Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
Pull runtime verification updates from Steven Rostedt:
- Refactor da_monitor header to share handlers across monitor types
No functional changes, only less code duplication.
- Add Hybrid Automata model class
Add a new model class that extends deterministic automata by adding
constraints on transitions and states. Those constraints can take
into account wall-clock time and as such allow RV monitor to make
assertions on real time. Add documentation and code generation
scripts.
- Add stall monitor as hybrid automaton example
Add a monitor that triggers a violation when a task is stalling as an
example of automaton working with real time variables.
- Convert the opid monitor to a hybrid automaton
The opid monitor can be heavily simplified if written as a hybrid
automaton: instead of tracking preempt and interrupt enable/disable
events, it can just run constraints on the preemption/interrupt
states when events like wakeup and need_resched verify.
- Add support for per-object monitors in DA/HA
Allow writing deterministic and hybrid automata monitors for generic
objects (e.g. any struct), by exploiting a hash table where objects
are saved. This allows to track more than just tasks in RV. For
instance it will be used to track deadline entities in deadline
monitors.
- Add deadline tracepoints and move some deadline utilities
Prepare the ground for deadline monitors by defining events and
exporting helpers.
- Add nomiss deadline monitor
Add first example of deadline monitor asserting all entities complete
before their deadline.
- Improve rvgen error handling
Introduce AutomataError exception class and better handle expected
exceptions while showing a backtrace for unexpected ones.
- Improve python code quality in rvgen
Refactor the rvgen generation scripts to align with python best
practices: use f-strings instead of %, use len() instead of
__len__(), remove semicolons, use context managers for file
operations, fix whitespace violations, extract magic strings into
constants, remove unused imports and methods.
- Fix small bugs in rvgen
The generator scripts presented some corner case bugs: logical error
in validating what a correct dot file looks like, fix an isinstance()
check, enforce a dot file has an initial state, fix type annotations
and typos in comments.
- rvgen refactoring
Refactor automata.py to use iterator-based parsing and handle
required arguments directly in argparse.
- Allow epoll in rtapp-sleep monitor
The epoll_wait call is now rt-friendly so it should be allowed in the
sleep monitor as a valid sleep method.
* tag 'trace-rv-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (32 commits)
rv: Allow epoll in rtapp-sleep monitor
rv/rvgen: fix _fill_states() return type annotation
rv/rvgen: fix unbound loop variable warning
rv/rvgen: enforce presence of initial state
rv/rvgen: extract node marker string to class constant
rv/rvgen: fix isinstance check in Variable.expand()
rv/rvgen: make monitor arguments required in rvgen
rv/rvgen: remove unused __get_main_name method
rv/rvgen: remove unused sys import from dot2c
rv/rvgen: refactor automata.py to use iterator-based parsing
rv/rvgen: use class constant for init marker
rv/rvgen: fix DOT file validation logic error
rv/rvgen: fix PEP 8 whitespace violations
rv/rvgen: fix typos in automata and generator docstring and comments
rv/rvgen: use context managers for file operations
rv/rvgen: remove unnecessary semicolons
rv/rvgen: replace __len__() calls with len()
rv/rvgen: replace % string formatting with f-strings
rv/rvgen: remove bare except clauses in generator
rv/rvgen: introduce AutomataError exception class
...
Pull ring-buffer updates from Steven Rostedt:
- Add remote buffers for pKVM
pKVM has a hypervisor component that is used to protect the guest
from the host kernel. This hypervisor is a black box to the kernel as
the kernel is to user space. The remote buffers are used to have a
memory mapping between the hypervisor and the kernel where kernel may
send commands to enable tracing within the hypervisor. Then the
kernel will read this memory mapping just like user space can read
the memory mapped ring buffer of the kernel tracing system.
Since the hypervisor only has a single context, it doesn't need to
worry about races between normal context, interrupt context and NMIs
like the kernel does. The ring buffer it uses doesn't need to be as
complex. The remote buffers are a simple version of the ring buffer
that works in a single context. They are still per-CPU and use sub
buffers. The data layout is the same as the kernel's ring buffer to
share the same parsing.
Currently, only ARM64 implements pKVM, but there's work to implement
it also in x86. The remote buffer code is separated out from the ARM
implementation so that it can be used in the future by x86.
The ARM64 updates for pKVM is in the ARM/KVM tree and it merged in
the remote buffers of this tree.
- Make the backup instance non reusable
The backup instance is a copy of the persistent ring buffer so that
the persistent ring buffer could start recording again without using
the data from the previous boot. The backup isn't for normal tracing.
It is made read-only, and after it is consumed, it is automatically
removed.
- Have backup copy persistent instance before it starts recording
To allow the persistent ring buffer to start recording from the
kernel command line commands, move the copy of the backup instance to
before the the command line options start recording.
- Report header_page overwrite field as "char" and not "int'
The rust parser of the header_page file was triggering a warning when
it defined the overwrite variable as "int" but it was only a single
byte in size.
- Fix memory barriers for the trace_buffer CPU mask
When a CPU comes online, the bit is set to allow readers to know that
the CPU buffer is allocated. The bit is set after the allocation is
done, and a smp_wmb() is performed after the allocation and before
the setting of the bit. But instead of adding a smp_rmb() to all
readers, since once a buffer is created for a CPU it is not deleted
if that CPU goes offline, so this allocation is almost always done at
boot up before any readers exist.
If for the unlikely case where a CPU comes online for the first time
after the system boot has finished, send an IPI to all CPUs to force
the smp_rmb() for each CPU.
- Show clock function being used in debugging ring buffer data
When the ring buffer checks are enabled and the ring buffer detects
an inconsistency in the times of the invents, print out the clock
being used when the error occurred. There was a very hard to hit bug
that would happen every so often and it ended up being only triggered
when the jiffies clock was being used. If the bug showed the clock
being used, it would have been much easier to find the problem (which
was an internal function was being traced which caused the clock
accounting to go off).
* tag 'trace-ringbuffer-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
ring-buffer: Prevent off-by-one array access in ring_buffer_desc_page()
ring-buffer: Report header_page overwrite as char
tracing: Allow backup to save persistent ring buffer before it starts
tracing/Documentation: Add a section about backup instance
tracing: Remove the backup instance automatically after read
tracing: Make the backup instance non-reusable
ring-buffer: Enforce read ordering of trace_buffer cpumask and buffers
ring-buffer: Show what clock function is used on timestamp errors
tracing: Check for undefined symbols in simple_ring_buffer
tracing: load/unload page callbacks for simple_ring_buffer
Documentation: tracing: Add tracing remotes
tracing: selftests: Add trace remote tests
tracing: Add a trace remote module for testing
tracing: Introduce simple_ring_buffer
ring-buffer: Export buffer_data_page and macros
tracing: Add helpers to create trace remote events
tracing: Add events/ root files to trace remotes
tracing: Add events to trace remotes
tracing: Add init callback to trace remotes
tracing: Add non-consuming read to trace remotes
...
Pull ftrace update from Steven Rostedt:
- Speed up ftrace_lookup_symbols() for single lookups
The kallsyms lookup in ftrace_lookup_symbols() does a linear search
over each symbol. This is fine when it must match multiple strings,
but when there's only a single string being searched for, using a
binary search is much more efficient. When a single string is passed
in to search, use the binary search method.
* tag 'ftrace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Use kallsyms binary search for single-symbol lookup
Pull bpf updates from Alexei Starovoitov:
- Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard
Zingerman while Martin KaFai Lau reduced his load to Reviwer.
- Lots of fixes everywhere from many first time contributors. Thank you
All.
- Diff stat is dominated by mechanical split of verifier.c into
multiple components:
- backtrack.c: backtracking logic and jump history
- states.c: state equivalence
- cfg.c: control flow graph, postorder, strongly connected
components
- liveness.c: register and stack liveness
- fixups.c: post-verification passes: instruction patching, dead
code removal, bpf_loop inlining, finalize fastcall
8k line were moved. verifier.c still stands at 20k lines.
Further refactoring is planned for the next release.
- Replace dynamic stack liveness with static stack liveness based on
data flow analysis.
This improved the verification time by 2x for some programs and
equally reduced memory consumption. New logic is in liveness.c and
supported by constant folding in const_fold.c (Eduard Zingerman,
Alexei Starovoitov)
- Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire)
- Use kmalloc_nolock() universally in BPF local storage (Amery Hung)
- Fix several bugs in linked registers delta tracking (Daniel Borkmann)
- Improve verifier support of arena pointers (Emil Tsalapatis)
- Improve verifier tracking of register bounds in min/max and tnum
domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun)
- Further extend support for implicit arguments in the verifier (Ihor
Solodrai)
- Add support for nop,nop5 instruction combo for USDT probes in libbpf
(Jiri Olsa)
- Support merging multiple module BTFs (Josef Bacik)
- Extend applicability of bpf_kptr_xchg (Kaitao Cheng)
- Retire rcu_trace_implies_rcu_gp() (Kumar Kartikeya Dwivedi)
- Support variable offset context access for 'syscall' programs (Kumar
Kartikeya Dwivedi)
- Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta
Yatsenko)
- Fix UAF in in open-coded task_vma iterator (Puranjay Mohan)
* tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits)
selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg
selftests/bpf: Add test for cgroup storage OOB read
bpf: Fix OOB in pcpu_init_value
selftests/bpf: Fix reg_bounds to match new tnum-based refinement
selftests/bpf: Add tests for non-arena/arena operations
bpf: Allow instructions with arena source and non-arena dest registers
bpftool: add missing fsession to the usage and docs of bpftool
docs/bpf: add missing fsession attach type to docs
bpf: add missing fsession to the verifier log
bpf: Move BTF checking logic into check_btf.c
bpf: Move backtracking logic to backtrack.c
bpf: Move state equivalence logic to states.c
bpf: Move check_cfg() into cfg.c
bpf: Move compute_insn_live_regs() into liveness.c
bpf: Move fixup/post-processing logic from verifier.c into fixups.c
bpf: Simplify do_check_insn()
bpf: Move checks for reserved fields out of the main pass
bpf: Delete unused variable
...
Pull timer core updates from Thomas Gleixner:
- A rework of the hrtimer subsystem to reduce the overhead for
frequently armed timers, especially the hrtick scheduler timer:
- Better timer locality decision
- Simplification of the evaluation of the first expiry time by
keeping track of the neighbor timers in the RB-tree by providing
a RB-tree variant with neighbor links. That avoids walking the
RB-tree on removal to find the next expiry time, but even more
important allows to quickly evaluate whether a timer which is
rearmed changes the position in the RB-tree with the modified
expiry time or not. If not, the dequeue/enqueue sequence which
both can end up in rebalancing can be completely avoided.
- Deferred reprogramming of the underlying clock event device. This
optimizes for the situation where a hrtimer callback sets the
need resched bit. In that case the code attempts to defer the
re-programming of the clock event device up to the point where
the scheduler has picked the next task and has the next hrtick
timer armed. In case that there is no immediate reschedule or
soft interrupts have to be handled before reaching the reschedule
point in the interrupt entry code the clock event is reprogrammed
in one of those code paths to prevent that the timer becomes
stale.
- Support for clocksource coupled clockevents
The TSC deadline timer is coupled to the TSC. The next event is
programmed in TSC time. Currently this is done by converting the
CLOCK_MONOTONIC based expiry value into a relative timeout,
converting it into TSC ticks, reading the TSC adding the delta
ticks and writing the deadline MSR.
As the timekeeping core has the conversion factors for the TSC
already, the whole back and forth conversion can be completely
avoided. The timekeeping core calculates the reverse conversion
factors from nanoseconds to TSC ticks and utilizes the base
timestamps of TSC and CLOCK_MONOTONIC which are updated once per
tick. This allows a direct conversion into the TSC deadline value
without reading the time and as a bonus keeps the deadline
conversion in sync with the TSC conversion factors, which are
updated by adjtimex() on systems with NTP/PTP enabled.
- Allow inlining of the clocksource read and clockevent write
functions when they are tiny enough, e.g. on x86 RDTSC and WRMSR.
With all those enhancements in place a hrtick enabled scheduler
provides the same performance as without hrtick. But also other
hrtimer users obviously benefit from these optimizations.
- Robustness improvements and cleanups of historical sins in the
hrtimer and timekeeping code.
- Rewrite of the clocksource watchdog.
The clocksource watchdog code has over time reached the state of an
impenetrable maze of duct tape and staples. The original design,
which was made in the context of systems far smaller than today, is
based on the assumption that the to be monitored clocksource (TSC)
can be trivially compared against a known to be stable clocksource
(HPET/ACPI-PM timer).
Over the years this rather naive approach turned out to have major
flaws. Long delays between the watchdog invocations can cause wrap
arounds of the reference clocksource. The access to the reference
clocksource degrades on large multi-sockets systems dure to
interconnect congestion. This has been addressed with various
heuristics which degraded the accuracy of the watchdog to the point
that it fails to detect actual TSC problems on older hardware which
exposes slow inter CPU drifts due to firmware manipulating the TSC to
hide SMI time.
The rewrite addresses this by:
- Restricting the validation against the reference clocksource to
the boot CPU which is usually closest to the legacy block which
contains the reference clocksource (HPET/ACPI-PM).
- Do a round robin validation betwen the boot CPU and the other
CPUs based only on the TSC with an algorithm similar to the TSC
synchronization code during CPU hotplug.
- Being more leniant versus remote timeouts
- The usual tiny fixes, cleanups and enhancements all over the place
* tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
alarmtimer: Access timerqueue node under lock in suspend
hrtimer: Fix incorrect #endif comment for BITS_PER_LONG check
posix-timers: Fix stale function name in comment
timers: Get this_cpu once while clearing the idle state
clocksource: Rewrite watchdog code completely
clocksource: Don't use non-continuous clocksources as watchdog
x86/tsc: Handle CLOCK_SOURCE_VALID_FOR_HRES correctly
MIPS: Don't select CLOCKSOURCE_WATCHDOG
parisc: Remove unused clocksource flags
hrtimer: Add a helper to retrieve a hrtimer from its timerqueue node
hrtimer: Remove trailing comma after HRTIMER_MAX_CLOCK_BASES
hrtimer: Mark index and clockid of clock base as const
hrtimer: Drop unnecessary pointer indirection in hrtimer_expire_entry event
hrtimer: Drop spurious space in 'enum hrtimer_base_type'
hrtimer: Don't zero-initialize ret in hrtimer_nanosleep()
hrtimer: Remove hrtimer_get_expires_ns()
timekeeping: Mark offsets array as const
timekeeping/auxclock: Consistently use raw timekeeper for tk_setup_internals()
timer_list: Print offset as signed integer
tracing: Use explicit array size instead of sentinel elements in symbol printing
...
As pointed out by Smatch, the ring-buffer descriptor array page_va is
counted by nr_page_va, but the accessor ring_buffer_desc_page() allows
access off by one.
Currently, this does not cause problems, as the page ID always comes
from a trusted source. Nonetheless, ensure robustness and fix the
accessor. While at it, make the page_id unsigned.
Link: https://patch.msgid.link/20260410124527.3563970-1-vdonnefort@google.com
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The header_page tracefs metadata currently reports overwrite as an
int field with size 1. That makes parsers warn about a type and
size mismatch even though the field is only used as a one-byte flag
within commit.
Keep the shared offset with commit as-is, but report overwrite as
char so the declared type matches the hardcoded size. The signedness
is already carried separately by the emitted signed field.
Link: https://patch.msgid.link/20260406165333.46052-1-create0818@163.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216999
Signed-off-by: Cao Ruichuang <create0818@163.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
KVM/arm64 updates for 7.1
* New features:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis.
This comes with a full infrastructure for 'remote' trace buffers
that can be exposed by non-kernel entities such as firmware.
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM.
- Finally add support for pKVM protected guests, with anonymous
memory being used as a backing store. About time!
* Improvements and bug fixes:
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to
the various helpers and rendering a substantial amount of
state immutable.
- Expand the Stage-2 page table dumper to support NV shadow
page tables on a per-VM basis.
- Tidy up the pKVM PSCI proxy code to be slightly less hard
to follow.
- Fix both SPE and TRBE in non-VHE configurations so that they
do not generate spurious, out of context table walks that
ultimately lead to very bad HW lockups.
- A small set of patches fixing the Stage-2 MMU freeing in error
cases.
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls.
- The usual cleanups and other selftest churn.
When an unqualified kprobe target exists in both vmlinux and a loaded
module, number_of_same_symbols() returns a count greater than 1,
causing kprobe attachment to fail with -EADDRNOTAVAIL even though the
vmlinux symbol is unambiguous.
When no module qualifier is given and the symbol is found in vmlinux,
return the vmlinux-only count without scanning loaded modules. This
preserves the existing behavior for all other cases:
- Symbol only in a module: vmlinux count is 0, falls through to module
scan as before.
- Symbol qualified with MOD:SYM: mod != NULL, unchanged path.
- Symbol ambiguous within vmlinux itself: count > 1 is returned as-is.
Fixes: 926fe783c8 ("tracing/kprobes: Fix symbol counting logic by looking at modules as well")
Fixes: 9d8616034f ("tracing/kprobes: Add symbol counting check when module loads")
Suggested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Link: https://lore.kernel.org/r/20260407203912.1787502-2-andrey.grodzovsky@crowdstrike.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
parse_probe_arg() accepts quoted immediate strings and passes the body
after the opening quote to __parse_imm_string(). That helper currently
computes strlen(str) and immediately dereferences str[len - 1], which
underflows when the body is empty and not closed with double-quotation.
Reject empty non-closed immediate strings before checking for the closing quote.
Link: https://lore.kernel.org/all/20260401160315.88518-1-pengpeng@iscas.ac.cn/
Fixes: a42e3c4de9 ("tracing/probe: Add immediate string parameter support")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When the persistent ring buffer was first introduced, it did not make
sense to start tracing for it on the kernel command line. That's because
if there was a crash, the start of events would invalidate the events from
the previous boot that had the crash.
But now that there's a "backup" instance that can take a snapshot of the
persistent ring buffer when boot starts, it is possible to have the
persistent ring buffer start events at boot up and not lose the old events.
Update the code where the boot events start after all boot time instances
are created. This will allow the backup instance to copy the persistent
ring buffer from the previous boot, and allow the persistent ring buffer
to start tracing new events for the current boot.
reserve_mem=100M:12M:trace trace_instance=boot_mapped^@trace,sched trace_instance=backup=boot_mapped
The above will create a boot_mapped persistent ring buffer and enabled the
scheduler events. If there's a crash, a "backup" instance will be created
holding the events of the persistent ring buffer from the previous boot,
while the persistent ring buffer will once again start tracing scheduler
events of the current boot.
Now the user doesn't have to remember to start the persistent ring buffer.
It will always have the events started at each boot.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260331163924.6ccb3896@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since there is no reason to reuse the backup instance, make it readonly
(but erasable). Note that only backup instances are readonly, because
other trace instances will be empty unless it is writable. Only backup
instances have copy entries from the original.
With this change, most of the trace control files are removed from the
backup instance, including eventfs enable/filter etc.
# find /sys/kernel/tracing/instances/backup/events/ | wc -l
4093
# find /sys/kernel/tracing/instances/boot_map/events/ | wc -l
9573
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177502546939.1311542.1826814401724828930.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
On CPU hotplug, if it is the first time a trace_buffer sees a CPU, a
ring_buffer_per_cpu will be allocated and its corresponding bit toggled
in the cpumask. Many readers check this cpumask to know if they can
safely read the ring_buffer_per_cpu but they are doing so without memory
ordering and may observe the cpumask bit set while having NULL buffer
pointer.
Enforce the memory read ordering by sending an IPI to all online CPUs.
The hotplug path is a slow-path anyway and it saves us from adding read
barriers in numerous call sites.
Link: https://patch.msgid.link/20260401053659.3458961-1-vdonnefort@google.com
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
kprobe.multi programs run in atomic/RCU context and cannot sleep.
However, bpf_kprobe_multi_link_attach() did not validate whether the
program being attached had the sleepable flag set, allowing sleepable
helpers such as bpf_copy_from_user() to be invoked from a non-sleepable
context.
This causes a "sleeping function called from invalid context" splat:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 0
Fix this by rejecting sleepable programs early in
bpf_kprobe_multi_link_attach(), before any further processing.
Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Varun R Mallya <varunrmallya@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260401191126.440683-1-varunrmallya@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a trace_buffer is created while a CPU is offline, this CPU is
cleared from the trace_buffer CPU mask, preventing the creation of a
non-consuming iterator (ring_buffer_iter). For trace remotes, it means
the iterator fails to be allocated (-ENOMEM) even though there are
available ring buffers in the trace_buffer.
For non-consuming reads of trace remotes, skip missing ring_buffer_iter
to allow reading the available ring buffers.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://patch.msgid.link/20260401045100.3394299-2-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When ftrace_lookup_symbols() is called with a single symbol (cnt == 1),
use kallsyms_lookup_name() for O(log N) binary search instead of the
full linear scan via kallsyms_on_each_symbol().
ftrace_lookup_symbols() was designed for batch resolution of many
symbols in a single pass. For large cnt this is efficient: a single
O(N) walk over all symbols with O(log cnt) binary search into the
sorted input array. But for cnt == 1 it still decompresses all ~200K
kernel symbols only to match one.
kallsyms_lookup_name() uses the sorted kallsyms index and needs only
~17 decompressions for a single lookup.
This is the common path for kprobe.session with exact function names,
where libbpf sends one symbol per BPF_LINK_CREATE syscall.
If binary lookup fails (duplicate symbol names where the first match
is not ftrace-instrumented), the function falls through to the existing
linear scan path.
Before (cnt=1, 50 kprobe.session programs):
Attach: 858 ms (kallsyms_expand_symbol 25% of CPU)
After:
Attach: 52 ms (16x faster)
Cc: <bpf@vger.kernel.org>
Link: https://patch.msgid.link/20260302200837.317907-3-andrey.grodzovsky@crowdstrike.com
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The opid monitor validates that wakeup and need_resched events only
occur with interrupts and preemption disabled by following the
preemptirq tracepoints.
As reported in [1], those tracepoints might be inaccurate in some
situations (e.g. NMIs).
Since the monitor doesn't validate other ordering properties, remove the
dependency on preemptirq tracepoints and convert the monitor to a hybrid
automaton to validate the constraint during event handling.
This makes the monitor more robust by also removing the workaround for
interrupts missing the preemption tracepoints, which was working on
PREEMPT_RT only and allows the monitor to be built on kernels without
the preemptirqs tracepoints.
[1] - https://lore.kernel.org/lkml/20250625120823.60600-1-gmonaco@redhat.com
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260330111010.153663-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Deterministic automata define which events are allowed in every state,
but cannot define more sophisticated constraint taking into account the
system's environment (e.g. time or other states not producing events).
Add the Hybrid Automata monitor type as an extension of Deterministic
automata where each state transition is validating a constraint on a
finite number of environment variables.
Hybrid automata can be used to implement timed automata, where the
environment variables are clocks.
Also implement the necessary functionality to handle clock constraints
(ns or jiffy granularity) on state and events.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260330111010.153663-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Boot-time trigger registration can fail before the trigger-data cleanup
kthread exists. Deferring those frees until late init is fine, but the
post-boot fallback must still drain the deferred list if kthread
creation never succeeds.
Otherwise, boot-deferred nodes can accumulate on
trigger_data_free_list, later frees fall back to synchronously freeing
only the current object, and the older queued entries are leaked
forever.
To trigger this, add the following to the kernel command line:
trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon
The second traceon trigger will fail and be freed. This triggers a NULL
pointer dereference and crashes the kernel.
Keep the deferred boot-time behavior, but when kthread creation fails,
drain the whole queued list synchronously. Do the same in the late-init
drain path so queued entries are not stranded there either.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260324221326.1395799-3-atwellwea@gmail.com
Fixes: 61d445af0a ("tracing: Add bulk garbage collection of freeing event_trigger_data")
Signed-off-by: Wesley Atwell <atwellwea@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The testing for tracing was triggering a timestamp count issue that was
always off by one. This has been happening for some time but has never
been reported by anyone else. It was finally discovered to be an issue
with the "uptime" (jiffies) clock that happened to be traced and the
internal recursion caused the discrepancy. This would have been much
easier to solve if the clock function being used was displayed when the
error was detected.
Add the clock function to the error output.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260323202212.479bb288@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The commit f35dbac694 ("ring-buffer: Fix to update per-subbuf entries of
persistent ring buffer") was a fix and merged upstream. It is needed for
some other work in the ring buffer. The current branch has the remote
buffer code that is shared with the Arm64 subsystem and can't be rebased.
Merge in the upstream commit to allow continuing of the ring buffer work.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The modify logic registers temporary ftrace_ops object (tmp_ops) to trigger
the slow path for all direct callers to be able to safely modify attached
addresses.
At the moment we use ops->func_hash for tmp_ops filter, which represents all
the systems attachments. It's faster to use just the passed hash filter, which
contains only the modified sites and is always a subset of the ops->func_hash.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Menglong Dong <menglong8.dong@gmail.com>
Cc: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20260312123738.129926-1-jolsa@kernel.org
Fixes: e93672f770 ("ftrace: Add update_ftrace_direct_mod function")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the "copy_trace_marker" option is enabled for an instance, anything
written into /sys/kernel/tracing/trace_marker is also copied into that
instances buffer. When the option is set, that instance's trace_array
descriptor is added to the marker_copies link list. This list is protected
by RCU, as all iterations uses an RCU protected list traversal.
When the instance is deleted, all the flags that were enabled are cleared.
This also clears the copy_trace_marker flag and removes the trace_array
descriptor from the list.
The issue is after the flags are called, a direct call to
update_marker_trace() is performed to clear the flag. This function
returns true if the state of the flag changed and false otherwise. If it
returns true here, synchronize_rcu() is called to make sure all readers
see that its removed from the list.
But since the flag was already cleared, the state does not change and the
synchronization is never called, leaving a possible UAF bug.
Move the clearing of all flags below the updating of the copy_trace_marker
option which then makes sure the synchronization is performed.
Also use the flag for checking the state in update_marker_trace() instead
of looking at if the list is empty.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260318185512.1b6c7db4@gandalf.local.home
Fixes: 7b382efd5e ("tracing: Allow the top level trace_marker to write into another instances")
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/20260225133122.237275-1-sashal@kernel.org/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The system call trace events call trace_user_fault_read() to read the user
space part of some system calls. This is done by grabbing a per-cpu
buffer, disabling migration, enabling preemption, calling
copy_from_user(), disabling preemption, enabling migration and checking if
the task was preempted while preemption was enabled. If it was, the buffer
is considered corrupted and it tries again.
There's a safety mechanism that will fail out of this loop if it fails 100
times (with a warning). That warning message was triggered in some
pi_futex stress tests. Enabling the sched_switch trace event and
traceoff_on_warning, showed the problem:
pi_mutex_hammer-1375 [006] d..21 138.981648: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981651: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981656: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981659: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981664: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981667: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981671: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981675: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981679: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981682: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981687: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981690: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981695: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981698: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981703: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981706: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981711: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981714: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981719: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981722: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981727: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981730: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981735: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981738: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
What happened was the task 1375 was flagged to be migrated. When
preemption was enabled, the migration thread woke up to migrate that task,
but failed because migration for that task was disabled. This caused the
loop to fail to exit because the task scheduled out while trying to read
user space.
Every time the task enabled preemption the migration thread would schedule
in, try to migrate the task, fail and let the task continue. But because
the loop would only enable preemption with migration disabled, it would
always fail because each time it enabled preemption to read user space,
the migration thread would try to migrate it.
To solve this, when the loop fails to read user space without being
scheduled out, enabled and disable preemption with migration enabled. This
will allow the migration task to successfully migrate the task and the
next loop should succeed to read user space without being scheduled out.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260316130734.1858a998@gandalf.local.home
Fixes: 64cf7d058a ("tracing: Have trace_marker use per-cpu data to read user space")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Resolve conflict between this change in the upstream kernel:
4c652a4772 ("rseq: Mark rseq_arm_slice_extension_timer() __always_inline")
... and this pending change in timers/core:
0e98eb1481 ("entry: Prepare for deferred hrtimer rearming")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Compiler and tooling-generated symbols are difficult to maintain
across all supported architectures. Make the allowlist more robust by
replacing the harcoded list with a mechanism that automatically detects
these symbols.
This mechanism generates a C function designed to trigger common
compiler-inserted symbols.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260316092845.3367411-1-vdonnefort@google.com
[maz: added __msan prefix to allowlist as pointed out by Arnd]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Randconfig builds show a number of cryptic build errors from
hitting undefined symbols in simple_ring_buffer.o:
make[7]: *** [/home/arnd/arm-soc/kernel/trace/Makefile:147: kernel/trace/simple_ring_buffer.o.checked] Error 1
These happen with CONFIG_TRACE_BRANCH_PROFILING, CONFIG_KASAN_HW_TAGS,
CONFIG_STACKPROTECTOR, CONFIG_DEBUG_IRQFLAGS and indirectly from WARN_ON().
Add exceptions for each one that I have hit so far on arm64, x86_64 and arm
randconfig builds.
Other architectures likely hit additional ones, so it would be nice
to produce a little more verbose output that include the name of the
missing symbols directly.
Fixes: a717943d8e ("tracing: Check for undefined symbols in simple_ring_buffer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260312123601.625063-2-arnd@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The sentinel value added by the wrapper macros __print_symbolic() et al
prevents the callers from adding their own trailing comma. This makes
constructing symbol list dynamically based on kconfig values tedious.
Drop the sentinel elements, so callers can either specify the trailing
comma or not, just like in regular array initializers.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260311-hrtimer-cleanups-v1-2-095357392669@linutronix.de
Add a module to help testing the tracefs support for trace remotes. This
module:
* Use simple_ring_buffer to write into a ring-buffer.
* Declare a single "selftest" event that can be triggered from
user-space.
* Register a "test" trace remote.
This is intended to be used by trace remote selftests.
Link: https://patch.msgid.link/20260309162516.2623589-15-vdonnefort@google.com
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
An event is predefined point in the writer code that allows to log
data. Following the same scheme as kernel events, add remote events,
described to user-space within the events/ tracefs directory found in
the corresponding trace remote.
Remote events are expected to be described during the trace remote
registration.
Add also a .enable_event callback for trace_remote to toggle the event
logging, if supported.
Link: https://patch.msgid.link/20260309162516.2623589-10-vdonnefort@google.com
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
A trace remote relies on ring-buffer remotes to read and control
compatible tracing buffers, written by entity such as firmware or
hypervisor.
Add a Tracefs directory remotes/ that contains all instances of trace
remotes. Each instance follows the same hierarchy as any other to ease
the support by existing user-space tools.
This currently does not provide any event support, which will come
later.
Link: https://patch.msgid.link/20260309162516.2623589-6-vdonnefort@google.com
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
