Jeff Johnson says:
==================
ath.git patches for v7.2 (PR #1)
For ath9k:
- improve the GPIO interface.
For ath12k:
- replace dynamic memory allocation in WMI rx path
- avoid buffer overread when configuring IRQs
- code housekeeping
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull gpio fixes from Bartosz Golaszewski:
- fix a regression in gpio-rockchip introduced on older chips during
the merge window when converting to dynamic GPIO base
- fix AST2700 debounce selector bit definitions in gpio-aspeed
* tag 'gpio-fixes-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: aspeed: fix AST2700 debounce selector bit definitions
gpio: rockchip: Fix GPIO regression after conversion to dynamic base allocation
The ath9k has an odd use of system-wide GPIOs: if the chip
does not have internal GPIO capability, it will try to obtain a
GPIO line from the system GPIO controller:
if (BIT(gpio) & ah->caps.gpio_mask)
ath9k_hw_gpio_cfg_wmac(...);
else if (AR_SREV_SOC(ah))
ath9k_hw_gpio_cfg_soc(ah, gpio, out, label);
Where ath9k_hw_gpio_cfg_soc() will attempt to issue
gpio_request_one() passing the local GPIO number of the controller
(0..31) to gpio_request_one().
This is somewhat peculiar and possibly even dangerous: there is
nowadays no guarantee of the numbering of these system-wide
GPIOs, and assuming that GPIO 0..31 as used by ath9k would
correspond to GPIOs 0..31 on the system as a whole seems a bit
wild.
Register all 32 GPIOs at index 0..31 directly in the ATH79K
GPIO driver and associate with the NULL device (making them
widely available) if and only if we are probing ATH79K wifi
from the AHB bus (used for SoCs). We obtain these offsets from
the NULL device if necessary.
These GPIOs should ideally be defined in the device tree
instead, but we have no control over that for the legacy
code path.
Testcompiled with the ath79 defconfig.
Reported-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Tested-by: Michał Kępień <kernel@kempniu.pl>
Link: https://patch.msgid.link/20260317-descriptors-wireless-v6-1-b19ecff9cd2b@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The AST2700 datasheet defines reg_debounce_sel1 as the low bit and
reg_debounce_sel2 as the high bit. The current driver uses the AST2600
mapping instead, where sel1 is the high bit and sel2 is the low bit.
As a result, the debounce selector bits are programmed in reverse on
AST2700. Swap the G7 sel1/sel2 bit definitions so the driver matches the
hardware definition.
Fixes: b2e861bd1e ("gpio: aspeed: Support G7 Aspeed gpio controller")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://patch.msgid.link/20260415-gpio-fix-v1-1-b08a89b31e6f@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The commit c8079f83e0 ("gpio: rockchip: convert to dynamic GPIO base
allocation") broke GPIO on devices using device trees which don't set
the gpio-ranges property, something only Rockchip RK35xx SoC DTs do.
On a Rockchip RK3399 device something like following is now observed:
[ 0.082771] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000
[ 0.083531] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000
[ 0.084110] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000
[ 0.084746] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000
[ 0.085389] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000
--
[ 0.212208] rockchip-pinctrl pinctrl: pin 637 is not registered so it cannot be requested
[ 0.212271] rockchip-pinctrl pinctrl: error -EINVAL: pin-637 (gpio3:637)
[ 0.212344] leds-gpio leds: error -EINVAL: Failed to get GPIO '/leds/led-0'
[ 0.212389] leds-gpio leds: probe with driver leds-gpio failed with error -22
--
[ 0.607545] rockchip-pinctrl pinctrl: pin 519 is not registered so it cannot be requested
[ 0.608775] rockchip-pinctrl pinctrl: error -EINVAL: pin-519 (gpio0:519)
[ 0.610003] dwmmc_rockchip fe320000.mmc: probe with driver dwmmc_rockchip failed with error -22
--
[ 0.805882] rockchip-pinctrl pinctrl: pin 547 is not registered so it cannot be requested
[ 0.806672] rockchip-pinctrl pinctrl: error -EINVAL: pin-547 (gpio1:547)
[ 0.807301] reg-fixed-voltage regulator-vbus-typec: error -EINVAL: can't get GPIO
[ 0.807307] rockchip-pinctrl pinctrl: pin 602 is not registered so it cannot be requested
[ 0.807970] reg-fixed-voltage regulator-vbus-typec: probe with driver reg-fixed-voltage failed with error -22
[ 0.808692] rockchip-pinctrl pinctrl: error -EINVAL: pin-602 (gpio2:602)
[ 0.810279] reg-fixed-voltage regulator-vcc3v3-pcie: error -EINVAL: can't get GPIO
[ 0.810284] rockchip-pinctrl pinctrl: pin 665 is not registered so it cannot be requested
[ 0.810299] rockchip-pinctrl pinctrl: error -EINVAL: pin-665 (gpio4:665)
[ 0.810960] reg-fixed-voltage regulator-vcc3v3-pcie: probe with driver reg-fixed-voltage failed with error -22
[ 0.811679] reg-fixed-voltage regulator-vcc5v0-host: error -EINVAL: can't get GPIO
[ 0.813943] reg-fixed-voltage regulator-vcc5v0-host: probe with driver reg-fixed-voltage failed with error -22
--
[ 0.867788] rockchip-pinctrl pinctrl: pin 522 is not registered so it cannot be requested
[ 0.868537] rockchip-pinctrl pinctrl: error -EINVAL: pin-522 (gpio0:522)
[ 0.869166] pwrseq_simple sdio-pwrseq: error -EINVAL: reset GPIOs not ready
[ 0.869798] pwrseq_simple sdio-pwrseq: probe with driver pwrseq_simple failed with error -22
--
[ 0.940365] rockchip-pinctrl pinctrl: pin 623 is not registered so it cannot be requested
[ 0.941084] rockchip-pinctrl pinctrl: error -EINVAL: pin-623 (gpio3:623)
[ 0.941823] rk_gmac-dwmac fe300000.ethernet: error -EINVAL: Cannot register the MDIO bus
[ 0.942542] rk_gmac-dwmac fe300000.ethernet: error -EINVAL: MDIO bus (id: 0) registration failed
[ 0.943772] rk_gmac-dwmac fe300000.ethernet: probe with driver rk_gmac-dwmac failed with error -22
Restore GPIO to a working state on devices using older Rockchip SoCs
and/or DTs not having the gpio-ranges property set by restoring prior
use of bank->pin_base as the pin_offset value.
Also change to use bank->nr_pins as the npins value to align and prevent
a possible future breakage if gc->ngpio is ever changed to match the 32
GPIOs each controller theoretically can handle.
Fixes: c8079f83e0 ("gpio: rockchip: convert to dynamic GPIO base allocation")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260416154928.2103388-1-jonas@kwiboo.se
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Pull pin control updates from Linus Walleij:
"Core changes:
- Perform basic checks on pin config properties so as not to allow
directly contradictory settings such as setting a pin to more than
one bias or drive mode
- Handle input-threshold-voltage-microvolt property
- Introduce pinctrl_gpio_get_config() handling in the core for SCMI
GPIO using pin control
New drivers:
- GPIO-by-pin control driver (also appearing in the GPIO pull
request) fulfilling a promise on a comment from Grant Likely many
years ago: "can't GPIO just be a front-end for pin control?" it
turns out it can, if and only if you design something new from
scratch, such as SCMI
- Broadcom BCM7038 as a pinctrl-single delegate
- Mobileye EyeQ6Lplus OLB pin controller
- Qualcomm Eliza and Hawi families TLMM pin controllers
- Qualcomm SDM670 and Milos family LPASS LPI pin controllers
- Qualcomm IPQ5210 pin controller
- Realtek RTD1625 pin controller support
- Rockchip RV1103B pin controller support
- Texas Instruments AM62L as a pinctrl-single delegate
Improvements:
- Set config implementation for the Spacemit K1 pin controller"
* tag 'pinctrl-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (84 commits)
pinctrl: qcom: Add Hawi pinctrl driver
dt-bindings: pinctrl: qcom: Describe Hawi TLMM block
dt-bindings: pinctrl: pinctrl-max77620: convert to DT schema
pinctrl: single: Add bcm7038-padconf compatible matching
dt-bindings: pinctrl: pinctrl-single: Add brcm,bcm7038-padconf
dt-bindings: pinctrl: apple,pinctrl: Add t8122 compatible
pinctrl: qcom: sdm670-lpass-lpi: label variables as static
pinctrl: sophgo: pinctrl-sg2044: Fix wrong module description
pinctrl: sophgo: pinctrl-sg2042: Fix wrong module description
pinctrl: qcom: add sdm670 lpi tlmm
dt-bindings: pinctrl: qcom: Add SDM670 LPASS LPI pinctrl
dt-bindings: qcom: lpass-lpi-common: add reserved GPIOs property
pinctrl: qcom: Introduce IPQ5210 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5210 pinctrl
pinctrl: qcom: Drop redundant intr_target_reg on modern SoCs
pinctrl: qcom: eliza: Fix interrupt target bit
pinctrl: core: Don't use "proxy" headers
pinctrl: amd: Support new ACPI ID AMDI0033
pinctrl: renesas: rzg2l: Drop superfluous blank line
pinctrl: renesas: rzg2l: Fix save/restore of {IOLH,IEN,PUPD,SMT} registers
...
Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
Pull media updates from Mauro Carvalho Chehab:
- new CSI tegra support, covering Tegra20 and Tegra30
- new camera sensor drivers: T4ka3 and ov2732
- m88ds3103: add 3103c chip support
- uvcvideo: add support for Intel RealSense D436/D555 and P010 pixel format
- synopsys csi2rx: add i.MX93 support
- imx8-isi: add i.MX95 support
- imx8mq-mipi-csi2: add i.MX8ULP support
- dw100: add V4L2 requests support
- support for DTV devices from Hauppauge got some improvements
- media staging: dropped starfive-camss driver
- media docs: document multi-committers model and improve maint profile
- media core:
- add v4l2_subdev_get_frame_desc_passthrough() helper
- improve error handling in fwnode parsing
- lots of driver fixes, cleanups and improvements
* tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (251 commits)
Revert "media: cx231xx: add USB ID 2040:8360 for Hauppauge WinTV-HVR-935"
media: synopsys: csi2rx: add i.MX93 support
media: dt-bindings: add NXP i.MX93 compatible string
media: synopsys: csi2rx: Use enum and u32 array for register offsets
media: synopsys: csi2rx: implement .get_frame_desc() callback
media: synopsys: csi2rx: only check errors from devm_clk_bulk_get_all()
media: synopsys: csi2rx: use devm_reset_control_get_optional_exclusive()
media: i2c: imx283: add support for non-continuous MIPI clock mode
media: i2c: ov08d10: add support for 24 MHz input clock
media: i2c: ov08d10: add support for reset and power management
media: i2c: ov08d10: add support for binding via device tree
dt-bindings: media: i2c: document Omnivision OV08D10 CMOS image sensor
media: i2c: ov08d10: add missing newline to prints
media: i2c: ov08d10: fix some typos in comments
media: i2c: ov08d10: remove duplicate register write
media: i2c: ov08d10: fix image vertical start setting
media: i2c: ov08d10: fix runtime PM handling in probe
staging: media: ipu7: Update TODO
media: Add t4ka3 camera sensor driver
media: i2c: Add ov2732 image sensor driver
...
Pull gpio updates from Bartosz Golaszewski:
"For this merge window we have two new drivers: support for
GPIO-signalled ACPI events on Intel platforms and a generic
GPIO-over-pinctrl driver using the ARM SCMI protocol for
controlling pins.
Several things have been reworked in GPIO core: we unduplicated GPIO
hog handling, reduced the number of SRCU locks and dereferences,
improved support for software-node-based lookup and removed more
legacy code after converting remaining users to modern alternatives.
There's also a number of driver reworks and refactoring, documentation
updates, some bug-fixes and new tests.
GPIO core:
- defer probe on software node lookups when the remote software node
exists but has not been registered as a firmware node yet
- unify GPIO hog handling by moving code duplicated in OF and ACPI
modules into GPIO core and allow setting up hogs with software
nodes
- allow matching GPIO controllers by secondary firmware node if
matching by primary does not succeed
- demote deferral warnings to debug level as they are quite normal
when using software nodes which don't support fw_devlink yet
- disable the legacy GPIO character device uAPI v1 supprt in Kconfig
by default
- rework several core functions in preparation for the upcoming
Revocable helper library for protecting resources against sudden
removal, this reduces the number of SRCU dereferences in GPIO core
- simplify file descriptor logic in GPIO character device code by
using FD_PREPARE()
- introduce a header defining symbols used by both GPIO consumers and
providers to avoid having to include provider-specific headers from
drivers which only consume GPIOs
- replace snprintf() with strscpy() where formatting is not required
New drivers:
- add the gpio-by-pinctrl generic driver using the ARM SCMI protocol
to control GPIOs (along with SCMI changes pulled from the pinctrl
tree)
- add a driver providing support for handling of platform events via
GPIO-signalled ACPI events (used on Intel Nova Lake and later
platforms)
Driver changes:
- extend the gpio-kempld driver with support for more recent models,
interrupts and setting/getting multiple values at once
- improve interrupt handling in gpio-brcmstb
- add support for multi-SoC systems in gpio-tegra186
- make sure we return correct values from the .get() callbacks in
several GPIO drivers by normalizing any values other than 0, 1 or
negative error numbers
- use flexible arrays in several drivers to reduce the number of
required memory allocations
- simplify synchronous waiting for virtual drivers to probe and
remove the dedicated, a bit overengineered helper library
dev-sync-probe
- remove unneeded Kconfig dependencies on OF_GPIO in several drivers
and subsystems
- convert the two remaining users of of_get_named_gpio() to using
GPIO descriptors and remove the (no longer used) function along
with the header that declares it
- add missing includes in gpio-mmio
- shrink and simplify code in gpio-max732x by using guard(mutex)
- remove duplicated code handling the 'ngpios' property from
gpio-ts4800, it's already handled in GPIO core
- use correct variable type in gpio-aspeed
- add support for a new model in gpio-realtek-otto
- allow to specify the active-low setting of simulated hogs over the
configfs interface (in addition to existing devicetree support) in
gpio-sim
Bug fixes:
- clear the OF_POPULATED flag on hog nodes in GPIO chip remove path
on OF systems
- fix resource leaks in error path in gpiochip_add_data_with_key()
- drop redundant device reference in gpio-mpsse
Tests:
- add selftests for use-after-free cases in GPIO character device
code
DT bindings:
- add a DT binding document for SCMI based, gpio-over-pinctrl devices
- fix interrupt description in microchip,mpfs-gpio
- add new compatible for gpio-realtek-otto
- describe the resets of the mpfs-gpio controller
- fix maintainer's email in gpio-delay bindings
- remove the binding document for cavium,thunder-8890 as the
corresponding device is bound over PCI and not firmware nodes
Documentation:
- update the recommended way of converting legacy boards to using
software nodes for GPIO description
- describe GPIO line value semantics
- misc updates to kerneldocs
Misc:
- convert OMAP1 ams-delta board to using GPIO hogs described with
software nodes"
* tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: swnode: defer probe on references to unregistered software nodes
dt-bindings: gpio: cavium,thunder-8890: Remove DT binding
Documentation: gpio: update the preferred method for using software node lookup
gpio: gpio-by-pinctrl: s/used to do/is used to do/
gpio: aspeed: fix unsigned long int declaration
gpio: rockchip: convert to dynamic GPIO base allocation
gpio: remove dev-sync-probe
gpio: virtuser: stop using dev-sync-probe
gpio: aggregator: stop using dev-sync-probe
gpio: sim: stop using dev-sync-probe
gpio: Add Intel Nova Lake ACPI GPIO events driver
gpiolib: Make deferral warnings debug messages
gpiolib: fix hogs with multiple lines
gpio: fix up CONFIG_OF dependencies
gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver
gpio: dt-bindings: Add GPIO on top of generic pin control
firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP
pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE
pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support
pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE
...
fwnode_property_get_reference_args() now returns -ENOTCONN when called
on a software node referencing another software node which has not yet
been registered as a firmware node. It makes sense to defer probe in this
situation as the node will most likely be registered later on and we'll
be able to resolve the reference eventually. Change the behavior of
swnode_find_gpio() to return -EPROBE_DEFER if the software node reference
resolution returns -ENOTCONN.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260407-swnode-unreg-retcode-v4-2-1b2f0725eb9c@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
tegra_gpio_irq_release_resources() erroneously calls tegra_gpio_enable()
instead of tegra_gpio_disable(). When IRQ resources are released, the
GPIO configuration bit (CNF) should be cleared to deconfigure the pin as
a GPIO. Leaving it enabled wastes power and can cause unexpected behavior
if the pin is later reused for an alternate function via pinctrl.
Fixes: 66fecef5bd ("gpio: tegra: Convert to gpio_irq_chip")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Link: https://patch.msgid.link/20260407210247.1737938-1-samasth.norway.ananda@oracle.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Currently the probe does not check whether getting the regmap succeeded.
This can cause crash when regmap is used, if it wasn't successfully
obtained. Failing to get the regmap is unlikely, especially since this
driver is expected to be kicked by the MFD driver only after registering
the regmap - but it is still better to handle this gracefully.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: e7eef0bd4075 ("regulator: bd71828-regulator.c: Fix LDON-HEAD mode")
Link: https://patch.msgid.link/5bfffee380863bcf24f3062e48094c8eb7b1342f.1775565381.git.mazziesaccount@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
This driver is used on device tree based platform. Use dynamic
GPIO numberspace base to suppress the warning:
gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/1774864401-177149-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
With the recent addition of the shared GPIO support, warning messages
such as the following are being observed ...
reg-fixed-voltage regulator-vdd-3v3-pcie: cannot find GPIO chip
gpiolib_shared.proxy.6, deferring
These are seen even with GPIO_SHARED_PROXY=y.
Given that the GPIOs are successfully found a bit later during boot and
the code is intentionally returning -EPROBE_DEFER when they are not
found, downgrade these messages to debug prints to avoid unnecessary
warnings being observed.
Note that although the 'cannot find GPIO line' warning has not been
observed in this case, it seems reasonable to make this print a debug
print for consistency too.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260401133441.47641-1-jonathanh@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Add support for interrupts to the PolarFire SoC GPIO driver. Each GPIO
has an independent interrupt that is wired to an interrupt mux that sits
between the controllers and the PLIC. The SoC has more GPIO lines than
connections from the mux to the PLIC, so some GPIOs must share PLIC
interrupts. The configuration is not static and is set at runtime,
conventionally by the platform's firmware. CoreGPIO, the version
intended for use in the FPGA fabric has two interrupt output ports, one
is IO_NUM bits wide, as is used in the hardened cores, and the other is
a single bit with all lines ORed together.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Commit 710abda580 ("gpio: shared: call gpio_chip::of_xlate() if set")
introduced a critical section around the adjustmenet of entry->offset.
However this may cause a deadlock if we create the auxiliary shared
proxy devices with this lock taken. We only need to protect
entry->offset while it's read/written so shorten the critical section
and release the lock before creating the proxy device as the field in
question is no longer accessed at this point.
Fixes: 710abda580 ("gpio: shared: call gpio_chip::of_xlate() if set")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260325-gpio-shared-deadlock-v1-1-e4e7a5319e95@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
A number of GPIO drivers that used to have a CONFIG_OF_GPIO dependency now fail
to build on targets without CONFIG_OF:
WARNING: unmet direct dependencies detected for GPIO_SYSCON
Depends on [n]: GPIOLIB [=y] && HAS_IOMEM [=y] && MFD_SYSCON [=y] && OF [=n]
Selected by [y]:
- GPIO_SAMA5D2_PIOBU [=y] && GPIOLIB [=y] && HAS_IOMEM [=y] && MFD_SYSCON [=y] && (ARCH_AT91 || COMPILE_TEST [=y])
drivers/gpio/gpio-mt7621.c: In function 'mediatek_gpio_bank_probe':
drivers/gpio/gpio-mt7621.c:254:20: error: 'struct gpio_chip' has no member named 'of_gpio_n_cells'
254 | rg->chip.gc.of_gpio_n_cells = 2;
| ^
drivers/gpio/gpio-tegra186.c: In function 'tegra186_gpio_of_xlate':
drivers/gpio/gpio-tegra186.c:502:25: error: 'struct gpio_chip' has no member named 'of_gpio_n_cells'
502 | if (WARN_ON(chip->of_gpio_n_cells < 2))
| ^~
drivers/gpio/gpio-lpc32xx.c: In function 'lpc32xx_gpio_probe':
drivers/gpio/gpio-lpc32xx.c:523:49: error: 'struct gpio_chip' has no member named 'of_xlate'
523 | lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate;
| ^
drivers/gpio/gpio-spacemit-k1.c: In function 'spacemit_gpio_add_bank':
drivers/gpio/gpio-spacemit-k1.c:234:11: error: 'struct gpio_chip' has no member named 'of_gpio_n_cells'
234 | gc->of_gpio_n_cells = 3;
| ^~
Bring that back as a dependency.
Fixes: 7803501e57 ("gpio: drop unneeded Kconfig dependencies on OF_GPIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260325100144.1696731-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly. Remove all Kconfig dependencies/selects for GPIO drivers.
For those that have no other dependencies: convert it to requiring
CONFIG_OF instead to avoid new symbols popping up in make config.
Link: https://patch.msgid.link/20260316-gpio-of-kconfig-v2-3-de2f4b00a0e4@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Assign gpiochip_generic_config() to the set_config() callback to support
pin configuration through the GPIO subsystem. This allows users to
configure GPIO pin attributes like pull-up/down when specifying a GPIO
line in the Device Tree.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add a GPIO IRQ chip implementation for the kempld GPIO controller. Of
note is only how the parent IRQ is obtained.
The IRQ for the GPIO controller can be configured in the BIOS, along
with the IRQ for the I2C controller. These IRQ are returned by ACPI
but this information is only usable if both IRQ are configured. When
only one is configured, only one is returned making it impossible to
know which one it is.
Luckily the BIOS will set the configured IRQ in the PLD registers, so
it can be read from there instead, and that also work on platforms
without ACPI.
The vendor driver allowed to override the IRQ using a module
parameters, so there are boards in field which used this parameter
instead of properly configuring the BIOS. This implementation provides
this as well for compatibility.
Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260311143120.2179347-5-alban.bedel@lht.dlh.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The hardware uses 8 bit registers but supports configurations with up
to 16 GPIO, so all GPIO registers come in pairs. Most accesses to
single bits is done using the kempld_gpio_bitop() and
kempld_gpio_get_bit() functions, which take a register index and bit
offset as parameter. These functions apply a modulo on the bit offset
but leave the register index as is, so callers have to use an
additional macro to fix the register index before the call.
Simplify things by also handling the register index offsetting in the
bitop functions.
Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260311143120.2179347-2-alban.bedel@lht.dlh.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Convert the max732x driver to use the RAII-based guard(mutex) macro from
<linux/cleanup.h>. This change replaces manual mutex_lock() and
mutex_unlock() calls, allowing the chip lock to be managed automatically
based on function scope.
Refactor max732x_gpio_set_mask() and max732x_irq_update_mask() to
improve code readability. This allows for direct returns and removes
the redundant 'out' label in the set_mask function, resulting in
cleaner and more maintainable code.
While at it: order includes alphabetically and add missing ones.
Signed-off-by: Richard Lyu <richard.lyu@suse.com>
Link: https://patch.msgid.link/20260311085924.191288-1-richard.lyu@suse.com
[Bartosz: tweak commit message, add err.h and device.h to includes]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
