Pull pid_max namespacing update from Christian Brauner:
"The pid_max sysctl is a global value. For a long time the default
value has been 65535 and during the pidfd dicussions Linus proposed to
bump pid_max by default. Based on this discussion systemd started
bumping pid_max to 2^22. So all new systems now run with a very high
pid_max limit with some distros having also backported that change.
The decision to bump pid_max is obviously correct. It just doesn't
make a lot of sense nowadays to enforce such a low pid number. There's
sufficient tooling to make selecting specific processes without typing
really large pid numbers available.
In any case, there are workloads that have expections about how large
pid numbers they accept. Either for historical reasons or
architectural reasons. One concreate example is the 32-bit version of
Android's bionic libc which requires pid numbers less than 65536.
There are workloads where it is run in a 32-bit container on a 64-bit
kernel. If the host has a pid_max value greater than 65535 the libc
will abort thread creation because of size assumptions of
pthread_mutex_t.
That's a fairly specific use-case however, in general specific
workloads that are moved into containers running on a host with a new
kernel and a new systemd can run into issues with large pid_max
values. Obviously making assumptions about the size of the allocated
pid is suboptimal but we have userspace that does it.
Of course, giving containers the ability to restrict the number of
processes in their respective pid namespace indepent of the global
limit through pid_max is something desirable in itself and comes in
handy in general.
Independent of motivating use-cases the existence of pid namespaces
makes this also a good semantical extension and there have been prior
proposals pushing in a similar direction. The trick here is to
minimize the risk of regressions which I think is doable. The fact
that pid namespaces are hierarchical will help us here.
What we mostly care about is that when the host sets a low pid_max
limit, say (crazy number) 100 that no descendant pid namespace can
allocate a higher pid number in its namespace. Since pid allocation is
hierarchial this can be ensured by checking each pid allocation
against the pid namespace's pid_max limit. This means if the
allocation in the descendant pid namespace succeeds, the ancestor pid
namespace can reject it. If the ancestor pid namespace has a higher
limit than the descendant pid namespace the descendant pid namespace
will reject the pid allocation. The ancestor pid namespace will
obviously not care about this.
All in all this means pid_max continues to enforce a system wide limit
on the number of processes but allows pid namespaces sufficient leeway
in handling workloads with assumptions about pid values and allows
containers to restrict the number of processes in a pid namespace
through the pid_max interface"
* tag 'kernel-6.14-rc1.pid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
tests/pid_namespace: add pid_max tests
pid: allow pid_max to be set per pid namespace
Module functions can be set to set_ftrace_filter before the module is
loaded.
# echo :mod:snd_hda_intel > set_ftrace_filter
This will enable all the functions for the module snd_hda_intel. If that
module is not loaded, it is "cached" in the trace array for when the
module is loaded, its functions will be traced.
But this is not implemented in the kernel command line. That's because the
kernel command line filtering is added very early in boot up as it is
needed to be done before boot time function tracing can start, which is
also available very early in boot up. The code used by the
"set_ftrace_filter" file can not be used that early as it depends on some
other initialization to occur first. But some of the functions can.
Implement the ":mod:" feature of "set_ftrace_filter" in the kernel command
line parsing. Now function tracing on just a single module that is loaded
at boot up can be done.
Adding:
ftrace=function ftrace_filter=:mod:sna_hda_intel
To the kernel command line will only enable the sna_hda_intel module
functions when the module is loaded, and it will start tracing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250116175832.34e39779@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the :mod: command is written into /sys/kernel/tracing/set_event (or
that file within an instance), if the module specified after the ":mod:"
is not yet loaded, it will store that string internally. When the module
is loaded, it will enable the events as if the module was loaded when the
string was written into the set_event file.
This can also be useful to enable events that are in the init section of
the module, as the events are enabled before the init section is executed.
This also works on the kernel command line:
trace_event=:mod:<module>
Will enable the events for <module> when it is loaded.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250116143533.514730995@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a :mod: command to enable only events from a given module from the
set_events file.
echo '*:mod:<module>' > set_events
Or
echo ':mod:<module>' > set_events
Will enable all events for that module. Specific events can also be
enabled via:
echo '<event>:mod:<module>' > set_events
Or
echo '<system>:<event>:mod:<module>' > set_events
Or
echo '*:<event>:mod:<module>' > set_events
The ":mod:" keyword is consistent with the function tracing filter to
enable functions from a given module.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250116143533.214496360@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function graph tracer has become generic so that kretprobes and BPF
can use it along with function graph tracing itself. Some of the
infrastructure was specific for function graph tracing such as recording
the calltime and return time of the functions. Calling the clock code on a
high volume function does add overhead. The calculation of the calltime
was removed from the generic code and placed into the function graph
tracer itself so that the other users did not incur this overhead as they
did not need that timestamp.
The calltime field was still kept in the generic return entry structure
and the function graph return entry callback filled it as that structure
was passed to other code.
But this broke both irqsoff and wakeup latency tracer as they still
depended on the trace structure containing the calltime when the option
display-graph is set as it used some of those same functions that the
function graph tracer used. But now the calltime was not set and was just
zero. This caused the calculation of the function time to be the absolute
value of the return timestamp and not the length of the function.
# cd /sys/kernel/tracing
# echo 1 > options/display-graph
# echo irqsoff > current_tracer
The tracers went from:
# REL TIME CPU TASK/PID |||| DURATION FUNCTION CALLS
# | | | | |||| | | | | | |
0 us | 4) <idle>-0 | d..1. | 0.000 us | irqentry_enter();
3 us | 4) <idle>-0 | d..2. | | irq_enter_rcu() {
4 us | 4) <idle>-0 | d..2. | 0.431 us | preempt_count_add();
5 us | 4) <idle>-0 | d.h2. | | tick_irq_enter() {
5 us | 4) <idle>-0 | d.h2. | 0.433 us | tick_check_oneshot_broadcast_this_cpu();
6 us | 4) <idle>-0 | d.h2. | 2.426 us | ktime_get();
9 us | 4) <idle>-0 | d.h2. | | tick_nohz_stop_idle() {
10 us | 4) <idle>-0 | d.h2. | 0.398 us | nr_iowait_cpu();
11 us | 4) <idle>-0 | d.h1. | 1.903 us | }
11 us | 4) <idle>-0 | d.h2. | | tick_do_update_jiffies64() {
12 us | 4) <idle>-0 | d.h2. | | _raw_spin_lock() {
12 us | 4) <idle>-0 | d.h2. | 0.360 us | preempt_count_add();
13 us | 4) <idle>-0 | d.h3. | 0.354 us | do_raw_spin_lock();
14 us | 4) <idle>-0 | d.h2. | 2.207 us | }
15 us | 4) <idle>-0 | d.h3. | 0.428 us | calc_global_load();
16 us | 4) <idle>-0 | d.h3. | | _raw_spin_unlock() {
16 us | 4) <idle>-0 | d.h3. | 0.380 us | do_raw_spin_unlock();
17 us | 4) <idle>-0 | d.h3. | 0.334 us | preempt_count_sub();
18 us | 4) <idle>-0 | d.h1. | 1.768 us | }
18 us | 4) <idle>-0 | d.h2. | | update_wall_time() {
[..]
To:
# REL TIME CPU TASK/PID |||| DURATION FUNCTION CALLS
# | | | | |||| | | | | | |
0 us | 5) <idle>-0 | d.s2. | 0.000 us | _raw_spin_lock_irqsave();
0 us | 5) <idle>-0 | d.s3. | 312159583 us | preempt_count_add();
2 us | 5) <idle>-0 | d.s4. | 312159585 us | do_raw_spin_lock();
3 us | 5) <idle>-0 | d.s4. | | _raw_spin_unlock() {
3 us | 5) <idle>-0 | d.s4. | 312159586 us | do_raw_spin_unlock();
4 us | 5) <idle>-0 | d.s4. | 312159587 us | preempt_count_sub();
4 us | 5) <idle>-0 | d.s2. | 312159587 us | }
5 us | 5) <idle>-0 | d.s3. | | _raw_spin_lock() {
5 us | 5) <idle>-0 | d.s3. | 312159588 us | preempt_count_add();
6 us | 5) <idle>-0 | d.s4. | 312159589 us | do_raw_spin_lock();
7 us | 5) <idle>-0 | d.s3. | 312159590 us | }
8 us | 5) <idle>-0 | d.s4. | 312159591 us | calc_wheel_index();
9 us | 5) <idle>-0 | d.s4. | | enqueue_timer() {
9 us | 5) <idle>-0 | d.s4. | | wake_up_nohz_cpu() {
11 us | 5) <idle>-0 | d.s4. | | native_smp_send_reschedule() {
11 us | 5) <idle>-0 | d.s4. | 312171987 us | default_send_IPI_single_phys();
12408 us | 5) <idle>-0 | d.s3. | 312171990 us | }
12408 us | 5) <idle>-0 | d.s3. | 312171991 us | }
12409 us | 5) <idle>-0 | d.s3. | 312171991 us | }
Where the calculation of the time for each function was the return time
minus zero and not the time of when the function returned.
Have these tracers also save the calltime in the fgraph data section and
retrieve it again on the return to get the correct timings again.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250113183124.61767419@gandalf.local.home
Fixes: f1f36e22be ("ftrace: Have calltime be saved in the fgraph storage")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In the loop of __rb_map_vma(), the 's' variable is calculated from the
same logic that nr_pages is and they both come from nr_subbufs. But the
relationship is not obvious and there's a WARN_ON_ONCE() around the 's'
variable to make sure it never becomes equal to nr_subbufs within the
loop. If that happens, then the code is buggy and needs to be fixed.
The 'page' variable is calculated from cpu_buffer->subbuf_ids[s] which is
an array of 'nr_subbufs' entries. If the code becomes buggy and 's'
becomes equal to or greater than 'nr_subbufs' then this will be an out of
bounds hit before the WARN_ON() is triggered and the code exiting safely.
Make the 'page' initialization consistent with the code logic and assign
it after the out of bounds check.
Link: https://lore.kernel.org/20250110162612.13983-1-aha310510@gmail.com
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
[ sdr: rewrote change log ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently there are two ways of identifying an empty ring-buffer. One
relying on the current status of the commit / reader page
(rb_per_cpu_empty()) and the other on the write and read counters
(rb_num_of_entries() used in rb_get_reader_page()).
with rb_num_of_entries(). This intends to ease later
introduction of ring-buffer writers which are out of the kernel control
and with whom, the only information available is through the meta-page
counters.
Link: https://lore.kernel.org/20250108114536.627715-2-vdonnefort@google.com
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When kprobe multi bpf program can't be executed due to recursion check,
we currently return 0 (success) to fprobe layer where it's ignored for
standard kprobe multi probes.
For kprobe session the success return value will make fprobe layer to
install return probe and try to execute it as well.
But the return session probe should not get executed, because the entry
part did not run. FWIW the return probe bpf program most likely won't get
executed, because its recursion check will likely fail as well, but we
don't need to run it in the first place.. also we can make this clear
and obvious.
It also affects missed counts for kprobe session program execution, which
are now doubled (extra count for not executed return probe).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250106175048.1443905-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit ef1b808e3b ("bpf: Fix UAF via mismatching bpf_prog/attachment
RCU flavors") resolved a possible UAF issue in uprobes that attach
non-sleepable bpf prog by explicitly waiting for a tasks-trace-RCU grace
period. But, in the current implementation, synchronize_rcu_tasks_trace
is included within the mutex critical section, which increases the
length of the critical section and may affect performance. So let's move
out synchronize_rcu_tasks_trace from mutex CS.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250104013946.1111785-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since POLLIN will not be flushed until the hist file is read, the user
needs to repeatedly read() and poll() on the hist file for monitoring the
event continuously. But the read() is somewhat redundant when the user is
only monitoring for event updates.
Add POLLPRI poll event on the hist file so the event returns when a
histogram is updated after open(), poll() or read(). Thus it is possible
to wait for the next event without having to issue a read().
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173527248770.464571.2536902137325258133.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add poll syscall support on the `hist` file. The Waiter will be waken
up when the histogram is updated with POLLIN.
Currently, there is no way to wait for a specific event in userspace.
So user needs to peek the `trace` periodicaly, or wait on `trace_pipe`.
But it is not a good idea to peek at the `trace` for an event that
randomly happens. And `trace_pipe` is not coming back until a page is
filled with events.
This allows a user to wait for a specific event on the `hist` file. User
can set a histogram trigger on the event which they want to monitor
and poll() on its `hist` file. Since this poll() returns POLLIN, the next
poll() will return soon unless a read() happens on that hist file.
NOTE: To read the hist file again, you must set the file offset to 0,
but just for monitoring the event, you may not need to read the
histogram.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173527247756.464571.14236296701625509931.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the function tracing_set_tracer() switched over to using the guard()
infrastructure, it did not need to save the 'ret' variable and would just
return the value when an error arised, instead of setting ret and jumping
to an out label.
When CONFIG_TRACER_SNAPSHOT is enabled, it had code that expected the
"ret" variable to be initialized to zero and had set 'ret' while holding
an arch_spin_lock() (not used by guard), and then upon releasing the lock
it would check 'ret' and exit if set. But because ret was only set when an
error occurred while holding the locks, 'ret' would be used uninitialized
if there was no error. The code in the CONFIG_TRACER_SNAPSHOT block should
be self contain. Make sure 'ret' is also set when no error occurred.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250106111143.2f90ff65@gandalf.local.home
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202412271654.nJVBuwmF-lkp@intel.com/
Fixes: d33b10c0c7 ("tracing: Switch trace.c code over to use guard()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Pull ftrace fixes from Steven Rostedt:
- Add needed READ_ONCE() around access to the fgraph array element
The updates to the fgraph array can happen when callbacks are
registered and unregistered. The __ftrace_return_to_handler() can
handle reading either the old value or the new value. But once it
reads that value it must stay consistent otherwise the check that
looks to see if the value is a stub may show false, but if the
compiler decides to re-read after that check, it can be true which
can cause the code to crash later on.
- Make function profiler use the top level ops for filtering again
When function graph became available for instances, its filter ops
became independent from the top level set_ftrace_filter. In the
process the function profiler received its own filter ops as well.
But the function profiler uses the top level set_ftrace_filter file
and does not have one of its own. In giving it its own filter ops, it
lost any user interface it once had. Make it use the top level
set_ftrace_filter file again. This fixes a regression.
* tag 'ftrace-v6.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix function profiler's filtering functionality
fgraph: Add READ_ONCE() when accessing fgraph_array[]
Commit c132be2c4f ("function_graph: Have the instances use their own
ftrace_ops for filtering"), function profiler (enabled via
function_profile_enabled) has been showing statistics for all functions,
ignoring set_ftrace_filter settings.
While tracers are instantiated, the function profiler is not. Therefore, it
should use the global set_ftrace_filter for consistency. This patch
modifies the function profiler to use the global filter, fixing the
filtering functionality.
Before (filtering not working):
```
root@localhost:~# echo 'vfs*' > /sys/kernel/tracing/set_ftrace_filter
root@localhost:~# echo 1 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# sleep 1
root@localhost:~# echo 0 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# head /sys/kernel/tracing/trace_stat/*
Function Hit Time Avg
s^2
-------- --- ---- ---
---
schedule 314 22290594 us 70989.15 us
40372231 us
x64_sys_call 1527 8762510 us 5738.382 us
3414354 us
schedule_hrtimeout_range 176 8665356 us 49234.98 us
405618876 us
__x64_sys_ppoll 324 5656635 us 17458.75 us
19203976 us
do_sys_poll 324 5653747 us 17449.83 us
19214945 us
schedule_timeout 67 5531396 us 82558.15 us
2136740827 us
__x64_sys_pselect6 12 3029540 us 252461.7 us
63296940171 us
do_pselect.constprop.0 12 3029532 us 252461.0 us
63296952931 us
```
After (filtering working):
```
root@localhost:~# echo 'vfs*' > /sys/kernel/tracing/set_ftrace_filter
root@localhost:~# echo 1 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# sleep 1
root@localhost:~# echo 0 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# head /sys/kernel/tracing/trace_stat/*
Function Hit Time Avg
s^2
-------- --- ---- ---
---
vfs_write 462 68476.43 us 148.217 us
25874.48 us
vfs_read 641 9611.356 us 14.994 us
28868.07 us
vfs_fstat 890 878.094 us 0.986 us
1.667 us
vfs_fstatat 227 757.176 us 3.335 us
18.928 us
vfs_statx 226 610.610 us 2.701 us
17.749 us
vfs_getattr_nosec 1187 460.919 us 0.388 us
0.326 us
vfs_statx_path 297 343.287 us 1.155 us
11.116 us
vfs_rename 6 291.575 us 48.595 us
9889.236 us
```
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250101190820.72534-1-enjuk@amazon.com
Fixes: c132be2c4f ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In __ftrace_return_to_handler(), a loop iterates over the fgraph_array[]
elements, which are fgraph_ops. The loop checks if an element is a
fgraph_stub to prevent using a fgraph_stub afterward.
However, if the compiler reloads fgraph_array[] after this check, it might
race with an update to fgraph_array[] that introduces a fgraph_stub. This
could result in the stub being processed, but the stub contains a null
"func_hash" field, leading to a NULL pointer dereference.
To ensure that the gops compared against the fgraph_stub matches the gops
processed later, add a READ_ONCE(). A similar patch appears in commit
63a8dfb ("function_graph: Add READ_ONCE() when accessing fgraph_array[]").
Cc: stable@vger.kernel.org
Fixes: 37238abe3c ("ftrace/function_graph: Pass fgraph_ops to function graph callbacks")
Link: https://lore.kernel.org/20241231113731.277668-1-zilin@seu.edu.cn
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In order to catch a common bug where a TRACE_EVENT() TP_fast_assign()
assigns an address of an allocated string to the ring buffer and then
references it in TP_printk(), which can be executed hours later when the
string is free, the function test_event_printk() runs on all events as
they are registered to make sure there's no unwanted dereferencing.
It calls process_string() to handle cases in TP_printk() format that has
"%s". It returns whether or not the string is safe. But it can have some
false positives.
For instance, xe_bo_move() has:
TP_printk("move_lacks_source:%s, migrate object %p [size %zu] from %s to %s device_id:%s",
__entry->move_lacks_source ? "yes" : "no", __entry->bo, __entry->size,
xe_mem_type_to_name[__entry->old_placement],
xe_mem_type_to_name[__entry->new_placement], __get_str(device_id))
Where the "%s" references into xe_mem_type_to_name[]. This is an array of
pointers that should be safe for the event to access. Instead of flagging
this as a bad reference, if a reference points to an array, where the
record field is the index, consider it safe.
Link: https://lore.kernel.org/all/9dee19b6185d325d0e6fa5f7cbba81d007d99166.camel@sapience.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241231000646.324fb5f7@gandalf.local.home
Fixes: 65a25d9f7a ("tracing: Add "%s" check in test_event_printk()")
Reported-by: Genes Lists <lists@sapience.com>
Tested-by: Gene C <arch@sapience.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
dot2k suggests a list of changes to the kernel tree while adding a
monitor: edit tracepoints header, Makefile, Kconfig and moving the
monitor folder. Those changes can be easily run automatically.
Add a flag to dot2k to alter the kernel source.
The kernel source directory can be either assumed from the PWD, or from
the running kernel, if installed.
This feature works best if the kernel tree is a git repository, so that
its easier to make sure there are no unintended changes.
The main RV files (e.g. Makefile) have now a comment placeholder that
can be useful for manual editing (e.g. to know where to add new
monitors) and it is used by the script to append the required lines.
We also slightly adapt the file handling functions in dot2k: __open_file
is now called __read_file and also closes the file before returning the
content; __create_file is now a more general __write_file, we no longer
return on FileExistsError (not thrown while opening), a new
__create_file simply calls __write_file specifying the monitor folder in
the path.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20241227144752.362911-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
While creating a new monitor in RV, besides generating code from dot2k,
there are a few manual steps which can be tedious and error prone, like
adding the tracepoints, makefile lines and kconfig.
This patch restructures the existing monitors to keep some files in the
monitor's folder itself, which can be automatically generated by future
versions of dot2k.
Monitors have now their own Kconfig and tracepoint snippets. For
simplicity, the main tracepoint definition, is moved to the RV
directory, it defines only the tracepoint classes and includes the
monitor-specific tracepoints, which reside in the monitor directory.
Tracepoints and Kconfig no longer need to be copied and adapted from
existing ones but only need to be included in the main files.
The Makefile remains untouched since there's little advantage in having
a separated Makefile for each monitor with a single line and including
it in the main RV Makefile.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20241227144752.362911-6-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull probes fix from Masami Hiramatsu:
"Change the priority of the module callback of kprobe events so that it
is called after the jump label list on the module is updated.
This ensures the kprobe can check whether it is not on the jump label
address correctly"
* tag 'probes-fixes-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobe: Make trace_kprobe's module callback called after jump_label update
There are a couple functions in trace_events_synth.c that have "goto out"
or equivalent on error in order to release locks that were taken. This can
be error prone or just simply make the code more complex.
Switch every location that ends with unlocking a mutex on error over to
using the guard(mutex)() infrastructure to let the compiler worry about
releasing locks. This makes the code easier to read and understand.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20241219201346.371082515@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There are a couple functions in trace_events_filter.c that have "goto out"
or equivalent on error in order to release locks that were taken. This can
be error prone or just simply make the code more complex.
Switch every location that ends with unlocking a mutex on error over to
using the guard(mutex)() infrastructure to let the compiler worry about
releasing locks. This makes the code easier to read and understand.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20241219201346.200737679@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There are a few functions in trace_events_trigger.c that have "goto out" or
equivalent on error in order to release locks that were taken. This can be
error prone or just simply make the code more complex.
Switch every location that ends with unlocking a mutex on error over to
using the guard(mutex)() infrastructure to let the compiler worry about
releasing locks. This makes the code easier to read and understand.
Also use __free() for free a temporary buffer in event_trigger_regex_write().
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20241220110621.639d3bc8@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
