Prior to the blamed commit, the bridge_num range was from
0 to ds->max_num_bridges - 1. After the commit, it is from
1 to ds->max_num_bridges.
So this check:
if (bridge_num >= max)
return 0;
must be updated to:
if (bridge_num > max)
return 0;
in order to allow the last bridge_num value (==max) to be used.
This is easiest visible when a driver sets ds->max_num_bridges=1.
The observed behaviour is that even the first created bridge triggers
the netlink extack "Range of offloadable bridges exceeded" warning, and
is handled in software rather than being offloaded.
Fixes: 3f9bb0301d ("net: dsa: make dp->bridge_num one-based")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260120211039.3228999-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot found that ndisc_router_discovery() could read and write
in6_dev->ra_mtu without holding a lock [1]
This looks fine, IFLA_INET6_RA_MTU is best effort.
Add READ_ONCE()/WRITE_ONCE() to document the race.
Note that we might also reject illegal MTU values
(mtu < IPV6_MIN_MTU || mtu > skb->dev->mtu) in a future patch.
[1]
BUG: KCSAN: data-race in ndisc_router_discovery / ndisc_router_discovery
read to 0xffff888119809c20 of 4 bytes by task 25817 on cpu 1:
ndisc_router_discovery+0x151d/0x1c90 net/ipv6/ndisc.c:1558
ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841
icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989
ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500
ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79
...
write to 0xffff888119809c20 of 4 bytes by task 25816 on cpu 0:
ndisc_router_discovery+0x155a/0x1c90 net/ipv6/ndisc.c:1559
ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841
icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989
ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500
ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79
...
value changed: 0x00000000 -> 0xe5400659
Fixes: 49b99da2c9 ("ipv6: add IFLA_INET6_RA_MTU to expose mtu value")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rocco Yue <rocco.yue@mediatek.com>
Link: https://patch.msgid.link/20260118152941.2563857-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is more of a preventive patch to make the code more consistent and
to prevent possible exploits that employ child qlen manipulations on qfq.
use cl_is_active instead of relying on the child qdisc's qlen to determine
class activation.
Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Design intent of teql is that it is only supposed to be used as root qdisc.
We need to check for that constraint.
Although not important, I will describe the scenario that unearthed this
issue for the curious.
GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows:
ROOT qdisc 1:0 (QFQ)
├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s
└── class 1:2 (weight=1, lmax=1514) teql
GangMin sends a packet which is enqueued to 1:1 (netem).
Any invocation of dequeue by QFQ from this class will not return a packet
until after 6.4s. In the meantime, a second packet is sent and it lands on
1:2. teql's enqueue will return success and this will activate class 1:2.
Main issue is that teql only updates the parent visible qlen (sch->q.qlen)
at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's
peek always returns NULL), dequeue will never be called and thus the qlen
will remain as 0. With that in mind, when GangMin updates 1:2's lmax value,
the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's
qlen was not incremented, qfq fails to deactivate the class, but still
frees its pointers from the aggregate. So when the first packet is
rescheduled after 6.4 seconds (netem's delay), a dangling pointer is
accessed causing GangMin's causing a UAF.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: GangMin Kim <km.kim1503@gmail.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at
the front of the recvmsg queue already has its mutex locked, it requeues
the call - whether or not the call is already queued. The call may be on
the queue because MSG_PEEK was also passed and so the call was not dequeued
or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue - and
moving it to the front if it is already queued. If we don't queue it, we
have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on the
queue, so fix that also.
Fixes: 540b1c48c3 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Faith <faith@zellic.io>
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
cc: Nir Ohfeld <niro@wiz.io>
cc: Willy Tarreau <w@1wt.eu>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/95163.1768428203@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A null-ptr-deref was reported in the SCTP transmit path when SCTP-AUTH key
initialization fails:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 0 PID: 16 Comm: ksoftirqd/0 Tainted: G W 6.6.0 #2
RIP: 0010:sctp_packet_bundle_auth net/sctp/output.c:264 [inline]
RIP: 0010:sctp_packet_append_chunk+0xb36/0x1260 net/sctp/output.c:401
Call Trace:
sctp_packet_transmit_chunk+0x31/0x250 net/sctp/output.c:189
sctp_outq_flush_data+0xa29/0x26d0 net/sctp/outqueue.c:1111
sctp_outq_flush+0xc80/0x1240 net/sctp/outqueue.c:1217
sctp_cmd_interpreter.isra.0+0x19a5/0x62c0 net/sctp/sm_sideeffect.c:1787
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x1a3/0x670 net/sctp/sm_sideeffect.c:1169
sctp_assoc_bh_rcv+0x33e/0x640 net/sctp/associola.c:1052
sctp_inq_push+0x1dd/0x280 net/sctp/inqueue.c:88
sctp_rcv+0x11ae/0x3100 net/sctp/input.c:243
sctp6_rcv+0x3d/0x60 net/sctp/ipv6.c:1127
The issue is triggered when sctp_auth_asoc_init_active_key() fails in
sctp_sf_do_5_1C_ack() while processing an INIT_ACK. In this case, the
command sequence is currently:
- SCTP_CMD_PEER_INIT
- SCTP_CMD_TIMER_STOP (T1_INIT)
- SCTP_CMD_TIMER_START (T1_COOKIE)
- SCTP_CMD_NEW_STATE (COOKIE_ECHOED)
- SCTP_CMD_ASSOC_SHKEY
- SCTP_CMD_GEN_COOKIE_ECHO
If SCTP_CMD_ASSOC_SHKEY fails, asoc->shkey remains NULL, while
asoc->peer.auth_capable and asoc->peer.peer_chunks have already been set by
SCTP_CMD_PEER_INIT. This allows a DATA chunk with auth = 1 and shkey = NULL
to be queued by sctp_datamsg_from_user().
Since command interpretation stops on failure, no COOKIE_ECHO should been
sent via SCTP_CMD_GEN_COOKIE_ECHO. However, the T1_COOKIE timer has already
been started, and it may enqueue a COOKIE_ECHO into the outqueue later. As
a result, the DATA chunk can be transmitted together with the COOKIE_ECHO
in sctp_outq_flush_data(), leading to the observed issue.
Similar to the other places where it calls sctp_auth_asoc_init_active_key()
right after sctp_process_init(), this patch moves the SCTP_CMD_ASSOC_SHKEY
immediately after SCTP_CMD_PEER_INIT, before stopping T1_INIT and starting
T1_COOKIE. This ensures that if shared key generation fails, authenticated
DATA cannot be sent. It also allows the T1_INIT timer to retransmit INIT,
giving the client another chance to process INIT_ACK and retry key setup.
Fixes: 730fc3d05c ("[SCTP]: Implete SCTP-AUTH parameter processing")
Reported-by: Zhen Chen <chenzhen126@huawei.com>
Tested-by: Zhen Chen <chenzhen126@huawei.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/44881224b375aa8853f5e19b4055a1a56d895813.1768324226.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vsock/virtio common tries to coalesce buffers in rx queue: if a linear skb
(with a spare tail room) is followed by a small skb (length limited by
GOOD_COPY_LEN = 128), an attempt is made to join them.
Since the introduction of MSG_ZEROCOPY support, assumption that a small skb
will always be linear is incorrect. In the zerocopy case, data is lost and
the linear skb is appended with uninitialized kernel memory.
Of all 3 supported virtio-based transports, only loopback-transport is
affected. G2H virtio-transport rx queue operates on explicitly linear skbs;
see virtio_vsock_alloc_linear_skb() in virtio_vsock_rx_fill(). H2G
vhost-transport may allocate non-linear skbs, but only for sizes that are
not considered for coalescence; see PAGE_ALLOC_COSTLY_ORDER in
virtio_vsock_alloc_skb().
Ensure only linear skbs are coalesced. Note that skb_tailroom(last_skb) > 0
guarantees last_skb is linear.
Fixes: 581512a6dc ("vsock/virtio: MSG_ZEROCOPY flag support")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260113-vsock-recv-coalescence-v2-1-552b17837cf4@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, can and IPsec.
Current release - regressions:
- net: add net.core.qdisc_max_burst
- can: propagate CAN device capabilities via ml_priv
Previous releases - regressions:
- dst: fix races in rt6_uncached_list_del() and
rt_del_uncached_list()
- ipv6: fix use-after-free in inet6_addr_del().
- xfrm: fix inner mode lookup in tunnel mode GSO segmentation
- ip_tunnel: spread netdev_lockdep_set_classes()
- ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv()
- bluetooth: hci_sync: enable PA sync lost event
- eth: virtio-net:
- fix the deadlock when disabling rx NAPI
- fix misalignment bug in struct virtnet_info
Previous releases - always broken:
- ipv4: ip_gre: make ipgre_header() robust
- can: fix SSP_SRC in cases when bit-rate is higher than 1 MBit.
- eth:
- mlx5e: profile change fix
- octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
- macvlan: fix possible UAF in macvlan_forward_source()"
* tag 'net-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
virtio_net: Fix misalignment bug in struct virtnet_info
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
can: raw: instantly reject disabled CAN frames
can: propagate CAN device capabilities via ml_priv
Revert "can: raw: instantly reject unsupported CAN frames"
net/sched: sch_qfq: do not free existing class in qfq_change_class()
selftests: drv-net: fix RPS mask handling for high CPU numbers
selftests: drv-net: fix RPS mask handling in toeplitz test
ipv6: Fix use-after-free in inet6_addr_del().
dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list()
net: hv_netvsc: reject RSS hash key programming without RX indirection table
tools: ynl: render event op docs correctly
net: add net.core.qdisc_max_burst
net: airoha: Fix typo in airoha_ppe_setup_tc_block_cb definition
net: phy: motorcomm: fix duplex setting error for phy leds
net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
net/mlx5e: Restore destroying state bit after profile cleanup
net/mlx5e: Pass netdev to mlx5e_destroy_netdev instead of priv
net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv
net/mlx5e: Fix crash on profile change rollback failure
...
Marc Kleine-Budde says:
====================
pull-request: can 2026-01-15
this is a pull request of 4 patches for net/main, it super-seeds the
"can 2026-01-14" pull request. The dev refcount leak in patch #3 is
fixed.
The first 3 patches are by Oliver Hartkopp and revert the approach to
instantly reject unsupported CAN frames introduced in
net-next-for-v6.19 and replace it by placing the needed data into the
CAN specific ml_priv.
The last patch is by Tetsuo Handa and fixes a J1939 refcount leak for
j1939_session in session deactivation upon receiving the second RTS.
linux-can-fixes-for-6.19-20260115
* tag 'linux-can-fixes-for-6.19-20260115' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
can: raw: instantly reject disabled CAN frames
can: propagate CAN device capabilities via ml_priv
Revert "can: raw: instantly reject unsupported CAN frames"
====================
Link: https://patch.msgid.link/20260115090603.1124860-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Steffen Klassert says:
====================
pull request (net): ipsec 2026-01-14
1) Fix inner mode lookup in tunnel mode GSO segmentation.
The protocol was taken from the wrong field.
2) Set ipv4 no_pmtu_disc flag only on output SAs. The
insertation of input SAs can fail if no_pmtu_disc
is set.
Please pull or let me know if there are problems.
ipsec-2026-01-14
* tag 'ipsec-2026-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: set ipv4 no_pmtu_disc flag only on output sa when direction is set
xfrm: Fix inner mode lookup in tunnel mode GSO segmentation
====================
Link: https://patch.msgid.link/20260114121817.1106134-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 1a620a7238
and its follow-up fixes for the introduced dependency issues.
commit 1a620a7238 ("can: raw: instantly reject unsupported CAN frames")
commit cb2dc6d286 ("can: Kconfig: select CAN driver infrastructure by default")
commit 6abd4577bc ("can: fix build dependency")
commit 5a5aff6338 ("can: fix build dependency")
The entire problem was caused by the requirement that a new network layer
feature needed to know about the protocol capabilities of the CAN devices.
Instead of accessing CAN device internal data structures which caused the
dependency problems a better approach has been developed which makes use of
CAN specific ml_priv data which is accessible from both sides.
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260109144135.8495-2-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pull bpf fixes from Alexei Starovoitov:
- Fix incorrect usage of BPF_TRAMP_F_ORIG_STACK in riscv JIT (Menglong
Dong)
- Fix reference count leak in bpf_prog_test_run_xdp() (Tetsuo Handa)
- Fix metadata size check in bpf_test_run() (Toke Høiland-Jørgensen)
- Check that BPF insn array is not allowed as a map for const strings
(Deepanshu Kartikey)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix reference count leak in bpf_prog_test_run_xdp()
bpf: Reject BPF_MAP_TYPE_INSN_ARRAY in check_reg_const_str()
selftests/bpf: Update xdp_context_test_run test to check maximum metadata size
bpf, test_run: Subtract size of xdp_frame from allowed metadata size
riscv, bpf: Fix incorrect usage of BPF_TRAMP_F_ORIG_STACK
In blamed commit, I added a check against the temporary queue
built in __dev_xmit_skb(). Idea was to drop packets early,
before any spinlock was acquired.
if (unlikely(defer_count > READ_ONCE(q->limit))) {
kfree_skb_reason(skb, SKB_DROP_REASON_QDISC_DROP);
return NET_XMIT_DROP;
}
It turned out that HTB Qdisc has a zero q->limit.
HTB limits packets on a per-class basis.
Some of our tests became flaky.
Add a new sysctl : net.core.qdisc_max_burst to control
how many packets can be stored in the temporary lockless queue.
Also add a new QDISC_BURST_DROP drop reason to better diagnose
future issues.
Thanks Neal !
Fixes: 100dfa74ca ("net: dev_queue_xmit() llist adoption")
Reported-and-bisected-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260107104159.3669285-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: enable PA Sync Lost event
* tag 'for-net-2026-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: enable PA Sync Lost event
====================
Link: https://patch.msgid.link/20260109211949.236218-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Analog to commit db5b4e39c4 ("ip6_gre: make ip6gre_header() robust")
Over the years, syzbot found many ways to crash the kernel
in ipgre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ipgre device.
[1]
skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0
kernel BUG at net/core/skbuff.c:213 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213
Call Trace:
<TASK>
skb_under_panic net/core/skbuff.c:223 [inline]
skb_push+0xc3/0xe0 net/core/skbuff.c:2641
ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897
dev_hard_header include/linux/netdevice.h:3436 [inline]
neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247
NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318
mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
Fixes: c544193214 ("GRE: Refactor GRE tunneling code.")
Reported-by: syzbot+7c134e1c3aa3283790b9@syzkaller.appspotmail.com
Closes: https://www.spinics.net/lists/netdev/msg1147302.html
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260108190214.1667040-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing entries in netdev_lock_type[] and netdev_lock_name[] :
CAN, MCTP, RAWIP, CAIF, IP6GRE, 6LOWPAN, NETLINK, VSOCKMON,
IEEE802154_MONITOR.
Also add a WARN_ONCE() in netdev_lock_pos() to help future bug hunting
next time a protocol is added without updating these arrays.
Fixes: 1a33e10e4a ("net: partially revert dynamic lockdep key changes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260108093244.830280-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ceph fixes from Ilya Dryomov:
"A bunch of libceph fixes split evenly between memory safety and
implementation correctness issues (all marked for stable) and a change
in maintainers for CephFS: Slava and Alex have formally taken over
Xiubo's role"
* tag 'ceph-for-6.19-rc5' of https://github.com/ceph/ceph-client:
libceph: make calc_target() set t->paused, not just clear it
libceph: reset sparse-read state in osd_fault()
libceph: return the handler error from mon_handle_auth_done()
libceph: make free_choose_arg_map() resilient to partial allocation
ceph: update co-maintainers list in MAINTAINERS
libceph: replace overzealous BUG_ON in osdmap_apply_incremental()
libceph: prevent potential out-of-bounds reads in handle_auth_done()
Enable the PA Sync Lost event mask to ensure PA sync loss is properly
reported and handled.
Fixes: 485e0626e5 ("Bluetooth: hci_event: Fix not handling PA Sync Lost event")
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johannes Berg says:
====================
Couple of fixes:
- mac80211:
- long-standing injection bug due to chanctx rework
- more recent interface iteration issue
- collect statistics before removing stations
- hwsim:
- fix NAN frequency typo (potential NULL ptr deref)
- fix locking of radio lock (needs softirqs disabled)
- wext:
- ancient issue with compat and events copying some
uninitialized stack data to userspace
* tag 'wireless-2026-01-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: collect station statistics earlier when disconnect
wifi: mac80211: restore non-chanctx injection behaviour
wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock
wifi: mac80211: don't iterate not running interfaces
wifi: mac80211_hwsim: fix typo in frequency notification
wifi: avoid kernel-infoleak from struct iw_point
====================
Link: https://patch.msgid.link/20260108140141.139687-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NULL pointer dereference fix.
msg_get_inq is an input field from caller to callee. Don't set it in
the callee, as the caller may not clear it on struct reuse.
This is a kernel-internal variant of msghdr only, and the only user
does reinitialize the field. So this is not critical for that reason.
But it is more robust to avoid the write, and slightly simpler code.
And it fixes a bug, see below.
Callers set msg_get_inq to request the input queue length to be
returned in msg_inq. This is equivalent to but independent from the
SO_INQ request to return that same info as a cmsg (tp->recvmsg_inq).
To reduce branching in the hot path the second also sets the msg_inq.
That is WAI.
This is a fix to commit 4d1442979e ("af_unix: don't post cmsg for
SO_INQ unless explicitly asked for"), which fixed the inverse.
Also avoid NULL pointer dereference in unix_stream_read_generic if
state->msg is NULL and msg->msg_get_inq is written. A NULL state->msg
can happen when splicing as of commit 2b514574f7 ("net: af_unix:
implement splice for stream af_unix sockets").
Also collapse two branches using a bitwise or.
Cc: stable@vger.kernel.org
Fixes: 4d1442979e ("af_unix: don't post cmsg for SO_INQ unless explicitly asked for")
Link: https://lore.kernel.org/netdev/willemdebruijn.kernel.24d8030f7a3de@gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260106150626.3944363-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The xdp_frame structure takes up part of the XDP frame headroom,
limiting the size of the metadata. However, in bpf_test_run, we don't
take this into account, which makes it possible for userspace to supply
a metadata size that is too large (taking up the entire headroom).
If userspace supplies such a large metadata size in live packet mode,
the xdp_update_frame_from_buff() call in xdp_test_run_init_page() call
will fail, after which packet transmission proceeds with an
uninitialised frame structure, leading to the usual Bad Stuff.
The commit in the Fixes tag fixed a related bug where the second check
in xdp_update_frame_from_buff() could fail, but did not add any
additional constraints on the metadata size. Complete the fix by adding
an additional check on the metadata size. Reorder the checks slightly to
make the logic clearer and add a comment.
Link: https://lore.kernel.org/r/fa2be179-bad7-4ee3-8668-4903d1853461@hust.edu.cn
Fixes: b6f1f780b3 ("bpf, test_run: Fix packet size check for live packet mode")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260105114747.1358750-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When skb_segment_list() is called during packet forwarding, it handles
packets that were aggregated by the GRO engine.
Historically, the segmentation logic in skb_segment_list assumes that
individual segments are split from a parent SKB and may need to carry
their own socket memory accounting. Accordingly, the code transfers
truesize from the parent to the newly created segments.
Prior to commit ed4cccef64 ("gro: fix ownership transfer"), this
truesize subtraction in skb_segment_list() was valid because fragments
still carry a reference to the original socket.
However, commit ed4cccef64 ("gro: fix ownership transfer") changed
this behavior by ensuring that fraglist entries are explicitly
orphaned (skb->sk = NULL) to prevent illegal orphaning later in the
stack. This change meant that the entire socket memory charge remained
with the head SKB, but the corresponding accounting logic in
skb_segment_list() was never updated.
As a result, the current code unconditionally adds each fragment's
truesize to delta_truesize and subtracts it from the parent SKB. Since
the fragments are no longer charged to the socket, this subtraction
results in an effective under-count of memory when the head is freed.
This causes sk_wmem_alloc to remain non-zero, preventing socket
destruction and leading to a persistent memory leak.
The leak can be observed via KMEMLEAK when tearing down the networking
environment:
unreferenced object 0xffff8881e6eb9100 (size 2048):
comm "ping", pid 6720, jiffies 4295492526
backtrace:
kmem_cache_alloc_noprof+0x5c6/0x800
sk_prot_alloc+0x5b/0x220
sk_alloc+0x35/0xa00
inet6_create.part.0+0x303/0x10d0
__sock_create+0x248/0x640
__sys_socket+0x11b/0x1d0
Since skb_segment_list() is exclusively used for SKB_GSO_FRAGLIST
packets constructed by GRO, the truesize adjustment is removed.
The call to skb_release_head_state() must be preserved. As documented in
commit cf673ed0e0 ("net: fix fraglist segmentation reference count
leak"), it is still required to correctly drop references to SKB
extensions that may be overwritten during __copy_skb_header().
Fixes: ed4cccef64 ("gro: fix ownership transfer")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260104213101.352887-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever a mirred redirect to self on egress happens, mirred allocates a
new skb (skb_to_send). The loop to self check was done after that
allocation, but was not freeing the newly allocated skb, causing a leak.
Fix this by moving the if-statement to before the allocation of the new
skb.
The issue was found by running the accompanying tdc test in 2/2
with config kmemleak enabled.
After a few minutes the kmemleak thread ran and reported the leak coming from
mirred.
Fixes: 1d856251a0 ("net/sched: act_mirred: fix loop detection")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260101135608.253079-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently calc_target() clears t->paused if the request shouldn't be
paused anymore, but doesn't ever set t->paused even though it's able to
determine when the request should be paused. Setting t->paused is left
to __submit_request() which is fine for regular requests but doesn't
work for linger requests -- since __submit_request() doesn't operate
on linger requests, there is nowhere for lreq->t.paused to be set.
One consequence of this is that watches don't get reestablished on
paused -> unpaused transitions in cases where requests have been paused
long enough for the (paused) unwatch request to time out and for the
subsequent (re)watch request to enter the paused state. On top of the
watch not getting reestablished, rbd_reregister_watch() gets stuck with
rbd_dev->watch_mutex held:
rbd_register_watch
__rbd_register_watch
ceph_osdc_watch
linger_reg_commit_wait
It's waiting for lreq->reg_commit_wait to be completed, but for that to
happen the respective request needs to end up on need_resend_linger list
and be kicked when requests are unpaused. There is no chance for that
if the request in question is never marked paused in the first place.
The fact that rbd_dev->watch_mutex remains taken out forever then
prevents the image from getting unmapped -- "rbd unmap" would inevitably
hang in D state on an attempt to grab the mutex.
Cc: stable@vger.kernel.org
Reported-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
When a fault occurs, the connection is abandoned, reestablished, and any
pending operations are retried. The OSD client tracks the progress of a
sparse-read reply using a separate state machine, largely independent of
the messenger's state.
If a connection is lost mid-payload or the sparse-read state machine
returns an error, the sparse-read state is not reset. The OSD client
will then interpret the beginning of a new reply as the continuation of
the old one. If this makes the sparse-read machinery enter a failure
state, it may never recover, producing loops like:
libceph: [0] got 0 extents
libceph: data len 142248331 != extent len 0
libceph: osd0 (1)...:6801 socket error on read
libceph: data len 142248331 != extent len 0
libceph: osd0 (1)...:6801 socket error on read
Therefore, reset the sparse-read state in osd_fault(), ensuring retries
start from a clean state.
Cc: stable@vger.kernel.org
Fixes: f628d79997 ("libceph: add sparse read support to OSD client")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently any error from ceph_auth_handle_reply_done() is propagated
via finish_auth() but isn't returned from mon_handle_auth_done(). This
results in higher layers learning that (despite the monitor considering
us to be successfully authenticated) something went wrong in the
authentication phase and reacting accordingly, but msgr2 still trying
to proceed with establishing the session in the background. In the
case of secure mode this can trigger a WARN in setup_crypto() and later
lead to a NULL pointer dereference inside of prepare_auth_signature().
Cc: stable@vger.kernel.org
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
