The RTL8159 (RTL_VER_17) requires firmware for its PHY in order to work
at connection speeds > 5GBit. Add support for uploading firmware for
the PHY using the existing rtl8152_apply_firmware() function
in r8157_hw_phy_cfg() and set up the correct names for the firmware
files.
This also adds support for uploading firmware for the RTL8157
(RTL_VER_16) PHY, for which firmware is however not strictly necessary
to work. Still, this allows to upload newer versions of the firmware used
by this chip, e.g. to improve interoperability.
If no firmware is found, both the RTL8157 and the RTL8159 will continue
to work.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20260505-rtl8159_net_next-v4-3-1a648a9c4d8d@birger-koblitz.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RTL8159 re-uses the packet descriptor format introduced with the
RTL8157 and other hardware features of the RTL8157 (RTL_VER_16) such
as the SRAM access. The support therefore consists in expanding the
existing RTL8157 code for initialization and USB power management
to also be used for the RTL8159 (RTL_VER_17).
Most of the additional code is added in r8157_hw_phy_cfg() to configure
the RTL8159 PHY.
Add support for the USB device ID of Realtek RTL8159-based adapters,
for which the product ID is 0x815a. Detect the RTL8159 as RTL_VER_17
and set it up.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20260505-rtl8159_net_next-v4-2-1a648a9c4d8d@birger-koblitz.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit e0bffe3e68 ("net: asix: ax88772: migrate to phylink") replaced
the asix_adjust_link() PHY callback with phylink's mac_link_up() and
mac_link_down() handlers, but did not carry over the usbnet_link_change()
notification that commit 805206e66f ("net: asix: fix "can't send until
first packet is send" issue") had added.
As a result, the original symptom returns: when the link comes up,
usbnet is never notified, so the RX URB submission stays dormant until
some other event (e.g. a transmitted packet triggering the status
endpoint interrupt) wakes it up.
This is reproducible with the Apple A1277 USB Ethernet Adapter
(05ac:1402, AX88772A based) on a Banana Pro using a static IPv4
configuration. After bringing the interface up, no incoming packets are
received until the first outgoing frame triggers usbnet's RX path.
Restore the link change notification, gated on a carrier transition so
the call remains idempotent if the status endpoint also reports the
change later.
Fixes: e0bffe3e68 ("net: asix: ax88772: migrate to phylink")
Signed-off-by: Markus Baier <Markus.Baier@soslab.tu-darmstadt.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260501163941.107668-1-Markus.Baier@soslab.tu-darmstadt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Apple Silicon Macs expose two CDC NCM "private" data interfaces over
USB-C with VID:PID 0x05ac:0x1905 and product string "Mac". This is the
same protocol Apple already ships on iPhone (0x05ac:0x12a8) and iPad
(0x05ac:0x12ab) for RemoteXPC since iOS 17 -- both data interfaces lack
an interrupt status endpoint, so they rely on the FLAG_LINK_INTR-
conditional bind path introduced in commit 3ec8d7572a ("CDC-NCM: add
support for Apple's private interface").
The id_table currently has entries for iPhone and iPad but not for the
Mac. Without a match, cdc_ncm falls through to the generic CDC NCM
class-match entry, which uses the FLAG_LINK_INTR-having cdc_ncm_info
struct, so bind_common() fails on the missing status endpoint and no
netdev appears.
Add id_table entries for both interface numbers (0 and 2) of the Mac,
bound to the existing apple_private_interface_info driver_info.
Verified empirically on a Mac Studio M3 Ultra running macOS 26.5: when
a Mac is connected via USB-C, ioreg shows VID 0x05ac, PID 0x1905,
product string "Mac", with two NCM data interfaces at numbers 0 and 2.
The same PID is presented by all current Apple Silicon Mac models
(MacBook Pro/Air, Mac mini, Mac Studio across the M-series), mirroring
Apple's single-PID-per-family pattern from iPhone/iPad.
After this patch, plugging a Mac into a Linux host running the patched
kernel produces two enx... interfaces (one per data interface),
"ip -br link" lists them as UP, and standard userspace networking
(DHCP, NetworkManager shared mode, etc.) works without any modprobe
overrides or out-of-tree modules.
Signed-off-by: Alex Cheema <alex@exolabs.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429175739.34426-1-alex@exolabs.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace explicit testing of bits and clearing these bits by existing
functions ocp_word_test_and_clr_bits() and r8152_mdio_test_and_clr_bit()
to re-use this code.
This allows to remove the "ocp_data" variable. Also remove the "ret" variable
which was incorrectly used for the r8153_phy_status() return value which
is a u16, so that the remaining "data" variable is sufficient.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260428-use_bit_functions-v1-1-6eb5a3507610@birger-koblitz.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When rtl8150_start_xmit() fails to submit the tx URB, the URB is never
handed to the USB core and write_bulk_callback() will not run. The
driver returns NETDEV_TX_OK, which tells the networking stack that the
skb has been consumed, but nothing actually frees the skb on this
error path:
dev->tx_skb = skb;
...
if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
...
/* no kfree_skb here */
}
return NETDEV_TX_OK;
This leaks the skb on every submit failure and also leaves dev->tx_skb
pointing at memory that the driver itself may later free, which is
fragile.
Free the skb with dev_kfree_skb_any() in the error path and clear
dev->tx_skb so no stale pointer is left behind.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Morduan Zang <zhangdandan@uniontech.com>
Link: https://patch.msgid.link/E7D3E1C013C5A859+20260424015517.9574-1-zhangdandan@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit()
when accessing skb->len for tx statistics after usb_submit_urb() has
been called:
BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760
drivers/net/usb/rtl8150.c:712
Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226
The URB completion handler write_bulk_callback() frees the skb via
dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU
in softirq context before usb_submit_urb() returns in the submitter,
so by the time the submitter reads skb->len the skb has already been
queued to the per-CPU completion_queue and freed by net_tx_action():
CPU A (xmit) CPU B (USB completion softirq)
------------ ------------------------------
dev->tx_skb = skb;
usb_submit_urb() --+
|-------> write_bulk_callback()
| dev_kfree_skb_irq(dev->tx_skb)
| net_tx_action()
| napi_skb_cache_put() <-- free
netdev->stats.tx_bytes |
+= skb->len; <-- UAF read
Fix it by caching skb->len before submitting the URB and using the
cached value when updating the tx_bytes counter.
The pre-existing tx_bytes semantics are preserved: the counter tracks
the original frame length (skb->len), not the ETH_ZLEN/USB-alignment
padded "count" value that is handed to the device. Changing that
would be a user-visible accounting change and is out of scope for
this UAF fix.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+3f46c095ac0ca048cb71@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69e69ee7.050a0220.24bfd3.002b.GAE@google.com/
Closes: https://syzkaller.appspot.com/bug?extid=3f46c095ac0ca048cb71
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Zhan Jun <zhanjun@uniontech.com>
Link: https://patch.msgid.link/809895186B866C10+20260423004913.136655-1-zhangdandan@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge in late fixes in preparation for the net-next PR.
Conflicts:
include/net/sch_generic.h
a6bd339dbb ("net_sched: fix skb memory leak in deferred qdisc drops")
ff2998f29f ("net: sched: introduce qdisc-specific drop reason tracing")
https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk
drivers/net/ethernet/airoha/airoha_eth.c
1acdfbdb51 ("net: airoha: Fix VIP configuration for AN7583 SoC")
bf3471e6e6 ("net: airoha: Make flow control source port mapping dependent on nbq parameter")
Adjacent changes:
drivers/net/ethernet/airoha/airoha_ppe.c
f44218cd5e ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()")
7da62262ec ("inet: add ip_local_port_step_width sysctl to improve port usage distribution")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RTL8157 uses a different packet descriptor format compared to the
previous generation of chips. Add support for this format by adding a
descriptor format structure into the r8152 structure and corresponding
desc_ops functions which abstract the vlan-tag, tx/rx len and
tx/rx checksum algorithms.
Also, add support for the ADV indirect access interface of the RTL8157
and PHY setup.
For initialization of the RTL8157, combine the existing RTL8156B and
RTL8156 init functions and add RTL8157-specific functinality in order
to improve code readability and maintainability.
r8156_init() is now called with RTL_VER_10 and RTL_VER_11 for the RTL8156,
with RTL_VER_12, RTL_VER_13 and RTL_VER_15 for the RTL8156B and with
RTL_VER_16 for the RTL8157 and checks the version for chip-specific code.
Also add USB power control functions for the RTL8157.
Add support for the USB device ID of Realtek RTL8157-based adapters. Detect
the RTL8157 as RTL_VER_16 and set it up.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260404-rtl8157_next-v7-2-039121318f23@birger-koblitz.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the following bitwise operation functions for PHY OCP registers to
simplify the code.
- ocp_reg_w0w1()
- ocp_reg_clr_bits()
- ocp_reg_set_bits()
- sram_write_w0w1()
- sram_clr_bits()
- sram_set_bits()
- r8152_mdio_clr_bit()
- r8152_mdio_set_bit()
- r8152_mdio_test_and_clr_bit()
In addition, remove variable set but not used from r8153_init(),
r8153b_init() and r8153c_init().
Signed-off-by: Chih Kai Hsu <hsu.chih.kai@realtek.com>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://patch.msgid.link/20260326073925.32976-456-nic_swsd@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot reports "task hung in rpm_resume"
This is caused by aqc111_suspend calling
the PM variant of its write_cmd routine.
The simplified call trace looks like this:
rpm_suspend()
usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING
aqc111_suspend() - called for the usb device interface
aqc111_write32_cmd()
usb_autopm_get_interface()
pm_runtime_resume_and_get()
rpm_resume() - here we call rpm_resume() on our parent
rpm_resume() - Here we wait for a status change that will never happen.
At this point we block another task which holds
rtnl_lock and locks up the whole networking stack.
Fix this by replacing the write_cmd calls with their _nopm variants
Reported-by: syzbot+48dc1e8dfc92faf1124c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48dc1e8dfc92faf1124c
Fixes: e58ba4544c ("net: usb: aqc111: Add support for wake on LAN by MAGIC packet")
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Link: https://patch.msgid.link/20260313141643.1181386-1-zlatistiv@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The same bounds-check bug fixed for NDP16 in the previous patch also
exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated
against the total skb length without accounting for ndpoffset, allowing
out-of-bounds reads when the NDP32 is placed near the end of the NTB.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Compile-tested only.
Fixes: 0fa81b304a ("cdc_ncm: Implement the 32-bit version of NCM Transfer Block")
Signed-off-by: Tobi Gaertner <tob.gaertner@me.com>
Link: https://patch.msgid.link/20260314054640.2895026-3-tob.gaertner@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Fixes: ff06ab13a4 ("net: cdc_ncm: splitting rx_fixup for code reuse")
Signed-off-by: Tobi Gaertner <tob.gaertner@me.com>
Link: https://patch.msgid.link/20260314054640.2895026-2-tob.gaertner@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not configure Latency Tolerance Messaging (LTM) on USB 2.0 hardware.
The LAN7850 is a High-Speed (USB 2.0) only device and does not support
SuperSpeed features like LTM. Currently, the driver unconditionally
attempts to configure LTM registers during initialization. On the
LAN7850, these registers do not exist, resulting in writes to invalid
or undocumented memory space.
This issue was identified during a port to the regmap API with strict
register validation enabled. While no functional issues or crashes have
been observed from these invalid writes, bypassing LTM initialization
on the LAN7850 ensures the driver strictly adheres to the hardware's
valid register map.
Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260305143429.530909-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Account for hardware auto-padding in TX byte counters to reflect actual
wire traffic.
The LAN7850 hardware automatically pads undersized frames to the minimum
Ethernet frame length (ETH_ZLEN, 60 bytes). However, the driver tracks
the network statistics based on the unpadded socket buffer length. This
results in the tx_bytes counter under-reporting the actual physical
bytes placed on the Ethernet wire for small packets (like short ARP or
ICMP requests).
Use max_t() to ensure the transmission statistics accurately account for
the hardware-generated padding.
Fixes: d383216a7e ("lan78xx: Introduce Tx URB processing improvements")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260305143429.530909-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not drop packets with checksum errors at the USB driver level;
pass them to the network stack.
Previously, the driver dropped all packets where the 'Receive Error
Detected' (RED) bit was set, regardless of the specific error type. This
caused packets with only IP or TCP/UDP checksum errors to be dropped
before reaching the kernel, preventing the network stack from accounting
for them or performing software fallback.
Add a mask for hard hardware errors to safely drop genuinely corrupt
frames, while allowing checksum-errored frames to pass with their
ip_summed field explicitly set to CHECKSUM_NONE.
Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260305143429.530909-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305105006.16415-1-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit c7159e960f ("usbnet: limit max_mtu based on device's hard_mtu")
capped net->max_mtu to the device's hard_mtu in usbnet_probe(). While
this correctly prevents oversized packets on standard USB network
devices, it breaks the qmi_wwan driver.
qmi_wwan relies on userspace (e.g. ModemManager) setting a large MTU on
the wwan0 interface to configure rx_urb_size via usbnet_change_mtu().
QMI modems negotiate USB transfer sizes of 16,383 or 32,767 bytes, and
the USB receive buffers must be sized accordingly. With max_mtu capped
to hard_mtu (~1500 bytes), userspace can no longer raise the MTU, the
receive buffers remain small, and download speeds drop from >300 Mbps
to ~0.8 Mbps.
Introduce a FLAG_NOMAXMTU driver flag that allows individual usbnet
drivers to opt out of the max_mtu cap. Set this flag in qmi_wwan's
driver_info structures to restore the previous behavior for QMI devices,
while keeping the safety fix in place for all other usbnet drivers.
Fixes: c7159e960f ("usbnet: limit max_mtu based on device's hard_mtu")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/CAPh3n803k8JcBPV5qEzUB-oKzWkAs-D5CU7z=Vd_nLRCr5ZqQg@mail.gmail.com/
Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Tested-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://patch.msgid.link/20260304134338.1785002-1-lvivier@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-7.0-rc3).
No conflicts.
Adjacent changes:
net/netfilter/nft_set_rbtree.c
fb7fb40163 ("netfilter: nf_tables: clone set on flush only")
3aea466a43 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The r8152 driver supports the RTL8156, which is a 2.5Gbit Ethernet controller for
USB 3.0, for which support is added for configuring and displaying the EEE
advertisement status for 2.5GBit connections.
The patch also corrects the determination of whether EEE is active to include
the 2.5GBit connection status and make the determination dependent not on the
desired speed configuration (tp->speed), but on the actual speed used by
the controller. For consistency, this is corrected also for the RTL8152/3.
This was tested on an Edimax EU-4307 V1.0 USB-Ethernet adapter with RTL8156,
and a SECOMP Value 12.99.1115 USB-C 3.1 Ethernet converter with RTL8153.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260224-b4-eee2g5-v2-1-cf5c83df036e@birger-koblitz.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: d40261236e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730")
Link: https://patch.msgid.link/2026022326-shack-headstone-ef6f@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pegasus_probe() fills URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_rcvbulkpipe(dev, 1) for RX data
- usb_sndbulkpipe(dev, 2) for TX data
- usb_rcvintpipe(dev, 3) for status interrupts
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a pegasus_usb_ep enum for endpoint numbers, replacing magic
constants throughout. Add usb_check_bulk_endpoints() and
usb_check_int_endpoints() calls before any resource allocation to
verify endpoint types before use, rejecting devices with mismatched
descriptors at probe time, and avoid triggering assertion.
Similar fix to
- commit 90b7f29617 ("net: usb: rtl8150: enable basic endpoint checking")
- commit 9e7021d2ae ("net: usb: catc: enable basic endpoint checking")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260222050633.410165-1-n7l8m4@u.northwestern.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The LAN7801 is designed exclusively for external PHYs (unlike the
LAN7800/LAN7850 which have internal PHYs), but lan78xx_mdio_init()
restricts PHY scanning to MDIO addresses 0-7 by setting phy_mask to
~(0xFF). This prevents discovery of external PHYs wired to addresses
outside that range.
One such case is the DP83TC814 100BASE-T1 PHY, which is typically
configured at MDIO address 10 via PHYAD bootstrap pins and goes
undetected with the current mask.
Remove the restrictive phy_mask assignment for the LAN7801 so that the
default mask of 0 applies, allowing all 32 MDIO addresses to be
scanned during bus registration.
Fixes: 02dc1f3d61 ("lan78xx: add LAN7801 MAC only support")
Signed-off-by: Martin Pålsson <martin@poleshift.se>
Link: https://patch.msgid.link/0110019c6f388aff-98d99cf0-4425-4fff-b16b-dea5ad8fafe0-000000@eu-north-1.amazonses.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls
netif_stop_queue() and netif_wake_queue(). These are TX queue flow
control functions unrelated to RX multicast configuration.
The premature netif_wake_queue() can re-enable TX while tx_urb is still
in-flight, leading to a double usb_submit_urb() on the same URB:
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb);
}
kaweth_set_rx_mode() {
netif_stop_queue();
netif_wake_queue(); // wakes TX queue before URB is done
}
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb); // URB submitted while active
}
This triggers the WARN in usb_submit_urb():
"URB submitted while active"
This is a similar class of bug fixed in rtl8150 by
- commit 958baf5eae ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast").
Also kaweth_set_rx_mode() is already functionally broken, the
real set_rx_mode action is performed by kaweth_async_set_rx_mode(),
which in turn is not a no-op only at ndo_open() time.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260217175012.1234494-1-n7l8m4@u.northwestern.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
catc_probe() fills three URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX
- usb_rcvintpipe(usbdev, 2) for interrupt status
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a catc_usb_ep enum for endpoint numbers, replacing magic constants
throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints()
calls after usb_set_interface() to verify endpoint types before use,
rejecting devices with mismatched descriptors at probe time.
Similar to
- commit 90b7f29617 ("net: usb: rtl8150: enable basic endpoint checking")
which fixed the issue in rtl8150.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260212214154.3609844-1-n7l8m4@u.northwestern.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
