Thomas needs 5a498d4d06 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
clang warns on this because it has an unannotated fall-through between
cases:
arch/x86/kvm/x86.c:4819:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
and while we could annotate it as a fallthrough, the proper fix is to
just add the break for this case, instead of falling through to the
default case and the break there.
gcc also has that warning, but it looks like gcc only warns for the
cases where they fall through to "real code", rather than to just a
break. Odd.
Fixes: d30d9ee94c ("KVM: x86: Only advertise KVM_CAP_READONLY_MEM when supported by VM")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull arm64 fix from Catalin Marinas:
"Fix the arm64 usage of ftrace_graph_ret_addr() to pass the
&state->graph_idx pointer instead of NULL, otherwise this function
just returns early"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: stacktrace: fix the usage of ftrace_graph_ret_addr()
Pull RISC-V fixes from Palmer Dabbelt:
- A revert for the mmap() change that ties the allocation range to the
hint adress, as what we tried to do ended up regressing on other
userspace workloads.
- A fix to avoid a kernel memory leak when emulating misaligned
accesses from userspace.
- A Kconfig fix for toolchain vector detection, which now correctly
detects vector support on toolchains where the V extension depends on
the M extension.
- A fix to avoid failing the linear mapping bootmem bounds check on
NOMMU systems.
- A fix for early alternatives on relocatable kernels.
* tag 'riscv-for-linus-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix RISCV_ALTERNATIVE_EARLY
riscv: Do not restrict memory size because of linear mapping on nommu
riscv: Fix toolchain vector detection
riscv: misaligned: Restrict user access to kernel memory
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
Pull powerpc fixes from Michael Ellerman:
- Fix a deadlock in the powerpc qspinlock MCS queue logic
- Fix the return type of pgd_val() to not truncate 64-bit PTEs on 85xx
- Allow the check for dynamic relocations in the VDSO to work correctly
- Make mmu_pte_psize static to fix a build error
Thanks to Christophe Leroy, Nysal Jan K.A., Nicholas Piggin, Geetika
Moolchandani, Jijo Varghese, and Vaishnavi Bhat.
* tag 'powerpc-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/qspinlock: Fix deadlock in MCS queue
powerpc/mm: Fix return type of pgd_val()
powerpc/vdso: Don't discard rela sections
powerpc/64e: Define mmu_pte_psize static
Pull x86 kvm fixes from Paolo Bonzini:
"Many small fixes that accumulated while I was on vacation...
- Fixup missed comments from the REMOVED_SPTE => FROZEN_SPTE rename
- Ensure a root is successfully loaded when pre-faulting SPTEs
- Grab kvm->srcu when handling KVM_SET_VCPU_EVENTS to guard against
accessing memslots if toggling SMM happens to force a VM-Exit
- Emulate MSR_{FS,GS}_BASE on SVM even though interception is always
disabled, so that KVM does the right thing if KVM's emulator
encounters {RD,WR}MSR
- Explicitly clear BUS_LOCK_DETECT from KVM's caps on AMD, as KVM
doesn't yet virtualize BUS_LOCK_DETECT on AMD
- Cleanup the help message for CONFIG_KVM_AMD_SEV, and call out that
KVM now supports SEV-SNP too
- Specialize return value of
KVM_CHECK_EXTENSION(KVM_CAP_READONLY_MEM), based on VM type
- Remove unnecessary dependency on CONFIG_HIGH_RES_TIMERS
- Note an RCU quiescent state on guest exit. This avoids a call to
rcu_core() if there was a grace period request while guest was
running"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Remove HIGH_RES_TIMERS dependency
kvm: Note an RCU quiescent state on guest exit
KVM: x86: Only advertise KVM_CAP_READONLY_MEM when supported by VM
KVM: SEV: Update KVM_AMD_SEV Kconfig entry and mention SEV-SNP
KVM: SVM: Don't advertise Bus Lock Detect to guest if SVM support is missing
KVM: SVM: fix emulation of msr reads/writes of MSR_FS_BASE and MSR_GS_BASE
KVM: x86: Acquire kvm->srcu when handling KVM_SET_VCPU_EVENTS
KVM: x86/mmu: Check that root is valid/loaded when pre-faulting SPTEs
KVM: x86/mmu: Fixup comments missed by the REMOVED_SPTE=>FROZEN_SPTE rename
Commit 92b5265d38 ("KVM: Depend on HIGH_RES_TIMERS") added a dependency
to high resolution timers with the comment:
KVM lapic timer and tsc deadline timer based on hrtimer,
setting a leftmost node to rb tree and then do hrtimer reprogram.
If hrtimer not configured as high resolution, hrtimer_enqueue_reprogram
do nothing and then make kvm lapic timer and tsc deadline timer fail.
That was back in 2012, where hrtimer_start_range_ns() would do the
reprogramming with hrtimer_enqueue_reprogram(). But as that was a nop with
high resolution timers disabled, this did not work. But a lot has changed
in the last 12 years.
For example, commit 49a2a07514 ("hrtimer: Kick lowres dynticks targets on
timer enqueue") modifies __hrtimer_start_range_ns() to work with low res
timers. There's been lots of other changes that make low res work.
ChromeOS has tested this before as well, and it hasn't seen any issues
with running KVM with high res timers disabled. There could be problems,
especially at low HZ, for guests that do not support kvmclock and rely
on precise delivery of periodic timers to keep their clock running.
This can be the APIC timer (provided by the kernel), the RTC (provided
by userspace), or the i8254 (choice of kernel/userspace). These guests
are few and far between these days, and in the case of the APIC timer +
Intel hosts we can use the preemption timer (which is TSC-based and has
better latency _and_ accuracy).
In KVM, only x86 is requiring CONFIG_HIGH_RES_TIMERS; perhaps a "depends
on HIGH_RES_TIMERS || EXPERT" could be added to virt/kvm, or a pr_warn
could be added to kvm_init if HIGH_RES_TIMERS are not enabled. But in
general, it seems that there must be other code in the kernel (maybe
sound/?) that is relying on having high-enough HZ or hrtimers but that's
not documented anywhere. Whenever you disable it you probably need to
know what you're doing and what your workload is; so the dependency is
not particularly interesting, and we can just remove it.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Message-ID: <20240821095127.45d17b19@gandalf.local.home>
[Added the last two paragraphs to the commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ftrace_graph_ret_addr() takes an 'idx' integer pointer that is used to
optimize the stack unwinding process. arm64 currently passes `NULL` for
this parameter which stops it from utilizing these optimizations.
Further, the current code for ftrace_graph_ret_addr() will just return
the passed in return address if it is NULL which will break this usage.
Pass a valid integer pointer to ftrace_graph_ret_addr() similar to
x86_64's stack unwinder.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Fixes: 29c1c24a27 ("function_graph: Fix up ftrace_graph_ret_addr()")
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240618162342.28275-1-puranjay@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull ARM fix from Russell King:
- Fix a build issue with older binutils with LD dead code elimination
disabled
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9414/1: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION
Pull parisc architecture fix from Helge Deller:
- Fix boot issue where boot memory is marked read-only too early
* tag 'parisc-for-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Delay write-protection until mark_rodata_ro() call
There is a build issue with LD segmentation fault, while
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled, as bellow.
scripts/link-vmlinux.sh: line 49: 3796 Segmentation fault
(core dumped) ${ld} ${ldflags} -o ${output} ${wl}--whole-archive
${objs} ${wl}--no-whole-archive ${wl}--start-group
${libs} ${wl}--end-group ${kallsymso} ${btf_vmlinux_bin_o} ${ldlibs}
The error occurs in older versions of the GNU ld with version earlier
than 2.36. It makes most sense to have a minimum LD version as
a dependency for HAVE_LD_DEAD_CODE_DATA_ELIMINATION and eliminate
the impact of ".reloc .text, R_ARM_NONE, ." when
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled.
Fixes: ed0f941022 ("ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION")
Reported-by: Harith George <mail2hgg@gmail.com>
Tested-by: Harith George <mail2hgg@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://lore.kernel.org/all/14e9aefb-88d1-4eee-8288-ef15d4a9b059@gmail.com/
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Until recently, KVM_CAP_READONLY_MEM was unconditionally supported on
x86, but this is no longer the case for SEV-ES and SEV-SNP VMs.
When KVM_CHECK_EXTENSION is invoked on a VM, only advertise
KVM_CAP_READONLY_MEM when it's actually supported.
Fixes: 66155de93b ("KVM: x86: Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)")
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Signed-off-by: Tom Dohrmann <erbse.13@gmx.de>
Message-ID: <20240902144219.3716974-1-erbse.13@gmx.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull x86 fixes from Thomas Gleixner:
- x2apic_disable() clears x2apic_state and x2apic_mode unconditionally,
even when the state is X2APIC_ON_LOCKED, which prevents the kernel to
disable it thereby creating inconsistent state.
Reorder the logic so it actually works correctly
- The XSTATE logic for handling LBR is incorrect as it assumes that
XSAVES supports LBR when the CPU supports LBR. In fact both
conditions need to be true. Otherwise the enablement of LBR in the
IA32_XSS MSR fails and subsequently the machine crashes on the next
XRSTORS operation because IA32_XSS is not initialized.
Cache the XSTATE support bit during init and make the related
functions use this cached information and the LBR CPU feature bit to
cure this.
- Cure a long standing bug in KASLR
KASLR uses the full address space between PAGE_OFFSET and vaddr_end
to randomize the starting points of the direct map, vmalloc and
vmemmap regions. It thereby limits the size of the direct map by
using the installed memory size plus an extra configurable margin for
hot-plug memory. This limitation is done to gain more randomization
space because otherwise only the holes between the direct map,
vmalloc, vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel,
so the memory hot-plug and resource management related code paths
still operate under the assumption that the available address space
can be determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of
the direct map and if unlucky this address is in the vmalloc space,
which causes high_memory to become greater than VMALLOC_START and
consequently causes iounmap() to fail for valid ioremap addresses.
Cure this by exposing the end of the direct map via PHYSMEM_END and
use that for the memory hot-plug and resource management related
places instead of relying on MAX_PHYSMEM_BITS. In the KASLR case
PHYSMEM_END maps to a variable which is initialized by the KASLR
initialization and otherwise it is based on MAX_PHYSMEM_BITS as
before.
- Prevent a data leak in mmio_read(). The TDVMCALL exposes the value of
an initialized variabled on the stack to the VMM. The variable is
only required as output value, so it does not have to exposed to the
VMM in the first place.
- Prevent an array overrun in the resource control code on systems with
Sub-NUMA Clustering enabled because the code failed to adjust the
index by the number of SNC nodes per L3 cache.
* tag 'x86-urgent-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix arch_mbm_* array overrun on SNC
x86/tdx: Fix data leak in mmio_read()
x86/kaslr: Expose and use the end of the physical memory address space
x86/fpu: Avoid writing LBR bit to IA32_XSS unless supported
x86/apic: Make x2apic_disable() work correctly
Pull perf fix from Thomas Gleixner:
"A single fix for x86 performance monitoring.
Haswell PMUs suffer from several errata and require a limit the
minimal period for counter events, otherwise they suffer from endless
loops in the PMU interrupt"
* tag 'perf-urgent-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Limit the period on Haswell
Pull misc fixes from Guenter Roeck.
These are fixes for regressions that Guenther has been reporting, and
the maintainers haven't picked up and sent in. With rc6 fairly imminent,
I'm taking them directly from Guenter.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
apparmor: fix policy_unpack_test on big endian systems
Revert "MIPS: csrc-r4k: Apply verification clocksource flags"
microblaze: don't treat zero reserved memory regions as error
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
Charlie Jenkins <charlie@rivosinc.com> says:
There have been a couple of reports that using the hint address to
restrict the address returned by mmap hint address has caused issues in
applications. A different solution for restricting addresses returned by
mmap is necessary to avoid breakages.
[Palmer: This also just wasn't doing the right thing in the first place,
as it didn't handle the sv39 cases we were trying to deal with.]
* b4-shazam-merge:
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-0-cd8962afe47f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If an interrupt occurs in queued_spin_lock_slowpath() after we increment
qnodesp->count and before node->lock is initialized, another CPU might
see stale lock values in get_tail_qnode(). If the stale lock value happens
to match the lock on that CPU, then we write to the "next" pointer of
the wrong qnode. This causes a deadlock as the former CPU, once it becomes
the head of the MCS queue, will spin indefinitely until it's "next" pointer
is set by its successor in the queue.
Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in
occasional lockups similar to the following:
$ stress-ng --all 128 --vm-bytes 80% --aggressive \
--maximize --oomable --verify --syslog \
--metrics --times --timeout 5m
watchdog: CPU 15 Hard LOCKUP
......
NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
Call Trace:
0xc000002cfffa3bf0 (unreliable)
_raw_spin_lock+0x6c/0x90
raw_spin_rq_lock_nested.part.135+0x4c/0xd0
sched_ttwu_pending+0x60/0x1f0
__flush_smp_call_function_queue+0x1dc/0x670
smp_ipi_demux_relaxed+0xa4/0x100
xive_muxed_ipi_action+0x20/0x40
__handle_irq_event_percpu+0x80/0x240
handle_irq_event_percpu+0x2c/0x80
handle_percpu_irq+0x84/0xd0
generic_handle_irq+0x54/0x80
__do_irq+0xac/0x210
__do_IRQ+0x74/0xd0
0x0
do_IRQ+0x8c/0x170
hardware_interrupt_common_virt+0x29c/0x2a0
--- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490
......
NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
--- interrupt: 500
0xc0000029c1a41d00 (unreliable)
_raw_spin_lock+0x6c/0x90
futex_wake+0x100/0x260
do_futex+0x21c/0x2a0
sys_futex+0x98/0x270
system_call_exception+0x14c/0x2f0
system_call_vectored_common+0x15c/0x2ec
The following code flow illustrates how the deadlock occurs.
For the sake of brevity, assume that both locks (A and B) are
contended and we call the queued_spin_lock_slowpath() function.
CPU0 CPU1
---- ----
spin_lock_irqsave(A) |
spin_unlock_irqrestore(A) |
spin_lock(B) |
| |
▼ |
id = qnodesp->count++; |
(Note that nodes[0].lock == A) |
| |
▼ |
Interrupt |
(happens before "nodes[0].lock = B") |
| |
▼ |
spin_lock_irqsave(A) |
| |
▼ |
id = qnodesp->count++ |
nodes[1].lock = A |
| |
▼ |
Tail of MCS queue |
| spin_lock_irqsave(A)
▼ |
Head of MCS queue ▼
| CPU0 is previous tail
▼ |
Spin indefinitely ▼
(until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0)
|
▼
prev == &qnodes[CPU0].nodes[0]
(as qnodes[CPU0].nodes[0].lock == A)
|
▼
WRITE_ONCE(prev->next, node)
|
▼
Spin indefinitely
(until nodes[0].locked == 1)
Thanks to Saket Kumar Bhaskar for help with recreating the issue
Fixes: 84990b1695 ("powerpc/qspinlock: add mcs queueing for contended waiters")
Cc: stable@vger.kernel.org # v6.2+
Reported-by: Geetika Moolchandani <geetika@linux.ibm.com>
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Reported-by: Jijo Varghese <vargjijo@in.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240829022830.1164355-1-nysal@linux.ibm.com
Qualcomm Arm64 DeviceTree fixes for v6.11
On X1E the GPU node is disabled by default, to be enabled in the
individual devices once the developers install the required firmware.
The generic EDP panel driver used on the X1E CRD is replaced with the
Samsung ATNA45AF01 driver, in order to ensure backlight is brought back
up after being turned off.
The pin configuration for PCIe-related pins are corrected across all the
X1E targets. The PCIe controllers gain a minimum OPP vote, and PCIe
domain numbers are corrected.
WiFi calibration variant information is added to the Lenovo Yoga Slim
7x, to pick the right data from the firmware packages.
The incorrect Adreno SMMU global interrupt is corrected.
For IPQ5332, the IRQ triggers for the USB controller are corrected.
* tag 'qcom-arm64-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: qcom: x1e80100-crd: Fix backlight
arm64: dts: qcom: x1e80100-yoga-slim7x: fix missing PCIe4 gpios
arm64: dts: qcom: x1e80100-yoga-slim7x: disable PCIe6a perst pull down
arm64: dts: qcom: x1e80100-yoga-slim7x: fix up PCIe6a pinctrl node
arm64: dts: qcom: x1e80100-yoga-slim7x: fix PCIe4 PHY supply
arm64: dts: qcom: x1e80100-vivobook-s15: fix missing PCIe4 gpios
arm64: dts: qcom: x1e80100-vivobook-s15: disable PCIe6a perst pull down
arm64: dts: qcom: x1e80100-vivobook-s15: fix up PCIe6a pinctrl node
arm64: dts: qcom: x1e80100-vivobook-s15: fix PCIe4 PHY supply
arm64: dts: qcom: x1e80100-qcp: fix missing PCIe4 gpios
arm64: dts: qcom: x1e80100-qcp: disable PCIe6a perst pull down
arm64: dts: qcom: x1e80100-qcp: fix up PCIe6a pinctrl node
arm64: dts: qcom: x1e80100-qcp: fix PCIe4 PHY supply
arm64: dts: qcom: x1e80100-crd: fix missing PCIe4 gpios
arm64: dts: qcom: x1e80100-crd: disable PCIe6a perst pull down
arm64: dts: qcom: x1e80100-crd: fix up PCIe6a pinctrl node
arm64: dts: qcom: x1e80100: add missing PCIe minimum OPP
arm64: dts: qcom: x1e80100: fix PCIe domain numbers
...
Link: https://lore.kernel.org/r/20240826152426.1648383-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 6.11:
- One imx8mp-beacon-kit change from Adam Ford to fix the broken WM8962
audio support
- One pinctrl property typo fix for imx8mm-phygate
- One layerscape fix from Krzysztof Kozlowski to get thermal nodes
correct name length
- A couple of imx93-tqma9352 fixes from Markus Niebel, one on CMA
alloc-ranges and the other on SD-Card cd-gpios typo
- One change from Michal Vokáč to fix imx6dl-yapp43 LED current to match
the HW design
- A couple of imx95 fixes from Peng Fan, one to correct a55 power
domains and the other to correct L3Cache cache-sets
- One tqma9352 watchdog reset fix from Sascha Hauer
- One imx93 change from Shenwei Wang to fix the default value for STMMAC
EQOS snps,clk-csr
* tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
arm64: dts: layerscape: fix thermal node names length
Link: https://lore.kernel.org/r/ZrtsTO1+jXhJ6GSM@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SEV-SNP support is present since commit 1dfe571c12 ("KVM: SEV: Add
initial SEV-SNP support") but Kconfig entry wasn't updated and still
mentions SEV and SEV-ES only. Add SEV-SNP there and, while on it, expand
'SEV' in the description as 'Encrypted VMs' is not what 'SEV' stands for.
No functional change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240828122111.160273-1-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When using resctrl on systems with Sub-NUMA Clustering enabled, monitoring
groups may be allocated RMID values which would overrun the
arch_mbm_{local,total} arrays.
This is due to inconsistencies in whether the SNC-adjusted num_rmid value or
the unadjusted value in resctrl_arch_system_num_rmid_idx() is used. The
num_rmid value for the L3 resource is currently:
resctrl_arch_system_num_rmid_idx() / snc_nodes_per_l3_cache
As a simple fix, make resctrl_arch_system_num_rmid_idx() return the
SNC-adjusted, L3 num_rmid value on x86.
Fixes: e13db55b5a ("x86/resctrl: Introduce snc_nodes_per_l3_cache")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240822190212.1848788-1-peternewman@google.com
amdgpu pr conconflicts due to patches cherry-picked to -fixes, I might
as well catch up with a backmerge and handle them all. Plus both misc
and intel maintainers asked for a backmerge anyway.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If ParaVirt steal time feature is enabled, there is a percpu gpa address
passed from guest vCPU and host modifies guest memory space with this gpa
address. When vCPU is reset normally, it will notify host and invalidate
gpa address.
However if VM is crashed and VMM reboots VM forcely, the vCPU reboot
notification callback will not be called in VM. Host needs invalidate
the gpa address, else host will modify guest memory during VM reboots.
Here it is invalidated from the vCPU KVM_REG_LOONGARCH_VCPU_RESET ioctl
interface.
Also funciton kvm_reset_timer() is removed at vCPU reset stage, since SW
emulated timer is only used in vCPU block state. When a vCPU is removed
from the block waiting queue, kvm_restore_timer() is called and SW timer
is cancelled. And the timer register is also cleared at VMM when a vCPU
is reset.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
There exist some warnings when building kernel if CONFIG_CPU_HAS_LBT is
set but CONFIG_CPU_HAS_LSX and CONFIG_CPU_HAS_LASX are not set. In this
case, there are no definitions of _restore_lsx & _restore_lasx and there
are also no definitions of kvm_restore_lsx & kvm_restore_lasx in fpu.S
and switch.S respectively, just add some ifdefs to fix these warnings.
AS arch/loongarch/kernel/fpu.o
arch/loongarch/kernel/fpu.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
arch/loongarch/kernel/fpu.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
AS [M] arch/loongarch/kvm/switch.o
arch/loongarch/kvm/switch.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
arch/loongarch/kvm/switch.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
MODPOST Module.symvers
ERROR: modpost: "kvm_restore_lsx" [arch/loongarch/kvm/kvm.ko] undefined!
ERROR: modpost: "kvm_restore_lasx" [arch/loongarch/kvm/kvm.ko] undefined!
Cc: stable@vger.kernel.org # 6.9+
Fixes: cb8a2ef084 ("LoongArch: Add ORC stack unwinder support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408120955.qls5oNQY-lkp@intel.com/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently we call irq_set_noprobe() in a loop for all IRQs, but indeed
it only works for IRQs below NR_IRQS_LEGACY because at init_IRQ() only
legacy interrupts have been allocated.
Instead, we can define ARCH_IRQ_INIT_FLAGS as IRQ_NOPROBE in asm/hwirq.h
and the core will automatically set the flag for all interrupts.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
This reverts commit 7190401fc5.
Verifying the clock source sometimes deems the MIPS clock
to be unstable, at least in qemu.
clocksource: timekeeping watchdog on CPU0: Marking clocksource 'MIPS' as unstable because the skew is too large:
clocksource: 'jiffies' wd_nsec: 500000000 wd_now: ffff8bde wd_last: ffff8bac mask: ffffffff
clocksource: 'MIPS' cs_nsec: 940634468 cs_now: 310181c4 cs_last: 28090a09 mask: ffffffff
clocksource: Clocksource 'MIPS' skewed 440634468 ns (440 ms) over watchdog 'jiffies' interval of 500000000 ns (500 ms)
clocksource: 'MIPS' is current clocksource.
If this happens, network interfaces fail to come online.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Before commit 721f4a6526 ("mm/memblock: remove empty dummy entry") the
check for non-zero of memblock.reserved.cnt in mmu_init() would always
be true either because memblock.reserved.cnt is initialized to 1 or
because there were memory reservations earlier.
The removal of dummy empty entry in memblock caused this check to fail
because now memblock.reserved.cnt is initialized to 0.
Remove the check for non-zero of memblock.reserved.cnt because it's
perfectly fine to have an empty memblock.reserved array that early in
boot.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240729053327.4091459-1-rppt@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Running the ltp test cve-2015-3290 concurrently reports the following
warnings.
perfevents: irq loop stuck!
WARNING: CPU: 31 PID: 32438 at arch/x86/events/intel/core.c:3174
intel_pmu_handle_irq+0x285/0x370
Call Trace:
<NMI>
? __warn+0xa4/0x220
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? report_bug+0x3e/0xa0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? irq_work_claim+0x1e/0x40
? intel_pmu_handle_irq+0x285/0x370
perf_event_nmi_handler+0x3d/0x60
nmi_handle+0x104/0x330
Thanks to Thomas Gleixner's analysis, the issue is caused by the low
initial period (1) of the frequency estimation algorithm, which triggers
the defects of the HW, specifically erratum HSW11 and HSW143. (For the
details, please refer https://lore.kernel.org/lkml/87plq9l5d2.ffs@tglx/)
The HSW11 requires a period larger than 100 for the INST_RETIRED.ALL
event, but the initial period in the freq mode is 1. The erratum is the
same as the BDM11, which has been supported in the kernel. A minimum
period of 128 is enforced as well on HSW.
HSW143 is regarding that the fixed counter 1 may overcount 32 with the
Hyper-Threading is enabled. However, based on the test, the hardware
has more issues than it tells. Besides the fixed counter 1, the message
'interrupt took too long' can be observed on any counter which was armed
with a period < 32 and two events expired in the same NMI. A minimum
period of 32 is enforced for the rest of the events.
The recommended workaround code of the HSW143 is not implemented.
Because it only addresses the issue for the fixed counter. It brings
extra overhead through extra MSR writing. No related overcounting issue
has been reported so far.
Fixes: 3a632cb229 ("perf/x86/intel: Add simple Haswell PMU support")
Reported-by: Li Huafei <lihuafei1@huawei.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240819183004.3132920-1-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20240729223328.327835-1-lihuafei1@huawei.com/
dma-direct.h is introduced in commit d4b6f1562a ("LoongArch: Add
Non-Uniform Memory Access (NUMA) support"). In commit c78c43fe7d
("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA"),
ARCH_HAS_PHYS_TO_DMA was deselected and the coresponding phys_to_dma()/
dma_to_phys() functions were removed. However, the unused dma-direct.h
was left behind, which is removed by this patch.
Cc: <stable@vger.kernel.org>
Fixes: c78c43fe7d ("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Pull s390 fixes from Vasily Gorbik:
- Fix KASLR base offset to account for symbol offsets in the vmlinux
ELF file, preventing tool breakages like the drgn debugger
- Fix potential memory corruption of physmem_info during kernel
physical address randomization
- Fix potential memory corruption due to overlap between the relocated
lowcore and identity mapping by correctly reserving lowcore memory
- Fix performance regression and avoid randomizing identity mapping
base by default
- Fix unnecessary delay of AP bus binding complete uevent to prevent
startup lag in KVM guests using AP
* tag 's390-6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix KASLR base offset off by __START_KERNEL bytes
s390/boot: Avoid possible physmem_info segment corruption
s390/ap: Refine AP bus bindings complete processing
s390/mm: Pin identity mapping base to zero
s390/mm: Prevent lowcore vs identity mapping overlap
Pull MIPS fixes from Thomas Bogendoerfer:
- Set correct timer mode on Loongson64
- Only request r4k clockevent interrupt on one CPU
* tag 'mips-fixes_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed
MIPS: Loongson64: Set timer mode in cpu-probe
Pull arm64 kvm fixes from Catalin Marinas:
- Don't drop references on LPIs that weren't visited by the vgic-debug
iterator
- Cure lock ordering issue when unregistering vgic redistributors
- Fix for misaligned stage-2 mappings when VMs are backed by hugetlb
pages
- Treat SGI registers as UNDEFINED if a VM hasn't been configured for
GICv3
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3
KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault
KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors
KVM: arm64: vgic-debug: Don't put unmarked LPIs
KVM/arm64 fixes for 6.11, round #2
- Don't drop references on LPIs that weren't visited by the
vgic-debug iterator
- Cure lock ordering issue when unregistering vgic redistributors
- Fix for misaligned stage-2 mappings when VMs are backed by hugetlb
pages
- Treat SGI registers as UNDEFINED if a VM hasn't been configured for
GICv3
* tag 'kvmarm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm:
KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3
KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault
KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors
KVM: arm64: vgic-debug: Don't put unmarked LPIs
KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface
KVM: selftests: arm64: Correct feature test for S1PIE in get-reg-list
KVM: arm64: Tidying up PAuth code in KVM
KVM: arm64: vgic-debug: Exit the iterator properly w/o LPI
KVM: arm64: Enforce dependency on an ARMv8.4-aware toolchain
docs: KVM: Fix register ID of SPSR_FIQ
KVM: arm64: vgic: fix unexpected unlock sparse warnings
KVM: arm64: fix kdoc warnings in W=1 builds
KVM: arm64: fix override-init warnings in W=1 builds
KVM: arm64: free kvm->arch.nested_mmus with kvfree()
Grab kvm->srcu when processing KVM_SET_VCPU_EVENTS, as KVM will forcibly
leave nested VMX/SVM if SMM mode is being toggled, and leaving nested VMX
reads guest memory.
Note, kvm_vcpu_ioctl_x86_set_vcpu_events() can also be called from KVM_RUN
via sync_regs(), which already holds SRCU. I.e. trying to precisely use
kvm_vcpu_srcu_read_lock() around the problematic SMM code would cause
problems. Acquiring SRCU isn't all that expensive, so for simplicity,
grab it unconditionally for KVM_SET_VCPU_EVENTS.
=============================
WARNING: suspicious RCU usage
6.10.0-rc7-332d2c1d713e-next-vm #552 Not tainted
-----------------------------
include/linux/kvm_host.h:1027 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by repro/1071:
#0: ffff88811e424430 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x7d/0x970 [kvm]
stack backtrace:
CPU: 15 PID: 1071 Comm: repro Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #552
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x13f/0x1a0
kvm_vcpu_gfn_to_memslot+0x168/0x190 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
nested_vmx_load_msr+0x6b/0x1d0 [kvm_intel]
load_vmcs12_host_state+0x432/0xb40 [kvm_intel]
vmx_leave_nested+0x30/0x40 [kvm_intel]
kvm_vcpu_ioctl_x86_set_vcpu_events+0x15d/0x2b0 [kvm]
kvm_arch_vcpu_ioctl+0x1107/0x1750 [kvm]
? mark_held_locks+0x49/0x70
? kvm_vcpu_ioctl+0x7d/0x970 [kvm]
? kvm_vcpu_ioctl+0x497/0x970 [kvm]
kvm_vcpu_ioctl+0x497/0x970 [kvm]
? lock_acquire+0xba/0x2d0
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x40c/0x6f0
? lock_release+0xb7/0x270
__x64_sys_ioctl+0x82/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7ff11eb1b539
</TASK>
Fixes: f7e570780e ("KVM: x86: Forcibly leave nested virt when SMM state is toggled")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240723232055.3643811-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Symbol offsets to the KASLR base do not match symbol address in
the vmlinux image. That is the result of setting the KASLR base
to the beginning of .text section as result of an optimization.
Revert that optimization and allocate virtual memory for the
whole kernel image including __START_KERNEL bytes as per the
linker script. That allows keeping the semantics of the KASLR
base offset in sync with other architectures.
Rename __START_KERNEL to TEXT_OFFSET, since it represents the
offset of the .text section within the kernel image, rather than
a virtual address.
Still skip mapping TEXT_OFFSET bytes to save memory on pgtables
and provoke exceptions in case an attempt to access this area is
made, as no kernel symbol may reside there.
In case CONFIG_KASAN is enabled the location counter might exceed
the value of TEXT_OFFSET, while the decompressor linker script
forcefully resets it to TEXT_OFFSET, which leads to a sections
overlap link failure. Use MAX() expression to avoid that.
Reported-by: Omar Sandoval <osandov@osandov.com>
Closes: https://lore.kernel.org/linux-s390/ZnS8dycxhtXBZVky@telecaster.dhcp.thefacebook.com/
Fixes: 56b1069c40 ("s390/boot: Rework deployment of the kernel image")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When physical memory for the kernel image is allocated it does not
consider extra memory required for offsetting the image start to
match it with the lower 20 bits of KASLR virtual base address. That
might lead to kernel access beyond its memory range.
Suggested-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 693d41f7c9 ("s390/mm: Restore mapping of kernel image using large pages")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
