The driver started using the regulator subsystem and fails to build without
a dependeny on CONFIG_REGULATOR:
ERROR: modpost: "rdev_get_drvdata" [drivers/mmc/host/renesas_sdhi_core.ko] undefined!
ERROR: modpost: "devm_regulator_register" [drivers/mmc/host/renesas_sdhi_core.ko] undefined!
The 'select RESET_CONTROLLER' needs to either go away or get changed to a dependency
in order to avoid Kconfig dependency loops here. It also turns out the the superh
version needs neither RESET_CONTROLLER nor REGULATOR, and this works because
CONFIG_OF is not set there.
Change both to a 'depends on', but add '|| !OF' for the superh case.
Fixes: fae80a99dc ("mmc: renesas_sdhi: Add support for RZ/G3E SoC")
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250329164145.3194284-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
Pull block updates from Jens Axboe:
- Fixes for integrity handling
- NVMe pull request via Keith:
- Secure concatenation for TCP transport (Hannes)
- Multipath sysfs visibility (Nilay)
- Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
- Correct use of 64-bit BARs for pci-epf target (Niklas)
- Socket fix for selinux when used in containers (Peijie)
- MD pull request via Yu:
- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)
- Series cleaning up and fixing bugs in the bad block handling code
- Improve support for write failure simulation in null_blk
- Various lock ordering fixes
- Fixes for locking for debugfs attributes
- Various ublk related fixes and improvements
- Cleanups for blk-rq-qos wait handling
- blk-throttle fixes
- Fixes for loop dio and sync handling
- Fixes and cleanups for the auto-PI code
- Block side support for hardware encryption keys in blk-crypto
- Various cleanups and fixes
* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
nvme-tcp: fix selinux denied when calling sock_sendmsg
nvmet: pci-epf: Always configure BAR0 as 64-bit
nvmet: Remove duplicate uuid_copy
nvme: zns: Simplify nvme_zone_parse_entry()
nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
nvmet-fc: Remove unused functions
nvme-pci: remove stale comment
nvme-fc: Utilise min3() to simplify queue count calculation
nvme-multipath: Add visibility for queue-depth io-policy
nvme-multipath: Add visibility for numa io-policy
nvme-multipath: Add visibility for round-robin io-policy
nvmet: add tls_concat and tls_key debugfs entries
nvmet-tcp: support secure channel concatenation
nvmet: Add 'sq' argument to alloc_ctrl_args
nvme-fabrics: reset admin connection for secure concatenation
nvme-tcp: request secure channel concatenation
nvme-keyring: add nvme_tls_psk_refresh()
nvme: add nvme_auth_derive_tls_psk()
nvme: add nvme_auth_generate_digest()
...
Pull MMC updates from Ulf Hansson:
"MMC host:
- atmel-mci: Convert DT bindings to json schema
- dw_mmc: Add support for the Exynos7870 variant
- dw_mmc-rockchip: Add support for the RK3562/3528 variants
- omap: Fix potential memory leak in the probe error path
- renesas_sdhi: Add support for RZ/G3E variants
- sdhci: Disable SD card clock before changing parameters
- sdhci-esdhc-imx: Add support for the i.MX94 variant
- sdhci-of-dwcmshc: Add support for the RK3562/RK3528 variants
- sdhci-omap: Disable aggressive PM for eMMC/SD-cards
- sdhci-pci-core: Wait for VDD to settle on card power off
- sdhci-pxav3: Fix busy-signalling by using MMC_CAP_NEED_RSP_BUSY
- sunxi-mmc: Add support for the A523 variant
MEMSTICK:
- rtsx_usb_ms: Fix potential use-after-free during remove"
* tag 'mmc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: core: Remove redundant null check
mmc: host: Wait for Vdd to settle on card power off
mmc: omap: Fix memory leak in mmc_omap_new_slot
memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove
mmc: renesas_sdhi: fix error code in renesas_sdhi_probe()
mmc: sdhci-pxav3: set NEED_RSP_BUSY capability
mmc: sdhci-omap: Disable MMC_CAP_AGGRESSIVE_PM for eMMC/SD
tty: mmc: sdio: use bool for cts and remove parentheses
dt-bindings: mmc: sunxi: add compatible strings for Allwinner A523
dt-bindings: mmc: sunxi: Simplify compatible string listing
dt-bindings: mmc: sdhci-of-dwcmhsc: Add compatible string for RK3528
dt-bindings: mmc: rockchip-dw-mshc: Add compatible string for RK3528
mmc: renesas_sdhi: Add support for RZ/G3E SoC
dt-bindings: mmc: renesas,sdhi: Document RZ/G3E support
dt-bindings: mmc: rockchip-dw-mshc: Add support for rk3562
dt-bindings: mmc: Add support for rk3562 eMMC
mmc: core: Trim trailing whitespace from card product names
dt-bindings: mmc: atmel,hsmci: Convert to json schema
dt-bindings: mmc: mmc-slot: Make compatible property optional
dt-bindings: mmc: fsl-imx-esdhc: Add i.MX94 support
...
Pull gpio updates from Bartosz Golaszewski:
"There are no new drivers this time but several changes to the core
GPIO framework and various driver updates.
This release cycle, we're starting a relatively straightforward but
tedious rework of the GPIO consumer API: for historical reasons, the
gpiod_set_value() variants would return void. Not only that but the
GPIO provider interface does not even allow drivers to return a value
to GPIO core. This is because initial GPIO controllers would be MMIO
based and could not fail. We've had I2C, SPI and USB controllers for
years too but no way of indicating failures to callers.
This changes the consumer interface, adds new provider callbacks and
starts converting the drivers under drivers/gpio/ to using them. Once
this gets upstream, we'll keep on converting GPIO drivers that live
elsewhere and once there are no more users of the old callbacks, we'll
remove them and rename the new ones to the previous name. I imagine
the last step would happen in one sweeping change like what you did
for the remove_new() -> remove() renaming.
We've also addressed an issue where invalid return values from GPIO
drivers would get propagated to user-space by adding some
GPIO-core-level sanitization. Again: not a complex change but way
overdue.
Other than that: lots of driver and core refactoring, DT-bindings
changes and some other minor changes like coding style fixes or header
reordering.
GPIO core:
- add sanitization of return values of GPIO provider callbacks so
that invalid ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers
that return an integer and allow to indicate driver errors to the
GPIO core
- change the interface of all gpiod_set_value() variants to return an
integer thus becoming able to indicate failures in the underlying
layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler
interface to gpiod_set_array_value_cansleep() and use it across
several drivers treewide
- reduce the number of atomic reads of the descriptor flags in
gpiolib debugfs code
- simplify for_each_hwgpio_in_range() and
for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE
subsystem disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't
allow drivers to set it as it should only be handled by GPIO core
and start actually enforcing it in GPIO core for *all* drivers, not
only the ones implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its
device in order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the
new value setter callbacks
- convert several drivers to using automatic lock guards from
cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by()
and bits.h macros)
- refactor gpio-latch (use generic device properties, lock guards and
some local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from
GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO
devices into its own library
- use str_enable_disable(), str_high_low() and other string helpers
where applicable
- extend the gpio-mmio abstraction layer to allow calling into the
pinctrl back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list"
* tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (119 commits)
gpio: TODO: add an item to track reworking the sysfs interface
gpio: TODO: add an item to track the conversion to the new value setters
gpio: TODO: add delimiters between tasks for better readability
gpio: TODO: remove the pinctrl integration task
gpio: TODO: remove task duplication
gpio: TODO: remove the item about the new debugfs interface
gpio: da9055: use new line value setter callbacks
gpio: da9052: use new line value setter callbacks
gpio: cs5535: use new line value setter callbacks
gpio: crystalcove: use new line value setter callbacks
gpio: cros-ec: use new line value setter callbacks
gpio: creg-snps: use new line value setter callbacks
gpio: cgbc: use new line value setter callbacks
gpio: bt8xx: use new line value setter callbacks
gpio: bt8xx: use lock guards
gpio: bt8xx: allow to build the module with COMPILE_TEST=y
gpio: bd9571mwv: use new line value setter callbacks
gpio: bd71828: use new line value setter callbacks
gpio: bd71815: use new line value setter callbacks
gpio: bcm-kona: use new line value setter callbacks
...
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
The SD spec version 6.0 section 6.4.1.5 requires that Vdd must be
lowered to less than 0.5V for a minimum of 1 ms when powering off a
card. Increase wait to 15 ms so that voltage has time to drain down
to 0.5V and cards can power off correctly. Issues with voltage drain
time were only observed on Apollo Lake and Bay Trail host controllers
so this fix is limited to those devices.
Signed-off-by: Erick Shepherd <erick.shepherd@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250314195021.1588090-1-erick.shepherd@ni.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Qualcomm driver updates for v6.15
Improve the client interface for the Qualcomm ICE driver to avoid
leaking references, including fixing the client drivers to call the new
function.
Adopt str_on_off() helper in AOSS driver and mark non-global servreg QMI
element info array in the PDR driver static.
* tag 'qcom-drivers-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: Do not expose internal servreg_location_entry_ei array
soc: qcom: ice: make of_qcom_ice_get() static
scsi: ufs: qcom: fix dev reference leaked through of_qcom_ice_get
mmc: sdhci-msm: fix dev reference leaked through of_qcom_ice_get
soc: qcom: ice: introduce devm_of_qcom_ice_get
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM8750 compatible
soc: qcom: Use str_enable_disable-like helpers
Link: https://lore.kernel.org/r/20250317210158.2025380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge the mmc fixes for v6.14-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.15.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.14-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.15.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The SDHI/eMMC IPs in the RZ/G3E SoC are similar to those in R-Car Gen3.
However, the RZ/G3E SD0 channel has Voltage level control and PWEN pin
support via SD_STATUS register.
internal regulator support is added to control the voltage levels of
the SD pins via sd_iovs/sd_pwen bits in SD_STATUS register by populating
vqmmc-regulator child node.
SD1 and SD2 channels have gpio regulator support and internal regulator
support. Selection of the regulator is based on the regulator phandle.
Similar case for SD0 fixed voltage (eMMC) that uses fixed regulator and
SD0 non-fixed voltage (SD0) that uses internal regulator.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250305092958.21865-3-biju.das.jz@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Product names for some eMMC chips can include trailing whitespace, which
seems to be rather uncommon, but makes emitted messages and /sys properties
somewhat unsightly. Here's such an example from a Pine64 PineNote, in which
"Biwin ", as the eMMC product name, contains trailing whitespace:
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Biwin 115 GiB
mmcblk0: p1 p2 p3 p4 p5 p6 p7
mmcblk0boot0: mmc0:0001 Biwin 4.00 MiB
mmcblk0boot1: mmc0:0001 Biwin 4.00 MiB
mmcblk0rpmb: mmc0:0001 Biwin 4.00 MiB, chardev (249:0)
Trailing whitespace in /sys properties may even cause some unforeseen issues
with some scripts, so let's have the trailing whitespace trimmed in product
names for eMMC chips. Although not observed yet by the author of these
changes, the same trailing whitespace may appear in SD card product names,
so let's trim them as well, which can't hurt.
Touch-up one comment as well, by using proper capitalization.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Avri Altman <avri.altman@sandisk.com>
Link: https://lore.kernel.org/r/fb7fcecae737f3e8b279854d7c853000527cba9a.1740597891.git.dsimic@manjaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To prevent keys from being compromised if an attacker acquires read
access to kernel memory, some inline encryption hardware can accept keys
which are wrapped by a per-boot hardware-internal key. This avoids
needing to keep the raw keys in kernel memory, without limiting the
number of keys that can be used. Such hardware also supports deriving a
"software secret" for cryptographic tasks that can't be handled by
inline encryption; this is needed for fscrypt to work properly.
To support this hardware, allow struct blk_crypto_key to represent a
hardware-wrapped key as an alternative to a raw key, and make drivers
set flags in struct blk_crypto_profile to indicate which types of keys
they support. Also add the ->derive_sw_secret() low-level operation,
which drivers supporting wrapped keys must implement.
For more information, see the detailed documentation which this patch
adds to Documentation/block/inline-encryption.rst.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sm8650
Link: https://lore.kernel.org/r/20250204060041.409950-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For hs400(es) mode, the 'hs400-ds-delay' is typically configured in the
dts. However, some projects may only define 'mediatek,hs400-ds-dly3',
which can lead to initialization failures in hs400es mode. CMD13 reported
response crc error in the mmc_switch_status() just after switching to
hs400es mode.
[ 1.914038][ T82] mmc0: mmc_select_hs400es failed, error -84
[ 1.914954][ T82] mmc0: error -84 whilst initialising MMC card
Currently, the hs400_ds_dly3 value is set within the tuning function. This
means that the PAD_DS_DLY3 field is not configured before tuning process,
which is the reason for the above-mentioned CMD13 response crc error.
Move the PAD_DS_DLY3 field configuration into msdc_prepare_hs400_tuning(),
and add a value check of hs400_ds_delay to prevent overwriting by zero when
the 'hs400-ds-delay' is not set in the dts. In addition, since hs400(es)
only tune the PAD_DS_DLY1, the PAD_DS_DLY2_SEL bit should be cleared to
bypass it.
Fixes: c4ac38c653 ("mmc: mtk-sd: Add HS400 online tuning support")
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250123092644.7359-1-andy-ld.lu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This reverts commit 941a7abd46.
This commit uses presence of device-tree properties vmmc-supply and
vqmmc-supply for deciding whether to enable a quirk affecting timing of
clock and data.
The intention was to address issues observed with eMMC and SD on AM62
platforms.
This new quirk is however also enabled for AM64 breaking microSD access
on the SolidRun HimmingBoard-T which is supported in-tree since v6.11,
causing a regression. During boot microSD initialization now fails with
the error below:
[ 2.008520] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit
[ 2.115348] mmc1: error -110 whilst initialising SD card
The heuristics for enabling the quirk are clearly not correct as they
break at least one but potentially many existing boards.
Revert the change and restore original behaviour until a more
appropriate method of selecting the quirk is derived.
Fixes: 941a7abd46 ("mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch")
Closes: https://lore.kernel.org/linux-mmc/a70fc9fc-186f-4165-a652-3de50733763a@solid-run.com/
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250127-am654-mmc-regression-v2-1-9bb39fb12810@solid-run.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull MMC updates from Ulf Hansson:
"MMC core:
- Share a helper to convert from crypto_profile to mmc_host
- Respect quirk_max_rate for non-UHS SDIO card too
MMC host:
- Add DT bindings for the mmc-slot
- Clarify DT bindings for the mmc-controller
- bcm2835: Add support for system-wide suspend/resume PM
- dw_mmc-exynos: Add support for the exynos8895 variant
- meson-mx-sdio: Convert DT bindings to dtschema
- mtk-sd: Fixup use of two register ranges
- mtk-sd: Add support for ignoring cmd response CRC
- sdhci-esdhc-imx: enable 'SDHCI_QUIRK_NO_LED' quirk for S32G
- sdhci-msm: Correctly set the load for the regulator
- sdhci-msm: Convert to use custom crypto profile
- sdhci-of-at91: Add support for the microchip sama7d65 variant"
* tag 'mmc-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits)
mmc: sdhci-msm: Correctly set the load for the regulator
mmc: hi3798mv200: Use syscon_regmap_lookup_by_phandle_args
mmc: Use of_property_present() for non-boolean properties
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8895
mmc: sdhci-msm: convert to use custom crypto profile
mmc: crypto: add mmc_from_crypto_profile()
mmc: mtk-sd: Limit getting top_base to SoCs that require it
dt-bindings: mmc: mtk-sd: Document compatibles that need two register ranges
mmc: sdhci-acpi: Use devm_platform_ioremap_resource()
mmc: sdhci-acpi: Remove not so useful error message
dt-bindings: mmc: convert amlogic,meson-mx-sdio.txt to dtschema
dt-bindings: mmc: document mmc-slot
dt-bindings: mmc: controller: remove '|' when not needed
dt-bindings: mmc: controller: move properties common with slot out to mmc-controller-common
dt-bindings: mmc: controller: clarify the address-cells description
mmc: bcm2835: add suspend/resume pm support
dt-bindings: Drop Bhupesh Sharma from maintainers
mmc: core: don't include 'pm_wakeup.h' directly
mmc: mtk-sd: Add support for ignoring cmd response CRC
mmc: core: Introduce the MMC_RSP_R1B_NO_CRC response
...
Pull block updates from Jens Axboe:
- NVMe pull requests via Keith:
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)
- MD pull requests via Song:
- Reintroduce md-linear (Yu Kuai)
- md-bitmap refactor and fix (Yu Kuai)
- Replace kmap_atomic with kmap_local_page (David Reaver)
- Quite a few queue freeze and debugfs deadlock fixes
Ming introduced lockdep support for this in the 6.13 kernel, and it
has (unsurprisingly) uncovered quite a few issues
- Use const attributes for IO schedulers
- Remove bio ioprio wrappers
- Fixes for stacked device atomic write support
- Refactor queue affinity helpers, in preparation for better supporting
isolated CPUs
- Cleanups of loop O_DIRECT handling
- Cleanup of BLK_MQ_F_* flags
- Add rotational support for null_blk
- Various fixes and cleanups
* tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux: (106 commits)
block: Don't trim an atomic write
block: Add common atomic writes enable flag
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
block: limit disk max sectors to (LLONG_MAX >> 9)
block: Change blk_stack_atomic_writes_limits() unit_min check
block: Ensure start sector is aligned for stacking atomic writes
blk-mq: Move more error handling into blk_mq_submit_bio()
block: Reorder the request allocation code in blk_mq_submit_bio()
nvme: fix bogus kzalloc() return check in nvme_init_effects_log()
md/md-bitmap: move bitmap_{start, end}write to md upper layer
md/raid5: implement pers->bitmap_sector()
md: add a new callback pers->bitmap_sector()
md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()
md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()
md: Replace deprecated kmap_atomic() with kmap_local_page()
md: reintroduce md-linear
partitions: ldm: remove the initial kernel-doc notation
blk-cgroup: rwstat: fix kernel-doc warnings in header file
blk-cgroup: fix kernel-doc warnings in header file
nbd: fix partial sending
...
Qualcomm regulator supports two power supply modes: HPM and LPM.
Currently, the sdhci-msm.c driver does not set the load to adjust
the current for eMMC and SD. If the regulator dont't set correct
load in LPM state, it will lead to the inability to properly
initialize eMMC and SD.
Set the correct regulator current for eMMC and SD to ensure that the
device can work normally even when the regulator is in LPM.
Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250114083514.258379-1-quic_yuanjiey@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data. Dtschema and Devicetree bindings offer the
static/build-time check for this already.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/20250111185410.183896-1-krzysztof.kozlowski@linaro.org>/
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
BLK_MQ_F_SHOULD_MERGE is set for all tag_sets except those that purely
process passthrough commands (bsg-lib, ufs tmf, various nvme admin
queues) and thus don't even check the flag. Remove it to simplify the
driver interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241219060214.1928848-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As is being done in ufs-qcom, make the sdhci-msm driver override the
full crypto profile rather than "just" key programming and eviction.
This makes it much more straightforward to add support for
hardware-wrapped inline encryption keys. It also makes it easy to pass
the original blk_crypto_key down to qcom_ice_program_key() once it is
updated to require the key in that form.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Message-ID: <20241213041958.202565-8-ebiggers@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.13-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.14.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently the mtk-sd driver tries to get and map the second register
base, named top_base in the code, regardless of whether the SoC model
actually has it or not. This produces confusing big error messages on
the platforms that don't need it:
mtk-msdc 11260000.mmc: error -EINVAL: invalid resource (null)
Limit it to the platforms that actually require it, based on their
device tree entries, and properly fail if it is missing.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20241210073212.3917912-3-wenst@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.13-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.14.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
