In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
It was tested on riscv64 only.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
It was tested in arm, thumb1 and thumb2 modes.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested on s390 both with environ inherited from
_start and extracted from envp.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested on riscv64 both with environ inherited from
_start and extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested with mips24kc (BE) both with environ inherited
from _start and extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested in arm and thumb1 and thumb2 modes, and for each
mode, both with environ inherited from _start and extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested both with environ inherited from _start and
extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested both with environ inherited from _start and
extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested both with environ inherited from _start and
extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Till now errno was declared static so that it could be eliminated if
unused. While the goal is commendable for tiny executables as it allows
to eliminate any data and bss segments when not used, this comes with
some limitations, one of which being that the errno symbol seen in
different units are not the same. Even though this has never been a
real issue given the nature of the programs involved till now, it
happens that referencing the same symbol from multiple units can also
be achieved using weak symbols, with a difference being that only one
of them will be used for all of them. Compared to weak symbols, static
basically have no benefit for regular programs since there are always
at least a few variables in most of these, so the bss segment cannot
be eliminated. E.g:
$ size nolibc-test-static-errno
text data bss dec hex filename
11531 0 48 11579 2d3b nolibc-test-static-errno
Furthermore, the weak symbol doesn't use bss storage at all, resulting
in a slightly section:
$ size nolibc-test-weak-errno
text data bss dec hex filename
11531 0 40 11571 2d33 nolibc-test-weak-errno
This patch thus converts errno from static to weak.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The historic nolibc code did not include asm/fcntl.h and had to define
the various O_RDWR etc macros in each arch-specific file (since such
values differ between certain archs). This was found at least once to
induce bugs due to wrong definitions. Let's get rid of all of them and
include asm/nolibc.h from sys.h instead. This was verified to work
properly on all supported architectures.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In Thumb mode, register r7 is normally used to store the frame pointer.
By default when optimizing at -Os there's no frame pointer so this works
fine. But if no optimization is set, then build errors occur, indicating
that r7 cannot not be used. It's difficult to cheat because it's the
compiler that is complaining, not the assembler, so it's not even possible
to report that the register was clobbered. The solution consists in saving
and restoring r7 around the syscall, but this slightly inflates the code.
The syscall number is passed via r6 which is never used by syscalls.
The current patch adds a few macroes which do that only in Thumb mode,
and which continue to directly assign the syscall number to register r7
in ARM mode. Now this always builds and works for all modes (tested on
Arm, Thumbv1, Thumbv2 modes, at -Os, -O0, -O0 -fomit-frame-pointer).
The code is very slightly inflated in thumb-mode without frame-pointers
compared to previously (e.g. 7928 vs 7864 bytes for nolibc-test) but at
least it's always operational. And it's possible to disable this mechanism
by setting NOLIBC_OMIT_FRAME_POINTER.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Passing -mthumb to the kernel.org arm toolchain failed to build because it
defaults to armv5 hence thumb1, which has a fairly limited instruction set
compared to thumb2 enabled with armv7 that is much more complete. It's not
very difficult to adjust the instructions to also build on thumb1, it only
adds a total of 3 instructions, so it's worth doing it at least to ease use
by casual testers. It was verified that the adjusted code now builds and
works fine for armv5, thumb1, armv7 and thumb2, as long as frame pointers
are not used.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The out-of-block asm() statement carrying _start does not allow the
compiler to know what section the assembly code is being emitted to,
and there's no easy way to push/pop the current section and restore
it. It sometimes causes issues depending on the include files ordering
and compiler optimizations. For example if a variable is declared
immediately before the asm() block and another one after, the compiler
assumes that the current section is still .bss and doesn't re-emit it,
making the second variable appear inside the .text section instead.
Forcing .bss at the end of the _start block doesn't work either because
at certain optimizations the compiler may reorder blocks and will make
some real code appear just after this block.
A significant number of solutions were attempted, but many of them were
still sensitive to section reordering. In the end, the best way to make
sure the compiler and assembler agree on the current section is to place
this code inside a function. Here the function is directly called _start
and configured not to emit a frame-pointer, hence to have no prologue.
If some future architectures would still emit some prologue, another
working approach consists in naming the function differently and placing
the _start label inside the asm statement. But the current solution is
simpler.
It was tested with nolibc-test at -O,-O0,-O2,-O3,-Os for arm,arm64,i386,
mips,riscv,s390 and x86_64.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In 746bd29e34 ("perf build: Use tools/lib headers from install
path") we stopped having the tools/lib/ directory from the kernel
sources in the header include path unconditionally, which breaks the
build on systems with older versions of libbpf-devel, in this case 0.7.0
as some of the structures and function declarations present in the newer
version of libbpf included in the kernel sources (tools/lib/bpf) are not
anymore used, just the ones in the system libbpf.
So instead of trying to provide alternative functions when the
libbpf-bpf_program__set_insns feature test fails, fail a
LIBBPF_DYNAMIC=1 build (requesting the use of the system's libbpf) and
emit this build error message:
$ make LIBBPF_DYNAMIC=1 -C tools/perf
Makefile.config:593: *** Error: libbpf devel library needs to be >= 0.8.0 to build with LIBBPF_DYNAMIC, update or build statically with the version that comes with the kernel sources. Stop.
$
For v6.3 these tests will be revamped and we'll require libbpf 1.0 as a
minimal version for using LIBBPF_DYNAMIC=1, most distros should have it
by now or at v6.3 time.
Fixes: 746bd29e34 ("perf build: Use tools/lib headers from install path")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/CAP-5=fVa51_URGsdDFVTzpyGmdDRj_Dj2EKPuDHNQ0BYgMSzUA@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While doing 'make -C tools/perf build-test' one can notice error
messages while trying to install libtraceevent plugins, stop doing that
as libtraceevent isn't anymore a homie.
These are the warnings dealt with:
make_install_prefix_slash_O: make install prefix=/tmp/krava/
failed to find: /tmp/krava/etc/bash_completion.d/perf
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_cfg80211.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_scsi.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_xen.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_function.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_sched_switch.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_mac80211.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kvm.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kmem.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_hrtimer.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_jbd2.so
Fixes: 4171925aa9 ("tools lib traceevent: Remove libtraceevent")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/Y7xXz+TSpiCbQGjw@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use 'set -e' and an exit handler to stop the script if a command fails
and ensure the test environment is cleaned up in any case. Also, handle
the case where the script is interrupted by SIGINT.
The only command that's expected to fail is 'wait $ping_pid', since
it's killed by the script. Handle this case with '|| true' to make it
play well with 'set -e'.
Finally, return the Kselftest SKIP code (4) when the script breaks
because of an environment problem or a command line failure. The 0 and
1 return codes should now reliably indicate that all tests have been
run (0: all tests run and passed, 1: all tests run but at least one
failed, 4: test script didn't run completely).
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This selftest currently runs half in the current namespace and half in
a netns of its own. Therefore, the test can fail if the current
namespace is already configured with incompatible parameters (for
example if it already has a veth0 interface).
Adapt the script to put both ends of the veth pair in their own netns.
Now veth0 is created in NS0 instead of the current namespace, while
veth1 is set up in NS1 (instead of the 'testing' netns).
The user visible netns names are randomised to minimise the risk of
conflicts with already existing namespaces. The cleanup() function
doesn't need to remove the virtual interface anymore: deleting NS0 and
NS1 automatically removes the virtual interfaces they contained.
We can remove $ns, which was only used to run ip commands in the
'testing' netns (let's use the builtin "-netns" option instead).
However, we still need a similar functionality as ping and tcpdump
now need to run in NS0. So we now have $RUN_NS0 for that.
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ping command can run before DAD completes. In that case, ping may
fail and break the selftest.
We don't need DAD here since we're working on isolated device pairs.
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the required values to identify_qemu() and
identify_bootimage().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When RISCV port was imported in 5.2, the O_* macros were taken with
their octal value and written as-is in hex, resulting in the getdents64()
to fail in nolibc-test.
Fixes: 582e84f7b7 ("tool headers nolibc: add RISCV support") #5.2
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Use arch-x86_64 as a template. Not really different, but
we have our own mmap syscall which takes a structure instead
of discrete arguments.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When building on ARM in thumb mode with gcc-11.3 at -O2 or -O3,
nolibc-test segfaults during the select() tests. It turns out that at
this level, gcc recognizes an opportunity for using memset() to zero
the fd_set, but it miscompiles it because it also recognizes a memset
pattern as well, and decides to call memset() from the memset() code:
000122bc <memset>:
122bc: b510 push {r4, lr}
122be: 0004 movs r4, r0
122c0: 2a00 cmp r2, #0
122c2: d003 beq.n 122cc <memset+0x10>
122c4: 23ff movs r3, #255 ; 0xff
122c6: 4019 ands r1, r3
122c8: f7ff fff8 bl 122bc <memset>
122cc: 0020 movs r0, r4
122ce: bd10 pop {r4, pc}
Simply placing an empty asm() statement inside the loop suffices to
avoid this.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
After the nolibc includes were split to facilitate portability from
standard libcs, programs that include only what they need may miss
some symbols which are needed by libgcc. This is the case for raise()
which is needed by the divide by zero code in some architectures for
example.
Regardless, being able to include only the apparently needed files is
convenient.
Instead of trying to move all exported definitions to a single file,
since this can change over time, this patch takes another approach
consisting in including the nolibc header at the end of all standard
include files. This way their types and functions are already known
at the moment of inclusion, and including any single one of them is
sufficient to bring all the required ones.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Depending on the compiler used and the optimization options, the sbrk()
test was crashing, both on real hardware (mips-24kc) and in qemu. One
such example is kernel.org toolchain in version 11.3 optimizing at -Os.
Inspecting the sys_brk() call shows the following code:
0040047c <sys_brk>:
40047c: 24020fcd li v0,4045
400480: 27bdffe0 addiu sp,sp,-32
400484: 0000000c syscall
400488: 27bd0020 addiu sp,sp,32
40048c: 10e00001 beqz a3,400494 <sys_brk+0x18>
400490: 00021023 negu v0,v0
400494: 03e00008 jr ra
It is obviously wrong, the "negu" instruction is placed in beqz's
delayed slot, and worse, there's no nop nor instruction after the
return, so the next function's first instruction (addiu sip,sip,-32)
will also be executed as part of the delayed slot that follows the
return.
This is caused by the ".set noreorder" directive in the _start block,
that applies to the whole program. The compiler emits code without the
delayed slots and relies on the compiler to swap instructions when this
option is not set. Removing the option would require to change the
startup code in a way that wouldn't make it look like the resulting
code, which would not be easy to debug. Instead let's just save the
default ordering before changing it, and restore it at the end of the
_start block. Now the code is correct:
0040047c <sys_brk>:
40047c: 24020fcd li v0,4045
400480: 27bdffe0 addiu sp,sp,-32
400484: 0000000c syscall
400488: 10e00002 beqz a3,400494 <sys_brk+0x18>
40048c: 27bd0020 addiu sp,sp,32
400490: 00021023 negu v0,v0
400494: 03e00008 jr ra
400498: 00000000 nop
Fixes: 66b6f755ad ("rcutorture: Import a copy of nolibc") #5.0
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The mode field has the type encoded as an value in a field, not as a bit
mask. Mask the mode with S_IFMT instead of each type to test. Otherwise,
false positives are possible: eg S_ISDIR will return true for block
devices because S_IFDIR = 0040000 and S_IFBLK = 0060000 since mode is
masked with S_IFDIR instead of S_IFMT. These macros now match the
similar definitions in tools/include/uapi/linux/stat.h.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kernel uses unsigned long for the fd_set bitmap,
but nolibc use u32. This works fine on little endian
machines, but fails on big endian. Convert to unsigned
long to fix this.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Hand-written asm often contains non-function symbols in executable
sections. _end symbols for finding the size of instruction blocks
for runtime processing is one such usage.
optprobe_template_end is one example that causes the warning:
objtool: optprobe_template_end(): can't find starting instruction
This is because the symbol happens to be at the end of the file (and
therefore end of a section in the object file).
So ignore end-of-section STT_NOTYPE symbols instead of bailing out
because an instruction can't be found. While we're here, add a more
descriptive warning for STT_FUNC symbols found at the end of a
section.
[ This also solves a PowerPC regression reported by Sathvika Vasireddy. ]
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reported-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Sathvika Vasireddy <sv@linux.ibm.com>
Link: https://lore.kernel.org/r/20221220101323.3119939-1-npiggin@gmail.com
While running 'perf test' for bpf, observed that "BPF prologue
generation" test case fails to compile with clang. Logs below from
powerpc:
<stdin>:33:2: error: use of undeclared identifier 'fmode_t'
fmode_t f_mode = (fmode_t)_f_mode;
^
<stdin>:37:6: error: use of undeclared identifier 'f_mode'; did you mean '_f_mode'?
if (f_mode & FMODE_WRITE)
^~~~~~
_f_mode
<stdin>:30:60: note: '_f_mode' declared here
int bpf_func__null_lseek(void *ctx, int err, unsigned long _f_mode,
^
2 errors generated.
The test code tests/bpf-script-test-prologue.c uses fmode_t. And the
error above is for "fmode_t" which is defined in include/linux/types.h
as part of kernel build directory: "/lib/modules/<kernel_version>/build"
that comes from kernel devel [ soft link to /usr/src/<kernel_version> ].
Clang picks this header file from "-working-directory" build option that
specifies this build folder.
But the commit 14e4b9f428 ("perf trace: Raw augmented syscalls fix
libbpf 1.0+ compatibility") changed the include directory to use:
"/usr/include".
Post this change, types.h from /usr/include/ is getting picked upwhich
doesn’t contain definition of "fmode_t" and hence fails to compile.
Compilation command before this commit:
/usr/bin/clang -D__KERNEL__ -D__NR_CPUS__=72 -DLINUX_VERSION_CODE=0x50e00 -xc -I/root/lib/perf/include/bpf -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -Wno-unused-value -Wno-pointer-sign -working-directory /lib/modules/<ver>/build -c - -target bpf -g -O2 -o -
Compilation command after this commit:
/usr/bin/clang -D__KERNEL__ -D__NR_CPUS__=72 -DLINUX_VERSION_CODE=0x50e00 -xc -I/usr/include/ -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -Wno-unused-value -Wno-pointer-sign -working-directory /lib/modules/<ver>/build -c - -target bpf -g -O2 -o -
The difference is addition of -I/usr/include/ in the first line which
is causing the error. Fix this by adding typedef for "fmode_t" in the
testcase to solve the compile issue.
Fixes: 14e4b9f428 ("perf trace: Raw augmented syscalls fix libbpf 1.0+ compatibility")
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/20230105120436.92051-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adjust size parameter in connect() to match the type of the parameter, to
fix "No such file or directory" error in selftests/net/af_unix/
test_oob_unix.c:127.
The existing code happens to work provided that the autogenerated pathname
is shorter than sizeof (struct sockaddr), which is why it hasn't been
noticed earlier.
Visible from the trace excerpt:
bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060
[pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory)
BUG: The filename is trimmed to sizeof (struct sockaddr).
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Fixes: 314001f0bf ("af_unix: Add OOB support")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the function chk_msk_inuse() to diag.sh, which is used to check the
statistics of mptcp socket in use. As mptcp socket in listen state will
be closed randomly after 'accept', we need to get the count of listening
mptcp socket through 'ss' command.
All tests pass.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For now, mptcp_connect won't exit after receiving the 'SIGUSR1' signal
if '-r' is set. Fix this by skipping poll and sleep in copyfd_io_poll()
if 'quit' is set.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.
One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages
Fixes: 3a80a7fa79 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Pull memblock fixes from Mike Rapoport:
"Small fixes in kernel-doc and tests:
- Fix kernel-doc for memblock_phys_free() to use correct names for
the counterpart allocation methods
- Fix compilation error in memblock tests"
* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Fix doc for memblock_phys_free
memblock tests: Fix compilation error.
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix segfault when trying to process tracepoints present in a
perf.data file and not linked with libtraceevent.
- Fix build on uClibc systems by adding missing sys/types.h include,
that was being obtained indirectly which stopped being the case when
tools/lib/traceevent was removed.
- Don't show commands in 'perf help' that depend on linking with
libtraceevent when not building with that library, which is now a
possibility since we no longer ship a copy in tools/lib/traceevent.
- Fix failure in 'perf test' entry testing the combination of 'perf
probe' user space function + 'perf record' + 'perf script' where it
expects a backtrace leading to glibc's inet_pton() from 'ping' that
now happens more than once with glibc 2.35 for IPv6 addreses.
- Fix for the inet_pton perf test on s/390 where
'text_to_binary_address' now appears on the backtrace.
- Fix build error on riscv due to missing header for 'struct
perf_sample'.
- Fix 'make -C tools perf_install' install variant by not propagating
the 'subdir' to submakes for the 'install_headers' targets.
- Fix handling of unsupported cgroup events when using BPF counters in
'perf stat'.
- Count all cgroups, not just the last one when using 'perf stat' and
combining --for-each-cgroup with --bpf-counters.
This makes the output using BPF counters match the output without
using it, which was the intention all along, the output should be the
same using --bpf-counters or not.
- Fix 'perf lock contention' core dump related to not finding the
"__sched_text_end" symbol on s/390.
- Fix build failure when HEAD is signed: exclude the signature from the
version string.
- Add missing closedir() calls to in perf_data__open_dir(), plugging a
fd leak.
* tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Fix build on uClibc systems by adding missing sys/types.h include
perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
perf stat: Fix handling of unsupported cgroup events when using BPF counters
perf test record_probe_libc_inet_pton: Fix test on s/390 where 'text_to_binary_address' now appears on the backtrace
perf lock contention: Fix core dump related to not finding the "__sched_text_end" symbol on s/390
perf build: Don't propagate subdir to submakes for install_headers
perf test record_probe_libc_inet_pton: Fix failure due to extra inet_pton() backtrace in glibc >= 2.35
perf tools: Fix segfault when trying to process tracepoints in perf.data and not linked with libtraceevent
perf tools: Don't include signature in version strings
perf help: Use HAVE_LIBTRACEEVENT to filter out unsupported commands
perf tools riscv: Fix build error on riscv due to missing header for 'struct perf_sample'
perf tools: Fix resources leak in perf_data__open_dir()
The cxl_test machinery builds modified versions of the modules in
drivers/cxl/ and intercepts some of their calls to allow cxl_test to
inject mock CXL topologies for test.
However, if cxl_test attempts the same with production modules,
fireworks ensue as Luis discovered [1]. Prevent that scenario by
arranging for cxl_test to check for a "watermark" symbol in each of the
modules it expects to be modified before the test can run. This turns
undefined runtime behavior or crashes into a safer failure to load the
cxl_test module.
Link: http://lore.kernel.org/r/20221209062919.1096779-1-mcgrof@kernel.org [1]
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
