Brendan Jackman says:
====================
There's still one unresolved review comment from John[3] which I
will resolve with a followup patch.
Differences from v6->v7 [1]:
* Fixed riscv build error detected by 0-day robot.
Differences from v5->v6 [1]:
* Carried Björn Töpel's ack for RISC-V code, plus a couple more acks from
Yonhgong.
* Doc fixups.
* Trivial cleanups.
Differences from v4->v5 [1]:
* Fixed bogus type casts in interpreter that led to warnings from
the 0day robot.
* Dropped feature-detection for Clang per Andrii's suggestion in [4].
The selftests will now fail to build unless you have llvm-project
commit 286daafd6512. The ENABLE_ATOMICS_TEST macro is still needed
to support the no_alu32 tests.
* Carried some Acks from John and Yonghong.
* Dropped confusing usage of __atomic_exchange from prog_test in
favour of __sync_lock_test_and_set.
* [Really] got rid of all the forest of instruction macros
(BPF_ATOMIC_FETCH_ADD and friends); now there's just BPF_ATOMIC_OP
to define all the instructions as we use them in the verifier
tests. This makes the atomic ops less special in that API, and I
don't think the resulting usage is actually any harder to read.
Differences from v3->v4 [1]:
* Added one Ack from Yonghong. He acked some other patches but those
have now changed non-trivally so I didn't add those acks.
* Fixups to commit messages.
* Fixed disassembly and comments: first arg to atomic_fetch_* is a
pointer.
* Improved prog_test efficiency. BPF progs are now all loaded in a
single call, then the skeleton is re-used for each subtest.
* Dropped use of tools/build/feature in favour of a one-liner in the
Makefile.
* Dropped the commit that created an emit_neg helper in the x86
JIT. It's not used any more (it wasn't used in v3 either).
* Combined all the different filter.h macros (used to be
BPF_ATOMIC_ADD, BPF_ATOMIC_FETCH_ADD, BPF_ATOMIC_AND, etc) into
just BPF_ATOMIC32 and BPF_ATOMIC64.
* Removed some references to BPF_STX_XADD from tools/, samples/ and
lib/ that I missed before.
Differences from v2->v3 [1]:
* More minor fixes and naming/comment changes
* Dropped atomic subtract: compilers can implement this by preceding
an atomic add with a NEG instruction (which is what the x86 JIT did
under the hood anyway).
* Dropped the use of -mcpu=v4 in the Clang BPF command-line; there is
no longer an architecture version bump. Instead a feature test is
added to Kbuild - it builds a source file to check if Clang
supports BPF atomics.
* Fixed the prog_test so it no longer breaks
test_progs-no_alu32. This requires some ifdef acrobatics to avoid
complicating the prog_tests model where the same userspace code
exercises both the normal and no_alu32 BPF test objects, using the
same skeleton header.
Differences from v1->v2 [1]:
* Fixed mistakes in the netronome driver
* Addd sub, add, or, xor operations
* The above led to some refactors to keep things readable. (Maybe I
should have just waited until I'd implemented these before starting
the review...)
* Replaced BPF_[CMP]SET | BPF_FETCH with just BPF_[CMP]XCHG, which
include the BPF_FETCH flag
* Added a bit of documentation. Suggestions welcome for more places
to dump this info...
The prog_test that's added depends on Clang/LLVM features added by
Yonghong in commit 286daafd6512 (was
https://reviews.llvm.org/D72184).
This only includes a JIT implementation for x86_64 - I don't plan to
implement JIT support myself for other architectures.
Operations
==========
This patchset adds atomic operations to the eBPF instruction set. The
use-case that motivated this work was a trivial and efficient way to
generate globally-unique cookies in BPF progs, but I think it's
obvious that these features are pretty widely applicable. The
instructions that are added here can be summarised with this list of
kernel operations:
* atomic[64]_[fetch_]add
* atomic[64]_[fetch_]and
* atomic[64]_[fetch_]or
* atomic[64]_xchg
* atomic[64]_cmpxchg
The following are left out of scope for this effort:
* 16 and 8 bit operations
* Explicit memory barriers
Encoding
========
I originally planned to add new values for bpf_insn.opcode. This was
rather unpleasant: the opcode space has holes in it but no entire
instruction classes[2]. Yonghong Song had a better idea: use the
immediate field of the existing STX XADD instruction to encode the
operation. This works nicely, without breaking existing programs,
because the immediate field is currently reserved-must-be-zero, and
extra-nicely because BPF_ADD happens to be zero.
Note that this of course makes immediate-source atomic operations
impossible. It's hard to imagine a measurable speedup from such
instructions, and if it existed it would certainly not benefit x86,
which has no support for them.
The BPF_OP opcode fields are re-used in the immediate, and an
additional flag BPF_FETCH is used to mark instructions that should
fetch a pre-modification value from memory.
So, BPF_XADD is now called BPF_ATOMIC (the old name is kept to avoid
breaking userspace builds), and where we previously had .imm = 0, we
now have .imm = BPF_ADD (which is 0).
Operands
========
Reg-source eBPF instructions only have two operands, while these
atomic operations have up to four. To avoid needing to encode
additional operands, then:
- One of the input registers is re-used as an output register
(e.g. atomic_fetch_add both reads from and writes to the source
register).
- Where necessary (i.e. for cmpxchg) , R0 is "hard-coded" as one of
the operands.
This approach also allows the new eBPF instructions to map directly
to single x86 instructions.
[1] Previous iterations:
v1: https://lore.kernel.org/bpf/20201123173202.1335708-1-jackmanb@google.com/
v2: https://lore.kernel.org/bpf/20201127175738.1085417-1-jackmanb@google.com/
v3: https://lore.kernel.org/bpf/X8kN7NA7bJC7aLQI@google.com/
v4: https://lore.kernel.org/bpf/20201207160734.2345502-1-jackmanb@google.com/
v5: https://lore.kernel.org/bpf/20201215121816.1048557-1-jackmanb@google.com/
v6: https://lore.kernel.org/bpf/20210112154235.2192781-1-jackmanb@google.com/
[2] Visualisation of eBPF opcode space:
https://gist.github.com/bjackman/00fdad2d5dfff601c1918bc29b16e778
[3] Comment from John about propagating bounds in verifier:
https://lore.kernel.org/bpf/5fcf0fbcc8aa8_9ab320853@john-XPS-13-9370.notmuch/
[4] Mail from Andrii about not supporting old Clang in selftests:
https://lore.kernel.org/bpf/CAEf4BzYBddPaEzRUs=jaWSo5kbf=LZdb7geAUVj85GxLQztuAQ@mail.gmail.com/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The prog_test that's added depends on Clang/LLVM features added by
Yonghong in commit 286daafd6512 (was https://reviews.llvm.org/D72184).
Note the use of a define called ENABLE_ATOMICS_TESTS: this is used
to:
- Avoid breaking the build for people on old versions of Clang
- Avoid needing separate lists of test objects for no_alu32, where
atomics are not supported even if Clang has the feature.
The atomics_test.o BPF object is built unconditionally both for
test_progs and test_progs-no_alu32. For test_progs, if Clang supports
atomics, ENABLE_ATOMICS_TESTS is defined, so it includes the proper
test code. Otherwise, progs and global vars are defined anyway, as
stubs; this means that the skeleton user code still builds.
The atomics_test.o userspace object is built once and used for both
test_progs and test_progs-no_alu32. A variable called skip_tests is
defined in the BPF object's data section, which tells the userspace
object whether to skip the atomics test.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-11-jackmanb@google.com
This adds instructions for
atomic[64]_[fetch_]and
atomic[64]_[fetch_]or
atomic[64]_[fetch_]xor
All these operations are isomorphic enough to implement with the same
verifier, interpreter, and x86 JIT code, hence being a single commit.
The main interesting thing here is that x86 doesn't directly support
the fetch_ version these operations, so we need to generate a CMPXCHG
loop in the JIT. This requires the use of two temporary registers,
IIUC it's safe to use BPF_REG_AX and x86's AUX_REG for this purpose.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-10-jackmanb@google.com
Since the atomic operations that are added in subsequent commits are
all isomorphic with BPF_ADD, pull out a macro to avoid the
interpreter becoming dominated by lines of atomic-related code.
Note that this sacrificies interpreter performance (combining
STX_ATOMIC_W and STX_ATOMIC_DW into single switch case means that we
need an extra conditional branch to differentiate them) in favour of
compact and (relatively!) simple C code.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-9-jackmanb@google.com
This adds two atomic opcodes, both of which include the BPF_FETCH
flag. XCHG without the BPF_FETCH flag would naturally encode
atomic_set. This is not supported because it would be of limited
value to userspace (it doesn't imply any barriers). CMPXCHG without
BPF_FETCH woulud be an atomic compare-and-write. We don't have such
an operation in the kernel so it isn't provided to BPF either.
There are two significant design decisions made for the CMPXCHG
instruction:
- To solve the issue that this operation fundamentally has 3
operands, but we only have two register fields. Therefore the
operand we compare against (the kernel's API calls it 'old') is
hard-coded to be R0. x86 has similar design (and A64 doesn't
have this problem).
A potential alternative might be to encode the other operand's
register number in the immediate field.
- The kernel's atomic_cmpxchg returns the old value, while the C11
userspace APIs return a boolean indicating the comparison
result. Which should BPF do? A64 returns the old value. x86 returns
the old value in the hard-coded register (and also sets a
flag). That means return-old-value is easier to JIT, so that's
what we use.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-8-jackmanb@google.com
A subsequent patch will add additional atomic operations. These new
operations will use the same opcode field as the existing XADD, with
the immediate discriminating different operations.
In preparation, rename the instruction mode BPF_ATOMIC and start
calling the zero immediate BPF_ADD.
This is possible (doesn't break existing valid BPF progs) because the
immediate field is currently reserved MBZ and BPF_ADD is zero.
All uses are removed from the tree but the BPF_XADD definition is
kept around to avoid breaking builds for people including kernel
headers.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
Using global sp_in_global directly to fix the following warning,
arch/riscv/kernel/stacktrace.c:31:3: warning: ‘register’ is not at beginning of declaration [-Wold-style-declaration]
31 | const register unsigned long current_sp = sp_in_global;
| ^~~~~
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Eran Ben Elisha says:
====================
Dissect PTP L2 packet header
This series adds support for dissecting PTP L2 packet
header (EtherType 0x88F7).
For packet header dissecting, skb->protocol is needed. Add protocol
parsing operation to vlan ops, to guarantee skb->protocol is set,
as EtherType 0x88F7 occasionally follows a vlan header.
====================
Link: https://lore.kernel.org/r/1610478433-7606-1-git-send-email-eranbe@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for parsing PTP L2 packet header. Such packet consists
of an L2 header (with ethertype of ETH_P_1588), PTP header, body
and an optional suffix.
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add parse protocol header ops for vlan device. Before this patch, vlan
tagged packet transmitted by af_packet had skb->protocol unset. Some
kernel methods (like __skb_flow_dissect()) rely on this missing information
for its packet processing.
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
amd-drm-fixes-5.11-2021-01-14:
amdgpu:
- Update repo location in MAINTAINERS
- Add some new renoir PCI IDs
- Revert CRC UAPI changes
- Revert OLED display fix which cases clocking problems for some systems
- Misc vangogh fixes
- GFX fix for sienna cichlid
- DCN1.0 fix for pipe split
- Fix incorrect PSP command
amdkfd:
- Fix possible out of bounds read in vcrat creation
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114201354.3998-1-alexander.deucher@amd.com
Alex Elder says:
====================
net: ipa: GSI interrupt updates
This series implements some updates for the GSI interrupt code,
buliding on some bug fixes implemented last month.
The first two are simple changes made to improve readability and
consistency. The third replaces all msleep() calls with comparable
usleep_range() calls.
The remainder make some more substantive changes to make the code
align with recommendations from Qualcomm. The fourth implements a
much shorter timeout for completion GSI commands, and the fifth
implements a longer delay between retries of the STOP channel
command. Finally, the last implements retries for stopping TX
channels (in addition to RX channels).
====================
Link: https://lore.kernel.org/r/20210113171532.19248-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For RX channels we issue a stop command more than once if necessary
to allow it to stop. It turns out that TX channels could also
require retries.
Retry channel stop commands if necessary regardless of the channel
direction. Rename the symbol defining the retry count so it's not
RX-specific.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a GSI stop channel command leaves the channel in STOP_IN_PROC
state, we retry the stop command after a 1-2 millisecond delay.
I have been told that a 3-5 millisecond delay is a better choice.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The GSI command timeout is currently 5 seconds, which is much higher
than it should be.
Express the timeout in milliseconds rather than seconds, and reduce
it to 50 milliseconds.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
65;6003;1c
The use of msleep() for small periods (less than 20 milliseconds) is
not recommended because the actual delay can be much different than
expected.
We use msleep(1) in several places in the IPA driver to insert short
delays. Replace them with usleep_range calls, which should reliably
delay a period in the range requested.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new function gsi_irq_ev_ctrl_enable() that encapsulates
enabling the event ring control GSI interrupt type, and enables a
single event ring to signal that interrupt. When an event ring
changes state as a result of an event ring command, it triggers this
interrupt.
Create an inverse function gsi_irq_ev_ctrl_disable() as well.
Because only one event ring at a time is enabled for this interrupt,
we can simply disable the interrupt for *all* channels.
Create a pair of helpers that serve the same purpose for channel
commands.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The return value of gsi_command() is true if successful or false if
we time out waiting for a completion interrupt.
Rename the variables in the three callers of gsi_command() to be
"timeout", to make it more obvious that's the only reason for
failure.
In addition, add a "gsi_" prefix to evt_ring_command() so its name
is consistent with the convention used for GSI channel and generic
commands.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can-next 2021-01-14
The first two patches update the MAINTAINERS file, Lukas Bulwahn's patch fixes
the files entry for the tcan4x5x driver, which was broken by me in net-next.
A patch by me adds the a missing header file to the CAN Networking Layer.
The next 5 patches are by me and split the the CAN driver related
infrastructure code into more files in a separate subdir. The next two patches
by me clean up the CAN length related code. This is followed by 6 patches by
Vincent Mailhol and me, they add helper code for for CAN frame length
calculation neede for BQL support.
A patch by Vincent Mailhol adds software TX timestamp support.
The last patch is by me, targets the tcan4x5x driver, and removes the unneeded
__packed attribute from the struct tcan4x5x_map_buf.
* tag 'linux-can-next-for-5.12-20210114' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: tcan4x5x: remove __packed attribute from struct tcan4x5x_map_buf
can: dev: can_put_echo_skb(): add software tx timestamps
can: dev: can_rx_offload_get_echo_skb(): extend to return can frame length
can: dev: can_get_echo_skb(): extend to return can frame length
can: dev: can_put_echo_skb(): extend to handle frame_len
can: dev: extend struct can_skb_priv to hold CAN frame length
can: length: can_skb_get_frame_len(): introduce function to get data length of frame in data link layer
can: length: canfd_sanitize_len(): add function to sanitize CAN-FD data length
can: length: can_fd_len2dlc(): simplify length calculcation
can: length: convert to kernel coding style
can: dev: move netlink related code into seperate file
can: dev: move skb related into seperate file
can: dev: move length related code into seperate file
can: dev: move bittiming related code into seperate file
can: dev: move driver related infrastructure into separate subdir
MAINTAINERS: CAN network layer: add missing header file can-ml.h
MAINTAINERS: adjust entry to tcan4x5x file split
====================
Link: https://lore.kernel.org/r/20210114075617.1402597-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tobias Waldekranz says:
====================
net: dsa: Link aggregation support
Start of by adding an extra notification when adding a port to a bond,
this allows static LAGs to be offloaded using the bonding driver.
Then add the generic support required to offload link aggregates to
drivers built on top of the DSA subsystem.
Finally, implement offloading for the mv88e6xxx driver, i.e. Marvell's
LinkStreet family.
Supported LAG implementations:
- Bonding
- Team
Supported modes:
- Isolated. The LAG may be used as a regular interface outside of any
bridge.
- Bridged. The LAG may be added to a bridge, in which case switching
is offloaded between the LAG and any other switch ports. I.e. the
LAG behaves just like a port from this perspective.
In bridged mode, the following is supported:
- STP filtering.
- VLAN filtering.
- Multicast filtering. The bridge correctly snoops IGMP and configures
the proper groups if snooping is enabled. Static groups can also be
configured. MLD seems to work, but has not been extensively tested.
- Unicast filtering. Automatic learning works. Static entries are
_not_ supported. This will be added in a later series as it requires
some more general refactoring in mv88e6xxx before I can test it.
v4 -> v5:
- Cleanup PVT configuration for LAGed ports in mv88e6xxx (Vladimir)
- Document dsa_lag_{map,unmap} (Vladimir)
====================
Link: https://lore.kernel.org/r/20210113084255.22675-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Packets ingressing on a LAG that egress on the CPU port, which are not
classified as management, will have a FORWARD tag that does not
contain the normal source device/port tuple. Instead the trunk bit
will be set, and the port field holds the LAG id.
Since the exact source port information is not available in the tag,
frames are injected directly on the LAG interface and thus do never
pass through any DSA port interface on ingress.
Management frames (TO_CPU) are not affected and will pass through the
DSA port interface as usual.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support offloading of LAGs to hardware. LAGs may be attached to a
bridge in which case VLANs, multicast groups, etc. are also offloaded
as usual.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Monitor the following events and notify the driver when:
- A DSA port joins/leaves a LAG.
- A LAG, made up of DSA ports, joins/leaves a bridge.
- A DSA port in a LAG is enabled/disabled (enabled meaning
"distributing" in 802.3ad LACP terms).
When a LAG joins a bridge, the DSA subsystem will treat that as each
individual port joining the bridge. The driver may look at the port's
LAG device pointer to see if it is associated with any LAG, if that is
required. This is analogue to how switchdev events are replicated out
to all lower devices when reaching e.g. a LAG.
Drivers can optionally request that DSA maintain a linear mapping from
a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the
desired size.
In the event that the hardware is not capable of offloading a
particular LAG for any reason (the typical case being use of exotic
modes like broadcast), DSA will take a hands-off approach, allowing
the LAG to be formed as a pure software construct. This is reported
back through the extended ACK, but is otherwise transparent to the
user.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a situation where a standalone port is indirectly attached to a
bridge (e.g. via a LAG) which is not offloaded, do not offload any
port attributes either. The port should behave as a standard NIC.
Previously, on mv88e6xxx, this meant that in the following setup:
br0
/
team0
/ \
swp0 swp1
If vlan filtering was enabled on br0, swp0's and swp1's QMode was set
to "secure". This caused all untagged packets to be dropped, as their
default VID (0) was not loaded into the VTU.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When creating a static bond (e.g. balance-xor), all ports will always
be enabled. This is set, and the corresponding notification is sent
out, before the port is linked to the bond upper.
In the offloaded case, this ordering is hard to deal with.
The lower will first see a notification that it can not associate with
any bond. Then the bond is joined. After that point no more
notifications are sent, so all ports remain disabled.
This change simply sends an extra notification once the port has been
linked to the upper to synchronize the initial state.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Ahern says:
====================
selftests: Updates to allow single instance of nettest for client and server
Update nettest to handle namespace change internally to allow a
single instance to run both client and server modes. Device validation
needs to be moved after the namespace change and a few run time
options need to be split to allow values for client and server.
v4
- really fix the memory leak with stdout/stderr buffers
v3
- send proper status in do_server for UDP sockets
- fix memory leak with stdout/stderr buffers
- new patch with separate option for address binding
- new patch to remove unnecessary newline
v2
- fix checkpath warnings
====================
Link: https://lore.kernel.org/r/20210114030949.54425-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add separate option to nettest to specify local address
binding in client mode.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new options to nettest to specify device binding and expected
device binding for server mode, and update fcnal-test script. This
is needed to allow a single instance of nettest running both server
and client modes to use different device bindings.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new option to nettest to specify MD5 password to use for client
side. Update fcnal-test script. This is needed for a single instance
running both server and client modes to test password mismatches.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nettest started with -r as the remote address for MD5 passwords.
The -m argument was added to use prefixes with a length when that
feature was added to the kernel. Since -r is used to specify
remote address for client mode, change nettest to only use -m
for MD5 passwords and update fcnal-test script.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a single instance of nettest is used for client and server
make sure address validation is only done for client mode.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few logging lines are missing the newline, or need it moved up for
cleaner logging.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a single instance of nettest is doing both client and
server modes, stdout and stderr messages can get interlaced
and become unreadable. Allocate a new set of buffers for the
child process handling server mode.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add option to nettest to run both client and server within a
single instance. Client forks a child process to run the server
code. A pipe is used for the server to tell the client it has
initialized and is ready or had an error. This avoid unnecessary
sleeps to handle such race when the commands are separately launched.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add options to specify server and client network namespace to
use before running respective functions.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 addresses can have a device name to declare a scope (e.g.,
fe80::5054:ff:fe12:3456%eth0). The next patch adds support to
switch network namespace before running client or server code
(or both), so move the address validation to the server and
client functions.
IPv4 multicast groups do not have the device scope in the address
specification, so they can be validated inline with option parsing.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
convert_addr needs to be invoked in a different location. Move
the code up to avoid a forward declaration.
Code move only.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
