Pull perf tools updates from Namhyung Kim:
"perf record:
- Introduce latency profiling using scheduler information.
The latency profiling is to show impacts on wall-time rather than
cpu-time. By tracking context switches, it can weight samples and
find which part of the code contributed more to the execution
latency.
The value (period) of the sample is weighted by dividing it by the
number of parallel execution at the moment. The parallelism is
tracked in perf report with sched-switch records. This will reduce
the portion that are run in parallel and in turn increase the
portion of serial executions.
For now, it's limited to profile processes, IOW system-wide
profiling is not supported. You can add --latency option to enable
this.
$ perf record --latency -- make -C tools/perf
I've run the above command for perf build which adds -j option to
make with the number of CPUs in the system internally. Normally
it'd show something like below:
$ perf report -F overhead,comm
...
#
# Overhead Command
# ........ ...............
#
78.97% cc1
6.54% python3
4.21% shellcheck
3.28% ld
1.80% as
1.37% cc1plus
0.80% sh
0.62% clang
0.56% gcc
0.44% perl
0.39% make
...
The cc1 takes around 80% of the overhead as it's the actual
compiler. However it runs in parallel so its contribution to
latency may be less than that. Now, perf report will show both
overhead and latency (if --latency was given at record time) like
below:
$ perf report -s comm
...
#
# Overhead Latency Command
# ........ ........ ...............
#
78.97% 48.66% cc1
6.54% 25.68% python3
4.21% 0.39% shellcheck
3.28% 13.70% ld
1.80% 2.56% as
1.37% 3.08% cc1plus
0.80% 0.98% sh
0.62% 0.61% clang
0.56% 0.33% gcc
0.44% 1.71% perl
0.39% 0.83% make
...
You can see latency of cc1 goes down to around 50% and python3 and
ld contribute a lot more than their overhead. You can use --latency
option in perf report to get the same result but ordered by
latency.
$ perf report --latency -s comm
perf report:
- As a side effect of the latency profiling work, it adds a new
output field 'latency' and a sort key 'parallelism'. The below is a
result from my system with 64 CPUs. The build was well-parallelized
but contained some serial portions.
$ perf report -s parallelism
...
#
# Overhead Latency Parallelism
# ........ ........ ...........
#
16.95% 1.54% 62
13.38% 1.24% 61
12.50% 70.47% 1
11.81% 1.06% 63
7.59% 0.71% 60
4.33% 12.20% 2
3.41% 0.33% 59
2.05% 0.18% 64
1.75% 1.09% 9
1.64% 1.85% 5
...
- Support Feodra mini-debuginfo which is a LZMA compressed symbol
table inside ".gnu_debugdata" ELF section.
perf annotate:
- Add --code-with-type option to enable data-type profiling with the
usual annotate output.
Instead of focusing on data structure, it shows code annotation
together with data type it accesses in case the instruction refers
to a memory location (and it was able to resolve the target data
type). Currently it only works with --stdio.
$ perf annotate --stdio --code-with-type
...
Percent | Source code & Disassembly of vmlinux for cpu/mem-loads,ldlat=30/pp (18 samples, percent: local period)
----------------------------------------------------------------------------------------------------------------------
: 0 0xffffffff81050610 <__fdget>:
0.00 : ffffffff81050610: callq 0xffffffff81c01b80 <__fentry__> # data-type: (stack operation)
0.00 : ffffffff81050615: pushq %rbp # data-type: (stack operation)
0.00 : ffffffff81050616: movq %rsp, %rbp
0.00 : ffffffff81050619: pushq %r15 # data-type: (stack operation)
0.00 : ffffffff8105061b: pushq %r14 # data-type: (stack operation)
0.00 : ffffffff8105061d: pushq %rbx # data-type: (stack operation)
0.00 : ffffffff8105061e: subq $0x10, %rsp
0.00 : ffffffff81050622: movl %edi, %ebx
0.00 : ffffffff81050624: movq %gs:0x7efc4814(%rip), %rax # 0x14e40 <current_task> # data-type: struct task_struct* +0
0.00 : ffffffff8105062c: movq 0x8d0(%rax), %r14 # data-type: struct task_struct +0x8d0 (files)
0.00 : ffffffff81050633: movl (%r14), %eax # data-type: struct files_struct +0 (count.counter)
0.00 : ffffffff81050636: cmpl $0x1, %eax
0.00 : ffffffff81050639: je 0xffffffff810506a9 <__fdget+0x99>
0.00 : ffffffff8105063b: movq 0x20(%r14), %rcx # data-type: struct files_struct +0x20 (fdt)
0.00 : ffffffff8105063f: movl (%rcx), %eax # data-type: struct fdtable +0 (max_fds)
0.00 : ffffffff81050641: cmpl %ebx, %eax
0.00 : ffffffff81050643: jbe 0xffffffff810506ef <__fdget+0xdf>
0.00 : ffffffff81050649: movl %ebx, %r15d
5.56 : ffffffff8105064c: movq 0x8(%rcx), %rdx # data-type: struct fdtable +0x8 (fd)
...
The "# data-type:" part was added with this change. The first few
entries are not very interesting. But later you can it accesses a
couple of fields in the task_struct, files_struct and fdtable.
perf trace:
- Support syscall tracing for different ABI. For example it can trace
system calls for 32-bit applications on 64-bit kernel
transparently.
- Add --summary-mode=total option to show global syscall summary. The
default is 'thread' to show per-thread syscall summary.
Python support:
- Add more interfaces to 'perf' module to parse events, and config,
enable or disable the event list properly so that it can implement
basic functionalities purely in Python. There is an example code
for these new interfaces in python/tracepoint.py.
- Add mypy and pylint support to enable build time checking. Fix some
code based on the findings from these tools.
Internals:
- Introduce io_dir__readdir() API to make directory traveral (usually
for proc or sysfs) efficient with less memory footprint.
JSON vendor events:
- Add events and metrics for ARM Neoverse N3 and V3
- Update events and metrics on various Intel CPUs
- Add/update events for a number of SiFive processors"
* tag 'perf-tools-for-v6.15-2025-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (229 commits)
perf bpf-filter: Fix a parsing error with comma
perf report: Fix a memory leak for perf_env on AMD
perf trace: Fix wrong size to bpf_map__update_elem call
perf tools: annotate asm_pure_loop.S
perf python: Fix setup.py mypy errors
perf test: Address attr.py mypy error
perf build: Add pylint build tests
perf build: Add mypy build tests
perf build: Rename TEST_LOGS to SHELL_TEST_LOGS
tools/build: Don't pass test log files to linker
perf bench sched pipe: fix enforced blocking reads in worker_thread
perf tools: Fix is_compat_mode build break in ppc64
perf build: filter all combinations of -flto for libperl
perf vendor events arm64 AmpereOneX: Fix frontend_bound calculation
perf vendor events arm64: AmpereOne/AmpereOneX: Mark LD_RETIRED impacted by errata
perf trace: Fix evlist memory leak
perf trace: Fix BTF memory leak
perf trace: Make syscall table stable
perf syscalltbl: Mask off ABI type for MIPS system calls
perf build: Remove Makefile.syscalls
...
If PYLINT=1 is passed to the build then run pylint over python code in
perf. Unlike shellcheck this isn't default on as there are currently
too many errors.
An example of an error:
```
************* Module setup
util/setup.py:19:0: C0301: Line too long (127/100) (line-too-long)
util/setup.py:20:0: C0301: Line too long (138/100) (line-too-long)
util/setup.py:63:0: C0301: Line too long (106/100) (line-too-long)
util/setup.py:1:0: C0114: Missing module docstring (missing-module-docstring)
util/setup.py:24:4: W0622: Redefining built-in 'vars' (redefined-builtin)
util/setup.py:11:4: C0103: Constant name "cc_options" doesn't conform to UPPER_CASE naming style (invalid-name)
util/setup.py:13:4: C0103: Constant name "cc_options" doesn't conform to UPPER_CASE naming style (invalid-name)
util/setup.py:15:34: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)
util/setup.py:18:0: C0116: Missing function or method docstring (missing-function-docstring)
util/setup.py:19:16: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)
util/setup.py:44:0: C0413: Import "from setuptools import setup, Extension" should be placed at the top of the module (wrong-import-position)
util/setup.py:46:0: C0413: Import "from setuptools.command.build_ext import build_ext as _build_ext" should be placed at the top of the module (wrong-import-position)
util/setup.py:47:0: C0413: Import "from setuptools.command.install_lib import install_lib as _install_lib" should be placed at the top of the module (wrong-import-position)
util/setup.py:49:0: C0115: Missing class docstring (missing-class-docstring)
util/setup.py:49:0: C0103: Class name "build_ext" doesn't conform to PascalCase naming style (invalid-name)
util/setup.py:52:8: W0201: Attribute 'build_lib' defined outside __init__ (attribute-defined-outside-init)
util/setup.py:53:8: W0201: Attribute 'build_temp' defined outside __init__ (attribute-defined-outside-init)
util/setup.py:55:0: C0115: Missing class docstring (missing-class-docstring)
util/setup.py:55:0: C0103: Class name "install_lib" doesn't conform to PascalCase naming style (invalid-name)
util/setup.py:58:8: W0201: Attribute 'build_dir' defined outside __init__ (attribute-defined-outside-init)
*-----------------------------------------------------------------
Your code has been rated at 6.67/10 (previous run: 6.51/10, +0.16)
make[4]: *** [util/Build:442: util/setup.py.pylint_log] Error 1
```
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If MYPY=1 is passed to the build then run mypy over python code in
perf. Unlike shellcheck this isn't default on as there are currently
too many errors.
An example of an error:
```
util/setup.py:8: error: Item "None" of "str | None" has no attribute "split" [union-attr]
util/setup.py:15: error: Item "None" of "IO[bytes] | None" has no attribute "readline" [union-attr]
util/setup.py:15: error: List item 0 has incompatible type "str | None"; expected "str | bytes | PathLike[str] | PathLike[bytes]" [list-item]
util/setup.py:16: error: Unsupported left operand type for + ("None") [operator]
util/setup.py:16: note: Left operand is of type "str | None"
util/setup.py:74: error: Unsupported left operand type for + ("None") [operator]
util/setup.py:74: note: Left operand is of type "str | None"
Found 5 errors in 1 file (checked 1 source file)
make[4]: *** [util/Build:430: util/setup.py.mypy_log] Error 1
```
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rather than generating individual syscall header files generate a
single trace/beauty/generated/syscalltbl.c. In a syscalltbls array
have references to each architectures tables along with the
corresponding e_machine. When the 32-bit or 64-bit table is ambiguous,
match the perf binary's type. For ARM32 don't use the arm64 32-bit
table which is smaller. EM_NONE is present for is no machine matches.
Conditionally compile the tables, only having the appropriate 32 and
64-bit table. If ALL_SYSCALLTBL is defined all tables can be
compiled.
Add comment for noreturn column suggested by Arnd Bergmann:
https://lore.kernel.org/lkml/d47c35dd-9c52-48e7-a00d-135572f11fbb@app.fastmail.com/
and added in commit 9142be9e64 ("x86/syscall: Mark exit[_group]
syscall handlers __noreturn").
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Building perf in-tree is broken after commit 890a1961c8 ("perf tools:
Create source symlink in perf object dir") which added a 'source' symlink
in the output dir pointing to the source dir.
With in-tree builds, the added 'SOURCE = ...' line is executed multiple
times (I observed 2 during the build plus 2 during installation). This is a
minor inefficiency, in theory not harmful because symlink creation is
assumed to be idempotent. But it is not.
Considering with in-tree builds:
srctree=/absolute/path/to/linux
OUTPUT=/absolute/path/to/linux/tools/perf
here's what happens:
1. ln -sf $(srctree)/tools/perf $(OUTPUT)/source
-> creates /absolute/path/to/linux/tools/perf/source
link to /absolute/path/to/linux/tools/perf
=> OK, that's what was intended
2. ln -sf $(srctree)/tools/perf $(OUTPUT)/source # same command as 1
-> creates /absolute/path/to/linux/tools/perf/perf
link to /absolute/path/to/linux/tools/perf
=> Not what was intended, not idempotent
3. Now the build _should_ create the 'perf' executable, but it fails
The reason is the tricky 'ln' command line. At the first invocation 'ln'
uses the 1st form:
ln [OPTION]... [-T] TARGET LINK_NAME
and creates a link to TARGET *called LINK_NAME*.
At the second invocation $(OUTPUT)/source exists, so 'ln' uses the 3rd
form:
ln [OPTION]... TARGET... DIRECTORY
and creates a link to TARGET *called TARGET* inside DIRECTORY.
Fix by adding -n/--no-dereference to "treat LINK_NAME as a normal file
if it is a symbolic link to a directory", as the manpage says.
Closes: https://lore.kernel.org/all/20241125182506.38af9907@booty/
Fixes: 890a1961c8 ("perf tools: Create source symlink in perf object dir")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20250124-perf-fix-intree-build-v1-1-485dd7a855e4@bootlin.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The variables to make builds silent/verbose live inside
tools/build/Makefile.build. Move those variables to the top-level
Makefile.perf to be generally available.
Committer testing:
See the SYSCALL lines, now they are consistent with the other
operations in other lines:
SYSTBL /tmp/build/perf-tools-next/arch/x86/include/generated/asm/syscalls_32.h
SYSTBL /tmp/build/perf-tools-next/arch/x86/include/generated/asm/syscalls_64.h
GEN /tmp/build/perf-tools-next/common-cmds.h
GEN /tmp/build/perf-tools-next/arch/arm64/include/generated/asm/sysreg-defs.h
PERF_VERSION = 6.13.rc2.g3d94bb6ed1d0
GEN perf-archive
MKDIR /tmp/build/perf-tools-next/jvmti/
MKDIR /tmp/build/perf-tools-next/jvmti/
MKDIR /tmp/build/perf-tools-next/jvmti/
MKDIR /tmp/build/perf-tools-next/jvmti/
GEN perf-iostat
CC /tmp/build/perf-tools-next/jvmti/libjvmti.o
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20250114-perf_make_test-v1-1-decc1c517b11@rivosinc.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Create a source symlink to the original source in the objdir.
This is similar to what the main kernel build script does.
Committer testing:
⬢[acme@toolbox perf-tools-next]$ make O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin
<SNIP>
⬢[acme@toolbox perf-tools-next]$ ls -la /tmp/build/perf-tools-next/source
lrwxrwxrwx. 1 acme acme 41 Aug 9 16:26 /tmp/build/perf-tools-next/source -> /home/acme/git/perf-tools-next/tools/perf
⬢[acme@toolbox perf-tools-next]$
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240807231823.898979-1-ak@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
empty-pmu-events.c exists so that builds may occur without python
being installed on a system. Manually updating empty-pmu-events.c to
be in sync with jevents.py is a pain, let's use jevents.py to generate
empty-pmu-events.c.
1) change jevents.py so that an arch and model of none cause
generation of a pmu-events.c without any json. Add a SPDX and
autogenerated warning to the start of the file.
2) change Build so that if a generated pmu-events.c for arch none and
model none doesn't match empty-pmu-events.c the build fails with a
cat of the differences. Update Makefile.perf to clean up the files
used for this.
3) update empty-pmu-events.c to match the output of jevents.py with
arch and mode of none.
Committer notes:
The firtst paragraph is confusing, so I asked and Ian further clarified:
---
The requirement for python hasn't changed.
Case 1: no python or NO_JEVENTS=1
Build happens using empty-pmu-events.c that is checked in, no python
is required.
Case 2: python
pmu-events.c is created by jevents.py (requiring python) and then built.
This change adds a step where the empty-pmu-events.c is created using
jevents.py and that file is diffed against the checked in version.
This stops the checked in empty-pmu-events.c diverging if changes are
made to jevents.py. If the diff causes the build to fail then you just
copy the diff empty-pmu-events.c over the checked in one.
---
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Sang <oliver.sang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philip Li <philip.li@intel.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240730191744.3097329-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On recent Linux distros like Ubuntu Noble and Debian Bookworm, the
'pkg-config-aarch64-linux-gnu' package is missing. As a result, the
aarch64-linux-gnu-pkg-config command is not available, which causes
build failures.
When a build passes the environment variables PKG_CONFIG_LIBDIR or
PKG_CONFIG_PATH, like a user uses make command or a build system
(like Yocto, Buildroot, etc) prepares the variables and passes to the
Perf's Makefile, the commit keeps these variables for package
configuration. Otherwise, this commit sets the PKG_CONFIG_LIBDIR
variable to use the Multiarch libs for the cross compilation.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: amadio@gentoo.org
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717082211.524826-2-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Merge fixes and updates in v6.10 into perf-tools-next to resolve changes
in synthesizing the LOST_SAMPLES records and build fixes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ingo reported that he was seeing these when hitting Control+C during a
perf tools build:
Makefile.perf:1149: *** Missing bpftool input for generating vmlinux.h. Stop.
The failure happens when you don't have vmlinux.h or vmlinux with BTF.
ifeq ($(VMLINUX_H),)
ifeq ($(VMLINUX_BTF),)
$(error Missing bpftool input for generating vmlinux.h)
endif
endif
VMLINUX_BTF can be empty if you didn't build a kernel or it doesn't have
a BTF section and the current kernel also has no BTF. This is totally
ok.
But VMLINUX_H should be set to the minimal version in the source tree
(unless you overwrite it manually) when you don't pass GEN_VMLINUX_H=1
(which requires VMLINUX_BTF should not be empty). The problem is that
it's defined in Makefile.config which is not included for `make clean`.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lore.kernel.org/lkml/CAM9d7ch5HTr+k+_GpbMrX0HUo5BZ11byh1xq0Two7B7RQACuNw@mail.gmail.com
Link: http://lore.kernel.org/lkml/ZjssGrj+abyC6mYP@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is only used to generate string tables, not to build perf, so move it
to the tools/perf/trace/beauty/include/ hierarchy, that is used just for
scraping.
This is a something that should've have happened, as happened with the
linux/socket.h scrapper, do it now as Ian suggested while doing an
audit/refactor session in the headers used by perf.
No other tools/ living code uses it, just <linux/vhost.h> coming from
either 'make install_headers' or from the system /usr/include/
directory.
Suggested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAP-5=fWZVrpRufO4w-S4EcSi9STXcTAN2ERLwTSN7yrSSA-otQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was using the first variation on producing a string representation
for a binary flag, one that used the system's stat.h and preprocessor
tricks that had to be updated everytime a new flag was introduced.
Use the more recent scrape script + strarray +
strarray__scnprintf_flags() combo.
$ tools/perf/trace/beauty/statx_mask.sh
static const char *statx_mask[] = {
[ilog2(0x00000001) + 1] = "TYPE",
[ilog2(0x00000002) + 1] = "MODE",
[ilog2(0x00000004) + 1] = "NLINK",
[ilog2(0x00000008) + 1] = "UID",
[ilog2(0x00000010) + 1] = "GID",
[ilog2(0x00000020) + 1] = "ATIME",
[ilog2(0x00000040) + 1] = "MTIME",
[ilog2(0x00000080) + 1] = "CTIME",
[ilog2(0x00000100) + 1] = "INO",
[ilog2(0x00000200) + 1] = "SIZE",
[ilog2(0x00000400) + 1] = "BLOCKS",
[ilog2(0x00000800) + 1] = "BTIME",
[ilog2(0x00001000) + 1] = "MNT_ID",
[ilog2(0x00002000) + 1] = "DIOALIGN",
[ilog2(0x00004000) + 1] = "MNT_ID_UNIQUE",
};
$
Now we need a copy of uapi/linux/stat.h from tools/include/ in the
scrape only directory tools/perf/trace/beauty/include.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20240320193115.811899-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was using the first variation on producing a string representation
for a binary flag, one that used the system's fcntl.h and preprocessor
tricks that had to be updated everytime a new flag was introduced.
Use the more recent scrape script + strarray + strarray__scnprintf_flags() combo.
$ tools/perf/trace/beauty/fs_at_flags.sh
static const char *fs_at_flags[] = {
[ilog2(0x100) + 1] = "SYMLINK_NOFOLLOW",
[ilog2(0x200) + 1] = "REMOVEDIR",
[ilog2(0x400) + 1] = "SYMLINK_FOLLOW",
[ilog2(0x800) + 1] = "NO_AUTOMOUNT",
[ilog2(0x1000) + 1] = "EMPTY_PATH",
[ilog2(0x0000) + 1] = "STATX_SYNC_AS_STAT",
[ilog2(0x2000) + 1] = "STATX_FORCE_SYNC",
[ilog2(0x4000) + 1] = "STATX_DONT_SYNC",
[ilog2(0x8000) + 1] = "RECURSIVE",
[ilog2(0x80000000) + 1] = "GETATTR_NOSEC",
};
$
Now we need a copy of uapi/linux/fcntl.h from tools/include/ in the
scrape only directory tools/perf/trace/beauty/include and will use that
fs_at_flags array for other fs syscalls.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20240320193115.811899-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was using the first variation on producing a string representation
for a binary flag, one that used the copy of uapi/linux/sched.h with
preprocessor tricks that had to be updated everytime a new flag was
introduced.
Use the more recent scrape script + strarray + strarray__scnprintf_flags() combo.
$ tools/perf/trace/beauty/clone.sh | head -5
static const char *clone_flags[] = {
[ilog2(0x00000100) + 1] = "VM",
[ilog2(0x00000200) + 1] = "FS",
[ilog2(0x00000400) + 1] = "FILES",
[ilog2(0x00000800) + 1] = "SIGHAND",
$
Now we can move uapi/linux/sched.h from tools/include/, that is used for
building perf to the scrape only directory tools/perf/trace/beauty/include.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZfnULIn3XKDq0bpc@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
