Add a driver for the AMD Versal NET DDR memory controller which supports
single bit error correction, double bit error detection and other system
errors from various IP subsystems (e.g., RPU, NOCs, HNICX, PL).
The driver listens for notifications from the NMC (Network management
controller) using RPMsg (Remote Processor Messaging).
The channel used for communicating to RPMsg is named "error_edac". Upon
receipt of a notification, the driver sends a RAS event trace.
[ bp:
- Fixup title
- Rewrite commit message
- Fixup Kconfig text
- Zap unused defines and align them
- Simplify rpmsg_cb() considerably
- Drop silly double-brackets in conditionals
- Use proper void * type in mcdi_request()
- Do not clear chinfo in rpmsg_probe() unnecessarily
- Fix indentation
- Do a proper err unwind path in init_versalnet()
- Redo the error unwind path in mc_probe() properly
- Fix the ordering in mc_remove()
]
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250908115649.22903-1-shubhrajyoti.datta@amd.com
Link: https://lore.kernel.org/r/20250703173105.GLaGa-WQCESDNsqygm@fat_crate.local
The cdx_mcdi_init(), cdx_mcdi_process_cmd(), and cdx_mcdi_rpc() functions are
needed by the VersalNET EDAC module that interact with the MCDI (Management
Controller Direct Interface) framework. These functions facilitate
communication between different hardware components by enabling command
execution and status management.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/20250908115649.22903-1-shubhrajyoti.datta@amd.com
Move bitfield.h from the CDX controller directory to include/linux/cdx to make
them accessible to other drivers.
As part of this refactoring, split mcdi.h into two headers:
- mcdi.h: retains interface-level declarations
- mcdid.h: contains internal definitions and macros
This is in preparation for VersalNET EDAC driver that relies on it.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/20250908115649.22903-1-shubhrajyoti.datta@amd.com
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add CDX-MSI domain per CDX controller with gic-its domain as
a parent, to support MSI for CDX devices. CDX devices allocate
MSIs from the CDX domain. Also, introduce APIs to alloc and free
IRQs for CDX domain.
In CDX subsystem firmware is a controller for all devices and
their configuration. CDX bus controller sends all the write_msi_msg
commands to firmware running on RPU and the firmware interfaces with
actual devices to pass this information to devices
Since, CDX controller is the only way to communicate with the Firmware
for MSI write info, CDX domain per controller required in contrast to
having a CDX domain per device.
Co-developed-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Co-developed-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20240226082816.100872-1-nipun.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
vfio-cdx driver enables IOCTLs for user space to query
MMIO regions for CDX devices and mmap them. This change
also adds support for reset of CDX devices. With VFIO
enabled on CDX devices, user-space applications can also
exercise DMA securely via IOMMU on these devices.
This change adds the VFIO CDX driver and enables the following
ioctls for CDX devices:
- VFIO_DEVICE_GET_INFO:
- VFIO_DEVICE_GET_REGION_INFO
- VFIO_DEVICE_RESET
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230531124557.11009-1-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
