The busy timeout logic checks for the AUX BUSY, then waits for the
timeout period and then after timeout reads the register for BUSY or
Success.
Instead replace interrupt with polling so as to read the AUX CTL
register often before the timeout period. Looks like there might be some
issue with interrupt-on-read. Hence changing the logic to polling read.
v2: replace interrupt with polling read
v3: use usleep_rang instead of msleep, updated commit msg
v4: use intel_wait_for_regiter internal function
v5: use __intel_de_wait_for_register with 500us slow and 10ms fast timeout
v6: check return value of __intel_de_wait_for_register
v7: using default 2us for intel_de_wait_for_register
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221221033209.1284435-1-arun.r.murthy@intel.com
There are 3 possible interrupt sources are handled by DP controller,
HPDstatus, Controller state changes and Aux read/write transaction.
At every irq, DP controller have to check isr status of every interrupt
sources and service the interrupt if its isr status bits shows interrupts
are pending. There is potential race condition may happen at current aux
isr handler implementation since it is always complete dp_aux_cmd_fifo_tx()
even irq is not for aux read or write transaction. This may cause aux read
transaction return premature if host aux data read is in the middle of
waiting for sink to complete transferring data to host while irq happen.
This will cause host's receiving buffer contains unexpected data. This
patch fixes this problem by checking aux isr and return immediately at
aux isr handler if there are no any isr status bits set.
Current there is a bug report regrading eDP edid corruption happen during
system booting up. After lengthy debugging to found that VIDEO_READY
interrupt was continuously firing during system booting up which cause
dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data
from aux hardware buffer which is not yet contains complete data transfer
from sink. This cause edid corruption.
Follows are the signature at kernel logs when problem happen,
EDID has corrupt header
panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID
Changes in v2:
-- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr()
-- add more commit text
Changes in v3:
-- add Stephen suggested
-- dp_aux_isr() return IRQ_XXX back to caller
-- dp_ctrl_isr() return IRQ_XXX back to caller
Changes in v4:
-- split into two patches
Changes in v5:
-- delete empty line between tags
Changes in v6:
-- remove extra "that" and fixed line more than 75 char at commit text
Fixes: c943b4948b ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516121/
Link: https://lore.kernel.org/r/1672193785-11003-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Fix all kernel-doc warnings in dc/core/dc.c:
dc.c:385: warning: missing initial short description on line:
* dc_stream_adjust_vmin_vmax:
dc.c:392: warning: contents before sections
dc.c:399: warning: No description found for return value of 'dc_stream_adjust_vmin_vmax'
dc.c:434: warning: Excess function parameter 'adjust' description in 'dc_stream_get_last_used_drr_vtotal'
dc.c:434: warning: No description found for return value of 'dc_stream_get_last_used_drr_vtotal'
dc.c:574: warning: No description found for return value of 'dc_stream_configure_crc'
dc.c:1746: warning: No description found for return value of 'dc_commit_state_no_check'
dc.c:4991: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* dc_extended_blank_supported 0 Decide whether extended blank is supported
dc.c:4991: warning: missing initial short description on line:
* dc_extended_blank_supported 0 Decide whether extended blank is supported
dc.c:4723: warning: Function parameter or member 'dc' not described in 'dc_enable_dmub_outbox'
dc.c:4926: warning: Function parameter or member 'dc' not described in 'dc_process_dmub_dpia_hpd_int_enable'
dc.c:4926: warning: Function parameter or member 'hpd_int_enable' not described in 'dc_process_dmub_dpia_hpd_int_enable'
12 warnings
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We skip dsc_validation on pipes that are underlays, but in the
acquire_dsc code we don't have this check.
In certain conditions (when underlay pipe index is lower) we will assign
the dsc resource to the underlay pipe and skip the base pipe.
Now during dsc_validation we will skip the underlay pipe (this has the
dsc resource) but try to validate the base pipe(this doesn't have a dsc
resource) due to this mismatch we hit a NULLPTR
[How]
In the acquire_dsc add a check for underlay pipe so we
don't acquire a dsc resource for this pipe. This will match the
acquire/validation conditions.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Hersen Wu <Hersenxs.Wu@amd.com>
Acked-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFX 11.0.3, Due to security policy, there is no way to check UcFatalEn
field of UMCCH0_0_GeccCtrl to identify UMC poison mode. This is workaround
force set umc poison mode as 1 for GFX 11.0.3
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
By moving bw_ctx field to the end of the dc_state the state can be
cleared more efficiently without resulting in large DML memcpy
operations, resulting in better mode enumeration performance on some
platforms.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
ignore_msa_timing_param is used by SubVP logic to determine if SubVP
+ DRR is possible. Linux does not support freesync on multi display
config, which results in incorrect assumption of VRR support if we
set this parameter when VRR is supported, but not enabled.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
During DP2.1 LL CTS if test equipment requests to change between
DP2.1 and DP1.4 link rates, we need to swap between HPO and DIO
encoders by remapping encoder resource.
[how]
Add a function dc resource to update encoder resources and toggle
dpms state for all enabled stream associated witht the link under test.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Pixel rate div depends on the type of encoder
that we are enabling stream with. If we swap between
HPO and DIO encoder at the time we call enable stream
for the new encoder, we must reprogram pixel rate div
based on the new encoder type.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On some monitors we see a brief flash of corruption during the
monitor disable sequence caused by FIFO being disabled in the middle
of an active DP stream.
[How]
Wait until DP vid stream is disabled before turning off the FIFO.
The FIFO reset on DP unblank should take care of clearing any FIFO
error, if any.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN301 resource function is missing function pointer to
handle cases with unknown plane state.
This causes assertion when global state is validated while
using swizzle parameter as “DC_UNKNOWN”
[How]
Add function pointer to handle and patch cases when plane
state is unknown.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com>
Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Proper phantom pipe disable sequence was missing in
commit_planes_for_stream
- If disabling phantom pipe, turn on phantom OTG first, and turn
off the phantom OTG after the plane is disabled
- Also update sequence for enabling / disabling phantom streams
(apply_ctx_to_hw). When enabling phantom pipes, enable before
doing front end programming for phantom pipes. If disabling
phantom pipes, disable after front end programming (i.e. after
phantom plane disable)
- TODO: Still need to properly handle transition case when a phantom
pipe is transitioned directly into a real pipe (need to fully disable
the phantom pipe first)
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
- Need error message when failing to allocating secure_display_ctx.
- Need to check if secure display context in psp is initialized or not
before using it.
[How]
- Add error message when memory allocation fail.
- Add check before accessing psp secure display context.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SwathSizePerSurfaceY[] and SwathSizePerSurfaceC[] values are uninitialized
because we are using += instead of = operator.
[How]
Assign values in loop with = operator.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
multiple display hdcp are enabled within event_property_validate,
event_property_update by looping all displays on mst hub. when
one of display on mst hub in unplugged or disabled, hdcp are
disabled for all displays on mst hub within hdcp_reset_display
by looping all displays of mst link. for displays still active,
their encryption status are off. kernel driver will not run hdcp
authentication again. therefore, hdcp are not enabled automatically.
[How]
within is_content_protection_different, check drm_crtc_state changes
of all displays on mst hub, if need, triger hdcp_update_display to
re-run hdcp authentication.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename vram_scratch into mem_scratch and allow allocating it into GTT as
well.
The only problem with that is that we won't have a default page for the
system aperture any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Drop soft reset check when do should recover gpu check.
(As it will skip gpu reset operation if some ip is hang but
not support soft reset)
2.Check soft reset status before do soft reset when pre asic reset.
a. If check soft reset return true, it means: some ip is hang and
it also support soft reset, will try soft reset first.
b. If check soft reset return false, it means:
I. All the ip are not hang, will skip gpu reset.
II. Some ip is hang but not support soft reset, will skip soft
reset and retry with full reset later.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DRM helper drm_fb_build_fourcc_list() creates a list of color
formats for primary planes of the generic drivers. Simplify the helper:
- It used to mix and filter native and emulated formats as provided
by the driver. Now the only emulated format is XRGB8888, which is
required as fallback by legacy software. Drop support for emulating
any other formats.
- Also convert alpha formats to their non-alpha counterparts. Generic
drivers don't support primary planes with alpha formats and some
DTs incorrectly advertise alpha channels for non-alpha hardware. So
only export non-alpha formats for primary planes.
With the simplified helper, scrap format lists of the affected generic
drivers. All they need is the firmware buffer's native format, from which
the helper creates the list of color formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-13-tzimmermann@suse.de
Fix the color-format selection of the single-probe helper. Go
through all user-specified values and test each for compatibility
with the driver. If none is supported, use the driver-provided
default. This guarantees that the console is always available in
any color format at least.
Until now, the format selection of the single-probe helper tried
to either use a user-specified format or a 32-bit default format.
If the user-specified format was not supported by the driver, the
selection failed and the display remained blank.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-12-tzimmermann@suse.de
Add conversion from XRGB8888 to XRGB1555, ARGB1555 and RGBA5551, which
are the formats currently supported by the simplefb infrastructure. The
new helpers allow the output of XRGB8888 framebuffers to firmware
scanout buffers in one of the 15-bit formats.
v3:
* use __le* for destination buffers (Jose, kernel test robot)
v2:
* test 15-bit results with local endianness (Jose)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-10-tzimmermann@suse.de
Upcoming changes to the format conversion will mostly blit from
XRGB8888 to some other format. So put the source format in blit's
outer branches to make the code more readable. For cases where
a format only changes its endianness, such as XRGB565, introduce
dedicated branches that handle this for all formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-7-tzimmermann@suse.de
The drm_sched_entity_kill() is invoked twice by drm_sched_entity_destroy()
while userspace process is exiting or being killed. First time it's invoked
when sched entity is flushed and second time when entity is released. This
causes a lockup within wait_for_completion(entity_idle) due to how completion
API works.
Calling wait_for_completion() more times than complete() was invoked is a
error condition that causes lockup because completion internally uses
counter for complete/wait calls. The complete_all() must be used instead
in such cases.
This patch fixes lockup of Panfrost driver that is reproducible by killing
any application in a middle of 3d drawing operation.
Fixes: 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://patchwork.freedesktop.org/patch/msgid/20221123001303.533968-1-dmitry.osipenko@collabora.com
drm-misc-next for 6.2:
Cross-subsystem Changes:
- fbdev: Make fb_modesetting_disabled() static
- udmabuf: Add vmap and vunmap methods to udmabuf_ops
Core Changes:
- doc: make drm-uapi igt-tests more readable
- fb-helper: Revert of the damage worker removal
- fourcc: Add missing big-endian XRGB1555 and RGB565 formats
- gem-shmem: Fix for resource leakage in __drm_gem_shmem_create()
- scheduler: Fix lockup in drm_sched_entity_kill()
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221124074615.ahflw5q5ktfdsr7k@houat
