break functionality
(i.e. accept frame check won't evaluate to true).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.5dada1b756a4.I0f1060215267fd8aef31afd99f8f42e6fde7f234@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Populate the assoc_encrypted field in cfg80211_rx_assoc_resp_data
for mac80211-based drivers to indicate that the entire (re)association
exchange was encrypted.
When epp_peer is set, mac80211 enforces that unprotected
(Re)Association Request/Response frames are dropped. This ensures that
by the time the (Re)Association Response is processed, the entire
exchange was transmitted encrypted over the air.
Add support to populate assoc_encrypted based on epp_peer flag.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504123624.529218-3-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The HT check now only applies in strict mode since APs
were found to be broken. Mark it as such.
Fixes: 711a9c018a ("wifi: mac80211: skip ieee80211_verify_sta_ht_mcs_support check in non-strict mode")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jouni reported that certain sequences of tests caused some
WDS tests to fail after applying the upcoming hwsim changes
for NAN. I bisected that down to converting hwsim to TXQs,
and after a long debug session found that the 4-addr NDP was
getting dropped, because it goes out via a (management) TXQ
and is a data frame.
It's unclear to me now why this only happens in some test
sequences (e.g. "sigma_dut_sae_h2e_ap_loop ap_wds_sta" and
"sigma_dut_eap_ttls_all_akm_suites ap_wds_sta_open"), maybe
that affects timing and the frame is otherwise delayed in
some way.
Correct the check to only drop frames that actually carry
data, not NDPs.
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://patch.msgid.link/20260417141601.851ddf4adb59.I3d668c0e1bdca9cd98f2fc46f84a066e68cc7a62@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a (link) station connected to an AP interface is not
capable of EHT, it's possible that the AP interface is in
160 MHz but the HE channel is narrower, e.g. when EHT has
puncturing. In this case, the code doesn't correctly set
the STAs bandwidth, the station might be capable of using
160 MHz, but it can't use EHT 160 MHz with puncturing, so
it must be set to narrower.
Track the AP's 'he_and_lower_bw' bandwidth, use that when
calculating the maximum bandwidth to transmit to/from any
station not capable of EHT, and update all stations and
the chanctx min_def when it changes.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.d41efd67876c.I29ef615e6ab049a56c20f3226b5e953859f890b0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The per-STA bandwidth handling is completely confusing, given
the function names etc.
Move everything to sta_info.c and rename the functions to
accurately reflect what they return:
- ieee80211_sta_bw_capability()
- ieee80211_sta_current_bw() can return the appropriate
bandwidth in the desired direction (a new enum)
At any given time, the bandwidth with which we expect to receive
frames from a station may differ from the bandwidth with which
we may transmit frames to the station; this will happen either
during RX OMI negotiation, or for a long time if the station
used an HT Notify Channel Width frame. We also implement the
(VHT) Operating Mode Notification as an asymmetric setting, even
if the spec would seem to imply it could be symmetric.
Also rename the 'cur_max_bandwidth' value to 'op_mode_bw' which
matches the 'op_mode_nss', indicating more clearly what it _is_
rather than how it's _used_. It's not quite precise (NSS is)
since it's also HT chanwidth notification, but that seems OK.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.09ae71b74d5c.Ib59c2ac82e030559d1f7d462f06ba3488a090946@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The HT/VHT/HE/EHT/UHR operation can change, and might thus be
updated on each beacon update. Move them to the beacon struct
and parse them out of the beacon also on updates, not just on
starting the AP.
This also fixes checks in two ways:
- Regulatory checks in nl80211_validate_ap_phy_operation() are
now done also on updates, disallowing enabling HE/EHT/UHR on
channels that don't allow that after start. This checks only
operation now, but clients can't use it without operation.
- NL80211_ATTR_UHR_OPERATION is now required whenever UHR is
present in the beacon, and rejected otherwise.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.f70758a46904.I0d21120b41eed661eefc61d5417dadaae7145845@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the initial STA bandwidth is set during each
parsing of HT/VHT/... elements to the station capabilities,
multiple times, in a confusing way that's not very good in
the case of NAN stations either.
For now, keep the NULL chandef pointer and all that, but
clean up the initial handling of NSS/BW capabilities and
then apply the VHT operation mode on top of that. This
clarifies the code and the client code now also handles
the bandwidth change from Operating Mode Notification in
association response.
The HT code is completely unnecessary now, since the VHT
(soon to be renamed) function will be called and handles
HT as well.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.a4d88eb27a8d.Id7a316e75e7e3dce2023d987e6939060f5286378@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function is only called for at least HT capable stations,
so doesn't need to differentiate 20/20_NOHT. Also, the check
for VHT 160 MHz support is wrong, since a station could have
support for both and the AP is using 80+80, but nothing cares
anyway, so we don't need that.
Simplify the function and move it to util.c since it now no
longer is related to VHT, and also doesn't need a station.
Also use the new function in ieee80211_get_sta_bw() for the
chandef calculations, it just needs to handle the 20/20-noht
separately; while at it fix that to handle HE stations.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.7b0be1059436.I573add4e3ed68b15f8b45122d053ac523afe4025@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the final version of 802.11be-2024, Transition Delay and Padding
Delay subfield are for both EMLSR and EMLMR. Depending if the mode is
EMLSR or EMLMR, the interpretation of the encoded value might change.
Define all the constants and helpers to interpret delay subfields both
in EMLSR and EMLMR mode.
Signed-off-by: Pablo Martin-Gomez <pmartin-gomez@freebox.fr>
Link: https://patch.msgid.link/20260410170429.343617-4-pmartin-gomez@freebox.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but
its per-invocation rx_result is declared static. Concurrent callers then
share one instance and can overwrite each other's result between
ieee80211_rx_mesh_data() and the switch on res.
That can make a packet that was queued or consumed by
ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make
a packet that should continue return as queued.
Make res an automatic variable so each invocation keeps its own result.
Fixes: 3468e1e0c6 ("wifi: mac80211: add mesh fast-rx support")
Cc: stable@vger.kernel.org
Signed-off-by: Catherine <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260424131435.83212-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
