The rule counter must be cleared when creating a new rule, even if the VCAP
lookup is currently disabled.
This ensures that rules located in VCAPs that use external counters (such
as Sparx5 IS2 and ES0) will have their counter reset even if the VCAP
lookup is not enabled at the moment.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Fixes: 95fa74148d ("net: microchip: sparx5: Reset VCAP counter for new rules")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A valid frame should never use a multicast address as its source MAC
address, so discard these invalid frames.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-02-14 (ice)
This series contains updates to ice driver only.
Karol extends support for GPIO pins to E823 devices.
Daniel Vacek stops processing of PTP packets when link is down.
Pawel adds support for BIG TCP for IPv6.
Tony changes return type of ice_vsi_realloc_stat_arrays() as it always
returns success.
Zhu Yanjun updates kdoc stating supported TLVs.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Mention CEE DCBX in code comment
ice: Change ice_vsi_realloc_stat_arrays() to void
ice: add support BIG TCP on IPv6
ice/ptp: fix the PTP worker retrying indefinitely if the link went down
ice: Add GPIO pin support for E823 products
====================
Link: https://lore.kernel.org/r/20230214213003.2117125-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the basic ethtool ops get_drvinfo and get_link for ngbe and txgbe.
Ngbe implements get_link_ksettings, nway_reset and set_link_ksettings
for free using phylib code.
The code related to the physical interface is not yet fully implemented
in txgbe using phylink code. So do not implement get_link_ksettings,
nway_reset and set_link_ksettings in txgbe.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230214091527.69943-1-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MSG_ZEROCOPY ensures that pinned user pages do not exceed the limit.
If no limit is set, skip this accounting as otherwise expensive
atomic_long operations are called for no reason.
This accounting is already skipped for privileged (CAP_IPC_LOCK)
users. Rely on the same mechanism: if no mmp->user is set,
mm_unaccount_pinned_pages does not decrement either.
Tested by running tools/testing/selftests/net/msg_zerocopy.sh with
an unprivileged user for the TXMODE binary:
ip netns exec "${NS1}" sudo -u "{$USER}" "${BIN}" "-${IP}" ...
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230214155740.3448763-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit a97f8783a9 ("igb: unbreak I2C bit-banging on i350") introduced
code to change I2C settings to bit banging unconditionally.
However, this patch introduced a regression: On an Intel S2600CWR
Server Board with three NICs:
- 1x dual-port copper
Intel I350 Gigabit Network Connection [8086:1521] (rev 01)
fw 1.63, 0x80000dda
- 2x quad-port SFP+ with copper SFP Avago ABCU-5700RZ
Intel I350 Gigabit Fiber Network Connection [8086:1522] (rev 01)
fw 1.52.0
the SFP NICs no longer get link at all. Reverting commit a97f8783a9
or switching to the Intel out-of-tree driver both fix the problem.
Per the igb out-of-tree driver, I2C bit banging on i350 depends on
support for an external thermal sensor (ETS). However, commit
a97f8783a9 added bit banging unconditionally. Additionally, the
out-of-tree driver always calls init_thermal_sensor_thresh on probe,
while our driver only calls init_thermal_sensor_thresh only in
igb_reset(), and only if an ETS is present, ignoring the internal
thermal sensor. The affected SFPs don't provide an ETS. Per Intel,
the behaviour is a result of i350 firmware requirements.
This patch fixes the problem by aligning the behaviour to the
out-of-tree driver:
- split igb_init_i2c() into two functions:
- igb_init_i2c() only performs the basic I2C initialization.
- igb_set_i2c_bb() makes sure that E1000_CTRL_I2C_ENA is set
and enables bit-banging.
- igb_probe() only calls igb_set_i2c_bb() if an ETS is present.
- igb_probe() calls init_thermal_sensor_thresh() unconditionally.
- igb_reset() aligns its behaviour to igb_probe(), i. e., call
igb_set_i2c_bb() if an ETS is present and call
init_thermal_sensor_thresh() unconditionally.
Fixes: a97f8783a9 ("igb: unbreak I2C bit-banging on i350")
Tested-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Co-developed-by: Jamie Bainbridge <jbainbri@redhat.com>
Signed-off-by: Jamie Bainbridge <jbainbri@redhat.com>
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230214185549.1306522-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The __RISCV_INSN_FUNCS originally declared riscv_insn_is_* functions inside
the kprobes implementation. This got moved into a central header in
commit ec5f908775 ("RISC-V: Move riscv_insn_is_* macros into a common header").
Though it looks like I overlooked two of them, so fix that. FENCE itself is
an instruction defined directly by its own opcode, while the created
riscv_isn_is_system function covers all instructions defined under the SYSTEM
opcode.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230113211955.3534431-1-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
[Why]
drm_atomic_normalize_zpos() can return an error code when there's
modeset lock contention. This was being ignored.
[How]
Bail out of atomic check if normalize_zpos() returns an error.
Fixes: b261509952 ("drm/amd/display: Fix double cursor on non-video RGB MPO")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why&How]
Temporarily disable SubVP+DRR since Xorg has an architectural limitation
where freesync will not work in a multi monitor configuration. SubVP+DRR
requires that freesync be working.
Whether OS has variable refresh setting enabled or not, the state on
the crtc remains same unless an application requests VRR. Due to this,
there is no way to know whether freesync will actually work or not
while we are on the desktop from the kernel's perspective.
If userspace does not have a limitation with multi-display freesync (for
example wayland), then this feature can be enabled by adding a
dcfeaturemask option to amdgpu on the kernel cmdline like:
amdgpu.dcfeaturemask=0x200
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_atomic_normalize_zpos() can return an error code when there's
modeset lock contention. This was being ignored.
[How]
Bail out of atomic check if normalize_zpos() returns an error.
Fixes: b261509952 ("drm/amd/display: Fix double cursor on non-video RGB MPO")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building on OpenBSD/arm64 with clang 15, unaligned access
warnings are seen when a union is embedded inside a packed struct.
drm/amd/pm/powerplay/hwmgr/vega20_pptable.h:136:17: error: field
smcPPTable within 'struct _ATOM_VEGA20_POWERPLAYTABLE' is less aligned
than 'PPTable_t' and is usually due to
'struct _ATOM_VEGA20_POWERPLAYTABLE' being packed, which can lead to
unaligned accesses [-Werror,-Wunaligned-access]
PPTable_t smcPPTable;
^
Make PPTable_t packed to avoid this.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building on OpenBSD/arm64 with clang 15, unaligned access
warnings are seen when a union is embedded inside a packed struct.
drm/amd/display/dmub/inc/dmub_cmd.h:941:18: error: field
cursor_copy_src within 'struct dmub_rb_cmd_mall' is less aligned than
'union dmub_addr' and is usually due to 'struct dmub_rb_cmd_mall'
being packed, which can lead to unaligned accesses
[-Werror,-Wunaligned-access]
union dmub_addr cursor_copy_src; /**< Cursor copy address */
^
drm/amd/display/dmub/inc/dmub_cmd.h:942:18: error: field cursor_copy_dst
within 'struct dmub_rb_cmd_mall' is less aligned than
'union dmub_addr' and is usually due to 'struct dmub_rb_cmd_mall'
being packed, which can lead to unaligned accesses
[-Werror,-Wunaligned-access]
union dmub_addr cursor_copy_dst; /**< Cursor copy destination */
^
Add pragma pack around dmub_addr to avoid this.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove duplicate or repeating expressions in the if condition
evaluation. Issue identified using doubletest.cocci Coccinelle semantic
patch.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Saeed Mahameed says:
====================
mlx5-updates-2023-02-10
1) From Roi and Mark: MultiPort eswitch support
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort Eswitch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic
2.1) Cleanups related to mlx5's devlink port logic
2.2) Move devlink port registration to be done before netdev alloc
2.3) Create auxdev devlink instance in the same ns as parent devlink
2.4) Suspend auxiliary devices only in case of PCI device suspend
* tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Suspend auxiliary devices only in case of PCI device suspend
net/mlx5: Remove "recovery" arg from mlx5_load_one() function
net/mlx5e: Create auxdev devlink instance in the same ns as parent devlink
net/mlx5e: Move devlink port registration to be done before netdev alloc
net/mlx5e: Move dl_port to struct mlx5e_dev
net/mlx5e: Replace usage of mlx5e_devlink_get_dl_port() by netdev->devlink_port
net/mlx5e: Pass mdev to mlx5e_devlink_port_register()
net/mlx5: Remove outdated comment
net/mlx5e: TC, Remove redundant parse_attr argument
net/mlx5e: Use a simpler comparison for uplink rep
net/mlx5: Lag, Add single RDMA device in multiport mode
net/mlx5: Lag, set different uplink vport metadata in multiport eswitch mode
net/mlx5: E-Switch, rename bond update function to be reused
net/mlx5e: TC, Add peer flow in mpesw mode
net/mlx5: Lag, Control MultiPort E-Switch single FDB mode
====================
Link: https://lore.kernel.org/r/20230214221239.159033-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove duplicate or repeating expressions in the if condition
evaluation. Issue identified using doubletest.cocci Coccinelle semantic
patch.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make variables declaration inside ifdef guard, as they are only used
inside the same ifdef guard. This remove some of the
-Wunused-but-set-variable warning.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove arguments present on kernel-doc that are not present on the
function declaration and add the new ones if present.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add includes that were previously missing to reduce the number of
-Wmissing-prototypes warnings.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function prototypes to headers to reduce the number of
-Wmissing-prototypes warnings.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function prototypes to headers to reduce the number of
-Wmissing-prototypes warnings.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Turn global functions that are only used locally into static ones. This
reduces the number of -Wmissing-prototypes warnings.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function resource_validate_ctx_update_pointer_after_copy() is
declared in resource.h but never defined, therefore, remove its
declaration from headers.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In mod_color_calculate_{degamma/regamma}_params(), a tf variable is
initialized as TRANSFER_FUNCTION_SRGB but tf is only used after tf =
input->tf, therefore, better to just remove this initial value and avoid
misleading interpretations.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- Move domain power control to DMCUB for DCN314
- Enable P-state validation check for DCN314
- Add support for multiple overlay planes
- Fixes in prefetch, k1 k2 divider programming and more
- Code cleanup
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-02-14 (ixgbe, i40e)
This series contains updates to ixgbe and i40e drivers.
Jason Xing corrects comparison of frame sizes for setting MTU with XDP on
ixgbe and adjusts frame size to account for a second VLAN header on ixgbe
and i40e.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: add double of VLAN header when computing the max MTU
i40e: add double of VLAN header when computing the max MTU
ixgbe: allow to increase MTU to 3K with XDP enabled
====================
Link: https://lore.kernel.org/r/20230214185146.1305819-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function has many conditions and all code style issues (identation,
missing braces, etc.) make reading it really annoying.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Moshe Shemesh says:
====================
devlink: cleanups and move devlink health functionality to separate file
This patchset moves devlink health callbacks, helpers and related code
from leftover.c to new file health.c. About 1.3K LoC are moved by this
patchset, covering all devlink health functionality.
In addition this patchset includes a couple of small cleanups in devlink
health code and documentation update.
====================
Link: https://lore.kernel.org/r/1676392686-405892-1-git-send-email-moshe@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a bug in trace point definition for devlink health report, as
TP_STRUCT_entry of reporter_name should get reporter_name and not msg.
Note no fixes tag as this is a harmless bug as both reporter_name and
msg are strings and TP_fast_assign for this entry is correct.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update devlink-health.rst file:
- Add devlink formatted message (fmsg) API documentation.
- Add auto-dump as a condition to do dump once error reported.
- Expand OOB to clarify this acronym.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that all devlink health callbacks and related code are in file
health.c move common health functions and devlink_health_reporter struct
to be local in health.c file.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move devlink health report test callback from leftover.c to health.c. No
functional change in this patch.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move devlink health report dump callbacks and related code from
leftover.c to health.c. No functional change in this patch.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devlink fmsg (formatted message) is used by devlink health diagnose,
dump and drivers which support these devlink health callbacks.
Therefore, move devlink fmsg helpers and related code to file health.c.
Move devlink health diagnose to file health.c. No functional change in
this patch.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move devlink health report helper and recover callback and related code
from leftover.c to health.c. No functional change in this patch.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move devlink health get and set callbacks and related code from
leftover.c to health.c. No functional change in this patch.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
