In situations where no system memory is migrated to devmem, and in
upcoming patches where another GPU is performing the migration to
the newly allocated devmem buffer, there is nothing to ensure any
ongoing clear to the devmem allocation or async eviction from the
devmem allocation is complete.
Address that by passing a struct dma_fence down to the copy
functions, and ensure it is waited for before migration is marked
complete.
v3:
- New patch.
v4:
- Update the logic used for determining when to wait for the
pre_migrate_fence.
- Update the logic used for determining when to warn for the
pre_migrate_fence since the scheduler fences apparently
can signal out-of-order.
v5:
- Fix a UAF (CI)
- Remove references to source P2P migration (Himal)
- Put the pre_migrate_fence after migration.
v6:
- Pipeline the pre_migrate_fence dependency (Matt Brost)
Fixes: c5b3eb5a90 ("drm/xe: Add GPUSVM device memory copy vfunc functions")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 16b5ad3195)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
When imported dma-bufs are destroyed, TTM is not fully
individualizing the dma-resv, but it *is* copying the fences that
need to be waited for before declaring idle. So in the case where
the bo->resv != bo->_resv we can still drop the preempt-fences, but
make sure we do that on bo->_resv which contains the fence-pointer
copy.
In the case where the copying fails, bo->_resv will typically not
contain any fences pointers at all, so there will be nothing to
drop. In that case, TTM would have ensured all fences that would
have been copied are signaled, including any remaining preempt
fences.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: fa0af721bd ("drm/ttm: test private resv obj on release/destroy")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251217093441.5073-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 425fe550fb)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
A 10ms timeslice for long-running workloads is far too long and causes
significant jitter in benchmarks when the system is shared. Adjust the
value to 5ms for preempt-fencing VMs, as the resume step there is quite
costly as memory is moved around, and set it to zero for pagefault VMs,
since switching back to pagefault mode after dma-fence mode is
relatively fast.
Also change min_run_period_ms to 'unsiged int' type rather than 's64' as
only positive values make sense.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-2-matthew.brost@intel.com
(cherry picked from commit 33a5abd9a6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The exec and vm_bind ioctl allow userspace to specify an arbitrary
num_syncs value. Without bounds checking, a very large num_syncs
can force an excessively large allocation, leading to kernel warnings
from the page allocator as below.
Introduce DRM_XE_MAX_SYNCS (set to 1024) and reject any request
exceeding this limit.
"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1217 at mm/page_alloc.c:5124 __alloc_frozen_pages_noprof+0x2f8/0x2180 mm/page_alloc.c:5124
...
Call Trace:
<TASK>
alloc_pages_mpol+0xe4/0x330 mm/mempolicy.c:2416
___kmalloc_large_node+0xd8/0x110 mm/slub.c:4317
__kmalloc_large_node_noprof+0x18/0xe0 mm/slub.c:4348
__do_kmalloc_node mm/slub.c:4364 [inline]
__kmalloc_noprof+0x3d4/0x4b0 mm/slub.c:4388
kmalloc_noprof include/linux/slab.h:909 [inline]
kmalloc_array_noprof include/linux/slab.h:948 [inline]
xe_exec_ioctl+0xa47/0x1e70 drivers/gpu/drm/xe/xe_exec.c:158
drm_ioctl_kernel+0x1f1/0x3e0 drivers/gpu/drm/drm_ioctl.c:797
drm_ioctl+0x5e7/0xc50 drivers/gpu/drm/drm_ioctl.c:894
xe_drm_ioctl+0x10b/0x170 drivers/gpu/drm/xe/xe_device.c:224
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xbb/0x380 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
"
v2: Add "Reported-by" and Cc stable kernels.
v3: Change XE_MAX_SYNCS from 64 to 1024. (Matt & Ashutosh)
v4: s/XE_MAX_SYNCS/DRM_XE_MAX_SYNCS/ (Matt)
v5: Do the check at the top of the exec func. (Matt)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6450
Cc: <stable@vger.kernel.org> # v6.12+
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Ivan Briano <ivan.briano@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251205234715.2476561-5-shuicheng.lin@intel.com
(cherry picked from commit b07bac9bd7)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
During GT reset recovery in do_gt_restart(), xe_uc_start() was called
before xe_reg_sr_apply_mmio() restored engine-specific registers. This
created a race window where the scheduler could run jobs before hardware
state was fully restored.
This caused failures in eudebug tests (xe_exec_sip_eudebug@breakpoint-
waitsip-*) where TD_CTL register (containing TD_CTL_GLOBAL_DEBUG_ENABLE)
wasn't restored before jobs started executing. Breakpoints would fail to
trigger SIP entry because the debug enable bit wasn't set yet.
Fix by moving xe_uc_start() after all MMIO register restoration,
including engine registers and CCS mode configuration, ensuring all
hardware state is fully restored before any jobs can be scheduled.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Jan Maslak <jan.maslak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251210145618.169625-2-jan.maslak@intel.com
(cherry picked from commit 825aed0328)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
MEI GSC interrupt comes from i915 or xe driver. It has top half and
bottom half. Top half is called from i915/xe interrupt handler. It
should be in irq disabled context.
With RT kernel(PREEMPT_RT enabled), by default IRQ handler is in
threaded IRQ. MEI GSC top half might be in threaded IRQ context.
generic_handle_irq_safe API could be called from either IRQ or
process context, it disables local IRQ then calls MEI GSC interrupt
top half.
This change fixes B580 GPU boot issue with RT enabled.
Fixes: e02cea83d3 ("drm/xe/gsc: add Battlemage support")
Tested-by: Baoli Zhang <baoli.zhang@intel.com>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251107033152.834960-1-junxiao.chang@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit 3efadf0287)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
If wait for ring space started just before migration, it can delay
the recovery process, by waiting without bailout path for up to 2
seconds.
Two second wait for recovery is not acceptable, and if the ring was
completely filled even without the migration temporarily stopping
execution, then such a wait will result in up to a thousand new jobs
(assuming constant flow) being added while the wait is happening.
While this will not cause data corruption, it will lead to warning
messages getting logged due to reset being scheduled on a GT under
recovery. Also several seconds of unresponsiveness, as the backlog
of jobs gets progressively executed.
Add a bailout condition, to make sure the recovery starts without
much delay. The recovery is expected to finish in about 100 ms when
under moderate stress, so the condition verification period needs to be
below that - settling at 64 ms.
The theoretical max time which the recovery can take depends on how
many requests can be emitted to engine rings and be pending execution.
While stress testing, it was possible to reach 10k pending requests
on rings when a platform with two GTs was used. This resulted in max
recovery time of 5 seconds. But in real life situations, it is very
unlikely that the amount of pending requests will ever exceed 100,
and for that the recovery time will be around 50 ms - well within our
claimed limit of 100ms.
Fixes: a4dae94aad ("drm/xe/vf: Wakeup in GuC backend on VF post migration recovery")
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251204200820.2206168-1-tomasz.lis@intel.com
(cherry picked from commit a00e305fba)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The Xe driver fails to build when CONFIG_DRM_XE_GPUSVM is disabled
but CONFIG_DRM_GPUSVM is turned on, due to the clash of two commits:
In file included from drivers/gpu/drm/xe/xe_vm_madvise.c:8:
drivers/gpu/drm/xe/xe_svm.h: In function 'xe_svm_init':
include/linux/stddef.h:8:14: error: passing argument 5 of 'drm_gpusvm_init' makes integer from pointer without a cast [-Wint-conversion]
drivers/gpu/drm/xe/xe_svm.h:217:38: note: in expansion of macro 'NULL'
217 | NULL, NULL, 0, 0, 0, NULL, NULL, 0);
| ^~~~
In file included from drivers/gpu/drm/xe/xe_bo_types.h:11,
from drivers/gpu/drm/xe/xe_bo.h:11,
from drivers/gpu/drm/xe/xe_vm_madvise.c:11:
include/drm/drm_gpusvm.h:254:35: note: expected 'long unsigned int' but argument is of type 'void *'
254 | unsigned long mm_start, unsigned long mm_range,
| ~~~~~~~~~~~~~~^~~~~~~~
In file included from drivers/gpu/drm/xe/xe_vm_madvise.c:14:
drivers/gpu/drm/xe/xe_svm.h:216:16: error: too many arguments to function 'drm_gpusvm_init'; expected 10, have 11
216 | return drm_gpusvm_init(&vm->svm.gpusvm, "Xe SVM (simple)", &vm->xe->drm,
| ^~~~~~~~~~~~~~~
217 | NULL, NULL, 0, 0, 0, NULL, NULL, 0);
| ~
include/drm/drm_gpusvm.h:251:5: note: declared here
Adapt the caller to the new argument list by removing the extraneous
NULL argument.
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Fixes: 10aa5c8060 ("drm/gpusvm, drm/xe: Fix userptr to not allow device private pages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094704.1030933-1-arnd@kernel.org
(cherry picked from commit 29bce9c8b4)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Pull more drm updates from Dave Airlie:
"There was some additional intel code for color operations we wanted to
land. However I discovered I missed a pull for the xe vfio driver
which I had sorted into 6.20 in my brain, until Thomas mentioned it.
This contains the xe vfio code, a bunch of xe fixes that were waiting
and the i915 color management support. I'd like to include it as part
of keeping the two main vendors on the same page and giving a good
cross-driver experience for userspace when it starts using it.
vfio:
- add a vfio_pci variant driver for Intel
xe/i915 display:
- add plane color management support
xe:
- Add scope-based cleanup helper for runtime PM
- vfio xe driver prerequisites and exports
- fix vfio link error
- Fix a memory leak
- Fix a 64-bit division
- vf migration fix
- LRC pause fix"
* tag 'drm-next-2025-12-05' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/i915/color: Enable Plane Color Pipelines
drm/i915/color: Add 3D LUT to color pipeline
drm/i915/color: Add registers for 3D LUT
drm/i915/color: Program Plane Post CSC Registers
drm/i915/color: Program Pre-CSC registers
drm/i915/color: Add framework to program PRE/POST CSC LUT
drm/i915: Add register definitions for Plane Post CSC
drm/i915: Add register definitions for Plane Degamma
drm/i915/color: Add plane CTM callback for D12 and beyond
drm/i915/color: Preserve sign bit when int_bits is Zero
drm/i915/color: Add framework to program CSC
drm/i915/color: Create a transfer function color pipeline
drm/i915/color: Add helper to create intel colorop
drm/i915: Add intel_color_op
drm/i915/display: Add identifiers for driver specific blocks
drm/xe/pf: fix VFIO link error
drm/xe: Protect against unset LRC when pausing submissions
drm/xe/vf: Start re-emission from first unsignaled job during VF migration
drm/xe/pf: Use div_u64 when calculating GGTT profile
drm/xe: Fix memory leak when handling pagefault vma
...
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common
allocator to prevent a potential race with new non-VMD buses (Dan
Williams)
- Enable Precision Time Measurement (PTM) only if device advertises
support for a relevant role, to prevent invalid PTM Requests that
cause ACS violations that are reported as AER Uncorrectable
Non-Fatal errors (Mika Westerberg)
Resource management:
- Prevent resource tree corruption when BAR resize fails (Ilpo
Järvinen)
- Restore BARs to the original size if a BAR resize fails (Ilpo
Järvinen)
- Remove BAR release from BAR resize attempts by the xe, i915, and
amdgpu drivers so the PCI core can restore BARs if the resize fails
(Ilpo Järvinen)
- Move Resizable BAR code to rebar.c (Ilpo Järvinen)
- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
Järvinen)
- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
Järvinen)
Power management and error handling:
- For drivers using PCI legacy suspend, save config state at suspend
so that state (not any earlier state from enumeration, probe, or
error recovery) will be restored when resuming (Lukas Wunner)
- For devices with no driver or a driver that lacks power management,
save config state at hibernate so that state (not any earlier state
from enumeration, probe, or error recovery) will be restored when
resuming (Lukas Wunner)
- Save device config space on device addition, before driver binding,
so error recovery works more reliably (Lukas Wunner)
- Drop pci_save_state() from several drivers that no longer need it
since the PCI core always does it and pci_restore_state() no longer
invalidates the saved state (Lukas Wunner)
- Document use of pci_save_state() by drivers to capture the state
they want restored during error recovery (Lukas Wunner)
Power control:
- Add a struct pci_ops.assert_perst() function pointer to
assert/deassert PCIe PERST# and implement it for the qcom driver
(Krishna Chaitanya Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
switch, which must be held in reset after poweron so the pwrctrl
driver can configure the switch via I2C before bringing up the
links (Krishna Chaitanya Chundru)
Endpoint framework:
- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)
- Add endpoint VNTB MSI doorbell support to reduce latency between
host and endpoint (Frank Li)
New native PCIe controller drivers:
- Add CIX Sky1 host controller DT binding and driver (Hans Zhang)
- Add NXP S32G host controller DT binding and driver (Vincent
Guittot)
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
Beznea)
- Add SpacemiT K1 host controller DT binding and driver (Alex Elder)
Amlogic Meson PCIe controller driver:
- Update DT binding to name DBI region 'dbi', not 'elbi', and update
driver to support both (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Move struct pci_host_bridge allocation from pci_host_common_init()
to callers, which significantly simplifies pcie-apple (Marc
Zyngier)
Broadcom STB PCIe controller driver:
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe
caused an unrecoverable abort (Jim Quinlan)
Cadence PCIe controller driver:
- Add module support for Cadence platform host and endpoint
controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
for new CIX Sky1 driver (Manikandan K Pillai)
MediaTek PCIe controller driver:
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian
Marangi)
Qualcomm PCIe controller driver:
- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)
- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
schemas (Krzysztof Kozlowski)
- Look up OPP using both frequency and data rate (not just frequency)
so RPMh votes can account for both (Krishna Chaitanya Chundru)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)
STMicroelectronics STM32MP25 PCIe controller driver:
- Fix a race between link training and endpoint register
initialization (Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
Synopsys DesignWare PCIe controller driver:
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver
says it's supported, which prevents users from enabling non-working
L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn
Helgaas)
- Configure L1SS support in dw-rockchip when DT says
'supports-clkreq' (Shawn Lin)
TI Keystone PCIe controller driver:
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)"
* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
PCI: Add Renesas RZ/G3S host controller driver
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
PCI: Validate pci_rebar_size_supported() input
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
...
Add a color pipeline with three colorops in the sequence
1D LUT - 3x4 CTM - 1D LUT
This pipeline can be used to do any color space conversion or HDR
tone mapping
v2: Change namespace to drm_plane_colorop*
v3: Use simpler/pre-existing colorops for first iteration
v4:
- s/*_tf_*/*_color_* (Jani)
- Refactor to separate files (Jani)
- Add missing space in comment (Suraj)
- Consolidate patch that adds/attaches pipeline property
v5:
- Limit MAX_COLOR_PIPELINES to 2.(Suraj)
Increase it as and when we add more pipelines.
- Remove redundant initialization code (Suraj)
v6:
- Use drm_plane_create_color_pipeline_property() (Arun)
Now MAX_COLOR_PIPELINES is 1
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-5-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
The Makefile logic for building xe_sriov_vfio.o was added incorrectly,
as setting CONFIG_XE_VFIO_PCI=m means it doesn't get included into a
built-in xe driver:
ERROR: modpost: "xe_sriov_vfio_stop_copy_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_stop_copy_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_suspend_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_wait_flr_done" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_error" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_data_write" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_migration_supported" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
WARNING: modpost: suppressed 3 unresolved symbol warnings because there were too many)
Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to decide whether to
include the object instead.
Fixes: bd45d46ffc ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094154.1029357-1-arnd@kernel.org
(cherry picked from commit ef7de33544)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
The LRC software ring tail is reset to the first unsignaled pending
job's head.
Fix the re-emission logic to begin submitting from the first unsignaled
job detected, rather than scanning all pending jobs, which can cause
imbalance.
v2:
- Include missing local changes
v3:
- s/skip_replay/restore_replay (Tomasz)
Fixes: c25c1010df ("drm/xe/vf: Replay GuC submission state on pause / unpause")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://patch.msgid.link/20251121152750.240557-1-matthew.brost@intel.com
(cherry picked from commit 00937fe192)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add a scope-based helpers for runtime PM that may be used to simplify
cleanup logic and potentially avoid goto-based cleanup.
For example, using
guard(xe_pm_runtime)(xe);
will get runtime PM and cause a corresponding put to occur automatically
when the current scope is exited. 'xe_pm_runtime_noresume' can be used
as a guard replacement for the corresponding 'noresume' variant.
There's also an xe_pm_runtime_ioctl conditional guard that can be used
as a replacement for xe_runtime_ioctl():
ACQUIRE(xe_pm_runtime_ioctl, pm)(xe);
if ((ret = ACQUIRE_ERR(xe_pm_runtime_ioctl, &pm)) < 0)
/* failed */
In a few rare cases (such as gt_reset_worker()) we need to ensure that
runtime PM is dropped when the function is exited by any means
(including error paths), but the function does not need to acquire
runtime PM because that has already been done earlier by a different
function. For these special cases, an 'xe_pm_runtime_release_only'
guard can be used to handle the release without doing an acquisition.
These guards will be used in future patches to eliminate some of our
goto-based cleanup.
v2:
- Specify success condition for xe_pm runtime_ioctl as _RET >= 0 so
that positive values will be properly identified as success and
trigger destructor cleanup properly.
v3:
- Add comments to the kerneldoc for the existing 'get' functions
indicating that scope-based handling should be preferred where
possible. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251118164338.3572146-31-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 59e7528dbf)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
xe_guc_ct_init_noalloc() allocates the CT workqueue and other helpers
before it tries to initialize ct->lock. If drmm_mutex_init() fails
we currently bail out without releasing those resources because the
guc_ct_fini() hasn’t been registered yet.
Since destroy_workqueue() in guc_ct_fini() may flush the workqueue, which
in turn can take the ct lock, the initialization sequence is restructured
to first initialize the ct->lock, then set up all CT state, and finally
register guc_ct_fini().
v2: guc_ct_fini() does take ct lock. (Matt)
v3: move primelockdep() together with drmm_mutex_init(). (Lucas)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251110184522.1581001-2-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 2e4ad5b066)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
